|
| 1 | Laying and Jointing PVC Pipe. Heading |
| 2 | Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete.Page No-223, SSR Item No.-25.50 |
| 3 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber,applying and brooming requisite type of screening / binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density.By Mechanical Means-Grading I (Using Screening Type B (11.2 mm) Aggregate). Page No-29, SSR Item No.-3.19 |
| 4 | Providing and laying Cast in situ / Ready Mix cement concrete in M15 of trap / granite / quartzite / gneiss metal for bed blocks, foundation blocks and such otheri tems including bailing out water, Steel centering, formwork, laying / pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honey combed surface and curing etc. complete. The Cement Mortar 1:3p laster is considered for rendering un even and honey combed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro process or based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc.complete.Withfine aggregate (Crushed sand VSI Grade). Page-176, SSR Item No.-24.08 |
| 5 | Providing and laying in-situ M30 Grade unreinforced plain cement concrete pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate( natural sand/ VSI grade finely washed crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a batching and mixing plant/ non tilting mixer and Weigh batcher as per approved mix design, admixtures, transporting to site, spreading, laying with approved make paver,compacted and finished in a continuous operation, finishing to lines and grades as directed by Engineer-in-charge.Page-44, SSR Item No.-5.01. |
| 6 | Cutting transverse contraction joints 3 to 4mm wide and depth 60mm. in concrete slab using concrete cutting machine with diamond studded saw within 48hours of casting of bay/slab etc. complete including subsequent widening of the groove 8 to 10mm. wide at top having depth of 15 mm. as directed by Engineer incharge.. Page No-43, SSR Item No.-5.17 |
| 7 | Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm. Page No-60, SSR Item No.-6.36 |
| 8 | Supplying installing.testing and commissioning solar LED mini Hi-Mast 20 W x 5 nos.LED Lumiaries. 2 nos x 150 All 12 V lithium battery, min 400 Wp SPV modules, mounted on Gl octagonal pole with bottom of 130mm A/F, TOP 70mm A/F 6 mtr height along with brackets, foundation, earthing and neessary accessories, water proof battery box, suitable solar inverter, timer setting arrangement, Gl/powder coated module structure, with first 6hr.full intensity light output and following 6hr. with half intensity light output along with solar and local electrical power supply charging facility complete.(with 5 years warrantee.)4-3-14. (PWD CSR 2020-21) |
| 9 | Making M-20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5m depth including supply of steel, concrete, excavation and lixing provided nut bolts with the help of template duly plastered as per design complte (for 6m to 8m high octagonal/conical gi pole).16-3-9.(PWD CSR 2022-23) |
| 10 | Supplying, installing, testing and commissioning solar street light pole comprising of 12W x 2 nos, LED fittings, 12V min. 100Ah maintenance free lithium battery, min. 120Wp SPV module, MS powder coated battery box weather proof, mounted on 75/80 mm dia. B-Grade Gl pole of 6 m height along with brackets, foundation, carthing and necessary accessories Specification no. ESD -SOL-STL. complete. (with 5 years warrantee). 4-3-13.(PWD CSR 2020-21) |
| 11 | Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose).16-3-7.(PWD CSR 2022-23) |
| 12 | TEST ON CONCRETE, Compressive Strength (3 set of cubes) |
| 13 | ROYALTY CHARGES, a) For sand |
| 14 | ROYALTY CHARGES, b) For All Other Minerals |
| 15 | GST 18 % |
| 16 | ADD 5% CONTENGIENCES INSURANCE |
| 17 | Add 1% for labour insurance Please Enable Macros to View BoQ information |
