|
| 1 | GSR 2023/Building/4006 a) Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5 m in width or 10 sq.m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. a) All kinds of soil |
| 2 | GSR 2023/Building/5035 Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete. |
| 3 | GSR 2023/Building/6002 a) Providing & laying cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded granitic or basaltic stone aggrt. 40 mm. nominal size) excluding cost of centering, shuttering and finishing in: a) All works upto plinth level |
| 4 | GSR 2023/Building/6012 b) Centering and shuttering including struttings, propping etc. and removal of formwork for : b) vertical surfaces such as retaining walls , return walls, walls (any thk) including attached pilasters, buttresses, plinth and string courses, fillets, etc. |
| 5 | GSR 2023/Building/6052 Providing TMT steel reinforcement bars of (SAIL, TATA. VIZAG, JSW Steel Ltd.) ) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member. |
| 6 | GSR 2023/Building/5003 + 5005 Pre-cast cement concrete solid block masonry of compressive strength 70 kg / cm2 in cement mortar 1:4 (1 cement : 4 corase sand ) in foundation and plinth size of blocks (30 x 23 x 15). Extra for precast concrete block masonary in all sizes in superstructure from floor one level upto floor V level. |
| 7 | GSR 2023/Building/11036 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge. |
| 8 | GSR 2023/Building/8019 Providing & fixing bolts with nuts & washer complete. |
| 9 | GSR 2023/Building/6001 a) Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering, shuttering and finishing : a) All works upto plinth level |
| 10 | GSR 2023/Building/6031 a) Providing and laying in position (1:2:4) reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement. (1 cement:2 coarse sand:4 graded stone agg 20mm nominal size) a) All works upto plinth level |
| 11 | GSR 2023/Building/8003 b) Steel work welded (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only)in built up sections trusses and framed work including cutting, hoisting, fixing in position and applying priming coat of red lead paint. b) In tees, angles, flats and channels. |
| 12 | GSR 2023/Building/10013 a) Providing asbestos cement sheets roofings fixed with galvanized iron j or l hooks, bolts & nuts 8mm dia G.I. plain and bitumen washer complete excluding the cost of purlines rafters, and trusses. a) Corrugated sheets 6mm thick. |
| 13 | GSR 2023/Building/10017 c) Providing and fixing ridges & hips in asbestos cement sheets roofing with G.I. j or l hooks, bolts and nuts 8mm dia G.I. plain and bitumen washers complete. c) Close fitting adjustable ridges |
| 14 | GSR 2023/Building/9006 40 mm. thick red oxide flooring under layer of 30 mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 12.5mm nominal size) and top layer of 10 mm thick plaster of cement red oxide mix using 3.5 kg. Of red oxide of iron per 50 kg. of cement 1:3(1cement : 3 coarse sand) finished with floating coat of neat cement red oxide mix of same proportion. |
| 15 | GSR 2023/Building/9084 b) Providing and laying factory made Shot blasted cement concrete interlocking paver block of minimum M35/M40 grade made by heavy duty block making machine with strong vibratory compaction and of aprpoved size and design / shape laid in 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand, etc. all complete as per the direction of Engineer.- in I, Wave, Rectangular, Square etc. shapes. The products should comply to IS 15658:2006 and manfucatured by ISO9001: 2008 certified plant. The shot blasting should be done using 0.4-0.5mm dia steel shots with a speed of 3200 rpm. b) 60 mm thick in Grey colour (M35 grade) |
| 16 | GSR 2023/Building/11117 Painting three or more coats with acryllic exterior paint of approved brand and manufacture (Such as Dulex/ Asian Paints/ Sherwin Willians) including applying one coat of cement primer and one coat of surface treatment etc. complete. |
| 17 | GSR 2023/Building/11081 Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade Please Enable Macros to View BoQ information |
