|
| 1 | M&L for Machine cut kota stone slab flooring 18-20mm thick over 20 mm cement screed base CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing polishing and rounded or chamfered for nosing complete all as per specified |
| 2 | Demolition of cement concrete (unreinforced) in ground floor any type and any position and paving including PCC tiles any type n exc (below or above GL) 15 cm complete all as specified. |
| 3 | M&L for 75mm thick, cement concrete, type C-2, 1:3:6 (40 mm graded stone aggregate) as in floors & pavings, plinth protection, path, etc. finishing top surface even and Smooth with using extra cement complete all as specified. |
| 4 | M&L for 25 mm Plain cement concrete type B1 1:2:4 (using 20mm graded aggregate) in floor as PCC padding for tiling etc complete all as specified |
| 5 | Dismantling wall and ceilling boards of any description including cover fillets complete. |
| 6 | M & L for 9 mm thick Prelaminated Partical Board interior grade prelamination one side & other side balancing white lamination fixed with nails to timber frame work as in ceiling. |
| 7 | M & L for 11 to12 mm thick Prelaminated Partical Board interior grade prelamination one side & other side balancing white lamination fixed with nails to timber frame work as in wall. |
| 8 | Dismantling timber fillets, rails, posts rafter purlins under 40 Sqcm in sectional area. complete all as specified |
| 9 | S&F 2nd class HW plain fillets Square rectangular/triangular in section clean sawn secured with nails sec area exc 6 & n.exc 13 sqcm complete all as specified and directed. |
| 10 | S&F 2nd cl HW plain fillets square rectangular, triangular in section wrought with nails sectional area exc. 3 and n.exc 6 sqcm complete all as specified and directed. |
| 11 | S&F 2nd cl HW plain fillets square rectangular, triangular in section wrought with nails sectional area n'exc. 3 Sqcm as in beadings complete all as specified and directed. |
| 12 | Dismantling of plain/corrugated steel sheeting any gauge, thickness in roof covering complete all as specified and directed. |
| 13 | M&L for Pre painted galvalume aluminium Zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 14 | M&L for Pre painted galvalume aluminium Zinc coating GI based plain steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in Ridges/ Valley roof covering /cladding etc to wall fixed with self tapping screws complete all as specified and directed. |
| 15 | Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm each complete all as specified and directed. |
| 16 | S& F second class hard wood plain, solid straight chowkats and frame, wrought framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints including making good disturbed surfaces of wall complete all as specified and directed |
| 17 | S&F 35mm thick second class hard wood plain framed panelled shutters (any number of panels ), with panels of timber flat on both sides (feather edge), or of veneered particle board medium density wood particle board with commericial face veneers and fitted to chowkats. |
| 18 | S&F 30mm thick second class hard wood glazed and skelton shutters,open rebated and prepared to receive glass gauze,etc (without sash bars),edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) fitted to chowkat. |
| 19 | S&F in repair 25mm dia stainless steel Curtain/ Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers and side decorative knobs etc complete all as specified and directed by Engineer-In-Charge. |
| 20 | S&F 3mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm complete all as specified. |
| 21 | S & F Galvanised mild steel wire cloth 0.48 mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified |
| 22 | S &F in repair to 3mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads, in squares n.exc 0.50 Sqm incl. including hacking out old broken glass and putty/beading complete all as specified. |
| 23 | S &F in repair Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified |
| 24 | M&L for Preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified. |
| 25 | M&L for preparation of old Steel or Steel based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 26 | S&F 150mm long aluminium, anodised barrel tower bolts of extruded section, all as specified and as directed by the Engr-in-charge. |
| 27 | S&F 100mm Extruded aluminium alloy handle all as specified and as directed by the Engr-in-charge. |
| 28 | S&F Aluminium alloy, anodised, sliding door bolt 250mm length,with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified. |
| 29 | S&F of Powder coated of ( any colour ) aluminium window, Door , ventilator etc fixed / sliding hang or hinges or pull and push type in shutter frames or shutters with two/three track sliding aluminium frame of Jindal /Hindalco (or) Equivalent make of approved size, including necessary joining cleats, glazing clips,powder coated aluminium snap beading, screws, including necessary anodised aluminium fittings like tower bolts, hinges, sliding bolt, handles etc complete all as specified as per manufacturers instructions.Note: EPDM Rubber beading/glass measured and paid seperatley. |
| 30 | S&F Rubber beading as standered around glass in aluminium windows /ventilator/doors shutters complete all as specified. |
| 31 | S&F in repair Aluminium body hydraulically regulated Door closer universal type, suitable for door shutters of 851 to 1000 mm in width & of weight between 61 to 80kg complete all as specified and directed. |
| 32 | Demolition of PCC as in block walling built in cement mortar complete all as specified. |
| 33 | M&L for pre cast PCC (1:3:6) type C1 (using 20mm graded agg) solid block masonry exc 10cm in width or girth and setting CM (1:6) complete all as specified and directed. |
| 34 | M&L for 15mm thick rendering in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished even and fair (without using extra cement) including Preparation of new plastered surfaces and applying two coats of cement base paint complete all as specified and directed by Engr-In-Charge.. |
| 35 | M&L for 60 mm thick Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006, M-35Grade with grey cement and with pigment used, excluding laying of sand cushioning complete all as specified and as directed.Note :- Sand will be measured and paid seperately |
| 36 | M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. |
| 37 | M&L for 100 mm thick PCC cement concrete type D-2 1:4:8 (using 40mm graded aggregate) as in sub base complete all as specified |
| 38 | S&F 600mmX450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board of commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers with alround aluminium beading as fixed in repairs and all as specified and directed by Engineer-in- charge |
| 39 | S&F in repair 15mm bore stop valves/ angle valve CP of cast copper alloy, screwed down, high pressure with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup complete all as specified. |
| 40 | S&F in repair 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified. |
| 41 | S&F Wash hand basin, flat back 550x400mm vitreous china (white) including 32 mm bore CP waste fittings,waste pipe PVC 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified. |
| 42 | S&F in repair CP Bib tap, 15mm bore, screwed down, screwed for iron pipe or for brass ferrule complete all as specified. . |
| 43 | S&F in repair aluminium anodised 20mm dia towel rail fixed with brackets at its ends as fixed complete all as specified and directed. |
| 44 | S&F in repair Rotational moulded Polyethylene water storage tank of 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position including 20mm PVC float valve high pressure with polythene float valve complete all as specified and as directed. (Make : Sintex, Sheetal, Polycon or equivalent) |
| 45 | S&F in repair Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified |
| 46 | S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches including taking down eaves gutters and rain water pipes (any size or pattern),including all fittings heads shoes bends swan-necks etc complete all as specified and directed. (Make: Supreme/ Finolex or equivalent) |
| 47 | S&F 75mm dia PVC (SWR)with access door bends any radius complete all as specified. |
| 48 | S&F in repair gunmetal gate valve of 20mm dia with iron wheel head screwed both ends for iron pipe and as fixed in repairs complete all as specified.. |
| 49 | Taking down GI/PP-R tubing 20mm dia and connection including removable to store complete all as specified and directed. |
| 50 | S&F 20mm outer dia, 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. all as specified |
| 51 | M&L for cement concrete in foundation,filling and mass concrete type D2 1:4:8(using 40mm graded aggregate)complete all as specified and directed. |
| 52 | M&L for non skid ceramic tiles 7 to 8 mm thick area of each tiles exc 0.11 sqm but n.exc 0.18 sqm (coloured tiles) in floor, set & jointed in neat cement slurry, pointed,in white or coloured cement to match, over and including 15mm thick screed bed in CM 1:6 including dismantling complete all as specified and directed. |
| 53 | M&L for glazed ceramic tiles coloured (350 x 250 x 7/450x350/300x450x7 to 8mm thick) on walls,incl highlighter tiles as if reqd set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including rendering 10mm thick on fair faces with CM (1:4)and including dismantling complete all as specified and directed. |
| 54 | M&L for wooden floor tiles of size 1200 x 200 mm and 7 mm thick with dove tailed joints laid over 3mm thick foam as per manufacturers instructions including taking down of old wooden flooring any type and fixed with decorative wooden beadings as per site requirement complete all as specified and directed by Engr-in-charge, complete. |
| 55 | M&L for rendering in CM (1:4) 15mm thick on brick/concrete surfaces finished even and smooth without using extra cement |
| 56 | M&L Preparation of newly plastered surfaces and applying two coats of oil bound distemper, over a coat of primer including one coat of wall care birla putty 1 mm thick plastered on surfaces of walls complete all as specified and as directed. |
| 57 | Demolition of reinforced concrete in ground floors and paving n exc 15 cm thickness (below or above ground floors ) complete all as specified and directed. |
| 58 | M&L for RCC Type B1 1:2:4 using 20mm graded aggregate as Roof Beams, cantilevers, bressummers, lintels over 1.5m span complete all as directed |
| 59 | M&L for formwork to sides and soffits of floor or roof beams, lintels, lintel beams cantilevers, shelves including supports, etc complete all as specified. |
| 60 | M&L TMT bars 10 mm dia and over ,cut to length bent to shape required incl cranking, bending, spirally hooping for columns and binding with MS wire (annealed) not less than 0.90mm dia wire etc complete. |
| 61 | All as per item No 60 above but 8 mm dia TMT bars. |
| 62 | Dismantling wrought iron or mild steel work of any description complete all as specified. |
| 63 | M&L for rolled mild steel in joist channel,angle or tee section, fixed independently, without connecting plates etc. (cut to ordinary lengths i.e. within 20 mm of the length indicated) as in desert cooler stands and all other similar works conforming to Fe -290 (Gde- E-165) complete all as specifed and directed. |
| 64 | Taking down shutters of any description exc 1 sqm and nexc 2 sqm each complete all as specified |
| 65 | Taking down chowkats or frame with shutters ( without taking off shutter from frame ) exc 1.50Sqm but n exc 4 sqm each. |
| 66 | Supply and fixing factory made uPVC white colour double fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made |
| 67 | Supply and fixing factory made uPVC double glazed white colour Two track two panels sliding window above 1.50 m height made of (big series) fram 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 + 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of window above 2.50 sqm. upto 4.00 sqm.) comprising of uPVC multi chambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads, uPVC extruded interlocks and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle on one side of extreme panel along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) touch lock with hook (if required for wire mesh panel), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 68 | Supply and fixing 18 mm thick UV board duly edge banded with 0.8 mm thick PVC taping fitting of shutters shall be fixed with and including hinges/screw cermaika, design and colour as approved by GE suitable for door frame etc including taking down with existing one. |
| 69 | S&F 35mm thick 2nd class HW plain framed panelled shutters (any numbers of panel) with panels of 12mm thick particle board (PF bonded BWP type)/Plywood with commercial veneered facing on both sides and fitted to chowkhats or frames complete all as specified. |
| 70 | S&F 200mm size MS barrel tower bolt stove enamelled black with bright bolt complete all as specified and directed. |
| 71 | S&F 150mm size MS pressed handle oval type stove enameled block complete all as specified and directed. |
| 72 | M&L for preparation of old surfaces of walls of any description including complete removal , washing down, rubbing, brooming down , scrapping down with mechnical sander having mechnical vaccume machanism ,smoke, roots, moulds, salts and treading oil and greasy spots, including taking down existing grass, vegetation, small trees and making good the disturbed surface with cement mortar 1:3 and applying one coat of cement based paint, white or tinted, curing before and after paint complete all as specified and directed. |
| 73 | M&L Complete removal of existing treatment on surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot , moulds moss and efflorosent salts , trading oil and greasy spots and applying two coats of oil bound distemper, over a coat of primer including chalk whitening on old plastered surfaces of walls including preparatory to distempering complete all as specified and as directed. |
| 74 | S&F in repair vitreous china ware counter top wash hand basin 410mm x 365 mm x185mm size incl waste fitting as per manufacturers specification complete and making good all connections in repairs complete all as directed by the Engr-in-Charge.Make: Parryware cat part No C0462 or equivalent as spproved by GE |
| 75 | S&F in repairs 32mm Dia PVC waste pipe for sinks or wash basines etc,complete all as directed by the Engr-in-Charge. |
| 76 | S&F in repair 15 mm bore high neck piller cocks fancy type,cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts.Make : Parryware cat part No T4264A1 or equivalent as approved by GE |
| 77 | S&F in repair Bib taps long body cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15mm dia and fixedMake:Parryware cat part No G4005A1 or equivalent as approved by GE |
| 78 | S&F in repairs15mm bore angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed .Make:Parryware cat part No G4707A1 or equivalent as approved by GE |
| 79 | Supply and fix in repairs PVC connection15 mm bore LDPE pipe 45cm long with brass nuts and washers on both ends complete all as specified and directed. |
| 80 | S&F in repair Vitreous china urinal,white size 380x400x590mm including spreader complete all as specified.Make : Parryware Cat No :C0583(Combo set) or equivalent |
| 81 | S&F in repairs rim less syphonic vaccume western floor mounted water closet pan (Single piece suit),of size 740x350x660mm white incl seat cover as per manufacturers specification complete all as specified and directed.Make:Parryware cat part No:C8901/C8902 or equivalent as approved by GE |
| 82 | S&F in repair Towel Rack 600mm long 20mm dia,D type cromium plated, fixed with and including Chromium plated brass screws and wooden/plastic cleats. and fixed all as specified and directed.Make:Parryware cat part No T6008A1 or equivalent as approved by GE |
| 83 | S&F Toilet paper holder with cover complete all as specified and directed Make:Parryware cat part No T6514A1 or equivalent as approved by GE |
| 84 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 85 | S&F Two way bib cock chromium plated fancy type complete all as specifiedMake:Parryware cat part No G2381A1 or equivalent as approved by GE complete all as specified. |
| 86 | S&F sheet glass shelf assembly consisting of 5.5 mm thick sheet galss shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified. |
| 87 | S &F 75 mm dia PVC (SWR) floor trap plain with grating doom with or without hole as directed including jointing to waste pipe fixed in solvent cement or cement concrete 1:2:4 type B1 complete all as specified and directed. |
| 88 | Demolition/Dismantling of drain pipes any type at any position complete all as specified and directed. |
| 89 | S &F 75mm bore PVC(SWR) Pipes single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed. |
| 90 | S &F 110mm bore PVC(SWR) Pipes sinle socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed. |
| 91 | S &F 75mm bore PVC(SWR) bend complete all as specified and directed. |
| 92 | S &F110mm bore PVC(SWR) bend complete all as specified and directed. |
| 93 | Supply and fix steel water tubing 20mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls and ceilings or laid in floors including taking down all as specified and directed. |
| 94 | Dismantling structural steel work including doors, gate,framed truss complete all as specified and directed. |
| 95 | M&L for Joist, channel, angle, or tee sections,Fe-410-W (GdeE-250) quality fixed independently/ framed, with or without connecting plates,in roof,wall etc complete all as specified. |
| 96 | M & L 40 mm thk cement conc. Type B-0 1:2:4 (12.5mm graded crushed stone aggregate) as in PCC padding of floor complete all as specified. |
| 97 | S&F Pressed steel windows (hollow section) with side hung shutters including projecting type hinges with steel handle,and steel peg stay and 02 Nos tower bolt in each leaf complete with glazing bars dovetailed or welded complete all as specified and directed. |
| 98 | All as per item No 97 above but without glazing bars |
| 99 | Framed work such as grills grating etc with ends of bars shouldered and /or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walk way railings framework of water tanks and similar work conforming to Fe 290 Gde-E-165. |
| 100 | Hacking out old broken glass (any thickness, size, quality) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified. |
| 101 | S&F Steel door including projecting type hinges, steel handle, complete,with glazing bars,locking arrangements, dovetailed or welded complete all as specified. |
| 102 | S & F Mild steel barrel tower bolts,stove enamelled black with bright bolt and fixed (150mm length of bolt) complete all as specified. |
| 103 | S & F butt hinges heavy weight cold rolled stainless steel and fixed (100mm) complete all as specified. |
| 104 | S&F 4 mm thick, sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each pane. complete all as specified. |
| 105 | M&L preparing new or previously untreated iron surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint over a coat of red oxide primer all as specified & directed by the Engr-in-Charge. |
| 106 | Providing, 75 mm thick cement concrete type C1 1:3:6 (using 20mm graded aggregate as in roof kerbs or mud stops and plinth protection rounded or chamfered on edges complete all as specified and directed. |
| 107 | M & L Chequered cement concrete tiles 30cm x30cm x 25mm thick,set, jointed and pointed in neat cement slurry in floors with grey cement 7 White Pigment over and including 15 mm thick screed bed in CM 1:6 Complete all as specied |
| 108 | Taking down carefully copper/ aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceilling roses, pendants , regulators, sockets light fitting etc for taking credit removing from site and making good disturbed surface etc. |
| 109 | Material and labour for point wiring with 1.5 sqmm cable FRLS PVC insulated, unsheathed copper multistranded conductor, 1100 V grade of size 1.5 sqmm including necessary termination board 1.5 Sqmm PVC insulated unsheathed FRLS copper conductor as earthing and connected to common earthing with PVC heavy duty casing caping/PVC conduit ISI marked as rquired at site along with all accessories and making good the disturbed surfaces of wall/ ceiling etc for the following : - |
| 110 | One light point/ one fan point/ Bell Point controlled by one switch |
| 111 | One 3 pin socket outlet, 5 Amp independent |
| 112 | Supply and fix switch piano flush type single pole one way 5 Amps all as specified |
| 113 | Supply and fix switch socket combination multi purpose, 5 amp complete all as specified. |
| 114 | S & F Ceiling rose 3 plates flush type 6 Amps,250 volts AC ISI marked |
| 115 | All as per item No 109 above but for point wiring for power point with 2.5 Sqmm FRLS PVC insulated unsheathed copper cable 1100 Volt grade drawn through and including PVC casing caping heavy duty ISI marked /heavy duty conduit ISI marked as required at site alongwith accessories with 2.5 Sq mm FRLS PVC insulated unsheathed copper conductor cable as earthing and connected to common earth all as specified. |
| 116 | S & F switch socket combination switch socket outlet 3 pin, 16 amp flush type |
| 117 | S&F in repair wall mounted LED light fitting 1x20 watts AC decorative box type with driver holder including LED tube light , energy efficient type 4 feet long including neccessary conection prewired and making connection with 3 core copper flexible cable of appropriate size from ceilling rose. |
| 118 | Supply and fix in repair sheet metal enclosure SPN DB 08 way,single phase 240 volts double door with 200 amp rated bus bar complete all as directed. |
| 119 | Supply and fix in repair for Circuit breaker single pole, 6 to 32 Amp 240 volt C curve 10 KA, IP 20 complete all as specified and directed. |
| 120 | M&L in repair for Circuit breaker single pole & neutral 240 volt C curve 10 KA 32 Amps capacity IP 20 complete all as specified and directed. |
| 121 | Supply and fix in repair sheet metal enclosure SPN DB 02 way,single phase 240 volts Single door with 200 amp rated bus bar complete all as directed. |
| 122 | Supply and fix in repair sheet metal enclosure SPN DB 04 way,single phase 240 volts double door with 200 amp rated bus bar complete all as directed. |
| 123 | S&F LED security light fitting 35 watts 230 volts AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver,lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. |
| 124 | S&F two single core 2.5 sqmm for sub Main wiring with copper conductor multistranded PVC insulated and unsheathed 1100 Volts grade in and including PVC casing capping with fixing accessories including one run of 2.5 Sq mm copper conductor. (Note - Two runs of 2.5 Sq mm cable, one run of 2.5 Sq mm earth cable and one run of PVC casing Capping shall be measured as one running meter.) |
| 125 | S&F in repair two single core 6 sq mm for sub Main wiring with copper conductor multistranded PVC insulated and unsheathed 1100 Volts grade in and including PVC casing capping with fixing accessories including one run of 6 Sq mm copper conductor. (Note - Two runs of 06 Sq mm cable, one run of 6 Sq mm earth cable and one run of PVC casing Capping shall be measured as one running meter.) |
| 126 | Excavation in trenches not exceeding 1.5m in depth deep for laying of pipe, cable, foundation of electric pole etc and getting out in hard soil, complete all as specified. |
| 127 | Returning, filling in including spreading leveling watering and well ramming in layers not exc. 25 cm thick complete all as specified and directed.(Surplus soil if any shall not be removed but left over the trench) |
| 128 | Removing surplus soil to a distance not exc. 50 M and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed. |
| 129 | Supply and laying double walled corrugated HDPE Pipes of size 40 mm dia as per IS 16205 Anti termite, Anti Rodency and Non flame propagation propety etc for protection of LT/HT cables complete all as specified and directed. |
| 130 | Supply laying and testing cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables heavy duty 1100 volts grade with stranded aluminium conductor of size 16 sqmm 2 core. |
| 131 | Material and labour earthing complete with galvanized steel earth plate 60 cm x 60cm x 6.0mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less less than 1.5 mtr filled around with 15 cm thick alternate layers of charcoal dust and salt and connected to earth lead wire 4mm dia (8 SWG) by means of bolt, nut and check nuts and washers of galvanized iron or steel and thimble and other ends of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15mm bore and watering pipe 20mm dia light grade with funnel and wire mesh, pcc 1:3:6 type C-1 in chambers RCC 1:2:4 type B-1 in pit cover reinforced with 8 mm dia deformed bars 15cm center to center both ways all as directed by Engr-In-Charge, complete all as shown in electric plate No 3 of MES SSR Part I |
| 132 | S&F warm white/ white LED luminaire 600X600 mm,35/36 watt,220V recessed type lumen output >= 122 lumen per watts , THD < 10% environmental friendly , new generation , aesthetically designed , ultra modern with high brightness SMD LEDs as light source incl inbuilt drivers with high efficiency PMMA diffuser soft glare free light complete suitable for roof ceiling including connecting up with three core flexible copper conductor of suitable size all as specified and directed. |
| 133 | S&F in replacement sheet metal enclosures distribution boards,double door 4 way three phase 415 volts MCCB,ISOLATOR&MCB,s comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed and comprising of the following (a) MCCB 4 Pole 100 AMPS AC 415 V 25 KA=01 NO as incoming & outgoing MCB SP-12 No 10-16 AMP (Note :- (i)The DB shall be of VTPN series (ii) The DB shall be flush fixed ,and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost.(iii)connection of theMCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble -properly crimped.(1v) all the vacant holes of the DB shall be provided with blank plates of appropriate size. (v) double continuous earth wire shall be provided for each three phase DB from earthing mains dolly. |
| 134 | Deduct Credit for Demolished/Dismantled material Rs (-) 128153.00 (Minus) as listed in Schedule 'A' Part-II (Credit Schedule)Note : Tenderers will not quote against this item being a tentative amount, to be considered to arrive at the 'Contract Sum'. Please Enable Macros to View BoQ information |
