|
| 1 | Demolition of cement concrete (unreinforced ) in ground floor and paving n.exc 15 cm thickness below or above ground level)complete all as specified and as directed. |
| 2 | Demolition of Brickwork of stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articlesl etc complete. |
| 3 | M&L brick work with fly ash bricks (FASB) conferming to IS 12894, of strength M-10 straight or curved on plan exc 6m mean radious built cement mortar 1:4 complete (on parapet wall) all as specified and as directed. |
| 4 | Demolition of RCC water storage tank of size exc. 600x1200x1000 mm but n.exc 1200x1600x1500mm on roof, floor, staging complete and the scrap should be removing to distance of 50m where directed by EIC. |
| 5 | Demolition of cement concrete (reinforcement cut as facilitate demolition) in any description and in any position not other wise specifically provided for complete all as specified at site. |
| 6 | Taking down cement plaster on brick or stone walls etc incl racking out joints hacking for key and scrabbing down with water etc complete all as specified and as directed. |
| 7 | Taking down 15 mm bore steel tubing and connection including cleaning and refixing or removal to store etc complete all as specified and as directed. |
| 8 | Taking down 20 mm bore steel tubing and connection including cleaning and refixing or removal to store etc complete all as specified and as directed. |
| 9 | Taking up or down existing 25 mm dia bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed. |
| 10 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cuttingexceeding 10 cm but not exceeding 20 cm girth in brick walls complete all as specified and directed |
| 11 | S&F 15 mm dia CPVC pipes SDR 11 with all plain CPVC SDR 11 fittings & fixed complete to walls & ceiling or laid in trenches/floors etc complete all as specified and directed by EIC. |
| 12 | S&F 20 mm dia CPVC pipes SDR 11 with all plain CPVC SDR 11 fittings & fixed complete to walls & ceiling or laid in trenches/floors etc complete all as specified and directed by EIC. |
| 13 | Fixing only 20 mm bore galvanised mild steel tubing of medium grade with all fittings & fixed complete to walls & ceiling or laid in trenches/floors etc complete all as specified and as directed. |
| 14 | S & F, jointing and testing 25 mm dia bore galvanised iron tubing medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed |
| 15 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each complete all as specified and as directed.Note: Including cutting of hole as required at site for taking down and making good of distrubed portion with brick work of CM 1:6 or PCC 1:2:4 as directed. |
| 16 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exe 1.5 Sqm but n exc 4 Sqm each etc complete all as specified and as directedNote: Including cutting of hole as required at site for taking down and making good of distrubed portion with brick work of CM 1:6 or PCC 1:2:4 as directed. |
| 17 | Taking down shutters of any description nexc 1 sq.m each removal to store complete all as specified and as directed. |
| 18 | Dismantling/demolition of existing water tanks of steel /PVC/RCC of capacity exceeding 250 liters but not exceeding 500 litres complete all as specified and as directed. |
| 19 | M & L for complete removal of existing treament on ceiling and applying two coat of white wash all as specified and as directed. |
| 20 | M & L for Complete removal of existing treament of wall by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit and applying two coat of oil emulsion distemper on walls with roller including 2 mm thick in two layer wall care putty complete all as specified and as directed. |
| 21 | M & L for complete removal of existing treatment on old surface of wall by scrubing with hard wire brush, washing down with water and applying two coats of weather proof exterior acrylic emulsion paint of approved make and approved by GE over one coat of primer from the same manufacturer complete all as speified and directed by EIC. |
| 22 | M&L for rendering 15mm thick on internal surfaces of brick work or concrete surfaces CM 1:6, and finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 23 | M&L renderig 15mm thick in cement mortar 1:4 over other than fair faces of of brick or concrete surface of wall rendering is to be finished even and smooth without using extra cement complete all as specified and as directed. |
| 24 | M&L renderig 5 mm thick in cement mortar 1:4 on ceiling surface and finished even and smooth with out using extra cement complete all as specified and as directed. |
| 25 | M & L for preparation of new plastered surface and applying two coat of oil bound distemper including 2 mm thick in two layer wall care putty over a primer coat with roller on walls omplete all as specified and as directed. |
| 26 | M & L for preparation of new surface of wall and applying two coats of weather proof exterior acrylic emulsion paint of approved make and approved by GE over one coat of primer from the same manufacturer complete all as speified and directed by EIC. |
| 27 | M & L for preparation of new plastered surface and applying three coat of white wash on ceiling complete all as specified and as directed. |
| 28 | Dismantling of stone slab and tiles of any description or thickness laid bedded and pointed in any mortar in floor,wall, aprons etc complete all as specified and directed. |
| 29 | M&L for non skid Coloured joint free ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.18 sqm but not exc 0.38 sqm, in floors & Skerting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor etc including 15 mm screed bed with CM(1:6) complete all as specified and as directed. |
| 30 | M&L for non-skid coloured joint free ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in floor etc. set and jointed in neat cement slurry and pointed in colour cement to match to floor, over and incl 10mm thick rendering on wall or conc surfaces in cement mortar 1:4 ,complete all as specified and as directed. |
| 31 | M&L for glazed coloured ceramic tiles 300x600x7 mm thick for work on vertical surface such as skirting, dado, set & jointed in cement slurry and pointed in white or coloured cement to match the existing wall surfaces, over and incl 10mm thick rendering in cement mortar 1:4 etc complete all as specified and as directed. |
| 32 | Demolition and breaking up drain pipes (Salt glazed ware, AC/PVC/CI or Reinforced concrete) set in cement mortar in floors or wall in 100mm dia meter complete all as specified and directed |
| 33 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall with clamp out of 25x3mm flate Iron including bolts and nuts 110mm bore complete all as specified and directed |
| 34 | S &F of 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed |
| 35 | S &F of 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors / wall complete all as specified and directed |
| 36 | S&F PVC (SWR) bends any radius 110mm bore complete all as specified and directed |
| 37 | S&F PVC (SWR) bends any radius 75mm bore complete all as specified and directed |
| 38 | S&F PVC (SWR) junction single, (single T) equal or unequal 75mm bore with access door complete all as specified and directed. |
| 39 | S&F PVC (SWR) junction single, (single T) equal or unequal 110mm bore with access door complete all as specified and as directed. |
| 40 | S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed |
| 41 | S&F in repair PVC floor trap/Nahani trap outlet dia 75mm with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed |
| 42 | M&L for 16-18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone including cutting and polishing types over 15 mm thick in CM(1:6) etc complete all as specified and as directed. |
| 43 | Rounding to edges of stone slabs one edge, such as in stair steps, cooking platform, and other similar situations etc complete all as specified and as directed. |
| 44 | M&L for machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, over and including 20 mm thick screed bed or bedding layer in cementy mortar 1:4, etc complete all as specified and as directed. |
| 45 | M&L for machine cut kota stone slab 18-20mm thick, in riser of steps, skirting, dado and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete,incl 10mm thick rendering on wall or conc surfaces in cement mortar 1:4 ,complete all as specified and as directed. |
| 46 | S&F in repair sinks made of stainless steel 1mm thick in kitchen or laboratory with drainage board with plug washers and waste pipe including bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe over all size 915mm x 460mm bowl size 410mm x 330 mm x 160mm. and to be fixed with granite or surface with proper gradient for wash out of water all as specified and directed. |
| 47 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail,paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as directed and specified by Engineer-in-Charge. |
| 48 | S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube etc complete all as specified and as directed. |
| 49 | S&F Pressed steel frames 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed |
| 50 | S&F Pressed steel frames 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed. |
| 51 | S&F, 35 mm thick Flush shutters, factory made, solid core construction, with block board core and plywood face panels, with decorative face veneers on both faces with lipping to match complete all as specified and directed. |
| 52 | S & F factory made 35 mm thick IInd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter as specified in SSR Pt I sec 8 Cl 8.20 (a), divided into squares with plain chamfered rounded, mitered and rebated sash bars etc complete all as specified and as directed. |
| 53 | S & F SS butt hinges medium weight and fixed 100 mm size etc complete all as specified and as directed. |
| 54 | S & F SS butt hinges medium weight and fixed 75 mm size etc complete all as specified and as directed. |
| 55 | S&F but hinges extruded aluminium alloy with galvanised mild steel hing pin, anodised and fixed, type C-21 100 mm size in toilet with PVC doors etc complete all as specified and as directed. |
| 56 | S&F aluminium anodised barrel tower bolts of extruded section (ISI marked) and fixed fixed 200 mm long etc complete all as specified and as directed. |
| 57 | S&F aluminum handles cast type anodized (ISI marked) 150 mm size etc complete all as specified and as directed. |
| 58 | S&F mild steel, 300 mm ordinary door spring including roller and roller plate etc complete all as specified and as directed. |
| 59 | S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) (ISI marked) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy complete all as specified and as directed. |
| 60 | S&F,150mm floor door stopper aluminium alloy body complete all as specified and directed. |
| 61 | M&L two coat synthetic enamel paint over one coat of pink primer on new wooden surface of any description not otherwise described over 10 cm width or girth etc complete all as specified and as directed |
| 62 | M&L two coat synthetic enamel paint over one coat of red oxide primer on new or old steel surface of any description not otherwise described over 10 cm width or girth etc complete all as specified and as directed. |
| 63 | S&F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and avg width of aperture 1.18 mm fixed with tinned tacks or galvanized wire staples etc complete all as specified and as directed. |
| 64 | S&F 18 mm thick WPC board of prelaminated both face with decorative colour fixed with screws, solvent cement/adhesive to make kitchen cabinet /shutters incl taking down old wooden partical boards complete all as per specifications and as directed by the Engr-in-Charge |
| 65 | S&F Continuous (piano) hinges, mild steel bright finish electrogalvanised 20mm width of flap etc complete all as specified and as directed. |
| 66 | S&F Hasp & staple safety type aluminium anodized with mild steel hing pin incl bolt to hing plate and fixed with screws 100mm size etc complete all as specified and as directed. |
| 67 | S&F auto closing hinges 35mm of 0 crank (KH-001) OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete all as specified. |
| 68 | S&F stainless steel handles 100mm size for kitchen cabinet shutters complete all as specified and as directed. |
| 69 | M&L for Hardcore of broken stone or boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 70 | M&L for 75mm thick cement concrete type C-2 1:3:6 (using 20 mm graded stone aggregate) as in plinth protection finished surface even and smooth without using extra cement complete all as specified and as directed. |
| 71 | M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in filling & mass concrete in floor and sunken portion complete all as specified and as directed by Engineer -in-charge. |
| 72 | M&L for machine pressed precast concrete interlocking paver block colour glossy finishes any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade and fixed with grey cement and pigment over and including 50 mm thick sand cussion complete all as specified and directed. |
| 73 | M&L for cement concrete type B-1 ,1:2:4 (20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed |
| 74 | Demolition of existing roof treatment in any description and in any position etc complete all as specified at site with APP/PCC and 10mm thick backing coat below APP and all other as specified and directed by engineer in charge . |
| 75 | Removal of excavated materials to a distance exc 500 m and depositing where directed at a level n exc 25cm above starting point complete all as specified and as directed. |
| 76 | Cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed. |
| 77 | M&L for plain cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in copping or roof kerbs on roof chamfered on edge including troweling slightly complete all as specified and as directed. |
| 78 | M&L 10 mm thick rendering in cement mortar 1:4 on concrete surfaces when concrete is still green finished even and fair including mixing of water proofing compound as per manufacturer instruction etc complete all as specified and as directed. Note :- Water proofing compound shall be measured separately as supply only |
| 79 | Supply only integral water proofing compound complete all as specified and as directed. |
| 80 | M&L applying water proofing treatment with the following-(a) First coat of bitumen primer conforming to IS-3384 @ 0.3Kg / sqm to be applied on prepared surface till the surface is properly impregnated.(b) after the application of approved bituminous primer the water proofing memberne minimum weight 3kg/sqm and minimum 3mm thick reinforced with polyesterd non woven fabric (weight not less then 150gms/sqm) shall be laid on the primed surface by torch application method as per manufactured instruction.(c) All joints and change in direction should be curved with cement mortar (1:3) mixed with SBR latex @ 200ml per bag on cement and cured well before laying of membrane. |
| 81 | M&L Cement concrete tiles 25cm x 25cm x 20-22mm thick, machine pressed; set jointed and pointed in neat with grey cement and no pigment slurry in floors, and cut and polishedand shall be laid over 15 mm thick cement mortar screed in 1:4 and joints between the tiles to be filled with chemical like Tile grout or equilent complete all as specified and directed. |
| 82 | S & F 1000 litre capacity of rotational moulded polyethylene water storage tank multilayered construction, ISI marked of make specified (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings complete all as specified in SSR Part-I complete all as specified and as directed. |
| 83 | S & F in repair 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. |
| 84 | S&F in repair 20 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. .(Minimum weight 15mm-142gms/ 20mm-210 gms./25mm-455gms/ 40mm etc complete all as specified and as directed. |
| 85 | S&F figured glass ,pin head type 3 mm thick and glazing with oil putty in square n.exc 0.5sqm in each pane complete all as specified and as directed. |
| 86 | S&F Powder coated aluminium sliding windows with fly proof shutters having top rail of section 41mmx20mmx1.6mm thick, bottom rail of section 41x20x1.6mm thick ,vertical style of section 38x20x1.6mm thick including necessery jointing cleats ,glazing clips, rubber packing ,snap beading, screws handle and locking system etc, fitted including usingg standard aluminium section including necessery fittings and fixtures complete all as specified and directed. |
| 87 | S&F Powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 88 | Cutting holes Not exc. half brick in brick walls in mud mortar for inserting MS angle/holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required ®directed by engineer in charge . |
| 89 | S&F MS framed work as air cooler stand/ in doors or gates of angle or other section with gusset plates, rails,braces,etc.,complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete of Fe-410-W (Gde-E-250) complete all as specified and as directed. |
| 90 | S&F Sheet glass 4.8 mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 91 | S&F Anodised aluminium ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified |
| 92 | M&L for PCC (1:5:10) type E2 using 40 mm graded stone aggregate as in filling and mass concrete complete all as directed and as specified. |
| 93 | M&L for PCC 1:2:4 type B0 12.5 mm stone aggregate of avg 25 mm thick make to slope in sunken floors complete all as specified and as directed. |
| 94 | M&L for rendering 15mm thick in cement mortar 1:3 mixed with water proofing compound as per manufacturer instructions surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note :- WPC shall be measured and paid seprately) |
| 95 | M&L for two or more coat of Epoxy (Hardener and raiser ) coating over primer over new prepared wall /floor surfaces in sunken floor complete testing through ponding , all as directed and as specified by Engr-in-charge . |
| 96 | S&F Stainless steel curtain rod 25mm dia grading H-304 with fancy knob type ends and brackets complete all as specified and as directed by the Engineer-in-charge. |
| 97 | S&F in repairs vitreous china squatting pan 'ORISSA PATTERN ' size 580mm x 440mm 'white with integral foot rest (excluding flushing cistern and flush pipe ) with 'P' or 'S' trap, front or back inlet including connection to trap and to flushing pipe anti syphonage pipe etc complete all as specified and as directed |
| 98 | S & F Vitreous China Ware Wash hand basin white, flat back, size 450 x 300 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand and waste pipe complete all as specified and as directed. |
| 99 | Suppy only 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 100 | S&F in repairs 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including breacket with 32mm dia PVC pipe 600mm long complete all as specified and directed |
| 101 | S&F PVC connection 15mm dia with Brass nuts of length 450mm etc complete all as specified and as directed. |
| 102 | S&F brass CP mixer 15mm dia bore mixing hot & cold water forscrewed down for iron pipe and fixed complete all as specified. |
| 103 | S&F in repair 15 mm bore angle cock long thread fancy type chromium plated cast copper alloy, screwed down high pressure with crutch or butter fly handle screwed both and for iron pipe or for union and fixed etc complete all as specified and as directed. |
| 104 | S&F in repair 15 mm bore stop cock long thread (concealed type) fancy type chromium plated cast copper alloy, screwed down high pressure with crutch or butter fly handle screwed both and for iron pipe or for union and fixed etc complete all as specified and as directed. |
| 105 | S&F in repair 125 mm Brass chromium plated shower rose with or without swivel joints, any size, including fixing of steel pipe or union.complete all as specified and as directed. |
| 106 | S&F CP Brass soap dish fixed to wall with cp brass screws etc complete all as specified and as directed by the Engineer-in-Charge. |
| 107 | S&F 15mm bore Wash basin mixer, cast copper alloy, with capstan heads,chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. |
| 108 | S&F in repair 15 mm bore bib taps long body chromium plated fancy type, cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe or for unions and fixed 15 mm bore etc complete all as specified and as directed. |
| 109 | S&F 600mm CP towel rail \\"D\\" type fixed to wall with CP brass screws complete all as specified and as directed. |
| 110 | Supply and fixing 250-300mm size corner glass shelf with bracket fixed with screws and thickness of glass 8-10mm complete all as specified and as directed by Engineer-in-Charge. |
| 111 | S&F for wall mounted stainless steel Kitchen plate rack (utensils) over all size 750 x 900 X 250mm made with 0.63mm thick SS sheet including necessary stainless steel nuts and bolts complete all as specified and directed. |
| 112 | S&F SS chromium plated peg set of five fixing with wall complete all as specified and directed |
| 113 | M& L Providing precast RCC Cover Slab, 1:2:4 type B 1 using 20 mm graded stone aggregate as in manhole cover slabs including necessary form work etc. set in CM 1:6 complete all as specified and as directed. Note :- reinforcement shall be measured and paid separately. |
| 114 | S&F for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete, all specified and directed. |
| 115 | Demolition and breaking 150mm dia drain pipe (salt glazed stoneware) set in cement mortar including packing under and haunching against side of pipe complete all as specified and as directed. |
| 116 | M&L for 150mm bore reinforcement concrete pipes, class NP-3 laid and laid jointed complete with collers complete all as specified and as directed. |
| 117 | Concrete bed to drain pipes 150mm including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:4:8 complete all as specified and directed |
| 118 | M and L for repairing of RCC projection, chajja, facia, column etc by necessary preparation (i.e. scraping, cutting, chiseling, dusting and cleaning exposed reinforcement surface of damaged/ loose surface and applying one coat of cement slurry and filling the surface with plain cement concrete (1:1.5:3) reinforced with welded mesh and make good by15mm thick plaster with cm (1:4) and including scaffolding/formwork etc upto double storey height complete all as specified and directed by engineer in charge. |
| 119 | Taking down carefully copper/ aluminium point wiring (light, fan, socket, or power) complete fitting such as switches, ceiling roses pendants, regulators, sockets, light fitting ceiling fan etc to be measured seperately ) removing materials for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperatly) and making good disturbed surface of walls floors etc all as specified and directed. Note-Responsibility after taking down fan/exhaust fan keep in safe custody of contractor and refix the same after before completion of work the rate of same deemed to be included in the item quoated rate. |
| 120 | Taking down carefully existing wooden board , Main switch, MCB DB boxes with MCBs, sheet metal boxes, cut out, etc of any size any capacity from boards complete all as specified and as directed. |
| 121 | Taking down carefully sub main wiring / service connection twin core from wall / LT pole of any size of Aluminum with wooden batten and or through rigid conduit including GI wire and making good the disturbed surfaces of walls, roofs, floors etc complete all as specified and as directed. |
| 122 | M & L for concealed point wiring One light point controlled by one switch complete with PVC insulated and unsheathed flame retardant low smoke and halogen ( FRLSH ) cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 20 mm dia, clip, with MS terminal boxes (not less than 1.6 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including common earth dolly with 3 mm thick plastic laminated sheet top cover of approved make and colour including 1.5 sqmm green multi stranded copper conductor as continuous earth wire with lugs complete including cutting necessary chases on wall / ceiling surfaces for drawing of conduit & cables as required and making good disturbed surfaces of walls with CM 1:3:6 and matching with the existing surfaces including colour washing all as specified and as directed. |
| 123 | Ditto all as per item No 122 above but one exhaust fan controlled by one switch and regulator. |
| 124 | Ditto all as per item No 122 above but 5 Amp socket outlet point controlled by one switch on independent board. |
| 125 | Ditto all as per item No 122 above but 5 Amp socket outlet point controlled by one switch on same board. |
| 126 | Ditto all as per item No 122 above but bell buzzer point controlled by one switch |
| 127 | Ditto all as per item No 122 above but one light point controlled by 2-way switchs with cable1.5Sqmm. |
| 128 | S&F modular socket 20Amps with MCB 20Amp 'C' type complete all as specified and as directed.(for geyser & AC) |
| 129 | Description all as per item No 122 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed flame retardant low smoke ( FRLS ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with 2.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed. |
| 130 | S&F switch piano flush button type 5 Amp single pole two way conforming to IS-3854-1987 complete all as specified and as directed. |
| 131 | S&F switch piano flush button type 5 Amp single pole one way complete all as specified and as directed. |
| 132 | S&F socket outlet 2 in 1, 3 pin, 5 Amp flush type complete all as specified and as directed. |
| 133 | S&F switch piano flush button type 16/20 Amp single pole one way complete all as specified and as directed. |
| 134 | S&F socket outlet 2 in1, 3 pin, 5 Amp and 15 Amp flush type complete all as specified and as directed. |
| 135 | S & F delux Fan Regulator electronic rotary, step type 240 Volt 50 Hz, complete all as specified as directed. |
| 136 | S & F Lamp holder,PVC/Urea type with back plate suitable for batten fittings complete all as specified as directed |
| 137 | S & F 9W/10W LED retrofit lamp B-22 holder base with polycorbonate body and aluminium heat sink complete all as specified as directed. Make C&S Cat No LTHPLEDLAMP7W/B22 or equivalent make as specified in Appndx 'B' to PS . |
| 138 | S&F sheet metal enclosure double door concealed suitable for distribution boards when MCBs to be used having 100 Amp rated bus bar SPN DB 8 ways 240 V complete all as specified and as directed . |
| 139 | S&F ceiling rose,surface polycarbonate 63 x50mm three terminals complete all as specified and as directed. |
| 140 | S&F ceiling rose,surface polycarbonate 63 x50mm three terminals complete all as specified and as directed. |
