|
| 1 | Sub-Head : Wood and P.V.C. Work |
| 2 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. |
| 3 | a) Kail wood |
| 4 | Providing & fixing panelling tongue and groove or other pattern on verticle /round /horizontol i/c ceiling,walls etc. of approved design/ pattern over wooden fram with nails/screws/adhesive as per the direction of Engineer-in-Charge. (The frame work not paid separately) |
| 5 | a) 12 mm thick Canadian Pine wood . |
| 6 | Providing and fixing 12 mm thick toughened glass in window of approved brand and manufacture, including necessary fitting etc. for fixing all complete as per direction of Engineer-in-charge |
| 7 | Providing and fixing 18 mm thick EDMR ( Extra density moisture Resistant ) grade Block Board with commercial veneering on both faces conforming to IS: 1659 of approved brand and manufacture, bonded with phenol formaldehyde synthetic resin in cup boards, shelves, shutters with necessary screws, nails and adhesive etc all complete as per the direction of Engineer-in-charge. |
| 8 | Providing and fixing stainless steel . handles of approved quality with necessary screws etc. all complete as per the direction of Engineer-in-charge. |
| 9 | a) 100 mm |
| 10 | Sub-Head : Steel Work |
| 11 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 12 | Sub-Head : Flooring |
| 13 | Providing & fixing high density prelaminated fibre board 8 mm thick AC-4 grade of Action Tesa or equivalent brand with 0.10mm thick polythene sheet as moisture barries and 3mm thick foam for hush factor as per approved colour, shade and design all complete as per the direction of Engineer-in-charge. |
| 14 | Sub-Head : Roofing |
| 15 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /seIf tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 16 | Sub-Head: FINISHING |
| 17 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 18 | Two or more coats on new work. |
| 19 | Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: |
| 20 | a) Two or more coats on new work. |
| 21 | French spirit polishing : |
| 22 | a) Two or more coats on new works including a coat of wood filler. |
| 23 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 24 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. |
| 25 | a) Two coats. |
| 26 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 27 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 28 | a) One or more coats on old work. |
| 29 | French spirit polishing : |
| 30 | a) One or more coats on old work. |
| 31 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 32 | a) Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). |
| 33 | Sub-Head : Repairs to Buildings |
| 34 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 Sqm meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-charge. |
| 35 | a) With cement mortar 1:4 (1cement: 4 coarse sand). Please Enable Macros to View BoQ information |
