|
| 1 | Taking down Chowkhat or frames with shutters (without taking off shutters from the frame) but in exc 1.5 sqm and not exceding 4.0 Sqm each complete all as specified and directed. |
| 2 | S&F lead lining shutter for door comprising 2 mm thick lead lining sheet sand witched between 18 mm and 12 mm thick BWR grade ply wood on both the sides including Provn of 2nd class HW frame cross section 120 (100mm+2mm lead sheet+18 mm)x70 mm and size as per site. The exposed surfaces of door and shutter shall be covered with 1 mm thick decorativer lamination sheet with necessary SS builders hardware such as ball bearing hinges, handels, tower bolts, sliding bolts and heavy duty hydraulic door closer complete all as speified and as directed. |
| 3 | M&L for barium plaster of internal surfaces 20 to 25mm thickness with the mixture of 25% : 65% : 10% ratio barium, sand and cement and plumb, Cement, sand Ratio (as per specified) on Celing, Rates to include applications on all type of surfaces at all levels and providing and fixing galvanized chicken mesh 300mm wide and 0.5mm thick. Mesh to be properly streched and nailed ensuring equal thickness of plaster on both sides of the mesh with necessary plaster grooves as per design, etc. Work shall be executed with all materials needed to finish the surfaces accordings to specifications, drawings, Engg standards complete all as speified and as directed. |
| 4 | M&L for Brick work with fly ash bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 with old size brick. |
| 5 | M&L for Rendering 15mm thick cement plaster other than fair faces of brick work or concrete surfaces in CM 1:6 rendering is to be finished even and smooth without using extra cement adding water proofing compound 3% by weight of cement (water proofing compound shall bemeasured and paid separately). |
| 6 | M&L for appling two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/liter and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint required shade (Company Depot Tinted) with silicon additives @ 1.43 liters/10sqm over and including priming coat of exterior primer applied @ 0.90 liter/10sqm over new surfaces. |
| 7 | M&L for preparing plastered surfaces and applying two coats of oil bound distempered over one coat of primer including preparatory work with including and applying 3mm thick wall care putty to distempered on surfaces of walls complete all as specified and directed |
| 8 | Site clearance in soft/loose soil all n.exc 15cm deep all as specified and directed |
| 9 | M&L for hard core of gauge n.exc 63mm, deposite, spread and levelled inlayers nexc 15cm thick watered and rammed to a true surfaces of broken stone or boulder. |
| 10 | M&L for cement concrete type D2 1:4:8 (40mm Graded aggregate) 75mm thick as in sub base |
| 11 | M&L for 60 mm thick M-35 grade precast colored cement concrete interlocking paving tiles rubber mouleded of any size and shape confirmin to IS 15658-2006 and ISI marked as in pavement laid on 30mm thick stone dust cushion laid dry all as per manufacturers instructions complete all as specified and directed. |
| 12 | S&F inverter air conditioner electric driven single phase of capacity 2 TR, BEE 5 star rated (latest) with ISEER 5 W/W complete with control remote, stranded copper cable of appropriate size of 3m long upto power point intitially filling of refrigerant and installation of outdoor and indoor unit (without fixing bracket) with suitable size of inlet and outlet copper tubing with proper isulation with required size nad length fixing drain pipe making hole on wall, testing the same after commissioning as recommended and directed. Specification of air conditioner is as under:-Tonnage : 2 TRRefrigerent Gas : R32 (Non CFC)Power Supply : 230 Volt/ 50 Hz single phase.Condensor coil : CopperConnected pipe : 5 mRated cooling cap : 6050 Watt.Connected cable : Copper with appropriate size 3 m.Air flow volume indoor : 950 CMH. |
| 13 | S&F Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170V to 250V with output Voltage stabilzed at 230V with accuracy of +- 2.5% suitable for 2 TR Split AC. |
| 14 | Point wiring with 1.5 Sqmm (22/0.30mm) PVC insulated and unsheathed multistranded copper conductor cable, 1100 Volts grade, ISI marked, FRLS type drawn through and including PVC casing and caping (ISI marked) of adequate size and its accessories with PVC boxes of adequate size, with modular cover plate with frame of required modules for one light or one fan point controlled by one switch including 1.5 Sqmm (nominal area) copper conductor cable (multistrand), FRLS type, PVC insulated and unsheathed with colour code earth wire connected to common earth dolly at one end and metalic bodies of luminaires/ fan at other end complete all as specified and directed for One light point and one fan point controlled by one, one way swtich |
| 15 | All as per Ser item No.13 above but with 2.5 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 6 pin socket outlet point including PVC cable 2.5 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to commen earth & earth terminals including Fibre insulation boards, treated on one face only of adequate size for mounting purposes. |
| 16 | S&F of switch modular type 6 Amps one way, 1 module, AC 230 Volts, shrouded terminal, ISI marked complete all as specified and directed. |
| 17 | S&F ceiling rose surface PVC 50mm dia 3 terminals including PVC mounting block white/ivory finish. |
| 18 | S&F of sheet metal enclosures with plug socket single pole and neutral with two pin and earth plug and with one MCB of 20 Amps (SP) complete all as specified. |
| 19 | S&F submain wirng with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100 Volts grade, FRLS type, cables 4 Sqmm drawn through in and including PVC heavy duty surface casing caping including 4 Sqmm 1100 Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. |
| 20 | S&F distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240 Volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 8 ways all as specified & directed. |
| 21 | S&F of MCB DP/SPN 6-32 Amps, 230 Volts, 50 Hz with 10 kA. |
| 22 | S&F of MCB SP 6-32 Amps, 230 Volts, 50 Hz with 10 kA. |
| 23 | M&L for Chemical Earthing complete with copper earth plate electrode 900x600x5 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of plate not less than 1.5 m below ground level connecting to the Copper earth strip 32x6mm by means nut bolt, nuts, check nuts and washer of the copper Earth strip protected by provision of GI light grade pipe 40 mm incl provision of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregated with 40 mm thick cover with RCC (1:2:4) reinforced with XPM (weight not less than 4 kg/sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 m long placed on top edge of earth plate, with ground enhancing backfill compound (Safe ground). The charastricts of this compound is highly conductive, hygroscopic, non magnetic, non corrosive in nature and have best moisture retaining qualities. (Each earthing = 25 kgs 4 bag), test point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 m, all as per SSR Part I 2009 and connection to earth test point all as specified incl testing on completion”. |
| 24 | S&F of 35 Watt LED street light fitting luminaire, energy saving and environmental friendly long life LED security light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with bracket of adequate size complte IP66 protection and impact resistance of IK08.E68, including coneecting up with 2/3 core flexible coppper conductor cable, compete all as specified and directed. |
| 25 | S&F Voltage stabilizer for automatic operation, capacity 5 kVA, single phase naturally air cooled indoor type, capacity 15 Amps & designed for input variation between 90V to 300V with output Voltage stabilzed at 230V with accuracy of +- 2.5%, application on main line complete all as specified and directed. |
| 26 | S&F of LED bulkhead 10 Watt 220 Volts AC with high efficacy PMMA diffuser soft glare free light complete with drivers, clamps complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. |
| 27 | NOTE : - AMOUNT OF SCHEDULE OF CREDIT Rs. 350.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ. Please Enable Macros to View BoQ information |
