|
| 1 | Dismantling of wall and ceiling boards (fibre pulp, insulation, etc.) or insulation boards/slabs/ lankets, any thickness, including cover fillets complete all as specified and directed. |
| 2 | M& L for 9 mm thick Prelaminated particle board, interior grade, prelaminated one side with ecorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 3 | M& L for 11 to 12 mm thick Prelaminated particle board, interior grade, prelaminated one side with ecorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 4 | Dismantling of timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete |
| 5 | M & L for 2nd class hard wood timber scantling plain fillets. square, rectangular or triangular in section area exc 13 sqcm not exc25 sqcm , clean sawn, secured with nails or brads complete. |
| 6 | M & L for 2nd class hard wood timber scantling plain fillets. square, rectangular or triangular in section area exc 3 sqcm not exc 6 sqcm , clean sawn, secured with nails or brads complete. |
| 7 | M & L for 2nd class hard wood timber scantling plain fillets. square, rectangular or triangular in section area not exc 3 sqcm , clean sawn, secured with nails or brads complete all as specified . |
| 8 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings |
| 9 | S& F Pre-painted galvalume aluminum zinc coating GI based Plain steel heet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 10 | S& F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/including rain guard cladding to wall,fixed with self tapping screws as specified.. |
| 11 | Demolition of cement concrete in ground floor & paving n. exc 15 cm thick (below or above GL) unreinforced complete all as specified and directed. |
| 12 | M&L for 75 mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified and directed. |
| 13 | Taking down of unserviceable steel windows with frame (without taking down shutters and grill from frame) of size not exc 1.50 sqm each including cutting holes of appropriate size for insertion blocks of cement concrete hold fasts complete all as specified and directed. |
| 14 | S&F factory made box type steel window with pintle hinges & 2 Nos 150 mm mild steel tower bolts to each shutte, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Grawing No CEJZ/TD-06/07 & CEJZ/TD-07/07 |
| 15 | S&F factory made box type steel window with pintle hinges & 2 Nos 150 mm mild steel tower bolts to each shutte, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Grawing No CEJZ/TD-06/07 & CEJZ/TD-07/07 |
| 16 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n. exc. 1.5 Sqm each and removing from site complete all as specified and directed. |
| 17 | S&F 35mm thick (factory made) plain framed panelled door shutters of 2nd class hard wood two panel with lock rail and panel of 9mm thick BWP commercial ply ,the size of rail and style as per IS : 1003 Part-I, Kiln seasoned and chemically pressure treatedfactory made shutters wood is to be incorporated all as complete all as specified and directed. |
| 18 | M&L for 3.00 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n. exc. 0.50 sqm in each pane complete all as specified and directed. |
| 19 | S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 20 | S & F in repairs stainless steel curtain rod 20/25mm dia with fixing side brackets, end cups, and fixed with PVC rawl plugs & steel screws complete all as specified and directed. |
| 21 | M & L for Preparation of New steel surfaces of any description and in any position over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of redoxide primer.complete all as specified and directed. |
| 22 | M&L preperation of new or previously untreated surfaces of wood or based materials of any description not otherwise described over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of pink primer comlplete all as spd and as directed. |
| 23 | S&F 150 mm size extruded aluminium door handles fabricated type ISI Marked complete all as specified and directed. |
| 24 | S&F Aluminum anodized barrel tower bolt of extruded section 200mm long ISI Markedcomplete all as specified |
| 25 | S & F Mild steel sliding door bolts,plate type,stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate and fixed.(250mm length of bolt) |
| 26 | M&L for 15 mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes complete all as specified and directed. |
| 27 | M & L for non skid ceramic coloured /printed tiles of area exc 0.11 sqm and n.exc 0.18 sqm, 6 to 7 mm thick, in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the tiles. Overlaid including 10 mm thick rendering in CM 1:4 as beding coat for fixing of tiles complete all as specified and directed. |
| 28 | M&L for rendering to brick/ Stone wall surfaces, 10mm thick in cement mortar 1:4, as backing coat for scoured for fixing tiles /stone slabs etc to complete all as specified & directed |
| 29 | M&L for glazed ceramic coloured / printed tiles 350mm x 250mmx7mm/450mmx350mmx7mm thick, as in skirting/ dado set and jointed in neat cement slurry and pointed in white/coloured cement to match the tiles. (Screed bed shall be measured and paid for separately) |
| 30 | S&F in repair vitreous china ware wash hand basin 550mm x 400 mm size flat back or angle including new bracket and making good all connections in repairs complete all as directed by the Engr-in-Charge. |
| 31 | S&F in repair 32mm Dia PVC waste pipe for sinks or wash basines etc complete all as directed by the Engr-in-Charge. |
| 32 | S&F in repair 32 mm dia bore waste fittings brass chromium plated fixed to wash hand basin/urinals with long screwed shanks and fly nuts flange and bedded in run lead cement and other end fixed complete all as directed by the Engr-in-Charge. |
| 33 | S&F in repair Bib taps, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15mm dia and fixed complete all as specified and directed |
| 34 | S&F in repair 15 mm bore piller cocks tall fancy type,cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts. complete all as specified and directed |
| 35 | S&F in repair 15mm bore angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed |
| 36 | S&F PVC connection 15 mm bore LDPE pipe 45cm long with brass nuts and washers on both ends complete all as specified and directed |
| 37 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, and fixed to wall with chromium plated screw studs complete all as specified and directed. |
| 38 | S&F in repair Vitreous China squatting pan of pattern “Orissa pattern”, size 580x440 mm white with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern n including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor (excluding flushing cistern and flush pipe) |
| 39 | S & F 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceable cistern complete all as specified and directed. |
| 40 | S&F in repairs Towel Rail 600mm long 20mm dia,D type cromium plated, fixed with and including Chromium plated brass screws and wooden/plastic cleats. and fixed complete all as specified and directed |
| 41 | S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet galss shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long |
| 42 | S&F in repairs steel water tubing 20mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls and ceilings or laid in floors complete all as specified and directed |
| 43 | S & F 1000 Ltrs capacity Rotational moulded, polythene water storage tanks (cylindrical shape with vertical top closed) hoisted and fixed in position including taking down existing in any position all as specified and directed. |
| 44 | Supply and fix solid PVC door frame of size 50 mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification complete all as specified and as directed by the Engineer-in-Charge |
| 45 | Supply and fix 30 mm thick factory made PVC rigid frame panel door shutter made from MS tubular frame of gauge 19 x 19 mm style and 15 mm x 15 mm top and bottom rails MS frame to be covered with 5 mm thick heat moulded PVC 'C' channel of size 50mm x 30mm for stiles with 5mm thick PVC sheet (50 mm wide for top rail, 75 mm wide for lock rail and bottom rail on either side). Paneling of 5 mm thick PVC sheet to be fitted in the MS frame, sealed to the styles and rails with 25 mm thick PVC sheet beading on either side and joined together with cement solvent adhesive complete all as specified and as directed by the Engineer-in-Charge |
| 46 | M&L for Vitrified light shade ceremic tiles 8 to 9mm thick (Square/rectangular) polished area of each tile not exceeding 0.36Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in cement mortar 1:6, complete all as specified & directed. |
| 47 | M&L for Vitrified light shade ceremic tiles 8 to 9mm thick (Square/rectangular) polished area of each tile not exceeding 0.36Sqm in skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10 mm thick rendering in cement mortar 1:4, complete all as specified & directed. |
| 48 | M&L for preparation of old surfaces of walls of any description including complete removal , washing down, rubbing, brooming down , scrapping down with mechnical sander having mechnical vaccume machanism ,smoke, roots, moulds, salts and treading oil and greasy spots, including taking down existing grass, vegetation, small trees and making good the disturbed surface with cement mortar 1:3 and applying one coat of cement based paint, white or tinted, curing before and after paint complete all as specified and directed. |
| 49 | Dismantling timber scantlings 40 sq cm & over in section, in any position complete all as specifed and directed. |
| 50 | S & F rolled MS section as in roof trusses (framed), trussed, purlins, verticle members of sheds, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc fixed with angle cleats or other connecting plates confirming to Fe 410-W quality B , including taking down complete all as specifed and directed. |
| 51 | Dismantling structural steel work including doors, gates but excluding framed truss complete all as specified and directed. |
| 52 | M&L for Joist, channel, angle, or tee sections,Fe-410-W(GdeE-250)quality fixed independently, with or without connecting plates,in roof,wall etc all as specified. |
| 53 | Demolition of cement concrete in ground floors and paving n exc 15 cm thickness (below or above ground level) |
| 54 | Demolition of Stone slabs and tiles of any description or thickness in floors or walls, aprons etc complete all as specified and as directed |
| 55 | Providing, cement concrete type C1 1:3:6 (using 20mm graded aggregate as in roof kerbs or mud stops and plinth protection rounded or chamfered on edges complete all as specified and directed. |
| 56 | M & L 40 mm thk cement conc. Type B-0 1:2:4 (12.5mm graded crushed stone aggregate) as in sub base to floor complete. |
| 57 | M&L for 100 mm PCC cement concrete type D-2 1:4:8 (using 40mm graded aggregate) as in sub base complete all as specified |
| 58 | M&L for providing cement concrete1:2:4 (Cast in situ) type B-I (using 20mm graded aggregate) as in kerbs rounded or chamfered on edges including necessary excavation and formwork,complete all as specified and directed by Engr-In-charge. |
| 59 | M&L for machine cut kota stone slab flooring 20-25 mm thick over&including 15mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing complete . |
| 60 | Demolition of brick work or stone/ boulder/PCC block masonry, built in cement mortar including all quoins, pillars etc.complete all as specified |
| 61 | M&L for .Pre-cast cement concrete block masonry type C-1 1:3:6 (using 16mm graded stone aggregate) with solid blocks exc. 10 cm in width and setting in mortar 1:6 , complete all as specified and directed. |
| 62 | M&L Rendering 15 mm thick on fair face of brick work or concrete surfaces in CM 1:4 including taking down where ever required, is to be finished even and smooth (with out using extra cement) complete all as directed |
| 63 | M&L for preparing of new plastered surfaces and applying two coats of cement based paint over a coat of primer on walls all as specified & directed by the Engr-in-Charge. |
| 64 | Taking down chowkats or frame with shutters ( without taking off shutter from frame ) n exc 1.50Sqm each. |
| 65 | Taking down chowkats or frame with shutters ( without taking off shutter from frame ) 1.50Sqm and n exc 4.0 Sqm each complete all as specified and directed. |
| 66 | S&F Pressed steel windows (hollow section) with side hung shutters including projecting type hinges with steel handle,and steel peg stay and 02 Nos tower bolt in each leaf complete with glazing bars dovetailed or welded complete all as specified and directed. |
| 67 | S&F Steel door including projecting type hinges, steel handle, complete,with glazing bars,locking arrangements, dovetailed or welded complete all as specified. |
| 68 | S&F 4 mm thick, sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each pane. |
| 69 | S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified. |
| 70 | S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 71 | M&L preparing new or previously untreated iron surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint over a coat of red oxide primer all as specified & directed by the Engr-in-Charge. |
| 72 | M&L for chequered cement concrete tiles 20cm x 20cm x 20-25mm thick, including 15mm thick screed bed in CM 1:6 set, jointed and pointed in neat cement slurry and filling of joints with grey pigment cement and pigmants in floors complete all as specified and directed. |
| 73 | M&L for sand filling under floors including watering and consolidation to receive interlocking tiles complete all as specified and as directed. |
| 74 | M&L Machine pressed precast conctete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 incl removal of existing all as specified and directed. |
| 75 | M & L 40 mm thk cement conc. Type B-0 1:2:4 (12.5mm graded crushed stone aggregate) as in sub base to floor complete. |
| 76 | Taking down chowkats or frame with shutters ( without taking off shutter from frame ) n exc 2.50Sqm each. |
| 77 | Taking down shutter of any description exc 1 sqm but n.exc 2sqm each complete all as specified and directed. |
| 78 | S&F 2nd class HW plain solid straight chowkhats/frame wrought framed rebated on the solid, rounded or chamferred put together with glue pinned at joints complete all as specified and directed. |
| 79 | S&F 35mm thick 2nd class HW plain framed panelled shutters (any numbers of panel) with panels of 12mm thick particle board (PF bonded BWP type)/Plywood with commercial veneered facing on both sides and fitted to chowkhats or frames complete all as specified. |
| 80 | S & F Mild steel barrel tower bolts,stove enamelled black with bright bolt and fixed (150mm length of bolt) |
| 81 | S & F Mild steel sliding door bolts,plate type,stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate and fixed.(250mm length of bolt) |
| 82 | S & F butt hinges heavy weight cold rolled mild steel and fixed (100mm) |
| 83 | S & F butt hinges heavy weight cold rolled mild steel and fixed (75mm) |
| 84 | S & F mild steel handles, (150mm) complete all as specified. |
| 85 | M&L preparation new or previously untreated wood surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 86 | M&L for cement concrete in foundation,filling and mass concrete type D2 1:4:8(using 40mm graded aggregate)complete all as specified and directed. |
| 87 | M&L for .Pre-cast cement concrete block masonry type C-1 1:3:6 (using 16mm graded stone aggregate) with solid blocks exc. 10 cm in width and setting in mortar 1:6 , complete all as specified and directed. |
| 88 | M&L preparation of new surfaces of walls including cornices and applying two coats of oil bound distemper over a coat of primer, white or tinted over 1.5mm thick wall care putty all as specified & directed by the Engr-in-Charge. |
| 89 | Providing precast cement concrete 1:2:4 type B1(using 20mm graded aggregate) in, lintels, complete all as specified. |
| 90 | M&L preparing old painted steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint all as specified & directed by the Engr-in-Charge. |
| 91 | Taking down carefully copper/ aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceilling roses, pendants , regulators, sockets light fitting etc for taking credit removing from site and making good disturbed surface etc. |
| 92 | Material and labour for point wiring with 1.5 sqmm cable FRLS PVC insulated, unsheathed copper multistranded conductor, 1100 V grade of size 1.5 sqmm including necessary termination board 1.5 Sqmm PVC insulated unsheathed FRLS copper conductor as earthing and connected to common earthing with PVC heavy duty casing caping/PVC conduit ISI marked as rquired at site along with all accessories and making good the disturbed surfaces of wall/ ceiling etc for the following : - |
| 93 | One light point/ one fan point/ Bell Point controlled by one switch |
| 94 | One 3 pin socket outlet, 5 Amp independent |
| 95 | Supply and Fix switch piano flush type single pole one way 5 Amps all as specified |
| 96 | Supply and Fix switch socket combination multi purpose, 5 amp all as specified |
| 97 | S & F Ceiling rose 3 plates flush type 6 Amps,250 volts AC ISI marked |
| 98 | All as per item No 92 above but for point wiring for power point with 2.5 Sqmm FRLS PVC insulated unsheathed copper cable 1100 Volt grade drawn through and including PVC casing caping heavy duty ISI marked /heavy duty conduit ISI marked as required at site alongwith accessories with 2.5 Sq mm FRLS PVC insulated unsheathed copper conductor cable as earthing and connected to common earth all as specified. |
| 99 | S & F switch socket combination switch socket outlet 3 pin, 16 amp flush type |
| 100 | S&F in repair wall mounted LED light fitting 1x20 watts AC decorative box type with driver holder including LED tube light , energy efficient type 4 feet long including neccessary conection prewired and making connection with 3 core copper flexible cable of appropriate size from ceilling rose. |
| 101 | Supply and fix in repair sheet metal enclosure SPN DB 08 way,single phase 240 volts double door with 200 amp rated bus bar complete all as directed. |
| 102 | Supply and fix in repair main Circuit breaker single pole, 6 to 32 Amp (MCBSP) 240 volt C curve 10 KA, IP 20 complete all as specified and directed. |
| 103 | M&L in repair maint Circuit breaker single pole & neutral (MCBSPN) 240 volt C curve 10 KA 32 Amps capacity IP 20 complete all as specified and directed. |
| 104 | Supply and fix in repair sheet metal enclosure SPN DB 02 way,single phase 240 volts single door with 200 amp rated bus bar complete all as directed. |
| 105 | S&F in repairs LED security light fitting 35 watts 230 volts AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver,lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. |
| 106 | S&F in repairs two single core 2.5 sqmm for sub Main wiring with copper conductor multistranded PVC insulated and unsheathed 1100 Volts grade in and including PVC casing capping with fixing accessories including one run of 2.5 Sq mm copper conductor. (Note - Two runs of 2.5 Sq mm cable, one run of 2.5 Sq mm earth cable and one run of PVC casing Capping shall be measured as one running meter.) |
| 107 | Excavation in trenches not exceeding 1.5m in depth deep for laying of pipe, cable, foundation of electric pole etc and getting out in hard soil, complete all as specified. |
| 108 | Returning, filling in including spreading leveling watering and well ramming in layers not exc. 25 cm thick complete all as specified and directed.(Surplus soil if any shall not be removed but left over the trench) |
| 109 | Removing surplus soil to a distance not exc. 50 M and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed. |
| 110 | Supply and laying double walled corrugated HDPE Pipes of size 40 mm dia as per IS 16205 Anti termite, Anti Rodency and Non flame propagation propety etc for protection of LT/HT cables complete all as specified and directed. |
| 111 | Supply laying and testing XLPE in replacement cable insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables heavy duty 1100 volts grade with stranded aluminium conductor of size 16 sqmm 2 core. |
| 112 | Material and labour earthing complete with galvanized steel earth plate 60 cm x 60cm x 6.0mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less less than 1.5 mtr filled around with 15 cm thick alternate layers of charcoal dust and salt and connected to earth lead wire 4mm dia (8 SWG) by means of bolt, nut and check nuts and washers of galvanized iron or steel and thimble and other ends of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15mm bore and watering pipe 20mm dia light grade with funnel and wire mesh, pcc 1:3:6 type C-1 in chambers RCC 1:2:4 type B-1 in pit cover reinforced with 8 mm dia deformed bars 15cm center to center both ways all as directed by Engr-In-Charge, complete all as shown in electric plate No 3 of MES SSR Part I |
| 113 | S&F in repair two single core 6 sq mm for sub Main wiring with copper conductor multistranded PVC insulated and unsheathed 1100 Volts grade in and including PVC casing capping with fixing accessories including one run of 6 Sq mm copper conductor. (Note - Two runs of 06 Sq mm cable, one run of 6 Sq mm earth cable and one run of PVC casing Capping shall be measured as one running meter.) |
| 114 | Deduct Credit for Demolished/Dismantled material Rs (-) 76984.65 (Minus) as listed in Schedule 'A' Part-II (Credit Schedule)Note : Tenderers will not quote against this item being a tentative amount, to be considered to arrive at the 'Contract Sum'. Please Enable Macros to View BoQ information |
