|
| 1 | Taking down cement or cement lime plaster any description on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc and rubbish off the premises complete all as specified & directed. |
| 2 | M&L for 15 mm thick rendering in cement mortar (1:4) on brick / concrete/ stone surfaces finished even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately under appropriate item of BOQ as \\"supply only \\" |
| 3 | M&L for 15 mm thick rendering in cement mortar (1:6) on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 4 | Supply only Integral waterproofing compound complete all as specified and directed |
| 5 | M&L for rendering 5 mm thick on fair faces of concrete surfaces in CM (1:3) in ceiling complete all as specified and directed. |
| 6 | M&L for prepration of newly plastered wall surfaces & applying necessary levelling course to the surfaces of walls and applying two coat of interior of oil emulsion over a coat of wall primer incuding wall care putty complete all as specified & directed. |
| 7 | M&L for applying three coats of white wash on newly plastered ceiling surfaces including preparation of surfaces complete all as specified & directed. |
| 8 | M&L for preparation of the newly plastered surfaces of wall & applying 3 coats of white wash on wall surfaces complete all as specified and directed. |
| 9 | M&L for prepration of newly plastered wall surfaces & applying necessary levelling course to the surfaces of wallssmooth with sand paper and finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm including one coat of putty ) including properly making of v shape crakes and filling of all crakes with crakes seal of walls complete all as specified and directed. |
| 10 | M&L for complete removal of existing treatment on wall and prepration of old surfaces & M&L for applying necessary levelling course to the surfaces including properly making of v shape crakes and filling of all crakes with crakes seal and including applying two coat of interior oil emulsion over a coat of wall primer incuding wall care putty complete all as specified and directed. |
| 11 | M&L for complete removal of existing treatment on walls and prepration of old surfaces smooth with sand paper and finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm including one coat of putty ) including properly making of v shape crakes and filling of all crakes with crakes seal of walls complete all as specified and directed. |
| 12 | Material and labour for Preparation of old decorated surface of walls of plastered or unplastered surfaces by brooming down or steel wire brushing, scarping down smoke soot, moulds, moss and efflorescent salts treating oil and greasy spots and applying TWO coat of white wash complete all as specified and directed by Engineer -in-Charge. |
| 13 | Material and labour for Preparing of old decorated surface of Ceilings of plastered or unplastered surfaces by brooming down or steel wire brushing, scarping down smoke soot, moulds, moss and efflorescent salts treating oil and greasy spots and applying TWO coat of white wash complete all as specified and directed by Engineer -in-Charge. |
| 14 | Material and labour for Preparing of old decorated surface of walls of plastered or unplastered surfaces by brooming down or steel wire brushing, scarping down smoke soot, moulds, moss and efflorescent salts treating oil and greasy spots and applying TWO coat of oil distemper complete all as specified and directed by Engineer -in-Charge. |
| 15 | Material and labour for prepration old or untreated surfaces of wood or wood based surfaces and applyingone coat of synthetic enamel paint over a prime coat of pink primer on surfaces of any desription, not otherwise described, over 10 cm width or girth complete all as specified and directed by Engineer -in-Charge. |
| 16 | Material and labour for applying one coat of synthetic enamel paint on steel or iron surfaces of any decription, over 10 cm in width or grith, not othewise described including preparation of surfaces and over a coat of red oxide complete all as specified and directed by Engineer -in-Charge. |
| 17 | Material and labour for preparation of surfaces of wall, chhajjasetc and applying one coat of premium acrylic exterior anti algal fungal emulsion paint over one coat of weather coat exterier primer on wall all as direced by Engr-in-Charge. Make: Aisan Apex Ultima/ Berger weather coat All Guard or equivelent in other make |
| 18 | M&L for preparation surfaces for building Nos and applying one coat of synthetic enamel paint and writing letters or figures (Block, Roman, Italic or Indian) of n exc 10cm height, width of letter shall not be less than 15mm, including stops, commas, lines, brackets and making outer boarder with approved tint of synthetic enamel thick paint complete all as specified and as directed. |
| 19 | Dismantling floor, hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and directed. |
| 20 | Demolition of cement concrete unreinforced in ground floor and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 21 | Dismantiling of stone slabs and tiles (Kota stone etc.) of any discription or any thickness in floors, aprons, skirting, dado, pcc tiles at roof etc. laid bedded and pointed in any mortar complete all as specified and directed. |
| 22 | M&L for 25 mm thick PCC (1:2:4) type B-0 using 12.5 mm graged stone aggregate as in floors, etc complete all as specified and directed.. |
| 23 | M&L for vitrified ,coloured and printed tiles of 8 to 10 mm thick (Square / Rectangular ) polished area of each tiles exceeding 0.42 Sqm but not exceeding 1.00 sqm as in flooring over and including 15 mm thick cement screed in (1:6 ) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed. |
| 24 | M&L for vitrified ,coloured and printed tiles of 8 to 10 mm thick as in skirting fixed over and including 10 mm thick backing coat in (1:4 ) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed. |
| 25 | M&L non-skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match coiour/shade with & including 15mm thick screed bed layer in CM 1:6 complete all as specified |
| 26 | M&L glazed ceramic joint free coloured tiles on vertical surfaces size not less than 600mm x 300mm x 7mm thick over & including 10mm thick rendering in CM 1:4 and pointed in white/coloured cement to match the shade /colour of tiles complete all as specified & directed. Note:- Pattern of tiles shall be as approved by GE. |
| 27 | M&L for machine cut Kota stone slab 18 mm to 22 mm thick , as in flooring , laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing , over and including screed bed or bedding layer of mortar 20 mm thick in cement mortar (1:6 ) complete all as specified and directed. |
| 28 | M&L for machine cut kota stone slab 18 mm -22 mm thick as in riser / steps, skirting, dado,cills and pillars laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing , rounding ,over and including 10 mm thick backing coat in CM (1:4) complete all as specified and directed. |
| 29 | M&L for vitrified ,coloured and printed tiles of 8 to 10 mm thick (Square / Rectangular ) polished area of each tiles not exceeding 0.36 Sqm as in flooring over and including 15 mm thick cement screed in (1:6 ) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed. |
| 30 | M&L for vitrified ,coloured and printed tiles of width as directed and 8 to 9 mm thick as in skirting fixed over and including 10 mm thick backing coat in (1:4 ) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed. |
| 31 | M&L for non skid ceramic tiles, joint free, coloured tiles 7mm to 8 mm thick (Square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set over and including 15 mm thick cement screed in (1:4) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed. |
| 32 | M&L for ceramic tiles, joint free, coloured tiles 7mm to 8 mm mm thick as in skirting fixed over and including 10 mm thick cement screed in (1:4) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.with the colour of tiles complete all as specified and directed. |
| 33 | M&L 18-20 mm thick pre-polished Granite slab, machine cut, for floors/ shelves, cooking platforms, window cills, steps, jambs and pillar top laid over & including 20mm thick screed in CM 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone complete all as specified & directed. |
| 34 | M&L for rounding, chamfer, splays or arris and smooth finishing at the edges of stone as in steps, cooking platform and other similar locations complete all as specified and directed. |
| 35 | Taking down chowkhat or frame (without taking off shutter from the frame) not exceeding 1.5 Square Metre each , removing from the site Cutting holes exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and as directed. |
| 36 | Taking down chowkhat or frame (without taking off shutter from the frame) exceeding 1.5 sqm and not exc 4.00 sqm each , removing from the site Cutting holes exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and as directed. |
| 37 | Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and as directed. |
| 38 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid of size 45X90 MM made out of 5mm thick wood grain printed PVC sheet reinforced with MS Square tube fixing in opening as per specifications and drgs complete all as specified & directed. |
| 39 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid of size 65X125 MM made out of 5mm thick wood grain printed PVC sheet reinforced with MS Square tube fixing in opening as per specifications and drgs complete all as specified & directed. |
| 40 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid of size50X100 MM made out of 5mm thick wood grain printed PVC sheet reinforced with MS Square tube fixing in opening as per specifications and drgs complete all as specified & directed. |
| 41 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 42 | S &F for factory made solid panel PVC door shutter 30mm thick but wire gauge panel i.e panel should be wire gauge in lieu of PVC sheet panel .wire gauge shall be wraped on a additional squre tube 8 mm M.S. solid tube shall be welded to M.S tube and wire guage shall be strechtd tightly firmed ( style) consisting to frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Penelling of plain colour PVC sheet to be fitted in the MS. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and as directed. |
| 43 | S&F Stainless steel wire cloth 0.36 mm nominal dia and wire and average width of aperture 1.40 mm fixed with stainless steel staples complete all as specied and directed. |
| 44 | S&F 30 mm thick Flush shutters ,soild core construction ,with paticle board core and plywood face panels , commercial type both face is covered with decorative face veneer with lipping /frame to match and complete all as specified and directed. |
| 45 | M&L preparing new surfaces of wood & wood based material over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all asspecified and directed. |
| 46 | S&F Butt hinges medium weight cold rolled mild steel of 100 mm and fixed with screw complete all as specified & directed. |
| 47 | S&F Stainless steel butt hinges 100 mm and fixed with screw complete all as specified and directed |
| 48 | S&F Aluminium alloy, anodised, sliding door bolt, 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed. |
| 49 | S&F aluminium anodised barrel tower bolts of extruded section, length of bolt 200 mm and fixed with machine made screws complete all as specified & directed. |
| 50 | S&F extruded aluminium alloy handles 125 mm size, fabricated type anodised, fixed with machine made screws complete all as specified & directed. |
| 51 | S&F in repair mild steel 150 mm, single action spring hinges, mild steel with steel wire spring, stove enamelled, black complete all as specified and directed. |
| 52 | S & F door stopper of aluminium alloy body and tongue 150 mm long , anodised fixed in door with screws etc. |
| 53 | S&F 3mm thick, plain glass pin head type and glazing with oil putty,silicone or wooden beads, in square not exceeding 0.5 sqm in each pane including hacking out old broken glass of any thickness and any description from wooden/ steel frame/ stone,concrete or brick surrounds complete all as specified and directed. |
| 54 | S&F in repair galvanised wire cloth, 0.48 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised staples complete all as specified and directed |
| 55 | S & F Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.Area not exceeding 2.00 sqm each (Note: The unit rate quoted by contractor included cost of glass and includes all other connected accessories.) etc complete all as specified and direcetd. |
| 56 | M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors , windows , ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 57 | M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator (adequate track) without sash, aluminium section weighing 0.55 kg/m including joining cleats, glazing clips, rubber neoprene packing, necessary powder coated hardware ie. handles, barrel tower bolts, hinges etc, powder coated aluminum snap beading, screws etc. complete all as specified and directed Note : Panel filling ie. glass, fibre sheet, board, wire mesh etc. shall be measured and paid for separately. |
| 58 | S&F 3.50 mm thick tinted glass of selected quality in square not exceeding 0.5 sqm in each pane, fixed to aluminum frame with and including suitable rubber beading complete all as specified and directed |
| 59 | S&F 3.50 mm thick tinted glass of selected quality in square exceeding 0.5 sqm in each pane, fixed to aluminum frame with and including suitable rubber beading complete all as specified and directed |
| 60 | M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium door shutters of aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing, powder coated aluminium handles 150mm size 2 Nos, 3 Nos powder coated aluminium hinges heavy duty and 02 Nos 150mm long powder coated aluminium tower bolts in each door shutter with powder coated aluminum snap beading, screws etc. complete all as specified and directed Note : Panel filling ie. glass, fibre sheet, board etc. shall be measure and paid for separately. |
| 61 | S & F for door closer hydraulically regulated, designation No. 3, universal type, aluminium die-cast body (ISI Marked), suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed in repair complete all as specified and directed |
| 62 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (Including of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed. |
| 63 | S&F 25 mm bore SS Pipe curtain rods including SS brackets & SS decorative dome, suitable for door/widows curtain with fancy type SS decorative dooms with ss brackets fitted to each end and fixed to wall with wooden battens incl. removal of existing rod and making good complete all as specified and directed. |
| 64 | S&F in repair 18/19mm thick WPC board, prelaminated both face with decorative choice laminations one side and other side balancing white, fixed with screws to timber frame work including beading on cutting /exposed edges, polishing for cupboard shutter complete all as specified & directed. |
| 65 | S&F 100 mm long Hasp and Staple, safety type aluminium with MS hinge pin incl bolt to hinge plate and fixed with stainless steel screws complete all as specified and directed. |
| 66 | S&F continuous (piano) hinges, width of flaps (when open) 30mm stainless steel, bright finish or electrogalvanised complete all as specified and directed. |
| 67 | S&F 100 mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 68 | S&F for magnate catcher of metal body and striking plate heavy duty includind fixed with screw, complete all as specified and directed. |
| 69 | S&F Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 70 | S&F Mild steel TMT bars 6 to 8mm dia as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 71 | Demolation of brickwork or stone/boulder masonry, built in cement or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles complete all as specified and directed. |
| 72 | M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on surfaces of any description over 10cm width or girth on new steel surfaces including preparation of surfaces complete all as specified and directed |
| 73 | S&F in repairs sinks with drainage board made of stainless steel 0.80mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing with cantilever brackets and connecting union to pipe overall size 915mm x 460mm; bowl size 410mm x 330mm x 160 mm complete all as specified and directed. |
| 74 | S&F in stainless steel plate rack of Size 900mm x 600mm x 250mm made of 1mm thick stainless steel sheet complete all as specified and directed. |
| 75 | M&L 75mm thick PCC (1:3:6) Type C2 using 40mm graded stone agg as in plinth protection/Path etc surface even and smooth without using extra cement including oint sealing compound of grade A complete all as specified and as diected by engineer in charge. |
| 76 | M&L Brickwork with fly ash Modular bricks in cement mortar, straight or curved on plan exc 6m mean radius, built in built cement mortar 1:4 in complete all as specified and as directed |
| 77 | M&L for Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cills, seismic and other similar bands, plinth courses, copings, bed plates, bond stones, etc including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed. |
| 78 | M&L for brick work with sub class 'Fly ash brick, in cement mortar 1:4, straight or curved on plan to any radius in half brick thick wall complete all as specified & directed. |
| 79 | Taking up or down steel tubing and connetion including cleaning for refixing or removing to store of 15mm bore of pipe. |
| 80 | Taking up or down steel tubing and connetion including cleaning for refixing or removing to store of 20mm bore of pipe. |
| 81 | supply and laying 20 mm dia .of bore CPVC pipe SDR11 and Plain CPVC SDR11 fittings (ISI ) marked ,concealed or fixed to wall ,ceiling or laid in floors complete all as specified and as directed by engineer in charge . |
| 82 | supply and laying 25 mm dia .of bore CPVC pipe SDR11 and Plain CPVC SDR11 fittings (ISI ) marked ,concealed or fixed to wall ,ceiling or laid in floors complete all as specified and as directed by engineer in charge . |
| 83 | S&F in repairs 110mm dia PVC(SWR) type B pipes single socketed, in any length with rubber ring joints,fixed to walls complete all as specified and as directed by engineer in charge . |
| 84 | S&F 75 in repairs mm dia PVC(SWR) type B pipes single socketed, in any length with rubber ring joints,fixed in Wall/laid in floor complete all as specified and as directed by engineer in charge . |
| 85 | S&F 110mm dia PVC(SWR)pipes bends any radious with acces door complete omplete all as specified and as directed by engineer in charge . |
| 86 | S&F 75 mm dia PVC(SWR)pipes bends any radious.with acces door complete all as specified and as directed by engineer in charge . |
| 87 | S&F 110mm dia PVC(SWR)pipes junction,single (single T/Y ) equal or unequal any radious.with acces door complete all as specified and as directed by engineer in charge . |
| 88 | S&F 110mm dia PVC(SWR) vent cowl complete all as specified and as directed by engineer in charge . |
| 89 | M & L 75 mm dia of out let PVC (SWR) floor trap plain with cp grating incl. jointing with solvent cement as in repair complete all as specified and as directed by engineer in charge . |
| 90 | M & L PVC (SWR) gully trap 125 /100 plain with grating incl. jointing with solvent cement as in repair complete all as specified and as directed by engineer in charge . |
| 91 | S&F for in repair PVC valveless syphonic action type flushing cistern low level white with inlet ball valve,float end handle handle including bracket complete of capacity 10 litres, complete all as specified and directed. |
| 92 | S&F for in repairs 15mm angle cock chromium plated,cast copper alloy, with brass ceramic disc spindle and capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe fixed and complete all as specified . Neptune series of Prayag or similar in PARRYWARE/CERA /JAQUAR/HINDWARE |
| 93 | S&F for in repairs for 15 mm Stop valve cast copper alloy screwed down high pressure with CAPSTON HEAD handle chromium plated with long shank and cup (concealed type) screwed both ends for iron pipe 15mm bore or for unions complete all as specified and directed. MAKE : Neptune series of Prayag or similar in PARRYWARE/CERA /JAQUAR/HINDWARE |
| 94 | S&F for in repair 15mm ,bib tap Fancy type long body chromium plated,cast copper alloy, with brass ceramic disc spindle and capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe fixed and complete all as specified Neptune series of Prayag or similar in PARRYWARE/CERA /JAQUAR/HINDWARE |
| 95 | S&F in repairs for wall mixer with Two in one pattern in of brass CP, complete all as specified and directed. .MAKE : Neptune series of Prayag or similar in PARRYWARE/CERA /JAQUAR/HINDWARE. |
| 96 | S&F Sink Mixer With Swinging Spout on Upper Side (Wall Mounted Model) With Connecting Legs & Wall Flanges ..MAKE : Neptune series of Prayag or similar in PARRYWARE/CERA /JAQUAR/HINDWARE |
| 97 | S&F for in repairs15mm,pillar taps Fancy type long body chromium plated,cast copper alloy, with brass ceramic disc spindle and capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe complete all as specified . Make :Neptune series of Prayag or similar in PARRYWARE/CERA /JAQUAR/HINDWARE |
| 98 | S&F for shower rose brass chromium plated without swivel joints, 100 mm in size including fixing to steel pipe complete all as specified and directed fixed in repairs, complete all as specified and directed. |
| 99 | S&F for in repairs Brass CP WHB mixer for mixing hot & cold water screwed down for 15mm bore iron pipe complete all as specified..MAKE : Neptune series of Prayag or similar in PARRYWARE/CERA /JAQUAR/HINDWARE |
| 100 | S&F for in repairs vitreous china urinals, Half stall type ,white with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and directed. |
| 101 | S&F for as in repair viterous china wash down water closet pan (pedestal pattern) white excluding fixing bolts,flushing cistern and flush pipe including connection to drain and to flushing pipe syphonage pipe etc and mild steel chromium plated or aluminised hinges device & on CP Jet complete all as specified and directed. |
| 102 | S&F in reapir plastic water closet seat covered white coloured closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging devise complete all as specified and directed. |
| 103 | S&F for in repairs of vitreous china wash basin, white, oval type, size 550 x 400mm Including waste coupling ,waste pipe and labour for fixing pillar tap ,pvc connection but including cutting for and pinning in ends of and including brackets complete all as specified and directed. . Note : Pillar tap and PVC connection will be measured paid separetly. |
| 104 | M&L vitreous china squatting pan, orissa pattern sise 580x440mm white with integral foot rest (excluding flushing cistern) including vitreous china ‘P’ or ‘S’ traps connection to trap and to flushing pipe to complete fixed in repairs and making good to floor complete. |
| 105 | S&F for in repairs of vitreous china wash basin, white, size 550 x 400mm Including 32 mm waste coupling ,waste pipe and labour for fixing pillar tap ,pvc connection but including cutting for and pinning in ends of and including brackets complete all as specified and directed. . Note : Pillar tap and PVC connection will be measured paid separetly. |
| 106 | Supply only 15mm dia PVC connection with PTMT nuts of length 600 mm. |
| 107 | S&F for in repairs Looking mirror 5 mm to 6 mm thick with fixing brackets ,screws, pvc rawal plugs etc. complete all as specified and directed |
| 108 | S&f corner glass shelf 300mm ( with ABS Bracket ) complete all as specified and directed. |
| 109 | S&F in repair Soap dish of CP fixed with pvc rawl plugs and screw complete. |
| 110 | S&F in repair CP tubular towel rail D type 20mm dia and 60cm long complete all as specified and directed. |
| 111 | S & F Peg set of six S.S. fixed to wall with PVC plugs and screw complete. |
| 112 | S&F for in repairs mild steel Chromium plated grating 100 mm dia, fixed in repair, complete all as specified and directed. |
| 113 | S & F in repair Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, triplr layer in construction white in colour hoisted and fixed in position complete all as specified and directed. |
| 114 | S & F in repair Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 500 litres capacity, triplr layer in construction white in colour hoisted and fixed in positioncomplete all as specified and directed. |
| 115 | S & F 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 m m - 210 gms / 25mm-455gms/ 40mm - 690 gms) |
| 116 | S & F in repair gun metal globe / gate value with iron wheel head screwed both ends for iron pipe of 20mm bore all as specified. |
| 117 | S&F for as in repair 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed 20mm dia of pipe . (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed. |
| 118 | M and L for repairing of RCC projection, chajja, facia, column etc by necessary preparation (i.e. scraping, cutting, chiseling, dusting and cleaning exposed reinforcement surface of damaged/ loose surface and applying one coat of cement slurry and filling the surface with plain cement concrete (1:1.5:3) reinforced with welded mesh and make good by15mm thick plaster with cm (1:4) and ( Chemical coating used) including scaffolding/formwork etc upto double storey height complete all as specified and directed by engineer in charge. |
| 119 | S&F in repairs 40 mm dia .of bore UPVC pipe Plain UPVC fittings (ISI ) marked ,concealed or fixed to wall ,ceiling or laid in floors complete all as specified and as directed by engineer in charge . |
| 120 | S&F band, straps,supports or stay for rainwater,ventilating pipes, including bolts if required hookes (stay) heavy for large gates hook and pintle hinges large hasps and staples, chains hand made sliding bolts clamps hold fasts wall ties hooks for hanging fans plain angle cleats for securing purlin to wood trusses or rafters knee piece inserts two way and three way straps plate wahers and similar small articles confirming to Fe 290 Gde 165 complete all as specified and directed. |
| 121 | Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth for sewage line, manhole etc not exceeding 10 sqm on plan and getting out in hard /dense of soil complete all as specified and as directed. |
| 122 | Demolition and breaking drain pipe (salt glazed stoneware) of 150mm dia set in cement mortar including packing under and haunching against side of pipe complete all as specified and as directed. |
| 123 | M & L cement concrete bed to drain pipe 200mm dia including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate complete all as specified and as directed. |
| 124 | S&F for reinforced concrete pipes 200 mm bore class NP-2 laid and jointed with collar in CM 1:1 complete all as directed by Engr-in-Charge |
| 125 | M&L PCC 1:3:6 type C1 (20mm graded stone aggregate) as in surface channels and drains etc including use and waste of form work where necessary complete all as specified and as directed.complete all as specified and directed |
| 126 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using forms, moulds, mitred/stopped ends etc. |
| 127 | Returning, filling in, including spreading, watering and well ramming in layers n. exc 25 cm thick in any type of soil complete all as specified and as directed. |
| 128 | Removing excavated material to a distance n exc 50M and deposited where directed at a level n. exc 1.5M above the starting point complete all as specified and as directed. |
| 129 | Material and labour for providing and laying 80mm thick factory made ISI MARK chamfered edge cement concrete paver block of M-35 grade with aproved colour, design & attern as in foothpath, parks, lawns, drive ways or light traffic arking etc. of required strenght, thickness & size / shape, made by table vibrating method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding / laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra cement complete all as specified and directed. |
| 130 | Material and labour for providing and laying 60 mm thick factory made ISI MARK chamfered edge cement concrete paver block of M-35 grade with aproved colour, design & attern as in foothpath, parks, lawns, drive ways or light traffic arking etc. of required strenght, thickness & size / shape, made by table vibrating method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding / laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra cement complete all as specified and directed. |
| 131 | M&L for cement concrete ( 1:2:4) type B-0 (12.5 mm graded agrregate) in lintels upto 1.5m clear span, cills, stes, seimic and other similar bands, plinth course, string course, lacing cours, arapets and railings upto 60cm in height, coping, kneelers, apex stones, bed plates, kerbs, water througs and the like including wheathering slightly rounded or chamfered angle and throating complete all as specified and directed. |
| 132 | M & L PCC (1:2:4) Type B1 40 mm thick using 20 mm graded stone aggregate as floor surfaces concrete complete all as specified and directed. |
| 133 | M&L for PCC Type D2 (1:4:8) using 40mm graded stone agg as in foundation filling mass concrete, complete all as specified and directed. |
| 134 | M&L for vitrified paver color tiles 40 cmx40cmx9 to 10 mm thick, moulded set jointed and pointed in neat cement slurry with grey cement and pigment, in floors, over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed. |
| 135 | Dismantling of AC (corrugated / semi-corrugated) sheets in roof covering including any type of ridges complete all as specified and as directed. |
| 136 | S&F Pre painted galvalum sheet 0.50 mm thick having aluminum zinc coating 150 gsm/ sqm steel sheet any colour having tensile strength of 550 Mpa as in Roof covering /cladding to wall fixed with self tapping screws complete all as directed |
| 137 | S&F rolled section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates confirming to Fe-290 ( Gde E-165) complete all as specified and directed |
| 138 | Dismantling of wrought iron or mild steel work of any description not other wise provided for complete all as specified and as directed. |
| 139 | S&F 5mm thick hollow wall panelling plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining,Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of solvent cement and fixing at site including disconnecting and refixing of electric light board complete all as specified and as directed. |
| 140 | Taking down existing tarfelt and plaster from roof and removing from site all as directed. |
| 141 | M&L for 10 mm thick rendering in CM (1:4) over roof ,surface finished even and Smooth mixed with water proofing compond complete all as speceified and as directed by engineer- in charge . Note : Water proofing compound shall be measured and paid separately under appropriate item of BOQ as \\"supply only \\" |
| 142 | M &L For applying water proofing treatment with the following coats :- (a) First coat of bitumen primer conforming to IS -3384 @ 0.3 Kg/sqm (b) Second Layer of APP based polymectric membrane minimum weighing 3kg /sqm and minimum 3 mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms /sqm ) land on primed surface by torch application complete all as specified and as directed. |
| 143 | M&L one coat of aluminium bituminous paint over polymetric membrane complete all as specified and as directed. |
| 144 | Dismantling of wall and ceiling boards fibre pulp insulation etc or insulation boards/slabs/blankets any thickness including cover fillets, complete all as specified and directed. |
| 145 | S&F False ceiling 4 mm thick HPSC pre-prime non asbestos fibre cement building board ( size 600mm x 600 mm/ 595 mm x595 mm ) decorative finish fixed with clips and screw including powder coated galvanised MS grid frame work false ceiling of ( Main Tee size 32mmx20mmx0.45mm cross tee 24mmx24mmx0.30mm and wall angle19x19x0.30 mm ) and with slot for fixing including suspended with1.25 mm dia. GI wire hangers fixed with steel dash through fasteners from purline of the roof complete all as specified and as directed. |
| 146 | S&F Stone slab size 1200X600X50mm on manhole,drain etc complete all as specified and as directed by EIC. |
