|
| 1 | Removing existing water proofing treatment by brushing with wire brush, taking down cement concrete tile, existing plaster/cement concrete/lime coba etc in any thickness, cleaning of all foreign material such as fungus, moss, dust etc and remove from the site of all waste materials, roughing surface of corner to roof by wire brush and all the open cracks/honeycomb should repair properly with site made polymer mortar (cement: sand: 1:4) admixed with HS Latex Plus @10% by weight of cement. complete all as specified and directed. |
| 2 | M&L for 10 mm thick rendering in cement mortar 1:4 on concrete surfaces when concrete is stil green finished even and fair including mixing of water proofing compound as per manufacturer instruction etc complete all as specified and as directed.Note :- Water proofing compound shall be measured separately |
| 3 | Supply only integral water proofing compound complete all as specified and as directed. |
| 4 | Providing and applying two coats of HS Elastoseal BTD a waterbased, single component, UV resistant elastomeric PU liquid membrane in white / terracotta / green colour. better UV resistance, we recommend use of white colour BTD, having SRI Index > 109, having solid content 80%, Elongation 400%, Tensile 2MPa, with the help of brush/Roller with the coverage of 2Kg/Sqm over a primer coat of Elastoseal BTD : Water (1:1) to achieve DFT of 1.5mm, Sandwich 40GSM fibre-mesh in between two coats etc. complete as per manufacturer recommendations complete all as specified and directed. |
| 5 | Note:(a) The work under item 1 to 4 shall be carried out by the authorized applicator of Manufacturer by using modern techniques. The contractor shall also furnish warranty of quality, finish work and effectiveness of waterproofing treatment under this item for a period of of 8 years from the date of completion along with manufacturer warranty of material for the same period. (b) Height of bldg may be more than 5 meters and roof have continous series of trapizium with no staircase to reach at the top of the building (c) The contractor shall have MOU with any one of manufacturer and also with their authorised applicator mentioned in the tender. Authorised applicator shall have valid authorisation letter from the manufacturer (Minimum regional HQs) and shall have been issued not less than 30 days from the date of commencement of the work. The authorisation letter needs to be valid for the complete period of execution work.(d) After preparation of the surface, Engr-in-Charge shall approve the same before applying finishing coats.(e) Building wise stage passing register shall be maintained and shall be signed by Engr-in-Charge and contractor.(f) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into.(g) Contractor shall submit approved company generated 8 years warranty card at the time of submission of Final Bill. |
| 6 | Cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed. |
| 7 | M & L Plain cement concrete (1:2:4) type B0 using 12.5 mm graded stone agg as in coping or roof kerbs on roof chamfered on edge including troweling slightly complete all as specified and directed. |
| 8 | Dismantling floor, hearth or wall tiling including cement mortar bedding, (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 9 | M&L, screed bed or bedding layer of mortar 15 mm thick in cement mortar 1: 6 to receive tiles etc finished rough complete all as specified and directed. |
| 10 | M&L for non skid coloured ceramic tiles 6 to 8 mm thick (square / rectengular) area of each tile exceeding 0.18sqm but not exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor etc complete all as specified and as directed. |
| 11 | Material & Labour glazed ceramic coloured tiles 1200 x600x7-8 mm thick on skiriting/dado, set & jointed in neat cement slurry & pointed with white/coloured to match over 10mm thick bedding layer of mortar to wall in cm (1:4) for laying tiles on skirting/dadocomplete all as specified and as directed. |
| 12 | M&L for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc complete all as specified and directed. |
| 13 | Taking down chowkhats or frames with shutters ( without taking off shutters from exe 1.5 sqm and n.exe 4 sqm each |
| 14 | Taking down chowkhats or frames with shutters ( without taking off shutters from n exe 1.5sqm each |
| 15 | Cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in CM 1:3 or cement conc 1:2:4 type B1 as required exc half brick but not exc full brick wall complete all as specified and as directed. |
| 16 | M&L PCC 1:3:6 type C-1 (using 20mm graded stone aggt) as in filling in holes of hold fasts and back filling of chowkats complete all as specified and directed. |
| 17 | M&L Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required:hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 |
| 18 | S&F factory made single extruded WPC (Wood Polymer Composite) chowkhat for solid door & other Frames of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant etc. and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). complete all as specified and as directed by the Engineer-in-Charge. |
| 19 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 20 | S&F, butt hinges medium weight cold rolled, stainless steel and fixed 100 mm size etc complete all as specified and as directed. |
| 21 | S&F, aluminum handles cast type anodized 125 mm size etc complete all as specified and as directed |
| 22 | S&F, aluminum anodized barrel tower bolts of extruded section 150 mm long etc complete all as specified and as directed |
| 23 | S&F in repair 3 mm thick sheet glass, Ordinary quality and glazing with wooden beads in square n. exc 0.5 Sqm in each pane or glazing with oil glass putty including hacking out old broken glass from wooden or steel frame surround complete all as specified and as directed etc complete all as specified and as directed. |
| 24 | S&F, in repair Aluminium wire cloth 0.63 mm nominal dia of wire and avg width of a-pertare 1.40 mm fixed with tinned tacks or galvanized wire staples etc complete all as specified and as directed. |
| 25 | S & F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet used reinforced with MS square tube instead of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed. |
| 26 | S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 27 | M & L for cement concrete tiles 30cm x 30cm x18-20mm thick, machine pressed; set, jointed and pointed in net cement slurry in floors etc, and cut and polished, rubber moulded with grey cement and no pigment and joints filling with PU epoxy,including 18-20 mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 28 | Taking down plaster on brick or stone wall, ceiling etc incl racking out joints hacking for keys scrubbing down with water etc complete all as specified and directed. |
| 29 | M & L 10 mm thick rendering on other than fair faces of brick work or concrete surface in cm 1:6 to be finished fair and even with out suing extra cement complete all as specified and directed. |
| 30 | M&L for external rendering 15 mm thick in CM 1:4 mixed with WPC @0.20Ltr/ bag by weight of cement on brick work or concrete surfaces of wall finished even and fair complete all as specified .Note-WPC shall be measured and paid seperately. |
| 31 | M&L renderig 5mm thick in cement mortar 1:3 on ceiling surface and finished even and smooth with out using extra cment complete all as specified and as directed. |
| 32 | M & L for complete removal of existing treatment from surface of wall all as specified and as directed by the Engineer-in-Charge |
| 33 | M & L for applying a coat of putty on wall all as specified and as directed by the Engineer-in-Charge |
| 34 | M&L for preparation of surfaces of walls and applying two coats of interior emulsion acyrlic paint over a coat of parimer, complete all as specified and directed. |
| 35 | Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/ 10 sqm and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces.complete all as specified and directed. Make-Asian Paint, Apex ultima exterior emulsion or equvalent. |
| 36 | M & L for preparation of old ceiling surfaces and applying two coats of white wash complete all as specified and directed. |
| 37 | M & L for preparation of new plastered surface and applying three coat of white wash on ceiling complete all as specified and as directed. |
| 38 | M&L, preparing for old steel surfaces and applying one coats of synthetic enamel paint over 10 cm width or girth complete all as specified and as directed. |
| 39 | M&L one coat synthetic enamel paint on old wooden surface incl prepartion of old surface of any description not otherwise described over 10 cm width or girth etc complete all as specified and as directed |
| 40 | S&F in repair Vitreous china squatting pan, 'orissa' pattern, size 580 x 440 mm white, with integral footrest (excluding flushing cistern and flush pipe) including provision of concrete beddig and joint to flush pipe to squatt pattern closet including all joints and making good to the floor and taking down old one complete all as specified and as directed. |
| 41 | S&F in repair 10 Ltrs capacity PVC flushing cistern valveles syphonic action type low level, white, with inlet ball valve, float & handle incl brackets & flush pipe complete all as specified and directed. |
| 42 | S & F in repair Vitreous China Ware Wash hand basin white oval type, size 550 x 400 mm size including cutting in slab and pinning ends of brackets or erecting stand and waste pipe complete all as specified and directed |
| 43 | S&F PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and as directed . |
| 44 | S&F in repair 15 mm stop valves angular type, cast copper alloy, screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed . |
| 45 | S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60cm long between flangs complete all as specified and as directed. |
| 46 | S&F in repairs 15mm bore fancy type chromium plated bib taps long body with crutch of butterfly handle screwed down for iron pipes complete all as specified and as directed. |
| 47 | S&F in repair 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. |
| 48 | Supply and fix in repairs of size 125 mm brass chromium plated shower rose with or without swivel joints, any size including fixing to steel pipe or union complete all as specified and as directed |
| 49 | S&F in repairs 15mm dia Concealed stop Cock regular body 15mm with flange complete all as specified and as directed. |
| 50 | S&F in repair CP Brass soap dish fixed to wall with cp brass screws etc complete all as specified and as directed by the Engineer-in-Charge |
| 51 | Suppy and fixing for 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed |
| 52 | Taking down PVC soil pipe with fittings from wall, treches of any description including fittings complete all as specified and as directed. |
| 53 | S &F of 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors or wall and complete all as specified and directed. |
| 54 | S &F of 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors or wall and complete all as specified and directed. |
| 55 | S&F PVC (SWR) bends any radius 110mm bore complete all as specified and directed. |
| 56 | S&F PVC (SWR) bends any radius 75mm bore complete all as specified and directed.. |
| 57 | S&F PVC (SWR) junction single, (single T) equal or unequal 110mm bore with access door complete all as specified and directed. |
| 58 | S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed. |
| 59 | M&L PVC (SWR) Gully trap with grating, 75 mm dia setting and jointing with solvent cement etc complete and as direcetd. |
| 60 | Dismantling water tanks and removing to store of capacity exc 500 & n.exc 1000ltrs etc complete all as specified and directed. |
| 61 | S&F rotational moulded polythylene water storage tank (Cylendrical ,vertical with closed top) hoisted and fixed in position capacity 1000 Ltrs all as specified in SSR Part-I complete all as specified and as directed. |
| 62 | S&F ball valves of 20 mm bore high pressure of PTMT with empxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed complete all as specified and as directed(Minimum weight 20 gms-210 gms) complete all as specified and as directed |
| 63 | S & F in repairs 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed in repairs including taking down the existing fitting complete all as specified and as directed. |
| 64 | Taking up or down existing steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed for 15 mm dia bore |
| 65 | Taking up or down existing steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed for 20 mm dia bore |
| 66 | Supplying, fixing, jointing and testing Supplying and laying of CPVC pipes SDR-11 fittings in trenches/wall complete all as specified. with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed for 15 mm dia bore |
| 67 | Supplying, fixing, jointing and testing Supplying and laying of CPVC pipes SDR-11 fittings in trenches/wall complete all as specified. with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed for 20 mm dia bore |
| 68 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cuttingexceeding 10 cm but not exceeding 20 cm girth in brick walls |
| 69 | Demolition of Reinforced Cement Concrete of Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work completed all as specified and directed by Engr-in-Charge. |
| 70 | S&F Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips. |
| 71 | M&L for providing precast reinforced cement concrete 1:2:4 type B1 using 20 m graded stone aggregate as in landings, kitchen slab, cover slabs (for men holes etc) chullah hoods,chhajjas water troughs mangers,shelves and similar articles with plain faces including neccesary form work complete all as specified and directed. |
| 72 | Demolition of brick work built in cement mortar complete all as specified and as directed. |
| 73 | M & L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cm (1:6), rise of hight for brick wall complete all as specified and as directed. |
| 74 | Demolition of cement concrete(un Reinforced) of any description in any position not otherwise specifically provided for etc. complete all as specified and directed. |
| 75 | M&L for PCC (1:5:10) type E2 using 40 mm graded stone aggregate as in filling and mass concrete complete all as directed and as specified. |
| 76 | M&L for PCC 1:2:4 type B0 12.5 mm stone aggregate of avg 25 mm thick make to slope in sunken floors all as directed. |
| 77 | M&L for rendering 15 mm thick in cement mortar 1:3 Mixed with Water proffing compound and black polyethylen film 175 micron laid in floor as per manufacturer instruction as per manufacturer instructions surfaces finished even and smooth without using extra cement complete all as specified |
| 78 | M&L for applying two coats of OMNIPLAS EP -101 eposy compound manufactured by M/S OM AGRO INDUSTRIES PLASTIC Pvt Ltd Bomboy or equivalent as approved by GE in proportions as per manufacturer instruction on complete surfaces of floor or wall of sunken portioncomplete all as specified and as directed |
