|
| 1 | S&F Galvanised, corrugated mild steel sheeting with two corrugation side lap fixed with coach screws and washers in roofs, 0.63 mm thick Gde-O quality, with 120 grms/sqm zinc coating and Gde 'B' (i.e 12.5 mm ) corrugation, with and including dismantling of existing roof sheets of any pattern complete, all as specified and as directed |
| 2 | S&F 0.63 mm thick plain, galvanised, mild steel sheeting (ISI Marked) grade 'O' with minimum 120 grms/sqm for zinc coating in ridges, hips, valley gutters, drip and straight flashings, fixed with coatch screws and washers including dismantling of existing roof sheets of any pattern , complete all as specified and as directed |
| 3 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour and strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified including dismantling of existing roof sheets of any pattern, complete all as specified and as directed |
| 4 | S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour and strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including dismantling of existing roof sheets of any pattern, complete all as specified and as directed |
| 5 | S & F 2mm thick UV protected multiwall/solid polycarbonate plain/ corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc including dismantling of existing roof sheets of any pattern, complete all as specified and directed . |
| 6 | M & L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer , complete all as specified and directed . |
| 7 | Dismantling timber scantling 40 sqcm and over in section in any position as in unframed/framed work, complete all as specified and as directed |
| 8 | Dismantling of wall & celling boards (fiber pulp insulation etc) or insulation boards/slabs/blankets any thickness, including cover fillets. , complete all as specified and directed . |
| 9 | M&L for Australlian wood panelling 10mm thick including 9mm thick BWR plywood on the wall and finally finishing with french polish (two or more coats) and fixed complete all as specified and directed. |
| 10 | S&F in repair wooden laminated flooring 1200x1200x8-10mm thick with adhesive and base as specified by manufacturer ,including 12mm thick BWR plywood and necessary farme work and finally finishing with french polish (two or more coats) and fixed complete all as specified and directed. |
| 11 | M&L for Khatamband pattern false ceiling ,design as approved by GE with ornamental wood work made out of stainless including 12mm thick BWR plywood and necessary framework and finally finishing with french polish (two or more coats ) and fixed complete all as specified and directed. |
| 12 | S&F aluminiun anodised snap grid ceiling of frame size 600x600mm, main Tee section of size 36.5mmx25mm x1.4 mm thick , cross Tee section of size 23.5mm x26.4 mm x1.4 mm thick, supported at ends all along the wall with aluminium anodised angle of size 40 mm x 25 mm x 2 mm thick and 4mm dia GI suspenders including Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions, complete all as specified and directed . |
| 13 | M&L for insulated PVC wall lining 5mm thick consisting of PVC insulated panels having expended polystyrene (EPS) stuck to 2 mm thick wood grain printed PVC sheet used instead plain colour sheet including suitable PVC beading complete all as specified and as directed |
| 14 | Supply and fixing Aluminium Composite Panel (ACP) cladding of approved make and shade on wall surface, consisting of 4 mm thick ACP panels having 0.5 mm thick aluminium skin on both sides with polyethylene / fire retardant core, exterior grade PVDF coating, fixed over aluminium / GI framework made of aluminium hollow sections / GI tubes of required size, fixed to wall with suitable anchor fasteners, including cutting, bending, routing, fabrication, fixing in position, sealing joints with approved weather-proof silicone sealant, providing necessary flashings, closures, fasteners, scaffolding and all leads and lifts, complete including dismantling any type and pattern., complete all as specified and directed . |
| 15 | M&L 2nd class soft wood (kail) as in scantling clean sawn, complete, all as specified and as directed. |
| 16 | S&F wooden fillets of 2nd class softwood, wrought rectangular in section of sectional area exc 13 Sqcm and n.exc 25 sqcm fixed with nails etc complete, all as specified and as directed. |
| 17 | M&L for preparation of new painted wooden surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed . |
| 18 | Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facings, dressed stonework and precast concrete articles, complete all as specified and directed. |
| 19 | M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exc 6.0 mtr mean radius, built in CM 1:6, complete all as specified and directed. |
| 20 | Taking down cement plaster from brick walls including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed . |
| 21 | M & L for 15mm thick rendering on fair faces of brick work or concrete surface in cm 1:6 to be finished even and smooth without using extra cement ., complete all as specified and directed . |
| 22 | M & L for preparation of new plastered surface and applying two coat of cement base paint of approved tint/ colour on wall including cornices, pilasters over a coat of primer as directed. |
| 23 | Demolition of cement concrete (un reinforced) in ground floor and paving n.exe 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 24 | Dismantling floor, hearth or wall tiling including CM bedding (but not backing), skirting, complete all as specified and as directed. |
| 25 | M & L 25 mm thick PCC 1:2:4 Type B-0 (using 12.5 mm graded crushed stone aggregate ) as in floors etc., complete all as specified and directed . |
| 26 | M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 , complete all as specified and directed |
| 27 | M&L Glazed ceramic colour tiles of size of size 450X 350X 7mm thick as in skirting, dados, walls, vertical surfaces etc., set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles including 10mm thick backing coat in CM 1:3, complete all as specified and directed. |
| 28 | M&L Virified Ceramic light shade tiles 10 mm thick (square/ rectangular polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in cement to match white or coloured cement to match with the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 , complete all as specified and directed |
| 29 | M&L Vitrified Ceramic light shade tiles 10 mm thick (square/ rectangular polished, area of each tiles not exceeding 0.36 sqm,as in skirting, dados, walls, vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles including 10mm thick backing coat in CM 1:3, complete all as specified and directed. |
| 30 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any motar, complete all as specified and directed. |
| 31 | M&L for Granite (of any type) work ,20 mm thick, (table rubbed and polished) in steps jambs , pillars ,window cills ,cooking platforms ,and the like in cement mortar (1:4) including pointing in white cement (1;2) using marble dust with admixture of pigment to match with shade of granite laid over and including 15mm thcik screed bed or bedding layer in CM 1:4, complete all as specified and directed. |
| 32 | M & L 100 mm PCC 1:2:4 Type B2 (using 40 mm graded crushed stone aggregate ) as in foot path/hardstanding, complete all as specified and directed. |
| 33 | M&L for chequered cement concrete tiles 30cm X30cmX25mm thich set, joined and pointed in neat cement slurry in floors with grey cement and with grey cement and pigment and including 15mm thick screed bed in cement mortar 1:4 , complete all as specified and directed |
| 34 | M & L for 75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in plinth protection / hard standing etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2, complete all as specified and directed. |
| 35 | Taking down chowkats or frames n exc 1.5 Sqm each ( without taking off shutters from the frames), complete all as specified and directed. |
| 36 | Taking down chowkats or frames exc 1.5 Sqm but n. exc 4.00 Sqm each( without taking off shutters from the frames), complete as specified and directed. |
| 37 | S&F anodised aluminium powder coated (minimum 50 micron thickness) partition with frame, partly glazed with 5.5mm thick tinted glass and partly panelled with 9mm thick both side decorative prelaminated particle board exterior grade including rubber bead, joining cleat for fixing as mentioned here in below including dismantling, complete all as specified and as directed. |
| 38 | S&F anodised aluminium powder coated (minimum 50 micron thickness) door shutter with frame, glazed with 5.5mm thick tinted glass including rubber bead, joining cleat for fixing, aluminium door handle 150mm size and tower bolt 200mm size,where required double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing brass pivot, mortice lock vertical type of mild steel 4 levers of size 100mm etc as mentioned here in below, complete all as specified and as directed. |
| 39 | S&F frameless toughened glass partition/ window/ door with sliding shutters (02 Nos) or side hinghed type shutter 12mm thick, factory toughened plain/ design sheet glass, using the stainless steel fitting of polished chrome finish, in each shutter (satin stainless steel finish for handles) including dismantling old one cutting necessary holes and cutouts, complete all as specified and as directed .(a) Lock patches with EPC nad strike plate XL-C-4011A:01 No (for openable shutter)(b) Floor spring 90mm opening (EN4) 01 No (for openable shutter)(c ) Top patches XL-C 4012: 01 No (for openable shutter)(d) Bottom patches XL-C 4013: 01 No (for openable shutter)(e) Top pivots XL-C 4014: 01 No (for openable shutter)(f) 450mm long H-Type handles 25mm dia of grade SS-304, XL-C-3003A: 01 No (01 Set for openable shutter) |
| 40 | S&F UPVC Window,(unplastisized poly-Vinly Chloride) sliding window/ fixed or openable type multi-chambered and stiffened framed windows using 88mmx52mm size section all-round as main frams and shutters made with profile section of size 57mmx42mm,including the cost and fixing of 5mm thick clear flot glass in shutters and stainless steel wire mesh shutters shall have well defined welded corner joints without any gaps,fixed the window unit to the existing masonry with anchor fasteners as required. The shutters shall have necessary handles and other associated fittings to the faciliated smooth operation.Both the frames and shutters shall be reinforced with GI proflies of thickness 1.25mmthe entire window is covered with MS powdercoated tube of size 40mm*20mm all-round the frame the frame section,10mm square bars horizontally placed at120mm C/C and suitably placed vertically to avoid buckling and providing structural strength, Minium weight shall be 10kg/Sqm and fixed to UPVC frames with suitable fasteners. The gaps between the window frames and masonry walls shall be filled with silicon or with any other suitable filler materials, complete all as specified and directed. |
| 41 | S & F Aluminium powder coated (powder coated of required colour) three track sliding windows frame top & sides of size 92 x 31.75 x 1.50mm (section No 20831), bottom of size 92 x 31.75 x 1.50mm (section No 20832) and shutter top & bottom of size 40 x 18 x 1.55mm (section No 20736) and side (handle) of size 40 x 18 x 1.55mm (section No 20738) and lock side shutter frame of size 40 x 18 x 1.45mm (sectio No 20737) and for wire guage shutter of size 18 x 43.50 x 1.35mm (Section No.20791) with locking arrangement including stainless steel wire mesh 0.36 mm nominal dia of wire with 1.40mm average aperture and fixed with stainless steel wire staples and providing 5.5mm thick tinted glass with necessary rubber beading gasket and aluminium (anodised) grill, square, ractangular or similar section, fixed with channel of size 38 x 12 x 13mm etc including making good to the disturbed surfaces, complete all as specified and as directed. |
| 42 | S&F aluminium window openable/ fix type with aluminium anodized frame of section 62.30 x 44.50 x 1.5 mm with shutter stiles rail of aluminum section of size 47.62 x 44.45 x 1.5 mm thick includiing jointing cleat for fixing binder hardware glazing clips rubber packing for air lock purpose anodized aluminum strip bearing screw etc for fixing glass pans in frame shutter covered with fully selected quality tinted glass 5.5 mm thick tinted glass with rubber packing complete all as spcified ad as directed. |
| 43 | S & F aluminium (powder coated with approved colour) ventilator, partialy glazed and partialy louvers, outer frame & mullion fabricated with aluminium section of size 82.50 mm x 38.00 mm x 1.70 mm thick (Cat No 20036), half portion glazed with 4 mm thick frosted glass including rubber beading, & glazing clip, half portaion louvers of 80 mm wide & 4 mm thick frosted glass including aluminium louver patti including S.S wire gauge of fixing of 0.36mm dia and 1.40 width of aparture with 25x3mm think aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position and aluminium (anodised) grill, square, ractangular or similar section, fixed with channel of size 38 x 12 x 13mm etc., complete all as specified and directed |
| 44 | S&F in repair Bib taps, w/o flange cast copper alloy, fancy type chromium plated, with crtuch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed. |
| 45 | S&F in repair pillar cock, cast copper alloy, with capstan heads, chromium plated, fancy type ,screwed down high pressure, with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe of dia 15 mm, complete all as specified and directed. |
| 46 | S&F in repair vitreous china wash hand basin white flat back of size 630x450 mm including bracket, cutting for and pinning the ends of brackets or erecting stands exclusive of waste pipe but including brass chromium plated waste coupling with long screwed sank and fly nuts complete all as specified and directed. |
| 47 | S&F in repairs CP fancy type mixture tap of std quality for mixing hot & cold water with centre hole mixer with fittings, complete all as specified and directed. |
| 48 | S&F PVC valve less syphonic action type (Twin type) flushing cistern 10 litres capacity low lavel coloured with inlet ball valve float and handel brackets all as fixed in repair complete all as specified and directed. |
| 49 | S&F in repairs wall mounted EWC with all fittings and accessories all as per manufacturers instruction including dismantling, complete all as specified and directed. |
| 50 | S&F in repairs white vitreous china one piece EWC (European type water closet) of approved make, single mould construction with integral flushing cistern, dual flush system (3/6 litre), soft close seat cover, including P-trap/S-trap (100 mm outlet), fixing bolts, rubber gasket, connection to soil pipe, inlet connection with CP angle valve and flexible hose, testing and commissioning include dismantling, complete all as specified and directed. |
| 51 | S&F in repairs EWC cascade with all fittings and accessories all as per manufactures instruction, including dismantling, complete all as specified and directed . |
| 52 | S&F counter top wash hand basin oval shape of white vitreous china of approved make, fixed over 18–20 mm thick machine polished granite platform, supported on BWP grade plywood cabinet of 16–18 mm thickness with laminate finish, including shutter doors with SS hinges and handles, cutting of granite for basin fixing, sealing with approved silicone sealant, providing and fixing 32 mm dia CP brass waste coupling, CP brass bottle trap, 15 mm CP brass angle valves with 450 mm long braided flexible connections, connecting to existing water supply and waste line, making good the wall surface, testing and commissioning complete including dismantling of existing one, complete all as specified and directed . |
| 53 | S&F in repair ceramic gents urinal sensor operated Automatic wall mounted type with all fittings and accessories all as per manufactures instruction, complete all as specified and directed. |
| 54 | S&F PVC connection 15mm size with PTMT nuts of length 450 mm, fixed in repair, complete all as specified and directed . |
| 55 | S&F grating square fitting of size 150 mm made in two parts for smell and mosquito proofing with minimum 25 mm water seal of PTMT (Medium wt 85 gms), complete all as specified and as directed |
| 56 | S&F angle valve fancy type chromium plated with wall flange cast copper alloy screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore and fixed in repairs, complete all as specified and directed . |
| 57 | S&F 15 mm GI connector for hot and cold water connection 450/600 mm long braided flexible pipe complete including dismantling, complete all as specified and directed. |
| 58 | S&F in repairs 32 mm dia PVC waste pipe for WHB, complete all as specified and directed . |
| 59 | S&F looking mirror of size approx 600 mm × 450 mm made of 5 mm thick superior quality mirror glass with polished edges, fixed on wall with suitable screws and rawl plugs , including dismantling of old ones any size and pattern,complete all as specified and directed . |
| 60 | S&F wall mounted LED looking mirror of approved make, rectangular shape of size approx 600 mm × 600 mm (or as required), made of 5 mm thick high quality mirror glass with polished edges, having LED light strip on perimeter (backlit/frontlit) with inbuilt touch sensor on/off switch, complete with IP-rated driver, necessary wiring, connection to existing electrical point, fixing with suitable screws and rawl plugs, testing and commissioning including dismantling old one, complete all as specified and directed . |
| 61 | S&F wall mounted retractable awning of approved make, shape,size n exc 8sqm and pattern having powder coated MS / aluminium frame with articulated folding arms, heavy duty spring mechanism, and waterproof UV-resistant acrylic / polyester fabric canopy, complete with manual crank handle, suitable wall mounting brackets, anchor fasteners, testing and commissioning including dismantling , complete all as specified and directed . |
| 62 | Supply and fixing wall mixer 3-in-1 (hot & cold) consisting of wall mixer with provision for overhead shower and hand shower, complete with L-bend, hand shower, 1.5 m long flexible stainless steel hose, wall hook, connecting pieces, nuts, washers, etc., approved make, including dismantling and commissioning, complete all as specified and directed . |
| 63 | S&F in repair CP Mixer single lever basin mixer fancy type for WHB / Sink with double action for hot/Cold water complete all as specified and directed. |
| 64 | Supply and fixing modular stainless steel kitchen sink unit of approved make, comprising stainless steel sink bowl (minimum 1.0 mm thick, Grade 304), drain board, and factory-made modular cabinet below in marine ply / HDHMR board with laminate finish, complete with CP waste coupling, PVC waste pipe, bottle trap, necessary brackets, screws, sealant, and all fittings, conforming to all specifications, including dismantling ,fixing, testing and commissioning , complete all as specified and directed . |
| 65 | Supply & installation of 100% EPDM Rubber Gym flooring tiles 500x500x30mm thick, with anti-skid surface, heavy duty, weather resistant, fixed with proper bonding/adhesive, complete including dismantling old flooring of any pattern, complete all as specified and directed . |
| 66 | S&F and laying Polyurethane (PU) 12-15mm thick seamless flooring system of approved make and shade, consisting of surface preparation by mechanical grinding,crack filling,laying of SBR (Styrene Butadiene Rubber) cushion layer (where required) application of primer coat, self-levelling polyurethane base coat of required thickness, and PU top coat (matt/gloss finish), including anti-slip, shock absorbing characteristics where required, complete with all materials, labour, tools & tackles, finishing, curing and cleaning, as per manufacturer’s specifications, complete all as specified and directed. |
| 67 | S&F 1.5mm thick PVC tiles/ sheets,laminated plain coloured,marbled mosaic or mottled finish, laid with approved rubber based adhesive in floors, complete all as specified and directed . |
| 68 | S&F 2mm linoleum,plain coloured sealed down with an approved adhesive including stretching,cutting and fittings , complete all as specified and directed . |
| 69 | Providing and fixing acid etched frosted glass of approved make, manufactured from clear float glass, uniformly frosted on one face by acid etching process to obtain smooth translucent finish, conforming to relevant IS standards, of thickness 4mm (or as specified), cut to required size and shape, edges machine cut and polished, including cost of all materials, labour, carriage, loading/unloading, wastage, and fixing in position in aluminium/wooden/ UPVC frames with necessary clips, beading, rubber gasket, sealant etc. including dismantling, complete all as specified and directed . |
| 70 | Supply and fixing roller/vertical/Zebra/ Venetian blinds of approved make, made of polyester fabric/PVC/aluminium/wooden of approved shade and design, complete with head rail, bottom rail, side brackets, control chain/cord mechanism, including fixing with screws, rawl plugs etc. complete including taking down old one, complete all as specified and directed . |
| 71 | S&F brass 2 lever Mortice lock, vertical type, size 100-150 mm complete all as specified and as directed. |
| 72 | S&F in repairs glass shelf consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long, complete all as specified and directed. |
| 73 | Providing and fixing corner type glass shelf , made of 8 mm thick toughened (tempered) glass, clear/transparent with machine polished edges, of approved make and quality, including necessary stainless steel (Grade 304) brackets/clamps, screws, nylon rawl plugs and fitting & fixing including dismantling complete in position, complete all as specified and directed . |
| 74 | Taking up or down steel tubing 15 mm dia and connections and stacking neatly for offering credit, complete all as specified and directed . |
| 75 | S & F medium grade galvanised steel tubing, 15 mm bore, with all fittings and fixed to walls and ceilings or laid in floors, complete all as specified and directed . |
| 76 | Taking up or down steel tubing 20 mm dia and connections and stacking neatly for offering credit, complete all as specified and directed . |
| 77 | S & F medium grade galvanised steel tubing, 20 mm bore, with all fittings and fixed to walls and ceilings or laid in floors, complete all as specified and directed . |
| 78 | Dismantling wrought iron or mild steel work of any description not other wise provided, Complete all as specified and directed. |
| 79 | S & F Compound girders & stanchions, lattice griders, aerial masts, staging for water tanks & the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates etc. of Gde Fe 410-W (Gde- E-250) Qty-B, Complete all as specified and directed. |
| 80 | S&F stainless steel letters (for name boards / building signage) made out of SS 304 grade, with mirror / matt finish, fabricated from 1.5 mm to 2.0 mm thick stainless steel sheet, including cutting, bending, shaping, welding, polishing, and making hollow letters with necessary stiffeners and dismantling old ones, Complete all as specified and directed.The work includes: • Fixing of letters with studs, spacers, and fasteners • Proper alignment and leveling • Drilling holes in wall surface • Fixing with chemical anchor / rawl plugs • Filling gaps with sealant where required • Complete as per direction of Engineer-in-Charge.Height of letters: ( 150 mm / 200 mm / 300 mm etc.)Thickness / depth: 20 mm to 50 mm as required.Finish: Mirror polish / Hairline / Matt finish. |
| 81 | S&F rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top) hoisted and fixed in position incl all accessories of capacity 1000 ltrs, Make : Sintex/Star/Polycon, Fusion or equvalent incl S&F ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 20 mm dia and including taking out UNSV storage water tank of capacity 1000 Litres, complete all as specified and directed . |
| 82 | S&F rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top) hoisted and fixed in position incl all accessories of capacity 500 ltrs, Make : Sintex/Star/Polycon, Fusion or equvalent including fitting ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 15 mm dia and including taking out UNSV storage water tank of capacity 500 Litres, complete all as specified and directed |
| 83 | Notes :-An amount of Rs.88,835.00 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum. Please Enable Macros to View BoQ information |
