|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar beding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 2 | S&F non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in flooring etc set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match with colour of tiles over and incl screed bedding 15mm thick in cm(1:6), complete all as specified and directed. |
| 3 | M & L Glazed Ceramic coloured tiles 450x300x7 mm thick over and incl 10 mm thick rendering in CM 1:4 on vertical surfaces, set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match colour of tiles complete all as specified & directed. |
| 4 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons laid ,beded and pointed in any morter, complete all as specified and directed. |
| 5 | M&L for Green marble work 18 to 20 mm thick ( table rubbed and polished) one piece as in stairs landing ,risers of steps,jambs,pillars, window cills cooking platforms etc , jointed with white cement (1:2) using marble dust with admixture of pigment to match with marble shade including 10mm thick rendering in CM 1:4 etc complete all as specified and directed. |
| 6 | M&L machine cut kota stone flooring 18-20 mm thick over & including 20mm thick screed bed in cement mortar 1:6, laid jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing, complete all as specified and directed. |
| 7 | S&F for Joint less non skid ceramic tiles8-9mm thick (square/rectangular) polished dark shade, area of each tile exceeding0.18 but n exc 0.38 sqm in flooring etc set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match with colour of tiles over and incl screed bedding 15mm thick in cm(1:6), complete all as specified and directed. |
| 8 | M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 , finished fair and even without using extra cement etc including taking down cement plaster on brick or concrete surfaces on walls including racking out joint, hacking for key, scrubbing down with water etc and preparing new plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer on surfaces of walls with paint roller complete all as specified and directed by Engineer-in-Charge |
| 9 | M&L for rendering 12 mm thick in CM 1:6 over brick/ concrete surfaces finished even and smooth without using extra cement etc including taking down cement plaster on brick or concrete surfaces on wall/ ceilling/ stone/ block etc including racking out joint, hacking for key, scrubbing down with water etc and and preparing new plastered surfaces and applying two coats of oil bound distemper paint on surfaces of walls with paint roller over 3mm wall care putty complete all as specified and directed by Engineer-in-Charge |
| 10 | M&L for rendering 5 mm thick in CM 1:3 on ceillng, finished even and smooth etc including taking down cement plaster on brick or concrete surfaces on wall/ ceilling etc including racking out joint, hacking for key, scrubbing down with water etc and preparing newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge |
| 11 | M&L for complete removal of existing treatment on surfaces of walls apply two coat of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification using paint roller technology and providing 2mm thick wall care putty and sanding the surface to prepare the surface even and smooth complete all as specified and directed. |
| 12 | M & L for applying One coat of white wash on old Ceiling surface including preparation of surface, complete all as specified and directed. |
| 13 | M&L for complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over 2mm thick cement base putty and sanding the surface to prepare the surface even and smooth complete all as specified and directed at any height incuding necessary scaffolding over new/complete removal surfaces. Please Enable Macros to View BoQ information |
| 14 | M&L for complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over 2mm thick cement base putty and sanding the surface to prepare the surface even and smooth complete all as specified and directed at any height incuding necessary scaffolding over new/complete removal surfaces. Please Enable Macros to View BoQ information |
