|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : Garrison Engineer Kapurthala Name of Work : Periodical services for OTM Accn and Md Accn at zone A and zone B at Kapurthala under GE Kapurthala. Contract No : GE KPT- /2026-27 Bidder Name : SCHEDULE OF WORKS(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # S.No Description of work Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | M&L for preparation of old decorated surfaces of walls and cornics by complete removeal of existing treatment by applying water and scrapping of entire thickness of exsting treatment with using steel scraper complete all as specified and directed by Engr-in-Charge. |
| 3 | M&L for applying 3mm wall care putty to wall surfaces to achieve smooth finish complete all as specified and directed by Engr-in-charge. |
| 4 | M&L for applying two coats of oil bound distemper on walls complete all as specified and directed by Engr-in-charge. |
| 5 | M&L for applying one coat of oil bound distemper on walls complete all as specified and directed by Engr-in-Charge. |
| 6 | M&L for preparation of old wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge |
| 7 | M&L for preparation of old steel surfaces of any description over 10cm girth or width no otherwise described and applying two coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge. |
| 8 | M&L for preparation of old decorated surfaces of walls or cornics by complete removeal of existing treatment by applying water and scrapping of entire thickness of exsting treatment with using steel scraper and thereafter applying two coat of exterior emuslion paint/weather proof paint complete all as specified and directed by Engr-in-Charge. Note- Exterior emulsion paint to be done by Roller. |
| 9 | M&L for applying two coats of cement based paint on walls complete all as spedifed and directed by Engr-in-Charge.Note- cement based paint to be done by spray machine. |
| 10 | M&L for applying two coats of white wash complete all as specified and directed by Engr-in-charge |
| 11 | M&L for preparation of old plastered surfaces of ceiling washing rubbing down and stopping of distemepered or painted surfaces and applying one coat of oil bound distermper complete all as specified and directed by Engr-in-Charge. Note- OBD to be done by Roller. |
| 12 | M&L for cleaning the surface and made free of vegetation, dirt, foreign particles, liatance all as specified and directed. |
| 13 | M&L rendering 10mm thick on brick or concrete surface in cement mortar 1:3 with water proofing compound finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge Note- Water proofing compund to be measured and paid seprately. |
| 14 | Supply and apply high build elastomeric waterproofing coated based on pure hydrophobic polyurethane cold applied or spray, brush applied, membrane with an elongation of 280 % and tensile strength of 2.7N/mm2 as per ASTMD 2370, crack bridging ability of 3mm, no leakage upto 5 bars of water pressure, minimum 88% solid content. The system includes final base preparation, epoxy primer application with 100% water dilution and pure polyurethane application in two coats with minimum consumption of 1.2 kg/sqm complete all as specified and directed by Eng-In-Charge. |
| 15 | Taking down cement plaster on brick or stone wall etc; including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed by Engr-in-Charge |
| 16 | M&L for rendering 15mm thick on brick wall or concrete surface in cement mortar 1:4 with water proofing compound finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge |
| 17 | Demolition of brick/ block masonry built in cement mortar including all quoins, arches, pillars etc and clearing off the premises complete all as specified and directed by Engr-in-Charge |
| 18 | M&L for brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge. |
| 19 | Use and waste of formwork to chajjas and similar items including edges rough finished complete all as specified and directed. |
| 20 | M&L for dugging out average 10mm thick on distubed chajja beam, slab portion, parapet and applying chicken wire mesh over disturbed portion fixed with drilling, bolting etc after anti corrosion treatement of steel bar and finally finished with 10mm thick (1:3) cement plaster mixed with WPC @3% by the weight of cement all as specified and directed by Eng-in-Charge.Note:- (a) The bars which are corroded badly needs to be strengthen by placing new bars by means of proper splicing and will be measured and paid seprately under appropriate item.(b) RCC 1:2:4 type B-0 to be measured and paid seprately(c) The rate of item includes necessary shuttering, scaffholding, staging etc all as specified and directed by Eng-in-Charge. |
| 21 | M&L for TMT bars 10mm dia and over cut to length bent to shape required, including cranking, bending hooking etc and binding with mild steel binding steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by Engr-in-Charge |
| 22 | M&L for RCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in chajjas etc. complete all as specified and directed by Engineer-in-charge. |
| 23 | M&L for rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge |
| 24 | Supply only integral water proofing compound. |
| 25 | M&L for rendering 5mm thick in cement mortar (1:3) on ceiling surfaces, finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge |
| 26 | M&L for preparation of plastered and unplastered surfaces and applying two coats of oil bound distermper on undecorated or newley plastered surfaces of ceiling complete all as specified and directed by Engr-in-Charge. |
| 27 | M&L for preparation of plastered and unplastered surfaces of wall and applying two coats of oil bound distemper over 3mm wall care putty complete all as spedifed and directed by Engr-in-Charge. Note- OBD to be done by Roller. |
| 28 | M&L for preparation of plastered and unplastered surfaces of wall and applying two coats of exterior emulsion/ weather proof paint complete all as specified and directed by Engr-in-charge. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
