|
| 1 | Dismanteling existing plaster including disposal of refuse as directed by Engineer in charge within a distance of 60 feet (sorCh 17-706) |
| 2 | 12 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) Sor 13.1.1 |
| 3 | Dismanteling of brick wrok in cement morta r including stacking of material as directed by engineer in charge with in adistance of 60 mtr (CH17 -692 Sor) |
| 4 | Scraping old white or colour wash including disposal of refuse as directed by Engineer -in-Charge within a distance of 60 meters (sor no 708) |
| 5 | Providing and applying white cement based putty of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(dsr news 2023-24) ch 15 |
| 6 | finishing walls with exterior emulsion panit(Apex) of approved brand and manufacter and of require shade on undarcoated wall surface to give even shade over @ 1.25ltr/10 sqm including one coat of primier applied @ 0.75 ltr/10 sqm coat curing and cost of all materials ,labour ,t&p etc. required for proper completion of work . (for two coat).Sor ch 15 si no 35 |
| 7 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture (Sor 19.29) CH 15 |
| 8 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Supply and fixing Salwood wrought framed and fixed including simple moulding straight work as in Chaukhat frame including supply of all materials, labour, T&P etc. required for proper completion of work. SOR (9.1.2) CH 9 |
| 9 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : SOR CH 15/ S.NO.(12.45.1) |
| 10 | 38 mm thick wood block flooring of first class teak wood laid over 25 mm thick leveling layer of cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 10 mm nominal size) to be paid separately, coated with a thin layer of hot bitumen penetration 80/25 (blown type) @ 2.45 kg per sqm, including fixing blocks in position after dipping in hot bitumen (blown type) up to half depth, planed, levelled smooth and finished complete. DSR 11.34 with factor |
| 11 | p/F in position wall panels of plain teak wood particle board 12 mm thick with bounded with BWP type PFSR Tile kali wood frame and provision for providing switch board flexure tec as per drawing compelete with polishing and fining with fremg wax polish as per direction by eng in charge Same as but with one side laminated insted of plain board(SOR CH 12 SL 9) |
| 12 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary all complete (Sor 9.21.1) |
| 13 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: Butt hinges and necessary screws shall be paid separately) Second class teak wood 35 mm thick shutters (DSR 9.5.1.1) with factor |
| 14 | Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). (3 Track Slider Window with Mesh) Sor 9.147D.4) |
| 15 | 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames.DSR 9.122.1 with factor |
| 16 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame(.DSR 9.121) |
| 17 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. Complet(DSR 9.76) with factor |
| 18 | Providing and fixing chromium plated brass handles with necessary screws etc. complete: DSR 9.92.1 with factor |
| 19 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces SOR 10.5.1 |
| 20 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) 250x10 mm(DSR 9.63.1) with factor |
| 21 | Repairing of all ceiling fans (As per Quotation) |
| 22 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti- termite treatment (excluding the cost of chemical emulsion) :Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration SOR 2.35.1 |
| 23 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: ( Dsr No-8.32) with Factor |
| 24 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal bore.DSR 18.50.1 with factor |
| 25 | p/f 18 mm thick granite mirror polished with approved shade laid over 20 mm thick base cement maortar 1:4 with all complete SOR 11.23 |
| 26 | Proving Visitor Geeken Chairs ( Market Rate- GST +10%C.P. & 5% loading unloading charges) |
| 27 | Providing chair for vc sir office ( Market Rate- GST +10%C.P. & 5% loading unloading charges) (Geeken) |
| 28 | Providing Sofa set ( Market Rate- GST +10%C.P. & 5% loading unloading charges)(Geeken three seater) |
| 29 | Providing centre table ( Market Rate- GST +10%C.P. & 5% loading unloading charges) (Geeken) |
| 30 | Structaral steel work riveted ,bolted or welded in builtup section with a priming coat all complete Sor 10.2) |
| 31 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete.Sor 11.38 |
| 32 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On concrete work DSR 13.52.2 with factor Please Enable Macros to View BoQ information |
