|
| 1 | Exvavation in all kinds of Soils & Soft murum including boulders up to 0.6 m dia.(0.113 cum) for canal,seating of embankment,filter drains / catch water drains etc. and placing the excavated stuff neatly in dump area or for formation of service road/embankment as directed including cost of all materials,machinery,labour,dressing bed & sides to required level and profile etc.complete with lead up to 15 m and 6 m lift. |
| 2 | Exvavation in Hard Murum including boulders up to 0.6 m dia.(0.113 cum) for canal,seating of embankment,filter drains / catch water drains etc. and placing the excavated stuff neatly in dump area or for formation of service road as directed including cost of all materials,machinery,labour,dressing bed & sides to required level and profile etc.complete with lead up to 15 m and 6 m lift. |
| 3 | Excavation in Soft Rock without blasting including boulders up to 0.6 m diameter (0.113 cum) for canal, seating of embankment, filter drain / catch water drains etc., and placing the excavated soft rock neatly in dump area or for formation of service road as directed including cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc., complete with lead up to 15 m and 6m lift. |
| 4 | Excavation in Hard Rock all toughness including by breaker including boulders up to 0.6 m diameter (0.113 cum) for canal, seating of embankment, filter drain / catch water drains etc., and placing the excavated soft rock neatly in dump area or for formation of service road as directed including cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc., complete with lead up to 15 m and 6m lift. |
| 5 | Dewatering by pumping out water collected with 10 to 19 H.P.Diesel & Electrical pumps incl. cost of material machniery ,labour,providing sump and all other ancillary operations whenever necessaryetc completeas directed |
| 6 | Providing and laying in situ cement concrete of grade M-15 of trap / granite / gneiss / quartzite / graded metal for PCC with or without surface reinforcement / RCC concreting requiring heavy or special type of shuttering for works of gallery, sluice, spillway crest, spillway downstream face, energy dissipating structures, intake structures, training walls, piers, abutments etc. with Concrete Mixer considering lead of 50 m with shuttering and scaffolding, placing, compacting, curing etc. complete with an initial lead of 50 m. & lift of 1.5 m A) C.C.M. - 150 (1:2:4) (40 MSA) |
| 7 | Providing,fabricating and placing in position reinforcement steel for RCC works including Cutting, bending, hooking, laying in position and tying M.S./HYSD/TMT bars for reinforcement of R.C.C. work as per detailed drawing etc. complete. |
| 8 | Providing & laying rubble soling below foundation in layers incluiding filling with rubble chips murum etc complete |
| 9 | Drilling 32 mm. dia. for anchoring in rock . steel anchor exclud.cost of grouting & anchor bar including flushing the hole,conveying all machinary,eqipment & necessary watering complete |
| 10 | Manufacturing with QAP & Fabrication needel gates- curved type size 2.15 x 0.5M-74 74 Kg weight as per relevant Indian Standard with all material , Mild Steel Confirming to IS 2062, Rubber seal confirmimg to IS 4623 & welding electrodes AWS E 6013 for general weld joints it includes all material labour charges machinary charges , 1 Km lead charges of transporting, loading and unloading charges of gate parts of Site, Inspection & Quality control Charges, sand blasting, painting with one coat of zinc rich primer on dry film to give total dry film thickness 70+/-5 microns and 2 coats of sloventless coal tar epoxy paint applied to give minimum dry film thickness of 150+/-5 micron per coat as per IS 14177. |
| 11 | Providing and fixing MS Channel 100 x 100 x 6 mm as grooves in Concrete including fastening , errecting in proper line level in grooves including cutting welding with ncy centering completed |
| 12 | Providing and fixing position jungle teak wood needles including providing spreading scarping two coats with colour as directed |
| 13 | Back filling up to ground level behind the canal structures etc complete with suitable material of approved quality in layers not exceeding 20 cm without disturbing the structure etc complete as directed. |
| 14 | Providing and fixing canal information board of 1.2m X 0.75 m prepared on 16 gauge M.S. sheet with angle iron frame of size 35X35X 3 mm with cross bracing of size 25 X 25 X 3 mm including painting with one coat of zinc chromate storing primer and two coats each of green / white back ground and back side grey store enamelled bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows coated with non pealable crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50 X 50 X 5 mm of 3.65 m long inflated at bottom drilled on top and painted in white and black bonds of 30 cm with four numbers high strength of G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete in M-15 block of size 60 X 60 X 75 cm as directed by engineer-in-charge. |
| 15 | Laboratory testing charges for various materials required for items of work, on the basis of testing frequency and charges fixed by Vigilence and Quality Control Circle, Pune.Item / Page No : 4 / 0Additional Specifications : 1. The amount of laboratory testing charges will be paid to contractor only after submission of the original receipt from the Vigillence and Quality Control Office with the name of work mensioned on it.Fineness Modulus (Sieve Analysis), Silt and Clay Content Test for Sand1 Test per SourceSieve analysis |
| 16 | Fineness modulus (Sieve analysis),Silt & clay content test of fine aggregate |
| 17 | Water absorption specific gravity impact value crushing value |
| 18 | Compressive Strength of Cement Concrete Cube |
| 19 | Royalty Charges For Sand |
| 20 | Royalty Charges For other material Please Enable Macros to View BoQ information |
