|
| 1 | Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 2 | Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 3 | Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 4 | Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 5 | Providing designation 75B brick work in C.M. (1:6)in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm, thick mortar joints of screening materials, scaffolding, ranking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 6 | Taking down chaukhats in doors including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 7 | Taking sown chaukhats in windows including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 8 | Taking down old door and window shutters including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 9 | Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 10 | Providing and laying APP (Atactic Polypropylene Polymer) modifiedprefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of acoat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/litre and viscocity 70-160 cps. Over the primer coat the layer ofmembrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical andchemical parameters of the membrane shall be as under : Jointstrength in longitudinal and transverse direction at 23°C as 650/ 450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM,D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membraneExtra for covering top of membrane with Geotextile, 120 gsm nonwoven, 100% polyester of thickness 1 to 1.25 mm bonded to themembrane with intermittent touch by heating the membrane by ButaneTorch as per manufactures recommendation. |
| 11 | Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wallsurface to prepare the surface even and smooth complete |
| 12 | Proving two coat of oil bound distemper of approved shade and make over a primer coat of cement primer new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding, washing floors and taxes all complete as per building specification and direction of E/I. |
| 13 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied@ 2.20 kg/10 sqm) |
| 14 | Dismantling patent stone floor including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 15 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 16 | Providing 50mm thick 2nd class patent stone flooring (1:2:4) with 20mm, to 6mm size graded stone chips finished with flooring coat of neat cement in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royality with all complete as per building specification and direction of E/I. |
| 17 | Supplying, fitting and fixing good quality, well dressed and well seasoned sal wood work in chaukhat in doors, windows skylights, fanlights and C/W celetial windows openings, including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all completeas per building specification and direction of E/I. |
| 18 | Supplying, fitting and fixing 38mm , thick good quality well dressed and well seasoned sal wood battened shutters ledged and braced in doors and windows with oxidised iron fittings such as hinges, sliding door, bolts, tower bolts, handled or rings, hooks and eyes, cleats, sand blocks as per schedule, taxes and royalty all complete as per building specification and direction of E/I. |
| 19 | Providing primer one coat of approved shade and make over new wooden surface including preparingthe surface after cleaning, removing dirt, scales, smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. and Providing two coats of synthetic enamel paint of approved shade and make over new wooden surface including cleaning the surface after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 20 | Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 21 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. |
| 22 | Providing 250mm. Wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 250mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I. |
| 23 | Carriage |
| 24 | sand 9 km |
| 25 | Stone Chips 8 km |
| 26 | Stone Metal 8km |
| 27 | Bricksl 8km |
| 28 | Providing and fixing male ended 15mm dia brass bib cock of approved quality (wt.not less than 350gms)with extra socket all complete as per specification and direction of E/I. |
| 29 | Providing and fixing 15mm size pillar cock C.I.body brass spindle pillar cock of approved quality as per specification and direction of E/I. |
| 30 | Providing and fixing brass/C.I.stop cock of approved quality all complete job as per direction of E/I. 15mm dia |
| 31 | Providing and fixing G.M. non Return valve Horizontal/ vertical type of approved quality as per specification and direction of E/I. |
| 32 | Horizontal-25mm dia |
| 33 | Horizontal-32mm dia |
| 34 | Making holes in wall for laying G.I.pipe and restoring the same after pipe laying as per specification and directionof E/I. |
| 35 | 125mm thick wall |
| 36 | 250mm thick wall |
| 37 | Supplying, fitting and fixing vitreous white glazed earthen ware I.W.C. of parry Hindustan or any other I.S.S.approved make with 100mm H.C.I. ‘p’ trap 15 litres C.I. pull and let go flushing cistern of namesor other I.S.S.equivalent make, complete with all fittings,C.I. or C. C.brackets 32mm alkathene/P.V.C. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of vitreous white glazed earthenware ware footrest to be fixed in floor 15mm C.I. body brass spindle stope cock of weight not less than 50grms, 15mm P.V.C. connection pipe 450 mm. long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I. |
| 38 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete150 mm dia. R.C.C. pipe |
| 39 | Providing and fixing on wall face unplasticied Rigid PVC rain water pipes conforming to IS:13592 Type A , including jointing with seal ring conforming to IS:5382leaving 10mm gap for thermal expansion (i)single socketed pipes |
| 40 | 75mm dia meter |
| 41 | 110mm diameter |
| 42 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Single Tee without door 75x75x75mm |
| 43 | Single Tee without door 110x110x110mm |
| 44 | 75mm dia Bend |
| 45 | 110mm dia Bend |
| 46 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including allCPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. |
| 47 | 25mm nominal outer dia pipe |
| 48 | 32mm dia nominal outer dia pipe |
| 49 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.15mm dia nominal outer dia pipe |
| 50 | 20mm dia nominal outer dia pipe |
| 51 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank. |
| 52 | Point wiring in PVC conduit with piano type switch:- Wiring for light point/exhaust fan point/call bell point with 1.5Sq.mm FRPVC insulated copper conductor single core cable in surface/recessed PVC conduit with Piano type switch,Phenolic laminated sheet,suitable size PVC/G.I.box etc.as required.Group C |
| 53 | Twin control point wiring in PVC conduit with Modular type switch:- Wiring for twin control light point with 1.5Sq.mm FRPVC insulated copper conductor single core cable in surface/recessed PVC conduit, 2way Modular type switch,phenolic laminated sheet sheet,suitable size PVC/G.I.box etc.as required. |
| 54 | Circuit/submain wiring PVC conduit:- Wiring for circuit/submain withing along with earth wire with the following sizes in PVC insulated copper conductor single core cable in surface/ recessed PVC conduit as required.2x1.5Sq.mm+1x1.5Sq.mm earth wire |
| 55 | 2x2.5Sq.mm+1x2.5Sq.mm earth wire |
| 56 | S/F piano type switch/socket:- Supplying and fixing of following piano type switch/socket on the existing switch box/cover including connection etc.as required.5/6Amp one way switch |
| 57 | 3Pin 5/6Amp socket outlet |
| 58 | S/F Modular type electronic fan regulator :-Supplying and fixing stepped type electronic fan regulator on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 59 | S/F light plug point with piano type Accessories:- Supplying and fixing suitable size G.I./PVC box on surface or in recess with phenolic laminated sheet cover infront including providing and fixing 5Pin 5/6Amp socket outlet and 5/6Amp piano type switch connection, painiting etc.as required. |
| 60 | S/F power plug point with modular type accessories :-Supplying and fixing suitable GI box with modular plac and cover in front on surface of in recess, including providing and fxing 6 pin 15/16 amps modular socket outlet and l5/16 amps modular switch. connection, painting letc. as required (For light plugs to be used in non residential buildings) |
| 61 | Supplying and fixing 2pin ceiling rose on the existing junction box/wooden block including connection etc.as required. |
| 62 | Supplying and fixing batten/angle holder including connection etc.as required. |
| 63 | Installation Testing and commissioning of pre-wired fluorescent fittings/ compact fluroescent fitting all type complete with all accessoires and tubes etc.directly/wall including connection witgh 1.5Sq.mm FRPVC insulated copper conductor single core cable and earthing etc.as required. |
| 64 | Providing and fixing following capacity busbar chamber with 4strips of length 300mm made of copper suitable for following capacity complete with all accessories including connection edarthing the bodey etc. as required. 100Amp |
| 65 | Supplying and fixing 6Amp to 32Amp rating 240Vls 10KA,\\"B\\" Series miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections testing and commissioning etc.as required.6/32Amp single pole\\"B\\" Series |
| 66 | Earthing with copper earth plate 600x600x3mm thick including accessories and providing masonary enclosures with cover plate having locking arrangement and watering pipe etc.(with chaocoal or coke and salt)as required. |
| 67 | Supplying and laying 6SWG copper wire at 0.50M below ground level for conductor earth icnlduing sholdering etc.as required. |
| 68 | Providing and laying earth connection from earth electrode with 4mm dia copper Wire in l5mm dia G.I. pipe from earth electrode, as required. |
| 69 | Laying of one number PVC insulated and PVC sheathed.XLPE power cable of 1.1Kv grade of size exceeding 25Sq.mm but not exceeding 120Sq.mm direct in ground including excavation sand cushioning,protective covering and refilling the trenches etc.as required. |
| 70 | Providing and fixing of XLPE aluminum Armoured PVC cable conforming to IS 1554 (Part-iv) of grade 1.1KV make Havles/Finolex/Polycab. 3.5core 35Sq.mm |
| 71 | Supply of 9/10 watt LED blub |
| 72 | Supply of LED batten (20/22W) |
| 73 | S.I.T.C of floowing rating LED Street lighting luminarie with pressure die cast Housing and toughened glass cover (IP 66 protection) in existing pole/pipe for Supply voltage'100-270V AC,50Hz. Luninarie shall be confirm to IS: 10322 part/5Section-3 and shall be complete with all neccssary accessories as required45/48W LED Street light |
| 74 | Supply Installation, testing and commissioning of follwing size ceiling fan 3 Blades confirming to13:374,.2019 including wiring the down rods of Standard length (upto 30cm) with l.Ssq.mm. FR PVC insulated, copper wire Suitable for 230V 50H2, single phase supply etc. complete as required.1400mm (56\\") Ceiling Fan |
| 75 | Add 18 % GST (in Basic Rate must fill 12) |
| 76 | Add 1% Labour Cess (in Basic Rate must fill 1) Please Enable Macros to View BoQ information |
