|
| 1 | Taking down chowkat or frame exc 1.5 Sqm but n.exc 4 Sqm each (without taking off shutter from the frame) complete all as specified and directed. |
| 2 | Taking down chowkats or frames n. exc 1.50 Sqm each with shutters (without taking off shutter from the frames) complete all as specified and directed. |
| 3 | Dismantling floor, hearth , wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 4 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed please. |
| 5 | Dismantling boarding any description fixed in any position with nails complete all as specified and directed. |
| 6 | Dismantling of timber scantling 40 sqcm over in section in any position (unframed work). |
| 7 | S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre using Hangers 40 mm flat. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified to plaster of paris ceiling (Gypsum anhydrous board) complete all as specified and as directed . |
| 8 | M&L 12mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately) |
| 9 | S&F false ceiling gypsum cornice moulding of 100mm wide facades and soffit as design approved by GE. |
| 10 | M&L for 2nd class hard wood plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails or brads , sectional area exc. 13 and n.exc. 25 sqcm complete all as specified and directed. |
| 11 | S&F for 10mm thick coloured PVC panels with EPS stuck to colour PVC sheet suitably placed in false ceiling/wall panelling, grid made of Aluminium/G.I./M.S. or wooden fillets as per specification and drawing all as specified and directed. |
| 12 | S&F 2nd class SW boarding 20mm thick fixed with nails in eaves board plained one side with butt joint complete all as directed. |
| 13 | M&L for wrought 2nd class hard wood in scantling unframed and fixed complete all as specified and directed. |
| 14 | Fixing only for wrought 2nd class hard wood in scantling unframed and fixed complete all as specified and directed. |
| 15 | M&L 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid ,rounded or chamfered ,put together with glue pinned at joints , supplied and fixed complete all as specified and directed. |
| 16 | S&F 35 mm thk Flush door shutters solid core construction with block board core and plywood face pannels , commercial type on both sides complete all as specified and directed. |
| 17 | S&F 35mm thick premium teakwood ornamental designer door shutters of solid core construction design and colour approved by GE complete all as specified and directed. |
| 18 | S&F 35mm thick 2nd class hard wood glazed and skelton shutters open rebated (door/ window/ ventilators) and prepare to receive glass, gauze, (without sash bars), edges of framing divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers beads for securing glass, etc. complete all as specified and directed. |
| 19 | S&F stainless steel wire cloth,0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples. |
| 20 | S&F 18/19 mm thick block boards fixed with screws to timber frame complete all as specified and as directed. |
| 21 | M&L 12 mm thick Plywood (07 Nos of ply) , grade BWP, type BB, fixed with screws to timber frame work complete all as specified and as directed. |
| 22 | S&F 1.5 mm thick decorative laminates type 1 of surface finish color and pattern as approved fixed with approved adhesive as per manufactures instruction complete all as specified and directed. |
| 23 | S&F butt hinges 75 mm medium weight, stainless steel, and fixed complete all as specified and directed. |
| 24 | S&F Butt hinges 125mm, medium weight, stainless steel, and fixed complete all as specified and directed. |
| 25 | S&F 150mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed. |
| 26 | S&F extruded brass handles , fabricated type polished of size 150 mm complete all as specified and directed. |
| 27 | S&F 250mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed. |
| 28 | S&F extruded brass handles , fabricated type polished of size 250 mm complete all as specified and directed. |
| 29 | S&F Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) of 300mm long and fixing bolt with rolled or drawn brass bolts and fixed. |
| 30 | S&F Magnet catches for cupboard shutter, brass body and striking plate including letting in all as specified and as directed. |
| 31 | S&F 30mm width of flaps (When open in mm) continuous (piano) hinges, mild steel , bright finish or electro galvanised complete all as specified and directed. |
| 32 | S&F powder coated (min powder coating 50 micron) anodised aluminium frame for doors, windows , ventilators plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and as directed. |
| 33 | S&F powder coated (powder coating min 50 micron) anodised two or three track sliding type window and ventilator shutters or side hung / without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) complete all as specified and directed. |
| 34 | M&L for 4.80 mm thick sheet glass quality and glazing fixed to aluminium frame n.exc 0.50 sqm complete all as specified and as directed. |
| 35 | M&L for 4.80 mm thick sheet glass quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed. |
| 36 | M&L for 4.80 mm thick frosted sheet glass quality and glazing fixed to aluminium frame n. exc 0.50 sqm complete all as specified and as directed. |
| 37 | M&L for 25 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) used over sub base to recd floor tiles complete all as specified and directed. |
| 38 | M&L for Dark shade Virified Ceramic tiles 9-10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.30 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specified and directed. |
| 39 | Taking down plastering on lathing (other than wire-netting, without removing lathing, in cement mortar (one side only measured in cases where both sides are plastered). |
| 40 | M&L for rendering 10mm (cement plaster 1:6) thick on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing complete all as specified and directed. |
| 41 | M&L for rendering 15mm (cement plaster 1:4) thick on the other side of lathing with approved Water proofing compound @ 3% by the weight of cement or as per manufacturers instructions complete all as specified and directed. |
| 42 | Supply only Integral waterproofing compound |
| 43 | S&F designer Curtain Channel as designed for a smooth and effortless movement for a Window/Door , Ceiling Fit, All Accessories Included - Runners, Hooks, End caps, Ceiling Brackets, Jointer, Screws & Wallplugs complete all as specified and directed. |
| 44 | M&L for 75 mm thick cement concrete 1:2:4, type B-2 (using 40mm graded agg) as in plinth protection finished even and smooth without using extra cement.(incl necessary joint filling with mixture of paving bitumen & sand in 1:3). |
| 45 | S&F MS framed work such as grills, gratings, etc with ends of bars, shouldered and/ or riveted or forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk way, railing and framed work of water tanks and similar work confirming to Fe 290 Gde E-165 complete all as specified and as directed. |
| 46 | M&L complete removal of existing treatment of old painted concrete / plastered surfaces of any description , over 10 cm in width or girth, not otherwise described and applying 1mm thick of white wall care putty or cement paste to achieve smooth surfaces and applying two coat of plastic emulsion paint of approved shade/tint over a priming coat paints plaster complete all as specified and directed. |
| 47 | M&L for preparation of newly concrete/plastered surfaces/ceiling of any description , over 10 cm in width or girth, not otherwise described and applying 1mm thick of white wall care putty or cement paste to achieve smooth surfaces and applying two coat of plastic emulsion paint of approved shade/tint over a priming coat paints plaster complete all as specified and directed. |
| 48 | M&L for preparation of new plastered/concrete surfaces of walls and priming with alkali resistant primer paint applying two coats of weather coat exterior paint with roller etc complete all as specified and as directed. |
| 49 | M&L for preparation of plastered or unplastered old decorated surfaces of walls by washing rubbing down and stopping of any external painted surfaces and priming with alkali resistant primer paint applying two coats of weather coat exterior paint with roller incl filling of holes and cracks with suitable material like cement or plaster of paris etc complete all as specified and as directed. |
| 50 | M&L for preparation of new steel surfaces of any description , over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat red oxide primer all as specified. |
| 51 | M&L for preparation of new or previously untreated surfaces of wood and wood based materials of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer all as specified and as directed. |
| 52 | M&L for preparation of old surfaces of wood and wood based materials of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer all as specified and as directed. |
| 53 | M&L preparation surface of wood and wood based material new or old of any description and girth and treated with creosote oil complete all as specified and directed. |
| 54 | Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling, complete all as specified and directed. |
| 55 | Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories, PVC conduit on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable modular or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light/fan point controlled by one switch. |
| 56 | Description all as per Srl item No. 55 here in before but for one bell point controled by one bell push complete all as specified and directed. |
| 57 | Description all as per Srl item No 55 here in before but for socket outlet point 5 Amp on same board complete all as specified and directed. |
| 58 | Description all as per Srl item No. 55 here in before but for socket outlet point 5 Amp on Independent board complete all as specified and directed. |
| 59 | Description all as per serial item No 55 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) complete all as specified and directed. |
| 60 | Supply and fixing modular switch 1 way 6 A with cover plate and frame 230/250 volt , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. |
| 61 | Supply and fixing modular sockets with cover plate and frame 6A 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, with cover plate complete all as specified and directed. |
| 62 | Supply and fixing modular switch 1 way 16 A with cover plate and frame230/250 volt , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. |
| 63 | Supply and fixing modular sockets 6A/16A 2/3 pin combined 2 module with cover plate and frame 230/250 Volts, 50 Hz , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. |
| 64 | Supply and fixing modular bell push 1 way 6 A module 230/250 volt , AC supply, ISI Marked, with cover plate complete all as specified and directed. |
| 65 | Supply and fixing call bell ding dong, AC, 230 V, Single pole ISI marked all as specified and directed. |
| 66 | S & F LED light fitting /1X10W wall bracket luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 67 | S&F Bedside Wall Light, Fabric Shade with Crystal Plate 4.5W of make Jaquare cat part No. DCW-ABR-FBCRYS155 complete all as directed. |
| 68 | Supply and fixing round shape 3 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete Make Jaquar cat part No.IDL-WHT-LLCN01R003XC |
| 69 | Supply and fixing round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 70 | Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 71 | Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 72 | Supply and fix Flexible LED indoore strips light 15W of Make Jaquare cat part No. STI-WHT-LSTP03X015XC complete all as specified and direcetd. |
| 73 | S & F LED light fitting /1X6W Wall Lamp Chrome Finsh white/warm white light connecting up with three core flexible copper conductor cable of suitable size Make Jaquar cat part No. DWL-CHR-WL5048X6W. |
| 74 | Suuply and fixing clad socket single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps , 240 volts and connecting up. |
| 75 | Supply and fix in repairs MCB DB 4 way vertical sheet metal enclosure TPN 415 volts, 50 Hz, with IP-43 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified. . (Note : MCB SP/TPN shall be measured and paid seperately under appropriate items of this schedule all as specified and directed . |
| 76 | Supply and fix in repair MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking down complete all as specified and directed. |
| 77 | Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed |
| 78 | Supply and fix MCB TPN, 240 Volts, 100 Amps, 10 kA rupturing capacity415 Volts complete all as specified and directed including taking down old one all as specified and directed. |
| 79 | Supply and fix in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's.complete all as specified and directed |
| 80 | M & L Sub main wiring with two run single core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia PVC conduit on wall/ceiling in PVC conduit, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall along with one run of 6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion including taking down old wiring etc complete all as directed. Note: (i) Two runs of 4 sqmm and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one RM. (ii) Cutting of chases in the wall of appropriate size shall be carried out with electric cutter machine . (iii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted. |
| 81 | Material and labour point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLSH cables in and including suitable size PVC casing caping or concealed conduit and fittings of medium grade, including pressed steel / PVC terminal switch boxes fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectional area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. |
| 82 | Description all as per Srl item No 81 here in before but for socket outlet point 5 Amp on same board complete all as specified and directed. |
| 83 | Description all as per Srl item No. 81 here in before but for one bell point controlled by bell push complete all as specified and directed. |
| 84 | Description all as per Srl item No. 81 here in before but for socket outlet point 5 Amp on Independent board complete all as specified and directed. |
| 85 | Description all as per serial item No 81 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) complete all as specified and directed. |
| 86 | Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminalcomplete all as specified and directed. |
| 87 | Supply and fixing LED batten fittings 1x 20 Watt complete including LED light driver, holder, LED lamp and connection up to ceiling rose with three core wire fixed to wall with 2 nos PVC block of suitable size including taking down old unserviceable one complete all as specified and directed. |
| 88 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 89 | S & F Wall bracket decorative LED Spot light Light fitting with lamp 10 Watt Aluminium housing complete with necessary connection including taking down old unserviceable one complete all as specified and directed. |
| 90 | S & F LED Luminaries 600mm x 600mm 36 watt, 220 V, AC recessed type with hifg efficiency PMMA diffuser soft galre free light complete with driver, holders and LED lamps suitable for roof ceiling including connecting up with 3 core flexible wire complete all as specified and directed. |
| 91 | Supply and fixing LED security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including bracket, clamps etc complete all as specified and directed. |
| 92 | Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 93 | S & F Exhaust fan 230 volts , 250mm,plastic body including making all electric connection complete all as specified and as directed including cutting of hole on wall and makng good disturbed surface of wall and outer wooden box for fan fix on wall complete all as specified and directed. |
| 94 | Supply and fix in repair MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking down complete all as specified and directed. |
| 95 | Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed. |
| 96 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sq. mm 2 core nominal cross section in service connections |
| 97 | Supply & fixing in repair Garden light/LED Bollard LED lighs fitting of capacity 09 W die-cast aluminium body, 09 watt LED 3000/5700K and toughened glass complete with all accessories incl taking out old unserviceable one all as directed. |
| 98 | M & L Sub main wiring with two run single core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, PVC Casing & Capping wall/ceiling, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall along with one run of 6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion including taking down old wiring etc complete all as directed. Note: (i) Two runs of 6 sqmm and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one RM. (ii) Cutting of chases in the wall of appropriate size shall be carried out with electric cutter machine . (iii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted. |
| 99 | M & L Sub main wiring with two run single core 4 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, on PVC Cassing Capping wall/ceiling ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall along with one run of 4 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion including taking down old wiring etc complete all as directed. Note: (i) Two runs of 4 sqmm and one run of 4 sqmm cable and one run of PVC conduit shall be measured as one RM. (ii) Cutting of chases in the wall of appropriate size shall be carried out with electric cutter machine . (iii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted. |
| 100 | Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I. Please Enable Macros to View BoQ information |
