|
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth 1:3:6 (1 Cement : 3 coarse sand (zone-lll) derived fromnatural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 2 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 3 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 4 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete. |
| 5 | 15 mm cement plaster on rough side of single or half brick wall of mix 1:6 (1 cement: 6 coarse sand) |
| 6 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre |
| 7 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 8 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 9 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 10 | Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge.(a) Internal Work- Exposed on wall |
| 11 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge Nominal concrete 1:3:6 or richer mix (including equivalent design mix) |
| 12 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead For thickness of tiles 10 mm to 25 mm |
| 13 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 14 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.(a) 15 mm nominal dia |
| 15 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete Flexible pipe 32 mm dia |
| 16 | Providing and fixing mirror of superior glass (of approved quality) and ofrequired shape and size with plastic moulded frame of approved make andshade with 6 mm thick hard board backing : Circular shape 450 mm dia |
| 17 | Providing and fixing soil, waste and vent pipes : 100 mm dia Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 |
| 18 | Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes : 100 mm dia pipe |
| 19 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete 100 mm dia Sand cast iron S&S as per IS - 3989 |
| 20 | Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. |
| 21 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 20 mm dia nominal bore |
| 22 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 25 mm dia nominal bore |
| 23 | Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore |
| 24 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter |
| 25 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes |
| 26 | Providing and fixing Hand shower ( Health faucet) with 8 mm dia 1.2 meter long flexible tube & wall hook of ALD-573 of Jaquar of KA 580008 of Kerovit or cat No. F160013 of Hindware or equivalent make complete as per direction of Engineer-in -charge. |
| 27 | Providing and fixing of under counter oval shape basin of size 560x430x195 mm with fixing accessories florntine series category number of FLS-WHT-5701 of Jaquar or KO286SW of Kerovit or equivalent make complete as per direction of Engineer-in -charge. |
| 28 | Providing and fixing Towel rail 600 mm long of category number AQN-7711 of Jaquar of KA930001of Kerovit or cat No. F890010 of Hindware or equivalent make complete as per direction of Engineer-in -charge. |
| 29 | Providing and fixing glass shelf 600 mm long of ACN-1171N or Jaquar of KA90005 of Kerovit or cat No. F880010 of Hindware or equivalent make including fixing with SS Screw, rawl plugs etc, complete as per direction of Engineer-in -charge. |
| 30 | Providing and fixing bib cock with flange of continental series Con-047KN of jaquar of Nucleus series KB111004 of Kerovit or Contessa Neo series cat No.F730041 of Hindware or equivalent make , complete as per direction of Engineer-in -charge. 15 mm nominal bore |
| 31 | Providing and fixing Angular stop cock with wall flange of category number -CON-059KN of jaquar or KB111003 of Kerovit or Contessa Neo series cat No.F730039 of Hindware or equivalent make , complete as per direction of Engineer-in -charge. 15 mm nominal bore |
| 32 | Providing and fixing Central Hole Basin Mixer without popup waste system with 450 long braided hoses of continental series Con-167KNB of jaquar Nucleus series KB111027 of Kerovit or Contessa or equivalent make , complete as per direction of Engineer-in -charge. |
| 33 | Providing and fixing 160X110 mm size bottle gully-Trap of astral HSN code 39174000 or Equivalent make including jointing with approve quality adhesive as per direction of Engineer-in-charge. |
| 34 | Providing and fixing 110 mm dia uPVC pipe for drainage, soil waste and vent pipe of drainmaster astral of Equivalent make including all necessary fittings ( expect p-trap) where ever required i/c. jointing with approved quality adhesive as per direction of Engineer-in-charge. |
| 35 | Providing and fixing 110 mm dia uPVC P-Trap of drainmaster of astral of Equivalent make including jointing with approved quality adhesive as per direction of Engineer-in-charge. |
| 36 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group B |
| 37 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 38 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required 5/6 amps switch |
| 39 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required 15/16 A switch |
| 40 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required 6 pin 15/16 A socket outlet |
| 41 | Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. 3 Module |
| 42 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 43 | Supplying and fixing PVC batten/ angle holder including connections etc. as required |
| 44 | Supply and Fixing of Exhaust fan Make: Havells or Equivalent |
| 45 | Supply and fixing of Photon Mirror Light. Make: Phillips or Equvalent |
| 46 | Supply and fixing of Slimline Compact LED Tube Light 20 Watt |
| 47 | Supply and fixing of 25 Ltr Geyser Make: Havells or Equivalent Please Enable Macros to View BoQ information |
