Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Repair and Renovation Providing and fixing of 25mm Devri Stone tile cladding over 15mm cement plaster in 1:4 mix complete incl. Varnish and cost of all material. |
| 2 | Wooden planking, tongued and grooved in flooring including fixing with iron screws complete: Wooden planking, tongued and grooved in flooring including fixing with iron screws complete: 18mm Second class deodar wood |
| 3 | Providing and fixing plain lining tongued and grooved, including wooden plugs complete with necessary screws and priming coat on unexposed surface Second class Deodar Wood 25mm thick |
| 4 | Providing and fixing of KHATAM BANDI ceiling of first class imported wood of approved pattern/ design incl. false ceiling of 12mm thick water proof plyboard. |
| 5 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors,windows and clerestory windows ( Area of opening for panel inserts excluding portion inside grooves or rebates to be measured ). Panellilng for panelled and glazed shutter 25mm to 40mmthick imported wood |
| 6 | French spirit polishing, Two or more coats on new works including a coat of wood filler |
| 7 | Painting with oil type wood preservative of approved brand andmanufacture on New work (two or more coats) |
| 8 | Applying priming coat:With ready mixed pink or grey primer of approved brandand manufacture on wood work (hard and soft wood) |
| 9 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on wood/ steel works |
| 10 | Demolishing of bricktile covering in terracing incl. stacking of servicable materila and disposal of unservicable material within 50 meter lead |
| 11 | Providing and laying Stone soling duly hand packed (quarry) and consolidated with hand rammers incl ramming, watering etc complete job |
| 12 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) incl all carriage complete job. |
| 13 | Providing and laying chisel dressed Devri Stone of size 300x200 mm facewith 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) uptoplinth level including curing.One face dressed Fine chisel dressed |
| 14 | Providing and fixing of heritage type paper machi on proposed khtambandi celieing as per directin by Engineer in charge |
| 15 | Providing hoisting and fixing Ornamental posts of Size 12\\"x12\\" and 12' high .first class budloo / fir wood |
| 16 | Providing and fixing plain jaffri of 35x10 mm laths placed 35 mm apart (frames to be paid separately) including fixing 50x12 mm beading complete with : First class deodar wood. |
| 17 | Providing and fixing of glass panes with putty and glazing clips in steel doors, windows clerestory windows all complete with 5.0 mm thick glass panes. |
| 18 | Providing Retro-reflective regulatory sign board of size 900mm diameter made out of 2mm thick aluminum sheet, face to be fully covered with highintensity encapsulated lens type retro-reflective sheeting as approved byEngineer-in-charge. Letter, symbols, borders, etc. will be as per IRC:67with required colour scheme on the boards and with the high intensitygrade A. the aluminum sheet to be riveted to M.S. frame of angle iron ofsize 40x40x4mm. The boards will be fixed to 1 No. 50x50mm square post made of M.S. angle 50x50x4mm, 4m long welded to the frame withadequate anti-theft arrangement. Sheet work to be painted with two ormore coats of synthetic enamel paint over an under coat (primer) and backside of aluminum sheet to be painted with two or more coats of epoxypaint including appropriate priming coat complete in all respects as perdirections of Engineer-in-charge. |
| 19 | Civil work Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m Sq. on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil : |
| 20 | Providing and laying Stone soling hand packed incl ramming, watering etc complete job |
| 21 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) |
| 22 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. (Back filling) |
| 23 | Supplying and filling in plinth with fine sand under floors including, watering,ramming, consolidating and dressing complete. |
| 24 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable separately. All works upto plinth level |
| 25 | All works above plinth level upto floor V level |
| 26 | Add or deduct for using more or less cement in the items of design mix over and above the specified cement content therein |
| 27 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 28 | Centering and shuttering including strutting, propping etc. and removal of form for : Foundations: footings, bases of columns etc. for mass concrete. |
| 29 | Suspended floors, roofs, landings, balconies and access platform. |
| 30 | Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 31 | Columns, pillars, piers, abutments, posts, and struts. |
| 32 | Stairs (excluding landings) except spiral staircases. |
| 33 | Edges of slabs and breaks in floors and walls Under 20 cm wide |
| 34 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 35 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation/ plinth & superstructure above plinth level upto floor five level including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 36 | Half brick masonry with common burnt clay (non-modular) bricks of class designation7.5 in superstructure above plinth level upto floor V level Cement mortar 1:3 ( 1 cement : 3 coarse sand) |
| 37 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class deodar wood |
| 38 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 39 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. First class kail wood (35mm Thick) |
| 40 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick First class kail wood |
| 41 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.First class kail wood 35 mm thick |
| 42 | Providing and fixing 35mm thick wire guaze shutter using galvanized M.S wire gauze of average width for aperture 1.4m in both directions of wire dia 0.63mm for door,windows and clerestory windows with ISI marked M.S pressed butt hinges bright finish of required size mecessary screws as per directions of EIC First class kail wood |
| 43 | Providing and fixing 3.5mm including cost and fixing wooden fillets/ beeding of required size and shape with nail incl all carriage complete |
| 44 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 250x16 mm |
| 45 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete a) 200x10mm |
| 46 | b) 100x10mm |
| 47 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. A) 150mm |
| 48 | b)100mm |
| 49 | Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : Single rubber stopper |
| 50 | Providing and fixing PVC rigid foam sheet 1mm thick on existing door shutters (bathroom and W.C. doors) using synthetic rubber based adhesive and other allied fixing material to fix it properly on base complete job |
| 51 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600 mm x 600 mm |
| 52 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with with water proofing cement compound @ 0.253kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm . This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes reparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 53 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600 mm x 600 mm |
| 54 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 55 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade (18mm Thick) |
| 56 | Providing edge moulding to 18 mm marble stone /granite stone counters, Vanities etc.including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge (Granite Work) Double moulding |
| 57 | 6 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) |
| 58 | 12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) |
| 59 | 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand). Complete job |
| 60 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. ( 2mm Thick) |
| 61 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre |
| 62 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. (Two Coats) |
| 63 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 64 | Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood). |
| 65 | Painting with synthetic enamel paint of approved brand and manufacture of required color to give an even shade. Two or more coats on new work. |
| 66 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same withnecessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 67 | Making plinth protection with common burnt clay bricks of class designation 7.5 laid on edge in cement mortar 1:6 (1 cement : 6 coarse sand) with 12 mm thick bed of cement mortar 1:6 (1 cement : 6 coarse sand) over 75 mm bed of dry brick aggregate 40mm nominal size rammed, consolidated and grouted with fine sand. The top of bricks pointed with cement mortar 1:3 (1cement: 3 fine sand) and curing complete |
| 68 | Carriage of materials by mechanical transport from source upto site of work including loading, unloading and stacking Carrage of coarse aggregate for avg lead of 35 kms |
| 69 | Carrage of fine aggregate for avg lead of 85 kms |
| 70 | Carrage of bricks for avg lead of 100 kms |
| 71 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position including welding etc and applying a priming coat of approved steel primer all complete. |
| 72 | Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. |
| 73 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required including all lifts,leads and carriages complete job |
| 74 | Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) |
| 75 | Providing valleys of 90cm wide overall in plains G.S. sheets fixed with polymer coated J. or L. hooks, bolts and nuts 8 mm dia G I. limpet and bitumen washers complete.1.25mm thick with zinc coating not less than 350gm/m2 |
| 76 | Providing and fixing plained eaves boarding. wood 2nd class Deodar wood 300x40 mm (nominal size) complete job |
| 77 | P/F 12mm thick imported wood as soffit including cost of frame work of KD wood underneath of required size as per directions of EIC including cost of primer and paint one or more coats involving all cost of labour,carriage, material , scraffolding cjob (Item to be executed as per directions of EIC) |
| 78 | Sanitary works Providing and fixing Floor mounted white vitrous china double trap syphonic WC with 10 litre cistern and all fittings & fixtures,seat cover etc with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid |
| 79 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, includingpainting of fittings and brackets, cutting and making good the wallswherever required :18.7.1 White Vitreous China Wash basin size 630x450 mm with a pairof 15 mm C.P. brass pillar taps. |
| 80 | providing and fixing cp brass 32mm size bottle trap of approved quality & make and as per the direction of engineer-in-charg 32 mm dia |
| 81 | Providing and fixing Braided Hoses with Two 15mm CP Brass Nuts & Rubber Washers Without Nipple (Suitable for Geysers and basins) of approved make : 45 cm length 15 mm nominal bore |
| 82 | Providing and fixing toilet paper holder : CP Brass |
| 83 | Providing,Fixing,testing and commissioning of CP brass twin coat hook with concealed screws. |
| 84 | Providing and Fixing Health Faucet 15mmdia with CP flush pipe, CP nozzel hook complete including CP flange etc. |
| 85 | Providing,Fixing,testing and commissioning of CP brasstowel ring hook with concealed screws. |
| 86 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931: 15 mm nominal bore |
| 87 | Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms. |
| 88 | Providing and fixing horzontal/vertical Hot water geyser made of MS body with copper jacket inside with necessary inlet, outlet, drain, overflow, vent and all safety accessories etc. complete including cutting and making good the walls, wherever required. 25 lit for shower |
| 89 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 90 | Providing,Fixing,testing and commissioning of solid state no touch opening fully hygenic hand drier of apprved shade with single blower with time delay, summer and winter control music while drying volume on/ off control incl. providing necessary brackets cable form direr to plug plug top key and lock etc complete as required |
| 91 | SOIL, WASTE, VENT & RAIN WATER PIPES Providing and fixing UV stabilised UPVC pipes, Type B as per IS:13592 for soil, waste, rain water and vent, including all fittings with or without access i.e Clean out plug,bends, junctions, cowls, offsets, couplers, connectors, heavy duty Metal pipe clamps with rubber seal/clips//holders etc. and jointing with heavy duty solvent cement, complete as per manufacturer's specifications and making good the same, complete as directed by the Engineer-in-Charge. (vertical pipes can be jointed through rubber O rings) Inclouding cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate, 20 mm down gauge) 75 mm in bed and all around soil and waste pipes under floor, including shuttering and centering for: A) 75mm outer dia. |
| 92 | 110mm outer dia. |
| 93 | Providing and fixing thermal insulation over pipes/fitting/Trap Etc as req. in exposed/chase with 32 mm thick approved equivalent thermal insulation tubing, a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber having density of 60-90 Kg/m3 over pipes of following sizes including all required accessories complete as per manufacturer's specifications and finishing it with 6mm thick rough plaster of 1:3 mix (1 Portland Cement : 3 hard settling cement compound)(Make-K-Flex,Eurobatex,Vidoflex.) 75mm outer dia. |
| 94 | 110mm outer dia. |
| 95 | Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. :100mm dia pipe |
| 96 | Providing and fixing multi inlet uPVC floor trap with minimum 50mm water seal of self cleaning design with 110 mm outlet consisting of all necessary fittings and provding strainer of 150 x 150 mm square stainless steel 2 mm thk frame with slotted lockable grating on top of the trap level matching the level of floor finish etc, complete including cost of cutting and making good the walls and floors wherever required and as directed by Engineer in charge. (The inlet diameter shall be 32mm, 40mm or 50mm as per site requirements) |
| 97 | Providing and fixing uPVC pipe as per IS 4985, Class-3, 6Kg/cm2 with cement solvent joint, complete with all fittings and clamps etc including cutting and making good the walls and floors for waste pipes from wash basins, urinals, sinks & balcony drainage, as directed by the Engineer-in-charge. 32 mm OD |
| 98 | 40 mm OD |
| 99 | Providing and fixing SS grating with frame including fixing to the floor with cement mortar.100mm dia |
| 100 | providing and fixing of 110mmx50mm outlet UPVC floor drain consisting of all necessary fittings and providing strainer of 150x150mm square stainless steel 2mm thick frame with slotted lockable grating on top of the trap level matching the level of floor finsih etc all complete as per specification and directin engineer incharge |
| 101 | INTERNAL WATER SUPPLY PP-R should be a complete installation system consisting of pipes and fittings of a thermoplastic polypropylene PP-R 3-layer glass fibre compound (type 3/type 4) of PN20 (SDR 6)/PN16 (SDR 7.4) and PP-RCT (SDR9 and SDR11) within a range of diameters 20-200 mm in Green/Grey colour of pipe dimension series in accordance with EN ISO 4065 having linear expansion of 0.05 mm/mK with DVGW and QBSC/TBR certification as per EN ISO 15874-2:2013-06E, EN ISO 15874-3:2013-06E standard. System elements are connected by muff-welding (thermal polyfusion) or electrofusions welding with the use of electric welders. The welding technology i.e. uniform connections, guarantees an exceptional leak-tightness and mechanical strength of a system and use for internal and external water supply, cooling systems (hot and cold water), production process industrial systems and use in shafts, basements, terrace with insulation.MAKE : KAN-therm, Aquatherm, Poloplast concealed work incl. cutting chases and making good the wall 16x2 mm outer dia pipe |
| 102 | 20x2 mm pipe |
| 103 | 25x2.5 mm outer dia pipe |
| 104 | PP-R should be a complete installation system consisting of pipes and fittings of a thermoplastic polypropylene PP-R 3-layer glass fibre compound (type 3/type 4) of PN20 (SDR 6)/PN16 (SDR 7.4) and PP-RCT (SDR9 and SDR11) within a range of diameters 20-200 mm in Green/Grey colour of pipe dimension series in accordance with EN ISO 4065 having linear expansion of 0.05 mm/mK with DVGW and QBSC/TBR certification as per EN ISO 15874-2:2013-06E, EN ISO 15874-3:2013-06E standard. System elements are connected by muff-welding (thermal polyfusion) or electrofusions welding with the use of electric welders. The welding technology i.e. uniform connections, guarantees an exceptional leak-tightness and mechanical strength of a system and use for internal and external water supply, cooling systems (hot and cold water), production process industrial systems and use in shafts, basements, terrace with insulation.MAKE : KAN-therm, Aquatherm, Poloplast Exposed on wall / terrace a) 16x2 mm outer dia pipe |
| 105 | 20x2 mm outer dia pipe |
| 106 | 25x2.5 mm outer dia pipe |
| 107 | Insulation on pipe is use over all length of pipe as per requirement Providing and fixing thermal insulation over pipes in exposed/chase with 32 mm thick approved equivalent thermal insulation tubing, a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber having density of 60-90 Kg/m3 over pipes of following sizes including all required accessories complete as per manufacturer’s specifications and finishing it with 6mm thick rough plaster of 1:3 mix (1 Portland Cement : 3 hard setting cement compound) (Make: K-Flex, Eurobatex, Vidoflex) :- 25mm dia |
| 108 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete15 mm nominal bore |
| 109 | 20 mm nominal bore |
| 110 | 25 mm nominal bore |
| 111 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 112 | External Sewage and storm water Excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 M including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cms in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia. Metre |
| 113 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.150 mm dia. |
| 114 | Providing and laying cement concrete 1:5:10 mix (1 cement: 5 coarse sand: 10 graded stone aggregate 40 mm nominal size) upto haunches for pipes including bed concrete as per standard design. 150 mm dia. |
| 115 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 180x150 mm size P type With Sewer bricks conforming to IS : 4885 |
| 116 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete asper standard design : nside size 90x80 cms and 1.5 cms deep including CI cover with frame (Light duty) 610x455mm internal diamesions total weight of cover and frame to be not less than 38 kg ( weight of cover 23 kg and weight of frame 15 kg) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 117 | Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated asper IS: 10910 on 12mm dia steel bar conforming to IS :1786 having minimun cross section as 23 mm x 25 mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruded legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and heaving manufacture\\"s permanent identification mark to be visible even after fixing \\" incluting fixing in manholes with 30x20x15 cm cement concrete block 1:3:6: (1 cement :3 coarse sand :6 graded stone aggregate 20mm nominal size )complete as per design. |
| 118 | Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 119 | Fire Fighting System Supply and installation of following types of extinguisher with provision of wall bracket (fixed with anchor fastener).ABC Stored Pressure Type Fire Extinguisher 6 Kg capacity bearing ISI Mark for Firefighting bearing ISI mark, EN 615 Approved Powder, ABC 87% MAP, complete with all accessories.6 Kg |
| 120 | CO2 Type Fire Extinguisher 4.5 Kgs Capacity made from brand new seamless cylinder as per IS:7285 and CCE approved fitted with discharge hose and horn and squeeze grip type valve with initial charge as per IS:15683:2006 specification, bearing ISI Mark.4.5 Kg |
| 121 | ELECTRICAL WORKS: Wiring for Light point/Fan point/Exhaust fan/Bell point with (P+N+E) 3x1.5 sq.mm FRLS-H PVC insulated Multi strand Copper conductor single core cable. (Havells/Polycab/Finolex/Eq Make) in surface/recessed Conduits laid in slabs (Including Cost of Conduit 25mm) with 01 No.of 6 Amp Modular Switch, Modular Plate, Cover in front & suitable GI box etc. ISO/IEC Certified / Schneider /Havells/Legrand/Anchor roma plus/ABB/Eq.Make & along with 2.5 Sqmm (P+N+E) Circuit Wire of same make as mentioned above & items shall be approved before execution of work by SDO. |
| 122 | : Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc, as required, ISO/IEC Certified of Havells /Legrand /Anchor /Schneider /ABB/Eq Make & shall be approved before execution of work by SDO. |
| 123 | Wiring for Power Plug with (P+N+E) 3x4 sq.mm FRLS-H PVC Insulated Multi strand Copper Conductor single core cable in surface/Recessed Conduit (Havells/Polycab/Anchor/Eq. Make). |
| 124 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required, ISO/IEC Certified/Legran/Anchor roma plus/Schneider/ABB/Eq Make & shall be approved before execution of work by SDO. |
| 125 | Wiring for 6Amp Plug (Computer Point) with (P+N+E) 3x2.5 sq.mm FRLS-H PVC Insulated Multi strand Copper Conductor single core cable in surface/Recessed Conduit (Havells/Polycab/Anchor/Eq. Make). |
| 126 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings), ISO/IEC Certified Havells/Legrand/Anchor roma plus/Schneider/ABB/Eq.Make & shall be approved before execution of work. |
| 127 | Wiring for Sub main Wiring along with earth Wire with the following Sizes of FRLS PVC insulated copper conductor, single core Cable in surface/Recessed medium class PVC conduit (Havells/Polycab/Eq. Make) & shall be approved before execution of work (Including Cost of Conduit Channel) a) 2x10 sq.mm + 1x10 sq.mm (P+N+E) for Power point Sub main in One run from Main Panel to Distribution Boards. |
| 128 | b) 2x6 sq mm + 1x6 sq.mm (P+N+E) for Lighting/ Sub main in One run from Main Panel to Distribution Boards. |
| 129 | Supply/Fixing/Testing and Commissioning of 6Amp to 32Amp Rating SP, 240v, 'C' Curve 10K Miniature Circuit Breaker suitable for inductive load of following poles in existing MCB DB Complete with connections. (L&T/Siemens/Legrand/Havells/ABB/Eq. Make) |
| 130 | Supply/Fixing/Testing and Commissioning of following ratings , Double pole, (P+N) 240 V, C Curve 10K, Miniature Circuit Breaker (MCB) in the existing MCB DB complete with connections. (L&T/Siemens/Legrand/Havells/ABB/Eq Make) a) 40Amp |
| 131 | b)63 Amp |
| 132 | Supplying and Fixing of MCB 4 way (4+12), horizontal typed, sheet steel, Double Door Distribution Board, TPN 240V/415 V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc, as required. (L&T/Siemens/Legrand/Schneider/ABB/Eq Make). |
| 133 | Supply/Installation/Testing and Commissioning of 18W LED Conceal (Commercial Type) light luminary fitting round shape with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminium Heat Sink and PF>0.95, THD<10%, CCT 5700K, CRI 80. The LED with Useful life of 50000 Hrs at L70. The Input voltage range shall be 150V to 270V. The Fixture should have Inbuilt-Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/government of India authorised lab. The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years, which includes replacement of fixtures of Philips/Havell's/Wipro/Halonix/Eq Make. |
| 134 | Supplying & Fixing of IK08 IP-66 protected high power LED 50 Watt flood light system with single piece Pressure die cast aluminium housing, toughened glass diffuser with suitable lenses on LED to achieve various beam angles, of power LED of 3 to 5 watt each. Integrated potted driver as a unique BIS R number having efficiency more than 85% and in compliance to BIS certified and Trade mark certificate. The System level Luminaire efficacy 125 lm/wt. LED driver Input Voltage AC 120 to 270 V AC with High voltage Cutoff @ 300 V AC and Auto resetting Safety Power Factor >0.95, THD(I) <10% driver current < 750mA driver should be Phase to phase protection of 440 V for 4 Hrs. Electrical Connector, Surge Protection Min 4KV internal and 10KV external but inside driver compartment, System life of 50000 Burning hours with 70% of Initial Lumens maintained, CRI 70 and CCT 5700K - 6500K Manufactures Word Mark/Name Engraved/Embossing/Screen printing on die cast housing to allow traceability/authenticity Fixture shall be IS 10322 Complianced. OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure \\"A\\" attached with this BSR:- High Power LED Flood Light Minimum lumen output 6200 lm of Havells/Crompton/Philips Make as approved and to be installed on outside block including ST of suitable size of Gyser bolt. The job further includes replacement warranty of fixture (if damaged burnt out what so ever reason) for a period of two years reckoned from date of successful commissioning handing over of site to intending department. |
| 135 | Supply/Installation/Testing and Commissioning of 1200 mm sweep, ceiling fan with 03 No blades, 30 cm long down rod, 02 No. canopies, shackle kit, Power Factor not less than 0.9, Service Value including safety pin, nut bolts, washers, temperature rise 75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase Supply, etc. complete as required. USHA/Havells/Anchor/Crompton Greaves/EqMake. (Minimum 1-Star). |
| 136 | Supply/Installation/Testing and Commissioning of 225-250mm Shutter Typed, 320 Cu.m/Hr. AC 220-240 Volts, 50 Hz Exhaust fan made out of ABS Plastic Material with inbuilt thermo cut-off Protection and Noise Level not exceeding 37dB. of following sizes incl. conection etc. USHA/Havells/Crompton/Eq. Make. (Min 1-Star). |
| 137 | Supply Installation, Testing and Commissioning 450 Cu.m/Hr. AC 220-240 Volts, 50 Hz industrial type Exhaust fan Material with inbuilt thermo cut-off Protection and Noise Level not exceeding 37 dB of following sizes incl. conection etc. Usha 450mm Shutter Typed (heavy duty). |
| 138 | Supply Laying Connecting and Commissioning of 50 sq.mm 2-Core XLPE/PVC insulated and steel armored 1.1 KV grade Aluminum Cable of Havells/Polycab/Eq. Make with required size of thimbles dully crimped with hydraulic crimping tool including Providing/Fixing of saddles/clips with making of connection and partially to be laid underground through DWC High Density Polyethylene Pipe having Corrugation on Outer wall and Plain surface inner wall Conforming to IS: 14930 Part-1 and 2 Complete with accessories for Protection of 1.1 KV Grade under Ground cable Directly in Ground at a Depth of 50 CM including excavation and Refilling the Trench( matrial to be approved before execution |
| 139 | Supply Installation Testing and Commissioning of CPRI Approved (IS/IEC 61439) Main Controlling Panel fabricated out of heavy gauge sheet steel duly Painted with powder coated paint dust protected earth terminal fitted on epoxy cleats, volt meter & Ammeters with selector switch & CT Coil of required ratio with all necessary connections & inner wiring of panel on both heating and lighting circuits. The switches are connected with bus bars inside panel & manufacturer CPRI Certified. The switch are adjustable type made of Havells/L&T/ABB/Legrand/Siemens Make and change over switch should be of Havells/L&T/Legrand/Schneider Make.Specifications:1) Normal Incomer: 100 Amp-2 Pole 20KA C-CURVE MCCB with extended terminals Havells/L&T/Legrand/Schneider Make as approved 01 No, 300 Amps TPN Al Bus Bar Set 01 Set, Digital Voltmeter Ammeter C.T Coils with Selector Switch & Phase indicator Set.2) Outgoing: Normal outgoing for Heating/AC/Lighting Inverter etc load (40 Amp DP MCB 02 No. as per site requirement & 63-Amp DP MCB 02 No. as per site requirement) |
| 140 | ENVIRONMENTALLY SAFE MAINTENANCE FREE COPPER ROD EARTHING SYSTEM. Necessary soil treatment is to be made by the contractor in order to improve the Pit resistance Value. Supplying, Installation and Testing of 75 mm copper Pipe Filled with Crystalline conductive Mixture with Eco friendly GEM Backfill Compound 2No. Bags also having Earth pit chamber (300mm x 300mm) with man-hole cover for the above. Including cost of 20MM Wide copper strip as required in one run fitted with brass nut bolt & spring washer from EARTHING ROD up to MAIN Control PANEL through DWC High Density Polyethylene Pipe corrugation complete job |
| 141 | :Installation, Testing & Commissioning of Indoor Dome Camera outdoor Bullet camera IP CCTV Monitoring, Recording & Streaming System as per the Following Specifications. Minimum 6 megapixel progressive scan HD CMOS Lens-3.6 mm or Better. DC-Iris Auto Iris Field of view:- 100° to 45° (horizontal) 72-34° (vertical) Day/night operation - The camera should provide day/night functionality automatically switches to night mode in low-light scenes. Wide dynamic range - True WDR 100dB or equivalent or better. Minimum illumination/light sensitivity Color mode: @0.2 lux black and white mode: @0.03 lux. Video compression:- H.265 motion JPEG Resolutions and frame rates (H.265) - At 2304x1728, the frame rate shall be 25 FPS or better for viewing. All the streams shall be user configurable (with respect to resolution, frame rate & compression standard). All the cameras (sensors) shall have minimum 5 streams. PoE:- It should be PoE enabled and with IK08 enclosure and in built 20m IR. Certification:- It should be FCC, CE, UL certified ONVIF 2.0 Support. Supported protocol - DHCP, HTTP, HTTPS, NTP, RTP, RTSP, SMTP, SSL/TLS, TCP/IP, Secure Real Time Transport Protocol (SRTP), Bonjour, SNMP, and Secure Shell (SSH) of Hikvision/Dahua/CP Plus/Equivalent make. |
| 142 | Supply/Installation/Testing/Commissioning of 4k 4 Channel CP plus Network Video Recorder (NVR) with 2 SATA Ports with HDMI cable patch cards of Hikvision/Dahua/CP Plus/Equivalent make. |
| 143 | Supply/Installation Testing & Commissioning of 24 Inch Smart LED TV of Samsung Make with HDMI cable of standard quality with One Year Warranty. |
| 144 | : Providing and supplying 1 TB capacity Hard Disk Drive (HDD) suitable for desktop computers/DVR/NVR systems, having minimum storage capacity of 1000 GB, 7200 RPM rotational speed, SATA III interface (6 Gb/s), with reliable data transfer rate and high durability for continuous operation. . The HDD shall be from reputed make and compatible with standard operating system and survellinace recording system inl. all accessoriesw , testing , installation 9 if required) and waranty of minimum 1 year |
| 145 | Supply, Laying, testing and commissioning of 20 mm dia. High class PVC conduit Heavy Duty. Unbreakable conduits to be laid in RCC Slab and downs in walls including cutting the wall and making good the same with 1:6 mix cement plaster in case of recessed conduit as required etc including cost of accessories like bends and heavy Gauge Sheet Steel Deep Junction boxes of approved make.( before laying of conduit the same to be approved by site engineer). Preferred make Ravindera/Anchor/Alba/Polycab. |
| 146 | : Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/recessed Steel/ PVC conduit as required. 1 run of cable |
| 147 | Supply of SMPS Power Supply: Providing 12V DC SMPS (5-10 Amp) with distribution box, over-voltage and short-circuit protection, suitable for 4 cameras complete. |
| 148 | Supply installation testing and commissioning of Sine Wave Inverter of Capacity 5 KVA (Plus), supporting 4 batteries 200Ah with minimum 2 hour back-up at full load, 24 Month Warranty. Safe for sensitive appliances with Sine wave output. Auto over-load handling capacityinstallatin and maintenance friendly offers high qulaity and reliable power back-up solution for office and homes , MCB for protection form input amin bYpass switch for supplying outpit directly form frid in case of UPS fault. Noiseless operation with the help of low hormonic distortion Display to esliy understand sttua os main avilabilty batterry status etc comprehrensve protection atgainst shot circuit reverse polarity battery over charge deep discharge etc. adaptive Battery charging control system techomnoly (ABCC) ensures faster battery charging and enhaces battery life by around 70% suports a wide battery range i,e flat plate tubular & VIRLA (SMF) preffered make luminoius . Luminous/Microtek/Exide/Sukam/Eq.make. The job also includes angle iron stand for housing 4 No of batteries and inverter.\\" Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
