|
| 1 | Excavation in post holes ( Or similer holes) each n Exc 0.5Cum getting out and removing any type of soil to a distence N.Exc 50m and making good the disturb surface in soft/loose soil all as specified and directed. |
| 2 | S&F mild steel rolled section as in main and cross beam, hip and jack rafters; purline where connected to common rafter and running rail and guides for sliding door;fixed with angle cleat or other connecting plates conforming to 410-W (Gde-E-250)quality A complete all as specified and directed. |
| 3 | S&F mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire; flat iron fillets (for securing wire mesh) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 4 | S&F mild steel screw bolts 11mm to 15mm dia( Mechine made)with hexagona or square head one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or sqaure exc.10cm and not exc 15cm long complete all as specified and directed. |
| 5 | M&L for PCC 1:3:6, type C1 (using 20mm graded stone aggregate) as in foundation and mass concrete complete all as specified and directed. |
| 6 | S&F pre-painted galvalume aluminuim zinc coating GI based corrugated steel sheet 0.5mm thick of colour having tensile strenght of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 7 | M&L for two coats of synthetiic enamal paint over a coat of red oxide primer including preparation of new steel surfaces of any descripotion Exc 10cm width or girth complete all as specified and directed. |
| 8 | S&F in repairs 500 Ltrs capacity rotational moulded triple layer polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed. |
| 9 | S&F stainless steel sink with drainage board made out of 1.00mm thick sheet for kitchen including bedding in CM to dwarf wall and incl fixing cast iron cantiliver bracket connecting union over all size not less than 915MX460mm with bowl size 410X330X160mm complete all as specified and directed. |
| 10 | S&F ball valve/float ball high pressure of PTMT 20mm with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed minimume weight 210 gm etc complete all as specified and directed. |
| 11 | S&F in repairs 15mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed. |
| 12 | S&F in repairs 20mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed. |
| 13 | M&L for glazed ceramic coloured tiles size 300mm x 450 mm x 6-7 mm thick (Colour and design of tiles as approved by GE) on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 14 | M&L non skid/mat finish ceramic colour tiles 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.11 sq m but not exceeding 0.16 sqm (Colour and design of tiles as approved by GE), in floors etc, and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed. |
| 15 | S&F PVC waste pipe fixed to any type of coupling of 32 mm threaded complete all as specified and directed. |
| 16 | M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing complete including screed bed 15mm thick in CM (1:6) including demolition old flooring complete all as specified and directed. |
| 17 | M&L for Granite 18-20 mm thick(of any type) work (table rubbed and polished) for wall lining / shelves including rounding of edges , (Veneering to wall) and laid on cill of parapit wall over 12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite colour Red or brown complete all as specified and directed. |
| 18 | M&L for brick work with modular size burnt fly ash bricks, straight or curved on plan exc. 6 m mean radius built in cement mortar (1:6) complete all as specified and directed. |
| 19 | M&L for rendering 10mm thick plaster in CM (1:6) on faces of brick work or concrete surfaces, finished even and smooth without using extra cement including taking down of old cement plaster complete all as specified and directed. |
| 20 | M&L for rendering 5mm thick in CM 1:3 as in soffits of ceiling and Rcc cjhaja/ Facia roof projections finished fair & even all as specified incl taking down plaster complete all as specified and directed. |
| 21 | M&L for applying three coats of white washing on new plastered surfaces of ceiling including preparation complete all as specified and as directed. |
| 22 | M&L for preperation of new/old plastered surfeces and applying of two coat of distempering and over one coat of putty complete all as specified and directed. |
| 23 | M&L for providing and applying minimum 1mm thick wall care putty over prepared surface to achive the surface even and smooth for painting complete all as specified and directed. |
| 24 | S&F in repairs vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of tap, waste fitting etc complete all as specified and directed. |
| 25 | S&F in repairs 15 mm dia bore pillar tap (swan neck) cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly-nuts, screwed for iron pipe complete but fency type complete all as specified and directed. |
| 26 | S&F in repairs 10 Ltr capacity,PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets with and including 32 mm dia PVC flush pipe complete all as specified and directed. |
| 27 | S&F in repairs PVC connection pipe 15 mm dia 450 long with PTMT nut at both ends complete all as specified and directed. |
| 28 | S&F in repairs 600mmx450mm mirror of selected quality glass, mounted on 6mm thick Block board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers wooden frame complete all as specified and directed. |
| 29 | S&F in repairs brass chromium plated angle cock 15 mm dia screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 30 | S&F in repairs vitreous china urinal large stall type with including spreader for urinal, providing & fixing of plugs bedding against wall in cement mortar 1:2 pointing around urinal back in cement mortar complete all as specified and directed. |
| 31 | S&F in repairs vitreous chaina wash down water closet pan (pedestal pattern), white including pedestrial pan and trap, including connecting to drain or outgoing pipe and to flushing pipe, antisyphonage pipe etc complete all as specified and directed. |
| 32 | S&F in repairs white coloured Plastic water closet seat, back, closed pattern with flat bottom , and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 33 | S&F in repairs 15mm dia long body Bib tap chromioum plated with crutch or butterfly handle sorewed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 34 | S&F in repairs PVC (SWR) gully trap 110 mm,setting and jointing with solvent cement complete all as specified and directed. |
| 35 | S&F in repairs Gun-metal, globe of gate balve /flush cock of 20mm bore with iron wheel head, screwed both ends for iron pipe etc complete all as specified and directed. |
| 36 | S&F in repairs PVC (SWR) nahani trap with CP grating having diameter of outlet 75 mm including joining to waste pipe with solvent cement complete all as specified and directed. |
| 37 | S&F in repairs 110 mm dia bore. PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in floor/ trenches complete all as specified and directed. |
| 38 | S&F in repairs 75mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in floor/ trenches complete all as specified and directed. |
| 39 | S&F PVC (SWR) pipes of dia 75 mm single socketed in any length with rubber ring joints fixed to walls with clamps of dia 75 mm complete all as specified and directed. |
| 40 | S&F in repairs 110 mm dia bore PVC (SWR) bends with acess door any radius with solvent rubber ring joints, fixed complete all as specified and directed. |
| 41 | S&F in repairs 75mm dia bore PVC (SWR) bends with acess door any radius with solvent rubber ring joints, fixed complete all as specified and directed. |
| 42 | S&F in repairs 75 mm dia bore PVC (SWR) vent cowl rubber ring joints, fixed complete all as specified and directed. |
| 43 | M&L for 25 mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in subbase of tiles/ stones complete as in levelling work etc complete all as specified and directed. |
| 44 | M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base for pavement, path, floor etc complete all as specified and directed. |
| 45 | S&F powder coated aluminium ventilator cross section conforming to IS 63.5x38.10x1.5mm consisting of two partions upper portion shall have louvers with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket including aluminium beads, including preparation of jombs all around in CM 1:3 finishing even and smooth complete all as specified and directed. |
| 46 | Taking down chowkhats or frames not exc 1.5 sqm each without taking off shutter from the frame complete all as specified and directed. |
| 47 | S & F factory made 30 mm thick 100% solid WPC (wood polymer composite) laminated flush door shutter of required size comprising of virgin PVC resin of K value 57-60 ( suspension grade), Calcium carbonate and natural fibers ( Wood powders / rice husk/wheat husk) and non toxic additives made from extension process WPC foam sheet single extruded (Inner) with having minimum density not less than 650 kg kg/cbm, an ISO 9001-2015 certified company , having good screw holding capacity (Screw withdrawal strength of 200 N (Face) & 1100 N (Edge) minimum compissive of 50N/mm2 Modulus of elasticity 850N/mm2 and resistance of spread of flame of class A category property of being Termite/ borer free , water/ moisture proof and fire retardant WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws , all as per direction of Engineer-In-charge ,Material test certificate and authentication should be compulsory provided by the manufacturing company complete all as specified and as directed. |
| 48 | S&F 100mm long butt hinges stainless steel complete all as specified and directed. |
| 49 | S&F 150 mm long stainless steel barrel tower bolts of extruded section complete all as specified and directed. |
| 50 | S&F stainless steel handles 150 mm complete all as specified and directed. |
| 51 | S&F in repairs stainless steel Wall Mount Case with Soap Holder & Brush Holder fixed to wall complete all as specified and directed. |
| 52 | S&F in repairs towel rail 600mm long 20mm dia brass chromium plated fixed with wooden gulties embedded in cement mortar (1:3) with MS screws etc complete all as specified and directed. |
| 53 | S&F in repairs sheet glass shelf 5.5mm thick with aluminium bracket and railing 60cm long and width 12.5cm as per sample complete all as specified and directed. |
| 54 | S&F in repairs corner glass shelf 5.5mm thick with aluminium bracket and railing as per sample complete all as specified and directed. |
| 55 | S&F in repairs health faucet 15 mm dia with flexible pipe of 1.25m length including abs wall hook for EWC complete all as specified and directed. |
| 56 | S&F in repairs 15 mm bore two way bib taps long body, chromium plated cast copper alloy long body , screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 57 | S&F in repairs over head shower with arm & flnge of chromium plated with or without swivel joints, any size, including fixing to 15mm dia steel pipe for required length or union complete all as specified and directed. |
| 58 | S&F powder coated aluminium sliding glazed windows with three track shutter sliding (two shutters glazed and one shutter wire mesh) shall be following specification complete all as specified and as directed by Engr-in-Charge.(i) Windows frame of cross section 101mm x 44mm x 1.5mm thick.(ii) Three way track for sliding shutters of cross section 91.8mm x 31.75mm x1.1mm thick.(iii) Sliding shutter frame of cross section 40 x 18 x 1mm thick.(iv) 4 mm thick tinted glass superior quality.(v) IDPE Rubber guasket for fixing of glass.(vi) Locking cleats per shutter -01 Nos.(vii) Sliding rollers per shutter - 02 Nos.(viii) S.S wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56mm for shutters 01 Nos. |
| 59 | S&F in repairs vitreous chaina wash down water closet pan (one piece pattern), white including flushing cistern pedestrial pan and PVC trap, including seat cover for pedestial pan and connecting to drain or outgoing pipe and to flushing pipe, antisyphonage pipe etc complete all as specified and directed. |
| 60 | M&L for reinforced cement concrete nominal mix (M-20) as in Slabs supported on walls, ,chajjas, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 61 | S&F mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, footing, roof beam, plinth beam, slab,chajjas and similar work hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 62 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed. |
| 63 | Taking down shutters exc 1.00 sqm but n.exc 2.00 Sqm each complete all as specified and directed. |
| 64 | Cutting chases, pinning in, making good to facings where required and pointing in CM(1:3) to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in Stone/ brick walls complete all as specified and directed. |
| 65 | Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc. complete all as specified and directed. |
| 66 | M&L for Point wiring with FR LSH PVC insulated PVC unsheathed electric cable 1100V grade single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area drawn in & including non metallic rigid PVC conduit ISI marked medium grade not less than 20mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good and matching disturbed surface of wall with existing surface of wall (cutting except on ceiling for fan point only, on ceiling instead of PVC conduit surface casing caping will be used) & 1.5 sqmm green FR LS H PVC insulated unsheathed copper conductor as earth wire connected to earth dolly by providing lugs including galvanised boxes and bakelite sheet for mounting switches, sockets, fan regulators etc for One light point/fan point controlled by one switch .Make of PVC conduit/Casing Caping:- Plaza/Finolex/Polycab/Kalinga/Jindal/Asian . (a) One light point controlled by one switch |
| 67 | (b) One 5amps socket out let point controlled by one switch on same board with other switches. |
| 68 | S&F Modular Switch , single pole, one way, and 5/6 Amp single module complete all as specified and directed. |
| 69 | S&F Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module complete all as specified and directed. |
| 70 | S&F ceiling rose surface bakelite three terminal complete all as specified and directed. |
| 71 | S&F lamp holder,PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. |
| 72 | S&F in repairs integrated LED tube light fitting 1x18/20 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of PVC square boxes complete all as specified and directed. Make:- Havells Cat No. LHEXBLP7PN1W018 , Bajaj cat Pt No. BCLSB 18WH / Wipro / Make as per Particular Specification |
| 73 | S&F in repairs integrated LED tube light fitting 1x9/10 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of PVC square box complete all as specified and directed.Make:- Havells Cat No. LHEXBLP7IN1W009 Bajaj Cat Pt No. BCLSB 10 WH / Wipro / Make as per Particular Specification. |
| 74 | S&F in repairs Highly efficient LED Bulbs, 10 watts in B-22 cap complete all as specified and directed. Make Bajaj/ Havells/ Crompton / / Make as per Particular Specification |
| 75 | S&F in repairs double door SPN DBs 4 way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral complete all as specified and directed by Engr-in-Charge. |
| 76 | S&F in repairs MCB SPN 6 to 32 amps 10 KA, 'B' series including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-in-Charge. |
| 77 | S&F in repairs MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'B' series including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-in-Charge. |
| 78 | S&F Exhaust fan 250mm sweep, AC single phase 230 Volts, non metallic type, complete with louver including electric connection with suitable size copper conductor cable, clamps, nuts, bolts etc including making hole of appropriate size in the existing brick wall and making good the disturbed wall and matching with the existing surface of wall complete all as specified and directed by Engr-in-Charge. Make : Havells Model: Ventil Air-DX white /Bajaj/Crompton/ Make as per Particular Specification. Please Enable Macros to View BoQ information |
