Tender For Integrated Development Work Of Jaibhim Nagar And Kas Ur Slums In Municipal Corporation Meerut Under State Smart City Scheme. (Road Construction, Park Construction, Community Centre, Community Toilet, Library And Street Lighting Work),, Meerut-Uttar Pradesh

TDR : 55091542

Tender Notice
BOQ

20 Days Left

Meerut , Uttar Pradesh

Tender Brief : Tender For Integrated Development Work Of Jaibhim Nagar And Kas Ur Slums In Municipal Corporation Meerut Under State Smart City Scheme. (Road Construction, Park Construction, Community Centre, Community Toilet, Library And Street Lighting Work),

Document Fees
₹ 5900 /-

EMD
₹ 2922800.0 /-

Tender Value
₹ 5.44 Crore /-

Submission Date
05-05-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Construction work of community building in slum area in Ward-09 Kasampur. Excavation in foundation in ordinery soil (loam,caly or sand) i/c lift upto 1.5 m and lead upto 30 m and i/c filling watering and ramming of excavated earth
2	Concrete with 4 cm. gauge Brick Ballast fine sand of 1.25 F.M. and cement in proportion of 12:6:1 in foundation and under floors, including supply of all materials, labour. T & P etc. Required for proper completion the work.
3	M-150 brick work in 1:4 one cement and four course sand . mortar in foundation and plinth including supply of all materials labour, T & P etc required for proper complition of the work
4	M-150 brick work in 1:4 one cement and four course sand . mortar in Superstructure including supply of all materials labour, T & P etc required for proper complition of the work
5	R.C.C. Work with cement, approved coarse sand & 4 cm gauge approved stone grit in proportions of 1:1.5:3 excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire. in Columnand T-Beam
6	R.C.C. Work with cement, approved coarse sand & 4 cm gauge approved stone grit in proportions of 1:1.5:3 excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire. in slabs
7	Providing and laying \\"brick coba\\" 12mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15mm to each other, over 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30cm x cm and side wall parapet shall be mono tythic plaster wall upto 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary Coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including S/o all material, labour, T&P etc complete for proper completion of work.
8	Mild steel or iron such as in plane reinforcement concrete.
9	Sand filling in plinth and under floor including supply of necessary quantity of sand from a distance not exceeding 8 Kms. from the site of work and including watering, dressing etc. labour and T&P etc. required for proper coinplition of the work. saplings ol gl(h upto 30 cms. measurcd at a he;ght oi1 [4. above grcund level and removal of flrbbish uplo adjstance of 50 i,4. olt slde the periphery of area ctearcd.includiflg cosl ofsand.
10	Cement Concrete with 2 cm gauge approved stone grit,coarse sand & cement in the proportion of 8:4:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.
11	2.5 cm (1\\") thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2 cm. (1\\") graded approved stone grit, laid in panels finished with 3 mm. (1/8\\") floating coat of neat cement of cement and marble dust in ratio 5:1 as specified over and including 8 cm (3\\") thick base concrete consisting of cement, fine sand of 1.25 fineness modulus and brick ballast 4 cm. (1½\\") gauge in the proportion of 1:4:8 and removing any overlapping mortar at the joints of the penals if any and giving them a uniform finish, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work
12	12 mm thick plaster with1:4 Cement and four course sand including supply all material and labour, T & P required for proper completion of work
13	Supply and fixing 6 to 8 mm thick ivory or light shades vitrefied tiles 600x600 mm size in flooring and skirting with 1:3 approved cement and coarse sand morter finished with in its cement colour slurry, jointing and polished of approved quality complete, including supply of all materials, labour, tools and plants etc. required for proper completion of the work. as per direction of Engineer - in- charge
14	Supply and fixing 6 mm thick china white glazes tiles in flooring or in skirting or dado laid with 1:3 approved cement and coarse sand mortar finished with white cement slurry, jointing and polished of approved quality complete, including supply of all materials, labour, tools and plants etc. required for proper completion of the work as per direction of engineer-in- charge.
15	Chequerred precast CC tiles 22 mm thick in foothpath and courtyard in neat cement slurry incl. rubbing and cleaning etc complete on 20 mm thick bed on 1:4 cement mortar medium shade pigment using 50% white cement 50% grey cement
16	Providing wall putty on new surface with approved qwality
17	Distempering (first coat) with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N, Shalimar, Asian Paint after thoroughly brushing the surface free from mortar dropping and other foreign matters and also including the surface even with plaster of Paris or approved synthetic materials and sand papered smooth including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.but for every coat after thefirst coat.
18	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) For fixed portion Powder coated aluminium (minimumthickness of powder coating 50 micron)
19	For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost ofEPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimumthickness of powder coating 50 micron)
20	Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side
21	Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in-chargePowder coated minimum thickness 50 micron aluminium
22	Aluminium Tower-bolt
23	Providing and fixing stainlees steel (Grade 304) railing made of hollow tube, channels, plates, etc., including welding, grinding, buffing , Polisihing and making curvture (whereever required ) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with neccesary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of thr floor side of the waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fastners etc.) S.I.NO-10.28/ D.S.R-2023
24	providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side/top/centre hung, with beading and all members such as F7D, F4B, K11 and K12 B etc. complete of stanard rolled steel sections, joints including providing and fixing of hings, pivot, priming coat of complete all as per approved design, (sectional weight of only steel mebers shall be measured for payment). Fixing with 15X3 mm lugs 10 cm long embedded in cement conc. block 15X10X10 cm of C.C 1:3:6.
25	Providing and placing on terrace polythene water tank isi marked
26	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. a) 15 mm dia. nominal outer dia Pipes
27	b) 20 mm dia. nominal outer dia Pipes
28	PVC pipe of 110 mm for drainage system
29	Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C. pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required.
30	Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 30x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern
31	Providing and fixing C.P. brass bib cock of approved quality confirming to IS:8931 15 mm nominal bore
32	White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps
33	S/F 15 mm C.P. Brass angle valve with comp.
34	Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm
35	Wiring for Light point with 1.50sq mm FRLS PVC insulated insulated copper conductor single core cable in recessed medium class PVC conduit 2 way piano type switch, phenolic laminated sheet suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required
36	S/wireing of submain with two number 4 sq mm pvc insulated 1100 v grade single core aluminium conductor cable in 20 mm dia PVC conduit on surface with one number 2.5 sqmm PVC earthing wire continuity wire etc. complite in all respect. As SI No. 211(A)
37	Supply and fixing of 3.8 cm. (1½\\") thick country wood door fully panelled shutters including supply and fixing of wooden cleats stops and including fixing & adjustment of hinges, bolts, locks, handles spring and or other fittings
38	M.S or Iron working heary size in grills/Stair case railing /gate/trusher/racks etc.SIN502(A) for gate .70 kg per gate weight
39	S/F of 6 Amp to 32 Amp. SPMCB of As SI No. 1003 (B)
40	supply of LED Bulb
41	Construction work of community building in slum area in Ward-13 Jaibhimnagar. Excavation in foundation in ordinery soil (loam,caly or sand) i/c lift upto 1.5 m and lead upto 30 m and i/c filling watering and ramming of excavated earth
42	Concrete with 4 cm. gauge Brick Ballast fine sand of 1.25 F.M. and cement in proportion of 12:6:1 in foundation and under floors, including supply of all materials, labour. T & P etc. Required for proper completion the work.
43	M-150 brick work in 1:4 one cement and four course sand . mortar in foundation and plinth including supply of all materials labour, T & P etc required for proper complition of the work
44	M-150 brick work in 1:4 one cement and four course sand . mortar in Superstructure including supply of all materials labour, T & P etc required for proper complition of the work
45	R.C.C. Work with cement, approved coarse sand & 4 cm gauge approved stone grit in proportions of 1:1.5:3 excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire. in Columnand T-Beam
46	R.C.C. Work with cement, approved coarse sand & 4 cm gauge approved stone grit in proportions of 1:1.5:3 excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire. in slabs
47	Providing and laying \\"brick coba\\" 12mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15mm to each other, over 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30cm x cm and side wall parapet shall be mono tythic plaster wall upto 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary Coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including S/o all material, labour, T&P etc complete for proper completion of work.
48	Mild steel or iron such as in plane reinforcement concrete.
49	Sand filling in plinth and under floor including supply of necessary quantity of sand from a distance not exceeding 8 Kms. from the site of work and including watering, dressing etc. labour and T&P etc. required for proper coinplition of the work. saplings ol gl(h upto 30 cms. measurcd at a he;ght oi1 [4. above grcund level and removal of flrbbish uplo adjstance of 50 i,4. olt slde the periphery of area ctearcd.includiflg cosl ofsand.
50	Cement Concrete with 2 cm gauge approved stone grit,coarse sand & cement in the proportion of 8:4:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.
51	2.5 cm (1\\") thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2 cm. (1\\") graded approved stone grit, laid in panels finished with 3 mm. (1/8\\") floating coat of neat cement of cement and marble dust in ratio 5:1 as specified over and including 8 cm (3\\") thick base concrete consisting of cement, fine sand of 1.25 fineness modulus and brick ballast 4 cm. (1½\\") gauge in the proportion of 1:4:8 and removing any overlapping mortar at the joints of the penals if any and giving them a uniform finish, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work
52	12 mm thick plaster with1:4 Cement and four course sand including supply all material and labour, T & P required for proper completion of work
53	Supply and fixing 6 to 8 mm thick ivory or light shades vitrefied tiles 600x600 mm size in flooring and skirting with 1:3 approved cement and coarse sand morter finished with in its cement colour slurry, jointing and polished of approved quality complete, including supply of all materials, labour, tools and plants etc. required for proper completion of the work. as per direction of Engineer - in- charge
54	Supply and fixing 6 mm thick china white glazes tiles in flooring or in skirting or dado laid with 1:3 approved cement and coarse sand mortar finished with white cement slurry, jointing and polished of approved quality complete, including supply of all materials, labour, tools and plants etc. required for proper completion of the work as per direction of engineer-in- charge.
55	Chequerred precast CC tiles 22 mm thick in foothpath and courtyard in neat cement slurry incl. rubbing and cleaning etc complete on 20 mm thick bed on 1:4 cement mortar medium shade pigment using 50% white cement 50% grey cement
56	Providing wall putty on new surface with approved qwality
57	Distempering (first coat) with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N, Shalimar, Asian Paint after thoroughly brushing the surface free from mortar dropping and other foreign matters and also including the surface even with plaster of Paris or approved synthetic materials and sand papered smooth including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.but for every coat after thefirst coat.
58	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) For fixed portion Powder coated aluminium (minimumthickness of powder coating 50 micron)
59	For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost ofEPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimumthickness of powder coating 50 micron)
60	Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side
61	Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in-chargePowder coated minimum thickness 50 micron aluminium
62	Aluminium Tower-bolt
63	Providing and fixing stainlees steel (Grade 304) railing made of hollow tube, channels, plates, etc., including welding, grinding, buffing , Polisihing and making curvture (whereever required ) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with neccesary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of thr floor side of the waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fastners etc.) S.I.NO-10.28/ D.S.R-2023
64	providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side/top/centre hung, with beading and all members such as F7D, F4B, K11 and K12 B etc. complete of stanard rolled steel sections, joints including providing and fixing of hings, pivot, priming coat of complete all as per approved design, (sectional weight of only steel mebers shall be measured for payment). Fixing with 15X3 mm lugs 10 cm long embedded in cement conc. block 15X10X10 cm of C.C 1:3:6.
65	Providing and placing on terrace polythene water tank isi marked
66	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. a) 15 mm dia. nominal outer dia Pipes
67	b) 20 mm dia. nominal outer dia Pipes
68	PVC pipe of 110 mm for drainage system
69	Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C. pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required.
70	Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 30x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern
71	Providing and fixing C.P. brass bib cock of approved quality confirming to IS:8931 15 mm nominal bore
72	White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps
73	S/F 15 mm C.P. Brass angle valve with comp.
74	Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm
75	Wiring for Light point with 1.50sq mm FRLS PVC insulated insulated copper conductor single core cable in recessed medium class PVC conduit 2 way piano type switch, phenolic laminated sheet suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required
76	S/wireing of submain with two number 4 sq mm pvc insulated 1100 v grade single core aluminium conductor cable in 20 mm dia PVC conduit on surface with one number 2.5 sqmm PVC earthing wire continuity wire etc. complite in all respect. As SI No. 211(A)
77	Supply and fixing of 3.8 cm. (1½\\") thick country wood door fully panelled shutters including supply and fixing of wooden cleats stops and including fixing & adjustment of hinges, bolts, locks, handles spring and or other fittings
78	M.S or Iron working heary size in grills/Stair case railing /gate/trusher/racks etc.SIN502(A) for gate .70 kg per gate weight
79	S/F of 6 Amp to 32 Amp. SPMCB of As SI No. 1003 (B)
80	supply of LED Bulb
81	Work of installing interlocking tiles and benches on shed and Earpoch Road in cremation ground in Ward-09, Kasampur slum. Excavation in foundation in ordinary soil (Loam ,clay or sand )including lift upto 1.50 M. And lead upto 30 M. And including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or in to the plinth and removel and disposal of surplus earth as directed by the Engineer-in charge upto a distance of 30 M. from the foundation trenches.
82	Concrete with 4 cm. gauge Brick Ballast fine sand of 1.25 F.M. and cement in proportion are 12:6:1 in foundation and under floors, including supply of all materials, labour. T & P etc. Required for proper completion the work SI no.273.
83	M-150 brick work in 1:4one cement and four course sand . mortar in foundation and plinth including supply of all materials labour, T & P etc required for proper complition of the work S.I No.305 a
84	12 mm thick plaster 1:4 with Cement and four course sand including supply all material and labour, T & etc. SI No.584 (A)
85	Cement Concrete with 2.0 cm. gaug;e Approved stone grid coarse sand & cement in the proportion of 4:2:1 including , T&P etc. S.I. 279 (a)
86	R.C.C. Work with cement, approved coarse sand & 2 cm gauge approved stone grit in proportions of 1:1.5:3 in slab excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire. The rate excludes making of drip course which shall be paid extra.
87	M.S. (tor steel or plain) in Plain work such as R.C.C. or R.B. work including bending for proper shape and including supply of steel & its wastage, bend, hooks, and authorised overlapping shall be measured and including cost of binding wire.
88	Supply and providing 53mm to 22.5mm size stone aggregate
89	Laying spreading and consolidation of 12 cm (loose) thick coat of stone ballast but excluding roller charge As per SI no 755 b
90	Supplying & fixing 80 mm thick Precast cement concrete I shape inter locking paver block ISI mark confirming to IS 15658-2006 with top layer of minimum 5 mm thickness having plan dimention 200x( 160+120mm) of op cement , smooth high gloss finish, skid resistant,manufactured from rubur moulds through vibro -compression mechanism. The compressive strength of concrete pavar block shall not be less than 40MPa and weight 4.5 kg per no. including cost of meterial, with blanket layer of 4.00cm thick fine sand including labour T& P etc required for proper completion of the work as directed by Engineer-in-charge. grey and colour tile As S.I. No New Item 17
91	Providing wall putty on New surface with approvel quality material of Berger/J.K./Birla or similar make 2 coats
92	Providing cement primer on old/new surfaces
93	Finishing wall with water proof paint of approved make and quality with three coat as per SI No 660,+661
94	paniting roofs or other iron work in large area with one coat priming and one coat of approved (above one Sq Metre) paint (British antesol or equivalent) including supply of all materials labour Tools & plants etc required for proper completion of the work paint to be used ISI Marked. (S.I. 644+645 )
95	M.S. or iron work in stair case roilling in heavy sizes such as trusses, built up gates, records racks, roof work, Gates etc including rivetting or welding where necessary. S.I. 502 A
96	Supply and fixing Galvanized corrugated iron roofing 24 B.W.G. in position including supply of all materials, labour, Tools &plants etc. required for proper completion of the work and including wastage.
97	Supplying & fixing of Rcc bench as portal gem +all comp of work
98	Supply & fixing of sign board at site proper completion of work
99	Work of installing lights in the slum area of Ward-09, Kasampur Supply and fixing of 6 mtr GI octagonal Pole of approved make (top Dia 70 mm, bottom dia 130 mm and base plate 12 mm thick) having 3 mm thickness with single single arm bracket 1 mtr length in 1:2:4 RCC foundation, Bolt including the cost of foundation,excavaion & back filling and required T & P complete in all respect
100	Supply and fixing LED street light fitting having Dia cast aluminium body and differs with driver set suitable for 30 watt 240 watt confirming to IP 66 protection complete in all respect
101	Supply and Fixing Sign Board at site.+all comp.of work.
102	Work of installing lights in the slum area of Ward-13 Jaibhimnagar. Supply and fixing of 6 mtr GI octagonal Pole of approved make (top Dia 70 mm, bottom dia 130 mm and base plate 12 mm thick) having 3 mm thickness with single single arm bracket 1 mtr length in 1:2:4 RCC foundation, Bolt including the cost of foundation,excavaion & back filling and required T & P complete in all respect
103	Supply and fixing LED street light fitting having Dia cast aluminium body and differs with driver set suitable for 30 watt 240 watt confirming to IP 66 protection complete in all respect
104	Construction work of park in Ward-09 Kasampur slum. (a) Excavation in foundation in ordinary soil (Loam, clay or sand) including lift upto 1.50 M. and lead upto 30 M. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in charge upto a distance of 30 M. from the foundation trenches.
105	Concrete with 4 cm gauge brick ballast fine sand and cement in proportion are 1:6:12 in foundation and under floors, including supply of all materials, labour. T&P etc. required for proper completion the work [SIN No-273]
106	R.C.C. 1:1.5:3 in cement corse sand and stone grit. As SIN 284(A)
107	Mild steel or iron such as in plane reinforcement concrete. As S.I. No. 504
108	M-150 brick work in 1:4one cement and four course sand . mortar in foundation and plinth including supply of all materials labour, T & P etc required for proper complition of the work S.I No.305 a
109	Cement Concrete with 2.0 cm. gaug;e Approved stone grid coarse sand & cement in the proportion of 4:2:1 including , T&P etc. S.I. 279 (a)
110	12 mm thick plaster with cement and approved coarse sand mortar in 1:4 over brick work minium thickness not to be less than 1 Cm including supply of all material labour Tool & Plants etc. required for proper completion of the work. SIN No-584(A)
111	E/W in filling from out site 8km distance from site i/c all comp of work.
112	Providing wall putty on New surface with approvel quality material of Berger/J.K./Birla or similar make 2 coats
113	Finishing wall with water proof cement paint of approved make and quality on new work with two coat to give an even shade including supply of all materials, labour, Tools & plant etc. required for proper completion of the work.Same in item no. (660) but for each coat of water proof cement paint after the first two coat to give an even shade
114	M.S. or iron work of small sizes and section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work for grill weight per 60 kg For Gate weight per 85 kg
115	Paniting roofs or other iron work in large areas with two coat priming and one coat of approved (above one Sq Metre) paint (British antesol or equivalent) including supply of all materials labour Tools & plants etc required for proper completion of the work paint to be used ISI Marked. (S.I. 644,645 )
116	Su-kam LED solar light 15 watt 35 w pannel
117	Swedish Gym structure of pipe -35 mm pipe of leader 25 mm Area - 4.5m x 1.2 m, as item no AE 808
118	supply & fixing Cross Walker as item no AE 1303
119	supply & fixing High pull chair.
120	supply & fixing outdoor Rowing.
121	Supplying & fixing united sports emporium garden swing without roof 2 seater all complete work. rate as per gem portal
122	Supplying & fixing united sports emporium slide ladder virgin polytheylene terephthalate and full Arch shape all complete work. rate as per gem portal
123	Construction work of park in Ward-13 Jaibhimnagar slum. Excavation in foundation in ordinary soil (Loan, clay or sand) including lift upto 1.50M and lead upto 30M. and including filling watering and ramming of excavated earth into the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer-in-charge upto a distance of 30M. from the foundation trenches.
124	Concrete with 4 cm gauge brick ballast fine sand and cement in proportion are 1:6:12 in foundation and under floors, including supply of all materials, labour. T&P etc. required for proper completion the work.
125	M-150 Brick work in 1:4 one cement and three course sand, mortar in foundation in plinth including suopply of all material labour, T &P etc. required for proper completion of the work. S.I.No. 305(a)
126	12 mm thick plaster with cement and approved coarse sand mortar in 1:4 over brick work minium thickness not to be less than 1 Cm including supply of all material labour Tool & Plants etc. required for proper completion of the work. SIN No-584(A)
127	Cement Concrete with 2 cm gauge approved graded stone grit, coarse sand and cement in the proportion of 4:2:1, including supply of all materials, labour, tools & plants etc required for proper completion of the work As per direction of E/I.
128	R.C.C. 1:1.5:3 in cement coarse sand and grit 2 cm. gauge. SIN 284 A
129	Mild steel or iron such as in plane reinforcement concrete.SIN.504
130	Providing wall putty on New surface with approvel quality material of Berger/J.K./Birla or similar make 2 coatsfor plaster area
131	Finishing wall with water proof paint of approved make and quality with three coat as per SI No 660,661
132	Swedish Gym structure of pipe -35 mm pipe of leader 25 mm Area - 4.5m x 1.2 m, as item no AE 808
133	supply & fixing Cross Walker as item no AE 1303
134	supply & fixing High pull chair.
135	supply & fixing outdoor Rowing.
136	supply of fixing of dubble swing jola i/c all complete
137	supply of fixing oftwo seater see saw option 1. i/c all complete
138	Painting or varnishing two cort with one prining coat SIN 644+645
139	M.S or Iron working heary size in grills/Stair case railing /gate/trusher/racks etc.SIN502(A)
140	Construction work of study room/library in the slum located in Ward 09, Kasampur. (a) Excavation in foundation in ordinary soil (Loam, clay or sand) including lift upto 1.50 M. and lead upto 30 M. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in charge upto a distance of 30 M. from the foundation trenches. (where machine can not move )
141	(a) Sand filling in plinth and under floor including supply of necessary quantity of sand from a distance not exceeding 8 Kms. from the site of work and including watering, dressing etc. labour and T&P etc. required for proper complition of the work. saplings of girth upto 30 cms. measured at a height of 1 M. above ground level and removal of rubbish upto a distance of 50 M. out side the periphery of area cleared. including cost of sand.
142	Concrete with 4 cm. gauge Brick Ballast fine sand of 1.25 F.M. and cement in proportion are 12:6:1 in foundation and under floors, including supply of all materials, labour. T & P etc. Required for proper completion the work.
143	M-150 brick work in 1:4 one cement and four course sand . mortar in foundation and plinth including supply of all materials labour, T & P etc required for proper complition of the work
144	M-150 brick work in 1:4one cement and four course sand . mortar in superstructure including supply of all materials labour, T & P etc required for proper complition of the work
145	12 mm thick plaster 1:4 with Cement and four course sand including supply all material and labour, T & etc.
146	Cement Concrete with 2.0 cm. gaug;e Approved stone grid coarse sand & cement in the proportion of 4:2:1 including , T&P etc.
147	2.5 cm (1\\") lhick 1:2:4 plain cemeht concrcte floor with cement apprcved coarse sand and 2 cm. (1\\") graded approved stone g t laid in panes linlshed with 3 mm. (1/8\\") floating coat of neat cement oi cemeni and marble dusl in rato 5:1 as specified over and including B cm (3') thick base concrete consisting of cemenl, frne sand of 1.25 lineness modulus and brick ballast 4 cm. (1%')gauge in the plopodion of 1:4:8 and removing any ovedapping modar al the joints of the penals if any and giving lhem F unifo.m iinish, including.supply of all materials, labour, Tools & plants elc. required for proper completion of the work
148	Providing wall putty on new surface with approved qwality in all com
149	paniting roofs or other iron work in large areas with one coat priming and one coat of approved (above one Sq Metre) paint (British antesol or equivalent) including supply of all materials labour Tools & plants etc required for proper completion of the work paint to be used ISI Marked.
150	M.S or Iron working heary size in grills/Stair case railing /gate/trusher/racks etc.SIN502(A)
151	Oil bound distemper ofapproved brand and manufacture and of required shadeon undercoated wall surface to give an eves hade over & including a priming coat with cement primer of approvedbrand and manufacture such as Berger, J&N, Shalimar,Asian, paints after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even with plaster of approved synthetic material and sand papered smooth ncluding cost of all materials.
152	R.C.C. Work with cement, approved coarse sand & 2 cm gauge approved stone grit in proportions of 1:1.5;3 in lintels of door & windows excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire. The rate excludes making of drip course which shall be paid extra.
153	RCC 1:1.5:3 in cement coarse sand and grit 2 cm. gauge.
154	Mild steel or iron such as in plane reinforcement concrete.
155	Providing and placing on terrace polyethylene water storage tank isi marked.
156	P/F water closed sqm. Fitting Orissa pattern W.C. pan of size 580x440 mm Hindware or Equivalent with integral type foot rests and 1 piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white 5 litre P.V.C. automatic flushing cistern, with fitting, standard size G.I. flush pipe for back and front flush withk standard spreader pipes with fittings, G.I. clamps and C.P. brass coupling complete including painting of fittings and cutting and making good the walls and floors etc. wherever required. As SI No. 21.12
157	S/F of 550x400 size wash basin including C.I. Bracket c.p brass and c.p. brass waste pipe of standard patter with single 15 mm c. p brasspiller tap
158	Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes having thermal stability for hot & cold water supply i/c all CPVC plain & brass threaded fitting i/c fixing the pipe with clamps at 1.0 m spacing this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same i/c testing of joints complete as per direction of engineer in charge. 15 mm dia nominal outer dia pipes
159	20 mm dia nominal outer dia pipes
160	P/F 15 mm nominal CP brass bib cock of approved quality conferming to IS 8931
161	S/F 15 mm C.P. Brass angle valve with comp.
162	Supply and fixing of 10 cm (4\\") inernal dia P.V.C. down pipes Everest or Charminar make complete with bends with door at top and plain at bottom and grantings and including supply of necessary M.S. clamp 2.5 cm x 3 mm (1\\"x1/8\\") fixed to walls with and including supply of 15 cm (6\\") long 6 mm (1/4\\") dia nail all materials, labour and T&P etc. required for proper complection of the work and also including repair of plaster pointing etc. if damaged during fixing of the pipes.
163	Wiring point for light with 1.5 sqm. m PVC insulated single core cable including PVC conduit pipe (S.I. No. 131C)
164	S/F switch box made up of 16 swq 250x200x65 thick As SI No. 162
165	S/wireing of submain with two number 4 sq mm pvc insulated 1100 v grade single core aluminium conductor cable in 20 mm dia PVC conduit on surface with one number 2.5 sqmm PVC earthing wire continuity wire etc. complite in all respect. As SI No. 211(A)
166	S/F of 6 Amp to 32 Amp. SPMCB of As SI No. 1003 (B)
167	Supply and fixing Galvanized comugated iron roofing 24 B.W.G. in position including supply of all materials, labour, tools & plants etc. Required for proper completion of the work and including wastage.
168	Construction work of study room/library in the slum located in Ward 13 Jaibhimnagar. (a) Excavation in foundation in ordinary soil (Loam, clay or sand) including lift upto 1.50 M. and lead upto 30 M. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in charge upto a distance of 30 M. from the foundation trenches. (where machine can not move )
169	(a) Sand filling in plinth and under floor including supply of necessary quantity of sand from a distance not exceeding 8 Kms. from the site of work and including watering, dressing etc. labour and T&P etc. required for proper complition of the work. saplings of girth upto 30 cms. measured at a height of 1 M. above ground level and removal of rubbish upto a distance of 50 M. out side the periphery of area cleared. including cost of sand.
170	Concrete with 4 cm. gauge Brick Ballast fine sand of 1.25 F.M. and cement in proportion are 12:6:1 in foundation and under floors, including supply of all materials, labour. T & P etc. Required for proper completion the work.
171	M-150 brick work in 1:4 one cement and four course sand . mortar in foundation and plinth including supply of all materials labour, T & P etc required for proper complition of the work
172	M-150 brick work in 1:4one cement and four course sand . mortar in superstructure including supply of all materials labour, T & P etc required for proper complition of the work
173	12 mm thick plaster 1:4 with Cement and four course sand including supply all material and labour, T & etc.
174	Cement Concrete with 2.0 cm. gaug;e Approved stone grid coarse sand & cement in the proportion of 4:2:1 including , T&P etc.
175	2.5 cm (1\\") lhick 1:2:4 plain cemeht concrcte floor with cement apprcved coarse sand and 2 cm. (1\\") graded approved stone g t laid in panes linlshed with 3 mm. (1/8\\") floating coat of neat cement oi cemeni and marble dusl in rato 5:1 as specified over and including B cm (3') thick base concrete consisting of cemenl, frne sand of 1.25 lineness modulus and brick ballast 4 cm. (1%')gauge in the plopodion of 1:4:8 and removing any ovedapping modar al the joints of the penals if any and giving lhem F unifo.m iinish, including.supply of all materials, labour, Tools & plants elc. required for proper completion of the work
176	Providing wall putty on new surface with approved qwality in all com
177	paniting roofs or other iron work in large areas with one coat priming and one coat of approved (above one Sq Metre) paint (British antesol or equivalent) including supply of all materials labour Tools & plants etc required for proper completion of the work paint to be used ISI Marked.
178	M.S or Iron working heary size in grills/Stair case railing /gate/trusher/racks etc.SIN502(A)
179	Oil bound distemper ofapproved brand and manufacture and of required shadeon undercoated wall surface to give an eves hade over & including a priming coat with cement primer of approvedbrand and manufacture such as Berger, J&N, Shalimar,Asian, paints after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even with plaster of approved synthetic material and sand papered smooth ncluding cost of all materials.
180	R.C.C. Work with cement, approved coarse sand & 2 cm gauge approved stone grit in proportions of 1:1.5;3 in lintels of door & windows excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire. The rate excludes making of drip course which shall be paid extra.
181	RCC 1:1.5:3 in cement coarse sand and grit 2 cm. gauge.
182	Mild steel or iron such as in plane reinforcement concrete.
183	Providing and placing on terrace polyethylene water storage tank isi marked.
184	P/F water closed sqm. Fitting Orissa pattern W.C. pan of size 580x440 mm Hindware or Equivalent with integral type foot rests and 1 piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white 5 litre P.V.C. automatic flushing cistern, with fitting, standard size G.I. flush pipe for back and front flush withk standard spreader pipes with fittings, G.I. clamps and C.P. brass coupling complete including painting of fittings and cutting and making good the walls and floors etc. wherever required. As SI No. 21.12
185	S/F of 550x400 size wash basin including C.I. Bracket c.p brass and c.p. brass waste pipe of standard patter with single 15 mm c. p brasspiller tap
186	Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes having thermal stability for hot & cold water supply i/c all CPVC plain & brass threaded fitting i/c fixing the pipe with clamps at 1.0 m spacing this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same i/c testing of joints complete as per direction of engineer in charge. 15 mm dia nominal outer dia pipes
187	20 mm dia nominal outer dia pipes
188	P/F 15 mm nominal CP brass bib cock of approved quality conferming to IS 8931
189	S/F 15 mm C.P. Brass angle valve with comp.
190	Supply and fixing of 10 cm (4\\") inernal dia P.V.C. down pipes Everest or Charminar make complete with bends with door at top and plain at bottom and grantings and including supply of necessary M.S. clamp 2.5 cm x 3 mm (1\\"x1/8\\") fixed to walls with and including supply of 15 cm (6\\") long 6 mm (1/4\\") dia nail all materials, labour and T&P etc. required for proper complection of the work and also including repair of plaster pointing etc. if damaged during fixing of the pipes.
191	Wiring point for light with 1.5 sqm. m PVC insulated single core cable including PVC conduit pipe (S.I. No. 131C)
192	S/F switch box made up of 16 swq 250x200x65 thick As SI No. 162
193	S/wireing of submain with two number 4 sq mm pvc insulated 1100 v grade single core aluminium conductor cable in 20 mm dia PVC conduit on surface with one number 2.5 sqmm PVC earthing wire continuity wire etc. complite in all respect. As SI No. 211(A)
194	S/F of 6 Amp to 32 Amp. SPMCB of As SI No. 1003 (B)
195	Supply and fixing Galvanized comugated iron roofing 24 B.W.G. in position including supply of all materials, labour, tools & plants etc. Required for proper completion of the work and including wastage.
196	Construction work of six seater public toilet and five seater urinal in Ward-09 Excavation in foundation in ordinery soil (loam,caly or sand) i/c lift upto 1.5 m and lead upto 30 m and i/c filling watering and ramming of excavated earth
197	Concrete with 4 cm. gauge Brick Ballast fine sand of 1.25 F.M. and cement in proportion of 12:6:1 in foundation and under floors, including supply of all materials, labour. T & P etc. Required for proper completion the work.
198	M-150 brick work in 1:4 one cement and four course sand . mortar in foundation and plinth including supply of all materials labour, T & P etc required for proper complition of the work
199	M-150 brick work in 1:4 one cement and four course sand . mortar in Superstructure including supply of all materials labour, T & P etc required for proper complition of the work
200	R.C.C. Work with cement, approved coarse sand & 4 cm gauge approved stone grit in proportions of 1:1.5:3 excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire. in Columnand T-Beam
201	R.C.C. Work with cement, approved coarse sand & 4 cm gauge approved stone grit in proportions of 1:1.5:3 excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire. in slabs
202	Providing and laying \\"brick coba\\" 12mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15mm to each other, over 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30cm x cm and side wall parapet shall be mono tythic plaster wall upto 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary Coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including S/o all material, labour, T&P etc complete for proper completion of work.
203	Mild steel or iron such as in plane reinforcement concrete.
204	Sand filling in plinth and under floor including supply of necessary quantity of sand from a distance not exceeding 8 Kms. from the site of work and including watering, dressing etc. labour and T&P etc. required for proper coinplition of the work. saplings ol gl(h upto 30 cms. measurcd at a he;ght oi1 [4. above grcund level and removal of flrbbish uplo adjstance of 50 i,4. olt slde the periphery of area ctearcd.includiflg cosl ofsand.
205	Cement Concrete with 2 cm gauge approved stone grit,coarse sand & cement in the proportion of 8:4:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.
206	2.5 cm (1\\") thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2 cm. (1\\") graded approved stone grit, laid in panels finished with 3 mm. (1/8\\") floating coat of neat cement of cement and marble dust in ratio 5:1 as specified over and including 8 cm (3\\") thick base concrete consisting of cement, fine sand of 1.25 fineness modulus and brick ballast 4 cm. (1½\\") gauge in the proportion of 1:4:8 and removing any overlapping mortar at the joints of the penals if any and giving them a uniform finish, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work
207	12 mm thick plaster with1:4 Cement and four course sand including supply all material and labour, T & P required for proper completion of work
208	Supply and fixing 6 to 8 mm thick ivory or light shades vitrefied tiles 600x600 mm size in flooring and skirting with 1:3 approved cement and coarse sand morter finished with in its cement colour slurry, jointing and polished of approved quality complete, including supply of all materials, labour, tools and plants etc. required for proper completion of the work. as per direction of Engineer - in- charge
209	Supply and fixing 6 mm thick china white glazes tiles in flooring or in skirting or dado laid with 1:3 approved cement and coarse sand mortar finished with white cement slurry, jointing and polished of approved quality complete, including supply of all materials, labour, tools and plants etc. required for proper completion of the work as per direction of engineer-in- charge.
210	Chequerred precast CC tiles 22 mm thick in foothpath and courtyard in neat cement slurry incl. rubbing and cleaning etc complete on 20 mm thick bed on 1:4 cement mortar medium shade pigment using 50% white cement 50% grey cement
211	Providing wall putty on new surface with approved qwality
212	Distempering (first coat) with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N, Shalimar, Asian Paint after thoroughly brushing the surface free from mortar dropping and other foreign matters and also including the surface even with plaster of Paris or approved synthetic materials and sand papered smooth including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.but for every coat after thefirst coat.
213	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) For fixed portion Powder coated aluminium (minimumthickness of powder coating 50 micron)
214	For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost ofEPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimumthickness of powder coating 50 micron)
215	Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side
216	Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in-chargePowder coated minimum thickness 50 micron aluminium
217	Aluminium Tower-bolt
218	Providing and fixing stainlees steel (Grade 304) railing made of hollow tube, channels, plates, etc., including welding, grinding, buffing , Polisihing and making curvture (whereever required ) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with neccesary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of thr floor side of the waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fastners etc.) S.I.NO-10.28/ D.S.R-2023
219	providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side/top/centre hung, with beading and all members such as F7D, F4B, K11 and K12 B etc. complete of stanard rolled steel sections, joints including providing and fixing of hings, pivot, priming coat of complete all as per approved design, (sectional weight of only steel mebers shall be measured for payment). Fixing with 15X3 mm lugs 10 cm long embedded in cement conc. block 15X10X10 cm of C.C 1:3:6.
220	Providing and placing on terrace polythene water tank isi marked
221	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. a) 15 mm dia. nominal outer dia Pipes
222	b) 20 mm dia. nominal outer dia Pipes
223	PVC pipe of 110 mm for drainage system
224	P/F water closed sqm. Fitting Orissa pattern W.C. pan of size 580x440 mm Hindware or Equivalent with integral type foot rests and 1 piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white 5 litre P.V.C. automatic flushing cistern, with fitting, standard size G.I. flush pipe for back and front flush withk standard spreader pipes with fittings, G.I. clamps and C.P. brass coupling complete including painting of fittings and cutting and making good the walls and floors etc. wherever required. As SI No. 21.12
225	Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C. pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required.
226	Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 30x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern
227	Providing and fixing C.P. brass bib cock of approved quality confirming to IS:8931 15 mm nominal bore
228	White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps
229	S/F 15 mm C.P. Brass angle valve with comp.
230	Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm
231	Wiring for Light point with 1.50sq mm FRLS PVC insulated insulated copper conductor single core cable in recessed medium class PVC conduit 2 way piano type switch, phenolic laminated sheet suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required
232	S/wireing of submain with two number 4 sq mm pvc insulated 1100 v grade single core aluminium conductor cable in 20 mm dia PVC conduit on surface with one number 2.5 sqmm PVC earthing wire continuity wire etc. complite in all respect. As SI No. 211(A)
233	S/F of 6 Amp to 32 Amp. SPMCB of As SI No. 1003 (B)
234	supply of LED Bulb
235	S/F Sign Bord all Complete
236	Construction work of six seater public toilet and five seater urinal in Ward-13 Excavation in foundation in ordinery soil (loam,caly or sand) i/c lift upto 1.5 m and lead upto 30 m and i/c filling watering and ramming of excavated earth
237	Concrete with 4 cm. gauge Brick Ballast fine sand of 1.25 F.M. and cement in proportion of 12:6:1 in foundation and under floors, including supply of all materials, labour. T & P etc. Required for proper completion the work.
238	M-150 brick work in 1:4 one cement and four course sand . mortar in foundation and plinth including supply of all materials labour, T & P etc required for proper complition of the work
239	M-150 brick work in 1:4 one cement and four course sand . mortar in Superstructure including supply of all materials labour, T & P etc required for proper complition of the work
240	R.C.C. Work with cement, approved coarse sand & 4 cm gauge approved stone grit in proportions of 1:1.5:3 excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire. in Columnand T-Beam
241	R.C.C. Work with cement, approved coarse sand & 4 cm gauge approved stone grit in proportions of 1:1.5:3 excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire. in slabs
242	Providing and laying \\"brick coba\\" 12mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15mm to each other, over 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30cm x cm and side wall parapet shall be mono tythic plaster wall upto 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary Coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including S/o all material, labour, T&P etc complete for proper completion of work.
243	Mild steel or iron such as in plane reinforcement concrete.
244	Sand filling in plinth and under floor including supply of necessary quantity of sand from a distance not exceeding 8 Kms. from the site of work and including watering, dressing etc. labour and T&P etc. required for proper coinplition of the work. saplings ol gl(h upto 30 cms. measurcd at a he;ght oi1 [4. above grcund level and removal of flrbbish uplo adjstance of 50 i,4. olt slde the periphery of area ctearcd.includiflg cosl ofsand.
245	Cement Concrete with 2 cm gauge approved stone grit,coarse sand & cement in the proportion of 8:4:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.
246	2.5 cm (1\\") thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2 cm. (1\\") graded approved stone grit, laid in panels finished with 3 mm. (1/8\\") floating coat of neat cement of cement and marble dust in ratio 5:1 as specified over and including 8 cm (3\\") thick base concrete consisting of cement, fine sand of 1.25 fineness modulus and brick ballast 4 cm. (1½\\") gauge in the proportion of 1:4:8 and removing any overlapping mortar at the joints of the penals if any and giving them a uniform finish, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work
247	12 mm thick plaster with1:4 Cement and four course sand including supply all material and labour, T & P required for proper completion of work
248	Supply and fixing 6 to 8 mm thick ivory or light shades vitrefied tiles 600x600 mm size in flooring and skirting with 1:3 approved cement and coarse sand morter finished with in its cement colour slurry, jointing and polished of approved quality complete, including supply of all materials, labour, tools and plants etc. required for proper completion of the work. as per direction of Engineer - in- charge
249	Supply and fixing 6 mm thick china white glazes tiles in flooring or in skirting or dado laid with 1:3 approved cement and coarse sand mortar finished with white cement slurry, jointing and polished of approved quality complete, including supply of all materials, labour, tools and plants etc. required for proper completion of the work as per direction of engineer-in- charge.
250	Chequerred precast CC tiles 22 mm thick in foothpath and courtyard in neat cement slurry incl. rubbing and cleaning etc complete on 20 mm thick bed on 1:4 cement mortar medium shade pigment using 50% white cement 50% grey cement
251	Providing wall putty on new surface with approved qwality
252	Distempering (first coat) with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N, Shalimar, Asian Paint after thoroughly brushing the surface free from mortar dropping and other foreign matters and also including the surface even with plaster of Paris or approved synthetic materials and sand papered smooth including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.but for every coat after thefirst coat.
253	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) For fixed portion Powder coated aluminium (minimumthickness of powder coating 50 micron)
254	For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost ofEPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimumthickness of powder coating 50 micron)
255	Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side
256	Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in-chargePowder coated minimum thickness 50 micron aluminium
257	Aluminium Tower-bolt
258	Providing and fixing stainlees steel (Grade 304) railing made of hollow tube, channels, plates, etc., including welding, grinding, buffing , Polisihing and making curvture (whereever required ) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with neccesary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of thr floor side of the waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fastners etc.) S.I.NO-10.28/ D.S.R-2023
259	providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side/top/centre hung, with beading and all members such as F7D, F4B, K11 and K12 B etc. complete of stanard rolled steel sections, joints including providing and fixing of hings, pivot, priming coat of complete all as per approved design, (sectional weight of only steel mebers shall be measured for payment). Fixing with 15X3 mm lugs 10 cm long embedded in cement conc. block 15X10X10 cm of C.C 1:3:6.
260	Providing and placing on terrace polythene water tank isi marked
261	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. a) 15 mm dia. nominal outer dia Pipes
262	b) 20 mm dia. nominal outer dia Pipes
263	PVC pipe of 110 mm for drainage system
264	P/F water closed sqm. Fitting Orissa pattern W.C. pan of size 580x440 mm Hindware or Equivalent with integral type foot rests and 1 piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white 5 litre P.V.C. automatic flushing cistern, with fitting, standard size G.I. flush pipe for back and front flush withk standard spreader pipes with fittings, G.I. clamps and C.P. brass coupling complete including painting of fittings and cutting and making good the walls and floors etc. wherever required. As SI No. 21.12
265	Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C. pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required.
266	Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 30x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern
267	Providing and fixing C.P. brass bib cock of approved quality confirming to IS:8931 15 mm nominal bore
268	White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps
269	S/F 15 mm C.P. Brass angle valve with comp.
270	Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm
271	Wiring for Light point with 1.50sq mm FRLS PVC insulated insulated copper conductor single core cable in recessed medium class PVC conduit 2 way piano type switch, phenolic laminated sheet suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required
272	S/wireing of submain with two number 4 sq mm pvc insulated 1100 v grade single core aluminium conductor cable in 20 mm dia PVC conduit on surface with one number 2.5 sqmm PVC earthing wire continuity wire etc. complite in all respect. As SI No. 211(A)
273	S/F of 6 Amp to 32 Amp. SPMCB of As SI No. 1003 (B)
274	supply of LED Bulb
275	S/F Sign Bord all Complete
276	Ward-09, Tikaram Colony, construction of drain and CC road from Sundar Pal to Ravi's house and in the nearby lanes. E/W in filling from out site 12km distance from site i/c all comp of work.
277	Concrete with 4 cm gauge brick ballast fine sand and cement in proportion are 1:6:12 in foundation and under floors, including supply of all materials, labour. T&P etc. required for proper completion the work [SIN No-273]
278	M-150 Brick work in 1:4 one cement and four course sand, mortar in foundation in plinth including suopply of all material labour, T &P etc. required for proper completion of the work. SIN No- 305(A)
279	Cement Concrete with 2 cm gauge approved graded stoneee grit, coarse sand and cement in the proportion of 4:2:1, including supply of all materials, labour, tools & plants etc required for proper completion of the work As per direction of E/I. [S.I No. 279(a)]
280	12 mm thick plaster with cement and approved coarse sand mortar in 1:4 over brick work minium thickness not to be less than 1 Cm including supply of all material labour Tool & Plants etc. required for proper completion of the work. SIN No-584(A)
281	Construction of Granular sub base by providing coarse graded material spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotavator at OMC and compacting with vibratory roller to achieve the desired density,complete as per clause 401
282	Consalidation of stoneee ballast excluding of roller charges and excluding all.
283	Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per disign, over a prepared sub base with 43 grade cement or any other type as per Clause 1501.2.2 (1:1½:3) coarse and fine aggregates confirming to IS 383 maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less then 0.2 cum capacity and appropriate weight batcher using approved mix design, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels. rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints as per norms, applying debonding strips primer, sealant, dowel bars, near approaches to bridge/ culvert and construction, joints, admixtures as approved, curing of concrete slabs for 14-days, curing compound (Where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 including Cost of Polythene Sheet and Dowel bar and also including complete shifting of matrials & Concrete etc.(M-20)
284	Trimix for C.C. road etc.including hire & fuel charges of Concrete floater + all comp.of work
285	Providing & Applying concrete hardner on C.C. road top surface etc. all comp.of work
286	Providing and filling in position rubberized bitumen hot sealing compond for sealing of expansion joints in road/pavement including groove cutting as per norms etc.all complete as per direction of Engineer-in-charge.
287	R.C.C. 1:1.5:3 in cement corse sand and stone grit. As SIN 284(A)
288	Mild steel or iron such as in plane reinforcement concrete. As S.I. No. 504
289	Supply and Fixing Sign Board at site.+all comp.of work.
290	In Ward-09, Kasampur Mohalla Tel Mandi, from Manoj's house to Pankaj's house, from Shani to Bunty, in Raju and Sonu's street, construction work of drain and road by CC. Dismentling Reinforce cement concrete or reinforce brick work including stacking of material as direct by the engineer charge with in a distance of 60 meter (200 feet)
291	Dismentling of B/W in cement motar with all comp of work
292	Dismentling of Old interlocking tiles with all comp.S.I No.New Item 4
293	Concrete with 4 cm gauge brick ballast fine sand and cement in proportion are 1:6:12 in foundation and under floors, including supply of all materials, labour. T&P etc. required for proper completion the work [SIN No-273]
294	M-150 Brick work in 1:4 one cement and four course sand, mortar in foundation in plinth including suopply of all material labour, T &P etc. required for proper completion of the work. SIN No- 305(A)
295	Cement Concrete with 2 cm gauge approved graded stoneee grit, coarse sand and cement in the proportion of 4:2:1, including supply of all materials, labour, tools & plants etc required for proper completion of the work As per direction of E/I. [S.I No. 279(a)]
296	12 mm thick plaster with cement and approved coarse sand mortar in 1:4 over brick work minium thickness not to be less than 1 Cm including supply of all material labour Tool & Plants etc. required for proper completion of the work. SIN No-584(A)
297	Construction of Granular sub base by providing coarse graded material spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotavator at OMC and compacting with vibratory roller to achieve the desired density,complete as per clause 401
298	Consalidation of stoneee ballast excluding of roller charges and excluding all.
299	Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per disign, over a prepared sub base with 43 grade cement or any other type as per Clause 1501.2.2 (1:1½:3) coarse and fine aggregates confirming to IS 383 maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less then 0.2 cum capacity and appropriate weight batcher using approved mix design, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels. rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints as per norms, applying debonding strips primer, sealant, dowel bars, near approaches to bridge/ culvert and construction, joints, admixtures as approved, curing of concrete slabs for 14-days, curing compound (Where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 including Cost of Polythene Sheet and Dowel bar and also including complete shifting of matrials & Concrete etc.(M-20)
300	Trimix for C.C. road etc.including hire & fuel charges of Concrete floater + all comp.of work
301	Providing & Applying concrete hardner on C.C. road top surface etc. all comp.of work
302	Providing and filling in position rubberized bitumen hot sealing compond for sealing of expansion joints in road/pavement including groove cutting as per norms etc.all complete as per direction of Engineer-in-charge.
303	R.C.C. 1:1.5:3 in cement corse sand and stone grit. As SIN 284(A)
304	Mild steel or iron such as in plane reinforcement concrete. As S.I. No. 504
305	Deduction cost of old C.C Tiles+all comp of work
306	Deduction cost of old brick
307	Deduction cost of old brick bat
308	Supply and Fixing Sign Board at site.+all comp.of work.
309	In Ward-09, Kasampur Mohalla Tel Mandi, from Sohanpal Singh's house to Sadan Lal Manothia's house, from Anar Singh to R.S. Verma, from Thapa to Harishankar Dharampal to Mangu Deepchand to Sanjay, construction of drain and road through CC. Dismentling Reinforce cement concrete or reinforce brick work including stacking of material as direct by the engineer charge with in a distance of 60 meter (200 feet)
310	Dismentling of B/W in cement motar with all comp of work
311	Dismentling of Old interlocking tiles with all comp.S.I No.New Item 4
312	Concrete with 4 cm gauge brick ballast fine sand and cement in proportion are 1:6:12 in foundation and under floors, including supply of all materials, labour. T&P etc. required for proper completion the work [SIN No-273]
313	M-150 Brick work in 1:4 one cement and four course sand, mortar in foundation in plinth including suopply of all material labour, T &P etc. required for proper completion of the work. SIN No- 305(A)
314	Cement Concrete with 2 cm gauge approved graded stoneee grit, coarse sand and cement in the proportion of 4:2:1, including supply of all materials, labour, tools & plants etc required for proper completion of the work As per direction of E/I. [S.I No. 279(a)]
315	12 mm thick plaster with cement and approved coarse sand mortar in 1:4 over brick work minium thickness not to be less than 1 Cm including supply of all material labour Tool & Plants etc. required for proper completion of the work. SIN No-584(A)
316	Construction of Granular sub base by providing coarse graded material spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotavator at OMC and compacting with vibratory roller to achieve the desired density,complete as per clause 401
317	Consalidation of stoneee ballast excluding of roller charges and excluding all.
318	Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per disign, over a prepared sub base with 43 grade cement or any other type as per Clause 1501.2.2 (1:1½:3) coarse and fine aggregates confirming to IS 383 maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less then 0.2 cum capacity and appropriate weight batcher using approved mix design, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels. rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints as per norms, applying debonding strips primer, sealant, dowel bars, near approaches to bridge/ culvert and construction, joints, admixtures as approved, curing of concrete slabs for 14-days, curing compound (Where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 including Cost of Polythene Sheet and Dowel bar and also including complete shifting of matrials & Concrete etc.(M-20)
319	Trimix for C.C. road etc.including hire & fuel charges of Concrete floater + all comp.of work
320	Providing & Applying concrete hardner on C.C. road top surface etc. all comp.of work
321	Providing and filling in position rubberized bitumen hot sealing compond for sealing of expansion joints in road/pavement including groove cutting as per norms etc.all complete as per direction of Engineer-in-charge.
322	R.C.C. 1:1.5:3 in cement corse sand and stone grit. As SIN 284(A)
323	Mild steel or iron such as in plane reinforcement concrete. As S.I. No. 504
324	Deduction cost of old C.C Tiles+all comp of work
325	Deduction cost of old brick
326	Deduction cost of old brick bat
327	Supply and Fixing Sign Board at site.+all comp.of work.
328	In Ward-09, Kasampur, from Bhushan's house to Jaipal Singh's house, from Ajay to Dinesh, from Bittu to Rajkumar and from Shailendra to Dhanna Baba Temple and in the street of Valmiki Temple, construction of drain and road through CC. Dismentling Reinforce cement concrete or reinforce brick work including stacking of material as direct by the engineer charge with in a distance of 60 meter (200 feet)
329	Dismentling of B/W in cement motar with all comp of work
330	Dismentling of Old interlocking tiles with all comp.S.I No.New Item 4
331	Concrete with 4 cm gauge brick ballast fine sand and cement in proportion are 1:6:12 in foundation and under floors, including supply of all materials, labour. T&P etc. required for proper completion the work [SIN No-273]
332	M-150 Brick work in 1:4 one cement and four course sand, mortar in foundation in plinth including suopply of all material labour, T &P etc. required for proper completion of the work. SIN No- 305(A)
333	Cement Concrete with 2 cm gauge approved graded stoneee grit, coarse sand and cement in the proportion of 4:2:1, including supply of all materials, labour, tools & plants etc required for proper completion of the work As per direction of E/I. [S.I No. 279(a)]
334	12 mm thick plaster with cement and approved coarse sand mortar in 1:4 over brick work minium thickness not to be less than 1 Cm including supply of all material labour Tool & Plants etc. required for proper completion of the work. SIN No-584(A)
335	Construction of Granular sub base by providing coarse graded material spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotavator at OMC and compacting with vibratory roller to achieve the desired density,complete as per clause 401
336	Consalidation of stoneee ballast excluding of roller charges and excluding all.
337	Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per disign, over a prepared sub base with 43 grade cement or any other type as per Clause 1501.2.2 (1:1½:3) coarse and fine aggregates confirming to IS 383 maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less then 0.2 cum capacity and appropriate weight batcher using approved mix design, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels. rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints as per norms, applying debonding strips primer, sealant, dowel bars, near approaches to bridge/ culvert and construction, joints, admixtures as approved, curing of concrete slabs for 14-days, curing compound (Where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 including Cost of Polythene Sheet and Dowel bar and also including complete shifting of matrials & Concrete etc.(M-20)
338	Trimix for C.C. road etc.including hire & fuel charges of Concrete floater + all comp.of work
339	Providing & Applying concrete hardner on C.C. road top surface etc. all comp.of work
340	Providing and filling in position rubberized bitumen hot sealing compond for sealing of expansion joints in road/pavement including groove cutting as per norms etc.all complete as per direction of Engineer-in-charge.
341	R.C.C. 1:1.5:3 in cement corse sand and stone grit. As SIN 284(A)
342	Mild steel or iron such as in plane reinforcement concrete. As S.I. No. 504
343	Deduction cost of old C.C Tiles+all comp of work
344	Deduction cost of old brick
345	Deduction cost of old brick bat
346	Supply and Fixing Sign Board at site.+all comp.of work.
347	In Ward-09, Kasampur Bazaar, in street no. 06 from Suresh Lodhi's house to Natthu's house, in street no. 08 from Deepak to Kedar and from Prem to Master Pritam, construction of drain and road through CC. Dismentling Reinforce cement concrete or reinforce brick work including stacking of material as direct by the engineer charge with in a distance of 60 meter (200 feet)
348	Dismentling of B/W in cement motar with all comp of work
349	Dismentling of Old interlocking tiles with all comp.S.I No.New Item 4
350	Concrete with 4 cm gauge brick ballast fine sand and cement in proportion are 1:6:12 in foundation and under floors, including supply of all materials, labour. T&P etc. required for proper completion the work [SIN No-273]
351	M-150 Brick work in 1:4 one cement and four course sand, mortar in foundation in plinth including suopply of all material labour, T &P etc. required for proper completion of the work. SIN No- 305(A)
352	Cement Concrete with 2 cm gauge approved graded stoneee grit, coarse sand and cement in the proportion of 4:2:1, including supply of all materials, labour, tools & plants etc required for proper completion of the work As per direction of E/I. [S.I No. 279(a)]
353	12 mm thick plaster with cement and approved coarse sand mortar in 1:4 over brick work minium thickness not to be less than 1 Cm including supply of all material labour Tool & Plants etc. required for proper completion of the work. SIN No-584(A)
354	Construction of Granular sub base by providing coarse graded material spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotavator at OMC and compacting with vibratory roller to achieve the desired density,complete as per clause 401
355	Consalidation of stoneee ballast excluding of roller charges and excluding all.
356	Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per disign, over a prepared sub base with 43 grade cement or any other type as per Clause 1501.2.2 (1:1½:3) coarse and fine aggregates confirming to IS 383 maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less then 0.2 cum capacity and appropriate weight batcher using approved mix design, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels. rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints as per norms, applying debonding strips primer, sealant, dowel bars, near approaches to bridge/ culvert and construction, joints, admixtures as approved, curing of concrete slabs for 14-days, curing compound (Where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 including Cost of Polythene Sheet and Dowel bar and also including complete shifting of matrials & Concrete etc.(M-20)
357	Trimix for C.C. road etc.including hire & fuel charges of Concrete floater + all comp.of work
358	Providing & Applying concrete hardner on C.C. road top surface etc. all comp.of work
359	Providing and filling in position rubberized bitumen hot sealing compond for sealing of expansion joints in road/pavement including groove cutting as per norms etc.all complete as per direction of Engineer-in-charge.
360	R.C.C. 1:1.5:3 in cement corse sand and stone grit. As SIN 284(A)
361	Mild steel or iron such as in plane reinforcement concrete. As S.I. No. 504
362	Deduction cost of old C.C Tiles+all comp of work
363	Deduction cost of old brick
364	Deduction cost of old brick bat
365	Supply and Fixing Sign Board at site.+all comp.of work.
366	In Ward 13, Jai Bhim Nagar slum, construction of drain and road through CC in the street from Seema Jatni's house via Shri Ram's house to Manoj Yadav's house. E/W in filling from out site 12km distance from site i/c all comp of work.
367	Concrete with 4 cm. gauge brick ballast, Fine sand of 1.25 F.M. and cement, in proportion of 8:4:1 in foundations and under floors, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.
368	M-150 brick work in 1:4 one cement and four course sand . mortar in foundation and plinth including supply of all materials labour, T & P etc required for proper complition of the work S.I No.305 a
369	12 mm thick plaster 1:4 with Cement and four course sand including supply all material and labour, T & etc. SI No.584 (A)
370	Cement Concrete with 2.0 cm. gaug;e Approved stone grid coarse sand & cement in the proportion of 4:2:1 including , T&P etc. S.I. 279 (a)
371	Cement Concrete with 4 cm gauge approved stone grit, coarse sand & cement in the proportion of 8:4:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.
372	Consinction of un-reinforced dowel jointed at expansion and constuction joint only plan cement concrete pavement thickness as per disign over a prepared sub base with 43 grade cement or any other type as per Clause 1501.2.2 (1:2:3) coarse and fine aggregates confirming to lS 383 maximum size of coarse aggegate not exceeding 25mm mixed in a concrete mixer of not less then 0.2 cum capicity and appropriate weight batcher using approvd mix design laid in approved fixed side form work (steel channal laying and fixing of 125 micron thick polythene film wedges steel plates including levelling the formwork as per drawing) sprading the concrete with shovels, rakes compacled using needle screed and plate vibrators and finished in constinous operating including provision of contraction and expansion construction joints as per norms applying debonding strips primer sealent dowel bars,near approaches to bridges /culvert and consruction ,joints admixtures , as approved curing of concrete slabs for fourteen days ,curing compound,(where specified) and water finishing to lines and grade as per drawing and technical spercification clause 1501 i/c cost of polyethene sheets and dowel bars and also including complete shifting of material and concrete etc (M-30)(wuthout dowel bars)when thickness of cc is less than 20 cm ( wuthout dowel bars) m-30
373	providing of trimix for cc road i/c hire &fuel charge of concrete floter+ all complete total area of road
374	providing & applying concrete of hardner of cc road top surface i/c all complete
375	providing and filling in posite rubberized hot sealing compound for sealing of expansion joint in road / pavement including groove cutting as per norms etc all complete
376	R.C.C. Work with cement, approved coarse sand & 2 cm gauge approved stone grit in proportions of 1:1.5:3 in slab excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire. The rate excludes making of drip course which shall be paid extra.
377	M.S. (tor steel or plain) in Plain work such as R.C.C. work including bending for proper shape and including supply of steel & its wastage, bend, hooks, and authorised overlapping shall be measured and including cost of binding wire.
378	In Ward 13, Jai Bhim Nagar slum, construction work of drain and road by CC from Akash's house to Pintu Contractor's house and from Savita Vidya Academy to Dharampal's house and in the street of Radhe Shyam and Ram Preeti. E/W in filling from out site 12km distance from site i/c all comp of work.
379	Concrete with 4 cm. gauge brick ballast, Fine sand of 1.25 F.M. and cement, in proportion of 8:4:1 in foundations and under floors, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.
380	M-150 brick work in 1:4 one cement and four course sand . mortar in foundation and plinth including supply of all materials labour, T & P etc required for proper complition of the work S.I No.305 a
381	12 mm thick plaster 1:4 with Cement and four course sand including supply all material and labour, T & etc. SI No.584 (A)
382	Cement Concrete with 2.0 cm. gaug;e Approved stone grid coarse sand & cement in the proportion of 4:2:1 including , T&P etc. S.I. 279 (a)
383	Cement Concrete with 4 cm gauge approved stone grit, coarse sand & cement in the proportion of 8:4:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.
384	Consinction of un-reinforced dowel jointed at expansion and constuction joint only plan cement concrete pavement thickness as per disign over a prepared sub base with 43 grade cement or any other type as per Clause 1501.2.2 (1:2:3) coarse and fine aggregates confirming to lS 383 maximum size of coarse aggegate not exceeding 25mm mixed in a concrete mixer of not less then 0.2 cum capicity and appropriate weight batcher using approvd mix design laid in approved fixed side form work (steel channal laying and fixing of 125 micron thick polythene film wedges steel plates including levelling the formwork as per drawing) sprading the concrete with shovels, rakes compacled using needle screed and plate vibrators and finished in constinous operating including provision of contraction and expansion construction joints as per norms applying debonding strips primer sealent dowel bars,near approaches to bridges /culvert and consruction ,joints admixtures , as approved curing of concrete slabs for fourteen days ,curing compound,(where specified) and water finishing to lines and grade as per drawing and technical spercification clause 1501 i/c cost of polyethene sheets and dowel bars and also including complete shifting of material and concrete etc (M-30)(wuthout dowel bars) when thickness of cc is less than 20 cm ( wuthout dowel bars) m-30
385	providing of trimix for cc road i/c hire &fuel charge of concrete floter+ all complete total area of road
386	providing & applying concrete of hardner of cc road top surface i/c all complete
387	providing and filling in posite rubberized hot sealing compound for sealing of expansion joint in road / pavement including groove cutting as per norms etc all complete
388	R.C.C. Work with cement, approved coarse sand & 2 cm gauge approved stone grit in proportions of 1:1.5:3 in slab excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire. The rate excludes making of drip course which shall be paid extra.
389	M.S. (tor steel or plain) in Plain work such as R.C.C. work including bending for proper shape and including supply of steel & its wastage, bend, hooks, and authorised overlapping shall be measured and including cost of binding wire.
390	Construction of drain and CC road from Neela Khokha to Raj Singh's house in Ward 13, Jai Bhim Nagar slum and in the streets of Ramkesh, Anshika Sharma and Chirag. E/W in filling from out site 12km distance from site i/c all comp of work.
391	Concrete with 4 cm. gauge brick ballast, Fine sand of 1.25 F.M. and cement, in proportion of 8:4:1 in foundations and under floors, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.
392	M-150 brick work in 1:4 one cement and four course sand . mortar in foundation and plinth including supply of all materials labour, T & P etc required for proper complition of the work S.I No.305 a
393	12 mm thick plaster 1:4 with Cement and four course sand including supply all material and labour, T & etc. SI No.584 (A)
394	Cement Concrete with 2.0 cm. gaug;e Approved stone grid coarse sand & cement in the proportion of 4:2:1 including , T&P etc. S.I. 279 (a)
395	Cement Concrete with 4 cm gauge approved stone grit, coarse sand & cement in the proportion of 8:4:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.
396	Consinction of un-reinforced dowel jointed at expansion and constuction joint only plan cement concrete pavement thickness as per disign over a prepared sub base with 43 grade cement or any other type as per Clause 1501.2.2 (1:2:3) coarse and fine aggregates confirming to lS 383 maximum size of coarse aggegate not exceeding 25mm mixed in a concrete mixer of not less then 0.2 cum capicity and appropriate weight batcher using approvd mix design laid in approved fixed side form work (steel channal laying and fixing of 125 micron thick polythene film wedges steel plates including levelling the formwork as per drawing) sprading the concrete with shovels, rakes compacled using needle screed and plate vibrators and finished in constinous operating including provision of contraction and expansion construction joints as per norms applying debonding strips primer sealent dowel bars,near approaches to bridges /culvert and consruction ,joints admixtures , as approved curing of concrete slabs for fourteen days ,curing compound,(where specified) and water finishing to lines and grade as per drawing and technical spercification clause 1501 i/c cost of polyethene sheets and dowel bars and also including complete shifting of material and concrete etc (M-30)(wuthout dowel bars) when thickness of cc is less than 20 cm ( wuthout dowel bars) m-30
397	providing of trimix for cc road i/c hire &fuel charge of concrete floter+ all complete total area of road
398	providing & applying concrete of hardner of cc road top surface i/c all complete
399	providing and filling in posite rubberized hot sealing compound for sealing of expansion joint in road / pavement including groove cutting as per norms etc all complete
400	R.C.C. Work with cement, approved coarse sand & 2 cm gauge approved stone grit in proportions of 1:1.5:3 in slab excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire. The rate excludes making of drip course which shall be paid extra.
401	M.S. (tor steel or plain) in Plain work such as R.C.C. work including bending for proper shape and including supply of steel & its wastage, bend, hooks, and authorised overlapping shall be measured and including cost of binding wire.
402	In Ward-13, Jai Bhim Nagar slum, from Bavalu's house to Arjun's house and in the lanes of Sumit Karthik and Arvind Kumar and related lanes, construction of drain and road by C.C. E/W in filling from out site 12km distance from site i/c all comp of work.
403	Concrete with 4 cm. gauge brick ballast, Fine sand of 1.25 F.M. and cement, in proportion of 8:4:1 in foundations and under floors, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.
404	M-150 brick work in 1:4 one cement and four course sand . mortar in foundation and plinth including supply of all materials labour, T & P etc required for proper complition of the work S.I No.305 a
405	12 mm thick plaster 1:4 with Cement and four course sand including supply all material and labour, T & etc. SI No.584 (A)
406	Cement Concrete with 2.0 cm. gaug;e Approved stone grid coarse sand & cement in the proportion of 4:2:1 including , T&P etc. S.I. 279 (a)
407	Cement Concrete with 4 cm gauge approved stone grit, coarse sand & cement in the proportion of 8:4:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.
408	Consinction of un-reinforced dowel jointed at expansion and constuction joint only plan cement concrete pavement thickness as per disign over a prepared sub base with 43 grade cement or any other type as per Clause 1501.2.2 (1:2:3) coarse and fine aggregates confirming to lS 383 maximum size of coarse aggegate not exceeding 25mm mixed in a concrete mixer of not less then 0.2 cum capicity and appropriate weight batcher using approvd mix design laid in approved fixed side form work (steel channal laying and fixing of 125 micron thick polythene film wedges steel plates including levelling the formwork as per drawing) sprading the concrete with shovels, rakes compacled using needle screed and plate vibrators and finished in constinous operating including provision of contraction and expansion construction joints as per norms applying debonding strips primer sealent dowel bars,near approaches to bridges /culvert and consruction ,joints admixtures , as approved curing of concrete slabs for fourteen days ,curing compound,(where specified) and water finishing to lines and grade as per drawing and technical spercification clause 1501 i/c cost of polyethene sheets and dowel bars and also including complete shifting of material and concrete etc (M-30)(wuthout dowel bars)when thickness of cc is less than 20 cm ( wuthout dowel bars) m-30
409	providing of trimix for cc road i/c hire &fuel charge of concrete floter+ all complete total area of road
410	providing & applying concrete of hardner of cc road top surface i/c all complete
411	providing and filling in posite rubberized hot sealing compound for sealing of expansion joint in road / pavement including groove cutting as per norms etc all complete
412	R.C.C. Work with cement, approved coarse sand & 2 cm gauge approved stone grit in proportions of 1:1.5:3 in slab excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire. The rate excludes making of drip course which shall be paid extra.
413	M.S. (tor steel or plain) in Plain work such as R.C.C. work including bending for proper shape and including supply of steel & its wastage, bend, hooks, and authorised overlapping shall be measured and including cost of binding wire.
414	Construction of drain and CC road in Balkishan Kannu and its adjoining lanes from Deepak Dilor's house to Sardar Factory in Ward 13, Jai Bhim Nagar slum. E/W in filling from out site 12km distance from site i/c all comp of work.
415	Concrete with 4 cm. gauge brick ballast, Fine sand of 1.25 F.M. and cement, in proportion of 8:4:1 in foundations and under floors, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.
416	M-150 brick work in 1:4 one cement and four course sand . mortar in foundation and plinth including supply of all materials labour, T & P etc required for proper complition of the work S.I No.305 a
417	12 mm thick plaster 1:4 with Cement and four course sand including supply all material and labour, T & etc. SI No.584 (A)
418	Cement Concrete with 2.0 cm. gaug;e Approved stone grid coarse sand & cement in the proportion of 4:2:1 including , T&P etc. S.I. 279 (a)
419	Cement Concrete with 4 cm gauge approved stone grit, coarse sand & cement in the proportion of 8:4:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.
420	Consinction of un-reinforced dowel jointed at expansion and constuction joint only plan cement concrete pavement thickness as per disign over a prepared sub base with 43 grade cement or any other type as per Clause 1501.2.2 (1:2:3) coarse and fine aggregates confirming to lS 383 maximum size of coarse aggegate not exceeding 25mm mixed in a concrete mixer of not less then 0.2 cum capicity and appropriate weight batcher using approvd mix design laid in approved fixed side form work (steel channal laying and fixing of 125 micron thick polythene film wedges steel plates including levelling the formwork as per drawing) sprading the concrete with shovels, rakes compacled using needle screed and plate vibrators and finished in constinous operating including provision of contraction and expansion construction joints as per norms applying debonding strips primer sealent dowel bars,near approaches to bridges /culvert and consruction ,joints admixtures , as approved curing of concrete slabs for fourteen days ,curing compound,(where specified) and water finishing to lines and grade as per drawing and technical spercification clause 1501 i/c cost of polyethene sheets and dowel bars and also including complete shifting of material and concrete etc (M-30)(wuthout dowel bars) when thickness of cc is less than 20 cm ( wuthout dowel bars) m-30
421	providing of trimix for cc road i/c hire &fuel charge of concrete floter+ all complete
422	providing & applying concrete of hardner of cc road top surface i/c all complete
423	providing and filling in posite rubberized hot sealing compound for sealing of expansion joint in road / pavement including groove cutting as per norms etc all complete
424	R.C.C. Work with cement, approved coarse sand & 2 cm gauge approved stone grit in proportions of 1:1.5:3 in slab excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire. The rate excludes making of drip course which shall be paid extra.
425	M.S. (tor steel or plain) in Plain work such as R.C.C. work including bending for proper shape and including supply of steel & its wastage, bend, hooks, and authorised overlapping shall be measured and including cost of binding wire.
426	Construction of drain and CC road from Kishan Pal's house to Karan Singh's house and in Shiv Mandir lane in Ward 13, Jai Bhim Nagar slum. E/W in filling from out site 12km distance from site i/c all comp of work.
427	Concrete with 4 cm. gauge brick ballast, Fine sand of 1.25 F.M. and cement, in proportion of 8:4:1 in foundations and under floors, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.
428	M-150 brick work in 1:4 one cement and four course sand . mortar in foundation and plinth including supply of all materials labour, T & P etc required for proper complition of the work S.I No.305 a
429	12 mm thick plaster 1:4 with Cement and four course sand including supply all material and labour, T & etc. SI No.584 (A)
430	Cement Concrete with 2.0 cm. gaug;e Approved stone grid coarse sand & cement in the proportion of 4:2:1 including , T&P etc. S.I. 279 (a)
431	Cement Concrete with 4 cm gauge approved stone grit, coarse sand & cement in the proportion of 8:4:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.
432	Consinction of un-reinforced dowel jointed at expansion and constuction joint only plan cement concrete pavement thickness as per disign over a prepared sub base with 43 grade cement or any other type as per Clause 1501.2.2 (1:2:3) coarse and fine aggregates confirming to lS 383 maximum size of coarse aggegate not exceeding 25mm mixed in a concrete mixer of not less then 0.2 cum capicity and appropriate weight batcher using approvd mix design laid in approved fixed side form work (steel channal laying and fixing of 125 micron thick polythene film wedges steel plates including levelling the formwork as per drawing) sprading the concrete with shovels, rakes compacled using needle screed and plate vibrators and finished in constinous operating including provision of contraction and expansion construction joints as per norms applying debonding strips primer sealent dowel bars,near approaches to bridges /culvert and consruction ,joints admixtures , as approved curing of concrete slabs for fourteen days ,curing compound,(where specified) and water finishing to lines and grade as per drawing and technical spercification clause 1501 i/c cost of polyethene sheets and dowel bars and also including complete shifting of material and concrete etc (M-30)(wuthout dowel bars) when thickness of cc is less than 20 cm ( wuthout dowel bars) m-30
433	providing of trimix for cc road i/c hire &fuel charge of concrete floter+ all complete total area of road
434	providing & applying concrete of hardner of cc road top surface i/c all complete
435	providing and filling in posite rubberized hot sealing compound for sealing of expansion joint in road / pavement including groove cutting as per norms etc all complete
436	R.C.C. Work with cement, approved coarse sand & 2 cm gauge approved stone grit in proportions of 1:1.5:3 in slab excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire. The rate excludes making of drip course which shall be paid extra.
437	M.S. (tor steel or plain) in Plain work such as R.C.C. work including bending for proper shape and including supply of steel & its wastage, bend, hooks, and authorised overlapping shall be measured and including cost of binding wire.
438	Less labour cess 1 % of (Rs 57901136)
439	Less 5 % for stenderd deduction of (Rs 57322124.64) Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Uttar Pradesh Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Integrated Development Work Of Jaibhim Nagar And Kas Ur Slums In Municipal Corporation Meerut Under State Smart City Scheme. (Road Construction, Park Construction, Community Centre, Community Toilet, Library And Street Lighting Work),, Meerut-Uttar Pradesh

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Integrated Development Work Of Jaibhim Nagar And Kas Ur Slums In Municipal Corporation Meerut Under State Smart City Scheme. (Road Construction, Park Construction, Community Centre, Community Toilet, Library And Street Lighting Work),, Meerut-Uttar Pradesh

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us