Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge. |
| 2 | Material and labour for Glazed coloured ceramic tiles 1200 mm x 1800 mm x 10-12 mm thick, in vertical surface, set and jointed in chemical as per requirement/specifications and pointed in white or coloured cement to match the shade of tile, laid over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge. |
| 3 | Material and labour for Vitrified Ceramic tiles, light shade, 1200 mm x 1800 mm x 10-12 mm (square/ rectangular) as in floors etc., set and jointed in chemical as per requirement/specifications and pointed in white or coloured cement to match the shade of tile, laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge. |
| 4 | All as per Srl item No. 3.00 here-in-before but on vertical surface such as skirting, dado etc., with chemical as per requirement/specifications and including 10 mm thick rendering in cement mortar 1:3 complete all as specified and as directed by Engineer-in-Charge. |
| 5 | Material and labour for coloured vitrified ceramic tiles, 8-10 mm thick, double charge/ ultra charge (square/ rectangular), area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge. |
| 6 | All as per Srl item No. 5.00 here-in-before but on vertical surface such as skirting, dado etc., with chemical as per requirement/specifications and including 10 mm thick rendering in cement mortar 1:3 complete all as specified and as directed by Engineer-in-Charge. |
| 7 | Material and labour for first quality non skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular), area or each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge. |
| 8 | Demolition of cement concrete (unreinforced) of any description and in any position, and removing all demolished material/ debris to out side MD land complete all as specified and as directed by Engineer-in-Charge. |
| 9 | M&L for 100 mm thick Plain Cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregates) as in sub base etc., complete all as specified and as directed by Engineer-in-Charge. |
| 10 | M&L for 25 mm thick Cement Conrete 1:2:4, type B–0 (using 12.5 mm graded stone aggregates) as in floor finishes including finishing the surface even and rough to receive topping layer complete all as specified and as directed by Engineer-in-Charge. |
| 11 | S&F exterior grade, coloured, non skid porcelain tiles (Parking tiles), heavy duty, non-abrasive, acid/alkali resistant industrial tiles of size 400 mm x 400 mm x 12-15 mm as in floor, set and jointed in neat slurry and pointed in coloured cement to match the colour of tile, laid over and including screed bed or bedding layer of 15 mm thick in cement mortar 1:4, complete all as specified and as directed by Engineer-in-charge. |
| 12 | Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof), complete all as specified and as directed by Engineer-in-Charge. |
| 13 | M&L for Plain cement concrete 1:2:4, type B-1 (using 20 mm gaded stone aggegate) in roof kerbs, roof padding or mud stops, rounded or chamfered on edges, 50 mm average thickness complete all as specified and as directed by Engineer-in-Charge. |
| 14 | Material and labour for 20 mm thick rendering in cement mortar 1:4 over roof slab, finished even and fair, including mixing with water proofing compound complete all as specified and as directed by Engineer-in-Charge.(NOTE : WPC will be measrued and paid for separately) |
| 15 | Supply only liquid water proofing compound complete all as specified and as directed by Engineer-in-Charge. |
| 16 | M&L for 3 mm thick Atactic polypropylene polymer (APP) based polymeric membrane minimum weighing 3.6 kg/sqm and reinforced with polyester non woven fabric (weight not less than 150 gm/sqm) laid over and including 1.5 Kg/sqm bitumen grade 85/ 25 over and including compatible bitumen primer at the rate of 0.40 kg/sqm. The membrane shall be laid using butane torch and sealing all joints etc having 75 mm side lap joint and 100 mm end lap joint including inserting of APP membrane into parapet wall by making groove in wall and making good the surface complete including applying a coat of cold emulsion bituminous primer and one coat of aluminium paint on top of membrance all as per manufacturer's instructions including preparing the surface complete all as specified and as directed. |
| 17 | Providing and fixing 10 mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surfaces over 2nd class soft wood fillets or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh shall be paid separately) including dismantling of existing ceiling complete all as specified and as directed by Engineer-in-Charge. |
| 18 | M&L for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2 metre length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.50 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed by Engineer-in-Charge. |
| 19 | Material and labour for Textured painting as per approved design and pattern/ texture on one wall of each room including putty and primer as per specification complete. |
| 20 | Material and labour for 16 to 18 mm thick granite stone slabs, width and length as per site requirement, best quality, machine cut and polished to be fixed in floors, cooking plateform, tread, risers of steps and vertical surfaces etc., and jointed with grey cement slurry and pointed in white cement mixed with marble dust (1:2) with admixture of pigment to match the shade of slab, rubbing, cutting/ rounding of outer edges and corners where directed with and including 20 mm thick screed bed in cement mortar 1:4 including dismantling of existing damaged stone slab complete all as specified and directed. |
| 21 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50 metre height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc., Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwares and drainage of water etc., after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. |
| 22 | Note: 1. Area of net opening of window shall be measured for payment purpose.2. For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e., in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.3. Glass or wiremesh shall be paid separately. |
| 23 | Supply and fixing factory made uPVC white colour Two track, four panels, sliding glazed door made of (big series) frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension (Area of door above 8.00 sqm upto 10.00 sqm) comprising of uPVC multi-chambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), GI fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc., Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc., After fixing frame, the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. |
| 24 | Note: 1. Area of net opening of window shall be measured for payment purpose.2. For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e., in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.3. Glass or wiremesh shall be paid separately. |
| 25 | S&F 8mm to 10mm thick toughened glass of selected quality, size in square/ rectangle exceeding 0.5 Sqm in each panes fixed to uPVC windows and glazing with uPVC beading and rubber gasket for uPVC doors and windows complete all as specified and as directed by Engineer-in-Charge. |
| 26 | S&F 8mm to 10mm thick figured glass, pin head type, size in square/ rectangle not exceeding 0.5 Sqm in each panes fixed to uPVC windows and glazing with uPVC beading and rubber gasket for uPVC Doors and windows complete all as specified and as directed by Engineer-in-Charge. |
| 27 | Material and Labour for Toughened Glass door, 10 mm thick with all fittings i.e. stainless steel handle, mortice lock etc. including floor spring closing system complete all as specified and as directed by Engineer-in-Charge. |
| 28 | S&F in repair hollow PVC wall lining with necessary screws and drilling, PVC panel 0.5 mm thick each flap and both flap connected with ribs and overall thickness not less than 5 mm design printed in 300mm to 500 mm wide panels complete all as specified and as directed by Engineer-in-Charge. |
| 29 | S&F Pre-painted galvalume aluminium zinc (AZ-70) coating GI based corrugated steel sheeting, 0.50 mm thick, any colour, having tensile strength 550 Mpa as in roof coverings/ cladding to wall fixed with self tapping screws etc., including dismantling of old AC sheet of any description complete all as specified and as directed by Engineer-in-Charge. |
| 30 | Material and labour for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, finished even and smooth without using extra cement including taking down existing plaster of any description on brick wall/ concrete surface/ parapet wall including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed by Engineer-in-Charge. |
| 31 | Material and labour for Rendering 10 mm thick on brick work or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement including taking down existing plaster of any description on brick wall/ concrete surface/ parapet wall including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed by Engineer-in-Charge. |
| 32 | M&L for Rendering 5 mm thick in cement mortar 1:3 on ceiling surfaces of any description finished even and smooth without using extra cement including taking down existing plaster of any description on brick wall/ concrete surface/ parapet wall including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed by Engineer-in-Charge. |
| 33 | M&L for Preparation of new wall surfaces and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 lire/10 sqm over and including priming coat of exterior primer applied @0.90 litre/10 sqm over new surfaces complete all as specified and as directed by Engineer-in-Charge. |
| 34 | Material and labour for preparation of newly plastered surfaces of walls including providing and applying plaster of paris putty of 2 mm thickness in two layers over plastered surface to prepare the surface even and smooth complete all as specified and as directed by Engineer-in-Charge. |
| 35 | Material and labour for two coats of plastic emulsion paint, 1st quality having VOC content less than 50 gm/litre, of approved manufacturer, of required shade and colour on newly puttied surface including one coat of primer complete as per manufacturer's specification complete all as specified and as directed by Engineer-in-Charge. |
| 36 | Material and labour for preparation of old decorated surfaces of walls and applying two coats of plastic emulsion paint, 1st quality, having VOC content less than 50 gm/litre, of approved manufacturer, of required shade and colour over one coat of primer including wall care putty 2mm thick in two layers as per manufacturer's specification complete all as specified and as directed by Engineer-in-Charge. |
| 37 | Material and labour for complete removal of existing treatment from wall surfaces and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint @1.43 lire/10 sqm of required shade (company depot tinted) with silicon additives over and including priming coat of exterior primer applied @0.90 litre/10 sqm complete all as specified and as directed by Engineer-in-Charge. |
| 38 | M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed by Engineer-in-Charge. |
| 39 | S&F of Rimless back to wall Water Closet of size 360 mm x 560 mm x 420 mm with basin inner dimension 260 mm x 335 mm and weight 30 Kg with internal dimension of inlet hole dia 58 + 3 mm & external diameter of outlet hole dia 100 + 5 mm with UF soft close slim seat cover, hinges, fixing accessories and single piece slim concealed cistern with floor mounting frame, installation kit & \\"P type\\" drain pipe, connection set for wall hung WC (without flush control plate) having working pressure 0.3-10 bar, ABS made chrome plated flush control plates and having adjustable height of 0-200 mm, strong 80 mm thick high density polyethylene (HDPE) single piece body including dismantling of old Water closet, any type complete all as specified and as directed by Engineer-in-Charge. |
| 40 | S&F Ero fit Pneumatic in-wall tank with half frame complete all as specified and as directed by Engineer-in-Charge. |
| 41 | S&F Pheumatic flush plate in white with actuation button in brushed bronze complete all as specified and as directed by Engineer-in-Charge. |
| 42 | S&F liquid soap container of CP fixed with and including chromium plated brass screws and wooden/ plastic cleats. (Minimum weight 105 gms) complete all as specified and as directed by Engineer-in-Charge. |
| 43 | Supply and fixing in repair health faucet (ABS Body), mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed by Engineer-in-Charge. |
| 44 | Supply and fixing automatic hand dryer for bathroom, stainless steel body, super high speed for fast drying, energy efficient complete all as specified and as directed by Engineer-in-Charge. |
| 45 | Supply and fixing napkin hanger for bathroom, silver/ chrome finish, corrosion resistant premium metal construction for durability modern design complete all as specified and as directed by Engineer-in-Charge. |
| 46 | S&F in repair towel ring, brass, chromium plated, fixed with and including chromium plated brass screws and wooden/ plastic cleats (Minimum weight 90 gms) complete all as specified and as directed by Engineer-in-Charge. |
| 47 | S&F stainless steel towel shelf, 600 mm long with lower hanger having Nickle plating minimum 10.0 micron and Chromium plating minimum 0.3 micron complete all as specified and as directed by Engineer-in-Charge. |
| 48 | S&F of corner glass shelf (with bracket) having radius of min 225 mm and glass thickness of minimum 6 mm Nickle plating minimum 10.0 micron and Chromium plating minimum 0.3 micron complete all as specified and as directed by Engineer-in-Charge. |
| 49 | S&F glass shelf 600 mm long having glass thickness min 6 mm, nickle plating minimum 10.0 micron and Chromium plating minimum 0.3 micron complete all as specified and as directed by Engineer-in-Charge. |
| 50 | S&F in repair Vanity light mirrors, 762 mm x 1016 mm column, lighted mirror complete all as specified and as directed by Engineer-in-Charge. |
| 51 | S&F in repair PVC connection, 15 mm size with CP nuts of length 450 mm complete all as specified and as directed by Engineer-in-Charge. |
| 52 | S&F in repair PVC SWR floor trap, 75 mm size, plain grating including jointing with solvent cement complete all as specified and as directed by Engineer-in-Charge. |
| 53 | S&F table top wash hand basin and single lever Basin Mixer with popup waste & 575 mm rectangular vessel basin without faucet hole in white colour complete all as specified and as directed by Engineer-in-Charge. |
| 54 | S&F 600 mm vanity in walnut finish complete all as specified and directed. |
| 55 | S&F in repair basin mixer tap, brass, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe suitable for 15 mm bore pipe and fixed complete all as specified and as directed by Engineer-in-Charge. |
| 56 | Supply and fixing in repair stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union, suitable for 15 mm bore pipe, complete all as specified and as directed by Engineer-in-Charge. |
| 57 | Supply and fixing in repair stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union, suitable for 20 mm bore pipe, complete all as specified and as directed by Engineer-in-Charge. |
| 58 | S&F in repair angle valve with wall flange having water flow of 42.44 LPM @3 Bar having water tightness of min 16 Bar and pressure resistance of min 25 bar, Nickle plating minimum 10.0 micron and Chromium plating minimum 0.3 micron complete all as specified and as directed by Engineer-in-Charge. |
| 59 | Supply and fixing in repair bib taps, Brass, chromium plated, fancy type, long body with wall flange, screwed down for iron pipe or for brass ferrule, suitable for 15 mm bore pipe, complete all as specified and as directed by Engineer-in-Charge. |
| 60 | S&F Steel tubes, galvanized, 15 mm bore, 'medium grade' including all fittings, fixed to walls/ ceilings or laid in floors including taking up or down GI steel tubing 15 mm with connections or fittings from wall, ceiling, floor etc., complete all as specified and as directed by Engineer-in-charge. |
| 61 | S&F Steel tubes, galvanized, 20 mm bore, 'medium grade' including all fittings, fixed to walls/ ceilings or laid in floors including taking up or down GI steel tubing 20 mm with connections or fittings from wall, ceiling, floor etc., complete all as specified and as directed by Engineer-in-charge. |
| 62 | S&F Steel tubes, galvanized, 25 mm bore, 'medium grade' including all fittings, fixed to walls/ ceilings or laid in floors including taking up or down GI steel tubing 25 mm with connections or fittings from wall, ceiling, floor etc., complete all as specified and as directed by Engineer-in-charge. |
| 63 | S&F 110 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by Engineer-in-charge. |
| 64 | S&F 75 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by Engineer-in-charge. |
| 65 | S&F PVC (SWR) bends, any radius, 110 mm bore complete all as specified and as directed by Engineer-in-Charge. |
| 66 | S&F PVC (SWR) bends, any radius, 75 mm bore complete all as specified and as directed by Engineer-in-Charge. |
| 67 | S&F PVC (SWR) junction, (Single T), equal or unequal, with access door, 110 mm bore complete all as specified and as directed by Engineer-in-Charge. |
| 68 | S&F PVC (SWR) junction, (Single T), equal or unequal, with access door, 75 mm bore complete all as specified and as directed by Engineer-in-Charge. |
| 69 | S&F PVC (SWR) vent cowl, 110 mm complete all as specified and as directed by Engineer-in-Charge. |
| 70 | S&F PVC (SWR) gully traps 125/ 110 mm dia setting and jointing with cement solvent complete all as specified and as directed by Engineer-in-charge. |
| 71 | S&F Rotational moulded PVC, Triple layered, water storage tanks of capacity 1000 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position all as specified in SSR Part I, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc. and including 20 mm size Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe including taking down existing water tank complete all as specified and as directed by Engineer-in-Charge. |
| 72 | M&L for Providing and injecting chemical emulsion for Post Constructional antitermite treatment along external wall where the apron is not provided along the external wall below concrete or masonry apron using chemical emulsion @2.25 litres per linear metre including drilling and plugging holes etc. in apron carried out by authorized company applicant of chemical and approval by GE complete all as specified and as directed by Engineer-in-Charge. |
| 73 | M&L for Providing and injecting chemical emulsion for Post Constructional anti-termite treatment of soil under existing floors using chemical emulsion @one litre per hole, 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors carried out by authorized company applicant of chemical and approval by GE complete all as specified and as directed by Engineer-in-Charge. |
| 74 | M&L for providing and fixing Awning retractable sun shade awning cover outdoor patio canopy sunsetter deck awnings with manual crank handle, dark green in colour complete all as specified and as directed by Engineer-in-Charge. |
| 75 | Supply and fixing Solid PVC board, 22-25 mm thick, interior grade, laminated on both faces as in cupboard shutters etc., the PVC board shall be wrap free, impact resistant, fire resistant and smell free including dismantling of existing board complete all as specified and as directed by Engineer-in-Charge. |
| 76 | Supply and fixing 20 mm thick HDHMR board of uniform density not less than 850 kg/m3, b oth faces of HDHMR board shall be pasted with approved laminates, fixed as in cupboard shelves including dismantling of existing board complete all as specified and as directed by Engineer-in-Charge. |
| 77 | Supply only soft auto closing hinges openable at 0 degree for cabinet shuttes all as specified and as directed by Engineer-in-Charge.Make : Hettich/ Ebco/ Primer |
| 78 | S&F PVC body magnetic catcher for kitchen cup boards, fixed with standard steel screws, complete all as specified and as directed by Engineer-in-Charge. |
| 79 | S&F Brass handles, 200 mm long, fancy type (ISI marked), complete all as specified and as directed by Engineer-in-Charge. |
| 80 | S&F cupboard knob, brass, 40 mm size, fixed with nut, screws and washer fixed in any position, complete all as specified and as directed by Engineer-in-Charge. |
| 81 | S&F 25 mm dia stainless steel curtain rod including fixing fancy type brackets, stops, rollers etc., including taking down existing curtain rod complete all as specified and as directed by Engineer-in-Charge. |
| 82 | S&F Ball bearing runners, 45 mm soft closing Telescopic Channel, 24 inch length, full extension, load capacity 50 Kgs, silver finish, smooth movement fixed in cupboard drawer complete all as specified and as directed by Engineer-in-Charge. |
| 83 | S&F sliding shower enclosures wall to wall with one fixed glass and one sliding door with 6 mm thick glass chrome finish including fitting etc., complete all as specified and as directed by Engineer-in-Charge. |
| 84 | S&F Corner entry shower enclosure to fit in L shaped walls with sliding door to both sides (4 Parts) having glass thickness 6mm, chrome finished fittings of overall dimensions height 1950mm, width: 1500mm x1500mm including fitting, all accessories complete all as specified and directed by Engineer-in-charge. |
| 85 | S&F of shinny finish shower panel of size 1600 x 230 mm including 2 movable ABS body massage jets, Head shower, Hand shower, cascade shower and having minimum water pressure 2 bar including fitting etc., complete all as specified and as directed by Engineer-in-Charge. |
| 86 | Taking down chowkhats or frames not exceeding 1.5 Sqm with shutters (without taking off shutters from the frame) and removal from site complete all as specified as directed by Engineer-in-Charge. |
| 87 | Taking down chowkhats or frame exceeding 1.5 Sqm but not exceeding 4.00 sqm with shutter (without taking off shutters from the frame) and removal from site complete all as specified as directed by Engineer-in-Charge. |
| 88 | Taking down aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc., complete all as specified and as directed by Engineer-in-Charge. |
| 89 | Material and labour for point wiring with approved colour coded multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm, 1100 volts grade, two run of single core cable for phase & neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm, 1100 volts grade for earth continuity conductor to common earth and connected to earth dolly drawn in and including new concealed PVC conduit terminated on and including new modular sunken box of suitable size with frame & toughned glass cover for mounting premium quality luxury type switches, socket and regulator fixed on surface flush with wall, comprising of One light/ bell/ buzzer point controlled by one switch or one fan point controlled by one switch & fan regulator complete all as specified and as directed by Engineer-in-charge. Note: 1. Unit rate quoted shall be inclusive of cutting chases in wall/ floor/ PCC and making good the disturbed surface to match with the original. Contractors are advised to quote their rates accordingly and nothing extra shall be payble on this account. |
| 90 | All as per Serial item No. 86.00 here-in-before but for one socket outlet 3/ 5 pin, 6 Amps on the same board. |
| 91 | All as per Serial item No. 86.00 here-in-before but for one light point controlled by two 2-way switches. |
| 92 | All as per Serial item No. 86.00 here-in-before but for one socket outlet 3/5 pin, 6 Amps on the independent board. |
| 93 | All as per Serial item 86.00 here-in-before but for one socket outlet 3/5 pin, 16 Amp on independent board, with 2.5 Sqmm (nominal area) FRLSH cable for neutral and phase & 2.5 Sqmm (nominal area) FRLSH cable as earth continuity conductor. |
| 94 | S&F Premium Quality luxury type modular switch, made up of glass, operated through touch, 6 Amp, single pole, one way, 2 Module, 240 V, AC, with 100w minimum load bearing capacity complete all as specified and as directed by Engineer-in-Charge. |
| 95 | S&F Premium Quality luxury type modular switch, made up of glass, operated through touch, 6 Amp, single pole, two way, 2 module, 240 V, AC, with 100w minimum load bearing capacity complete all as specified and as directed by Engineer-in-Charge. |
| 96 | S&F Premium Quality luxury type modular bell push, made up of glass, operated through touch, 6 Amp, single pole, one way, 2 Module, 240 V, AC, with 100w minimum load bearing capacity complete all as specified and as directed by Engineer-in-Charge. |
| 97 | S&F Premium Quality luxury type modular switch, made up of glass, operated through touch, 20 Amp, single pole, one way, 2 Module, 240 V, AC, with 200w minimum load bearing capacity complete all as specified and as directed by Engineer-in-Charge. |
| 98 | S&F Premium Quality luxury type modular socket outlet, 10 Amp, 3 module, 240 V, AC with USB for mobile charger of 5 volt DC/ 2A complete all as specified and as directed by Engineer-in-Charge. |
| 99 | S&F Premium Quality luxury type modular socket outlet, 16 Amp, 2 module, 6/16 Amp, heavy duty, 230 V, AC complete all as specified and as directed by Engineer-in-Charge. |
| 100 | S&F Premium Quality luxury type modular fan regulator, made up of Glass, operated through touch, electronic, operating voltage 160 Volts - 240 volts, 2 module complete all as specified and as directed by Engineer-in-Charge. |
| 101 | S&F Premium Quality luxury type Modular TV Socket outlet, 1 module, complete all as specified and as directed by Engineer-in-Charge. |
| 102 | S&F Premium Quality luxury type Modular Smart Passive Infra-red Detector Sensor complete all as specified and as directed by Engineer-in-Charge. |
| 103 | S&F Modular call bell, polyphonic music type, 2 module, AC, 230 Volt complete all as specified and as directed by Engineer-in-Charge. |
| 104 | S&F ceiling rose, three terminal, PVC/ polycarbonate, isolated body, ISI marked complete all as specified and as directed by Engineer-in-Charge. |
| 105 | S&F wall mounted reading lamp 3/4 watt in-builit LED with adjustable arm, white/ wood finish, modern portable for hanging light with lamp shade fitting complete all as specified and directed by Engineer-in-Charge. |
| 106 | S&F Recess/ Surface mounted LED, 15/18 watt, round shape 125 mm-150 mm x 55 mm (approx) cool day/ warm white light, aluminium die cast powder coated housing, minimum LED life 5000 hours with full opal diffuser suitable for perfect lighting complete including and making good of disturbed surface complete all as specified and as directed by Engineer-in-Charge. |
| 107 | S&F Recess/ Surface mounted LED edge lit tile, 1 feet x 1 feet, 15/ 18 watt, cool day/ warm white light, in extruded aluminium/ CRCA steel sheet powder coated housing with full opal diffuser suitable for perfect lighting complete including cutting hole of required size in POP/ false ceiling and making good of disturbed surface complete all as specified and as directed by Engineer-in-Charge. |
| 108 | S&F 20 W In-Built LED Light, warm white, soft glow, black linear, long tube wall stylish 33-inch long metal black wall light (83L x 2W x 13H centimeters) with a glossy finish with up & down doom, modern sleek design complete all as specified and directed. |
| 109 | S&F LED Luxurious indoor Black & golden Metal Wall Sconces/ wall Lights, up and down type, 2 x 3 watt, waterproof IP-65 rated, 3000 K warm white Indoor for Living Room/ Bedroom as per sample making necessary connection complete all as specified and as directed by Engineer-in-Charge. |
| 110 | S&F LED Luxurious outdoor Black Metal Wall Sconces/ wall Lights, up and down type, 2 x 3 watt waterproof IP-65 rated, 3000 K warm white Outdoor as per sample making necessary connection complete all as specified and directed by Engineer-in-Charge. |
| 111 | S&F 6 to 10 watt LED Linear light with external driver made up of PDC-Al having finish black/ Gold or white/ black CCT 3/4 K any modern workspace complete all as specified and as directed by Engineer-in-Charge. |
| 112 | S&F Decorative wall light, 7/ 12 watt LED, two lights clear/ opal glass/ crystals lamp indoor type, antique design as per sample, perfect ambience for living/ bedroom suitable for all type lamp complete all as specified and as directed by Engineer-in-Charge. |
| 113 | S&F Surface/ Recess Mounted Downlights, 5 watt, 360° Rotation Foldable LED Ceiling Spot Lights including connecting up with two core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge. |
| 114 | S&F Decorative adjustable vertical spot light used for vertical illumination for table/ statue, LED 6 watt made up of pressure dicast aluminium body, Black and gold finish complete all as specified and as directed by Engineer-in-Charge. |
| 115 | S&F flexible LED Strip/ rope, IP-65 water proof for profile and ceiling with adopter and connection complete all as specified and directed by Engineer-in-Charge. |
| 116 | Supply and installing single sided LED signage (picture/ sign/ letters/ name plate as per required) with 3/ 5 Watt LED, colour as per direction complete all as specified and as directed by Engineer-in-Charge. |
| 117 | S&F Pendant LED Light, 3 Nos of 7 watt, Frosted Glass with Rose gold finish, pendant complete all as specified and as directed by Engineer-in-Charge. |
| 118 | S&F Pendant LED Light, 3 Nos of 7 watt, black Powder coated aluminium conical pendant complete all as specified and as directed by Engineer-in-Charge. |
| 119 | S&F Smart LED Table Lamp with multiple CCT option having wattage 36 watt LED complete all as specified and as directed by Engineer-in-Charge. |
| 120 | S&F LED Mirror/ wall Lights fitting, 17 watt cool/ warm white of approx size near to 534 mm x 93 mm x 33 mm, 220 V, AC, decorative/ model ultorn type including fitting fixed on wall/ ceiling and connecting up complete with flexible cable white of suitable size and making necessary connection complete all as specified and as directed by Engineer-in-Charge. |
| 121 | S&F Cabinet Light with Motion sensor, made up of extruded allumium housing, power consumption 8 Watt & maximum size 650 mm complete all as specified and as directed by Engineer-in-Charge. |
| 122 | S&F Aluminium Corner Profile Light Channel of size 7 to 10 cm, Double LED Strip Light type at both corners with LED Strip & end caps suitable for interior, rooms as per sample complete all as specified and directed by Engineer-in-Charge. |
| 123 | S&F LED building security light fitting, 1 x 30 Watt, new generation energy saving and environment friendly long life LED street light having system efficacy 130 lumen/watt, potted driver, external surge protection 10 kv, made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening seperate driver compartment with IP65 protection incl mounting bracket of suitable size and connection complete all as specified and directed. |
| 124 | Taking down carefully old unserviceable ceiling fans/ wall fan/ exhaust fans complete including removing its blade and deposit to the MES Store yard complete all as specified and as directed by Engineer-in-Charge. |
| 125 | S&F Royal Premium Ceiling Fan, 1200-1300 mm, Antique, Copper Oak Aesthetic 1200 mm Ceiling Fan with 5-Blade, smart, remote controlled, premium wooden finish, superior airflow with (BLDC) brushless direct current motor and connection complete all as specified and as directed. |
| 126 | S&F Air Exhaust Fan, rust proof body classic type and dust protection shutters 150-200 mm sweep, strong air suction, voltage 230 V, 50 Hz, RPM 2100, including making necessary opening of suitable size on stone/ brick/ masonary wall/ glass window, finishing it properly and making good with matching colour with the surroundings and connecting up with cable of suitable size from ceiling rose to fan complete all as specified and as directed. |
| 127 | S&F Wall Mounted fan, decorative type, 400 mm sweep, colour as per site requirement, remote control type, 230 V AC Supply, 50 Hz, high performance, smooth oscillation, copper bound motor made of sturdy Engineering plastic and metal ribs guard complete all as specified and as directed by Engineer-in-Charge. |
| 128 | S&F ABS plastic/ SS body wall mounting hand dryer machine suitable for bathroom etc., with minimum wattage 1800 watt as per sample complete all as specified and as directed by Engineer-in-Charge. |
| 129 | S&F Automatic water pressure pump for hot and cold water circulation, compatible for domestic uses, Energy effcient compact design, single phase, power not less then 0.5 HP complete all as specified and as directed by Engineer-in-Charge. |
| 130 | S&F sheet metal enclosure, single pole and neutral (SPN) with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, 240 Volts for AC/ Geyser point complete all as specified and as directed by Engineer-in-Charge. |
| 131 | Disconnecting and taking down old unserviceable sub main wiring complete with concealed conduit/ batten of any type and size removing materials and making good disturbed surfaces of walls, floors etc., complete all as specified and as directed by Engineer-in-Charge. |
| 132 | M&L for Sub main wiring with with two runs of single core PVC insulated and unsheathed multistranded, copper conductor FRLSH cable of size 4.0 sqmm, LT, 1100V grade, drawn through and including concealed PVC non metallic conduit of 25 mm/ appropriate dia with accessories and fittings and one run of single core PVC insulated and unsheathed multistranded, copper conductor FRLSH cable of size 4.0 sqmm as earth continuity conductor complete all as specified and as directed by Engineer-in-Charge.Notes: (i) Cutting chases and making good shall be measured & paid for separately under relevant item of this schedule. (ii) Color code shall be Red for phase, black for neutral and green for earth.(iii) For payment purposes, total runs of main cable as mentioned above and one run of earth cable wire and conduit shall be considered together as \\"1 running meter\\" |
| 133 | M&L for Sub main wiring with with two runs of single core PVC insulated and unsheathed multistranded, copper conductor FRLSH cable of size 10.0 sqmm, LT, 1100V grade, drawn through and including concealed PVC non metallic conduit of 25 mm/ appropriate dia with accessories and fittings and one run of single core PVC insulated and unsheathed multistranded, copper conductor FRLSH cable of size 10.0 sqmm as earth continuity conductor complete all as specified and as directed by Engineer-in-Charge.Notes: (i) Cutting chases and making good shall be measured & paid for separately under relevant item of this schedule. (ii) Color code shall be Red for phase, black for neutral and green for earth.(iii) For payment purposes, total runs of main cable as mentioned above and one run of earth cable wire and conduit shall be considered together as \\"1 running meter\\" |
| 134 | M&L for Sub main wiring with with four runs of single core PVC insulated and unsheathed multistranded, copper conductor FRLSH cable of size 16.0 sqmm, LT, 1100V grade, drawn through and including concealed PVC non metallic conduit of 32 mm/ appropriate dia with accessories and fittings and one run of single core PVC insulated and unsheathed multistranded, copper conductor FRLSH cable of size 16.0 sqmm as earth continuity conductor complete all as specified and as directed by Engineer-in-Charge.Notes: (i) Cutting chases and making good shall be measured & paid for separately under relevant item of this schedule. (ii) Color code shall be Red for phase, black for neutral and green for earth.(iii) For payment purposes, total runs of main cable as mentioned above and one run of earth cable wire and conduit shall be considered together as \\"1 running meter\\" |
| 135 | M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing, concealed conduit wiring, etc., cutting not exceeding 10 cm in girth, complete all as specified and as directed by Engineer-in-Charge. |
| 136 | S&F Co-Axial Cable copper clad steel conductor, aluminium foil boned, PVC insulated, black colour complete and including PVC Concealed conduit minimum size 25 mm along with its accessories complete all as specified and as directed by Engineer-in-Charge. |
| 137 | M&L for disconnecting and taking down old unserviceable DBs/ junction box/ panels etc., of any type and size complete along with all MCCBs/ MCBs etc., complete all as specified and as directed. |
| 138 | S&F vertical TPN distribution board, double door, flush mounting with provision for MCCBs incomer upto 125 Amp, 415 volts & outgoing 4 way having IP-54 protection complete all as specified and directed by Engineer-in-charge. |
| 139 | Supply & fix Prewired Distribution Board, factory made, sheet metal enclosure, double door, 12 way (2 + 10 way) single pole and neutral link, class IP-43 IK 09 with 200 Amp rated copper bus bar, 240 Volts, complete all as specified and as directed by Engineer-in-Charge. |
| 140 | Supply & fix Prewired Distribution Board, factory made, sheet metal enclosure, double door, 8 way (2 + 6 way) single pole and neutral link, class IP-43 IK 09 with 200 Amp rated copper bus bar, 240 Volts, complete all as specified and as directed by Engineer-in-Charge. |
| 141 | Supply & fix Prewired Distribution Board, factory made, sheet metal enclosure, double door, 4 way (2 + 2 way) single pole and neutral link, class IP-43 IK 09 with 200 Amp rated copper bus bar, 240 Volts, complete all as specified and as directed by Engineer-in-Charge.Note for serial item No. 135 to 138:- MCCB and MCB shall be measured and paid for separately. |
| 142 | S&F MCCB, 4 pole, 3 phase, 415 volts of capacity 125 Amp, 16 KA with Ics = 100% Icu with adjustable thermal and magnetic release complete with proper copper thimble/ lux complete all as specified and as directed by Engineer-in-Charge. |
| 143 | S&F MCB, single pole and neutral (SP&N), 40 to 63 Amp, 240 volts, 10 KA, 'C' series with all incoming/ outgoing connections with proper size lugs, complete all as specified and as directed by Engineer-in-Charge. |
| 144 | S&F MCB, single pole (SP), 40 to 63 Amp, 240 Volts, 10 KA, 'C' series with all incoming/ outgoing connection with proper size lugs, complete all as specified and as directed by Engineer-in-Charge. |
| 145 | S&F MCB, single pole (SP), 6 to 32 Amp, 240 Volts, 10 KA, 'C' series with all incoming/ outgoing connection with proper size lugs, complete all as specified and as directed by Engineer-in-Charge. |
| 146 | Material & labour for earthing complete with galvanized steel earth plate electrode size 600 mm x 600 mm x 6.0 mm thick buried directly in ground vertically in a pit of depth not less than 2.25 metre below ground level with top edge of the earth plate not less than 1.5 metre below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanized earth lead 4.0 mm dia by means of bolts, nuts, check nuts and washers including GI protection pipe, light grade, 15 mm bore connected to main earth wire switch and GI pipe, medium grade, 20 mm bore for watering, funnel with wire mesh, CI cover with frame, PCC chamber pit with PCC 1:2:4 type, B-1 (using 20 mm graded stone aggregate) complete with necessary excavation and earth work all as shown in electrical plate No. 3 of SSR part I : 2009 connected to earthing test point as indicated including testing on completion all as specified and as directed by Engineer-in-Charge. |
| 147 | Note: The unit rate including for protection pipe and GI earth wire 4.00 mm dia from top to earth plate upto 7.5 metres. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
