Tender For Construction Of Government Rest House Pratapgadh Building At Nashik Tal. Dist. Nashik (Civil And Electrical Works), Nashik-Maharashtra

TDR : 55080960

Tender Notice
BOQ

6 Days Left

Nashik , Maharashtra

Tender Brief : Tender For Construction Of Government Rest House Pratapgadh Building At Nashik Tal. Dist. Nashik (Civil And Electrical Works)

Document Fees
₹ 3540 /-

EMD
₹ 1195000.0 /-

Tender Value
₹ 23.88 Crore /-

Submission Date
21-04-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Dismantling the Reinforced Cement Concrete Concrete Work 1:2:4 and sorting out the materials such as steel Et cetera as directed and stacking them within the specified lead as directed Et cetera complete. (Item No. 46.29)A1) Dismantling Allied Ground Floor
2	A2) Dismantling Allied First Floor
3	A3) Dismantling Allied Second Floor
4	Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts Et cetera (Item No. 46.09)A1) Dismantling Allied Ground Floor
5	A2) Dismantling Allied First Floor
6	A3) Dismantling Allied Second Floor
7	Lowering down the debris obtained from breaking and removing the cement plaster/burnt brick masonry of the first floor by any means without causing dust nuisance and damage to structure, stacking the same as and where directed including cleaning the site complete. (Item No. 46.59)A1) Dismantling Allied Ground Floor
8	Conveying materials obtained from road cutting including all lifts, laying in layers of 20 centimetres. to 30 centimetres. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard proctor density for a lead of 300 metres to 500 metres inclusive, from the site of excavation to the site of deposition as directed. (Item No. 2.26)A1) Dismantling Allied Ground Floor
9	Providing preconstructional antitermite treatment as per Indian Standards 6313(Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper. (Item No. 21.22)A1) Dismantling Allied Ground Floor
10	Providing preconstructional antitermite treatment as per Indian Standards 6313(Part-II) treatment by treating the backfill in immediate contact with foundation at the rate of 5 litres of emulsion concentrate of 1.0 percent of clorophyrifos per square metre of vertical surface area covering 10 years guarantee on bond paper. (Item No. 21.23)A1) Dismantling Allied Ground Floor
11	Providing preconstructional antitermite treatment as per Indian Standards 6313(Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper. (Item No. 21.24)A1) Dismantling Allied Ground Floor
12	Providing preconstructional antitermite treatment as per Indian Standards 6313(Part-I) to the soil along the external face of building by punching holes of 1.2 of 1.5 Cement Mortar diametre about 30-60 centimetres deep at 15 centimetres c/c as close to the wall as possible and to inject 0.5 percent of aldrin or clorophyrifos at the rate of 7.5 litres per hole and sealing the same with proper filling and covering 10 years guarantee on bond paper. (Item No. 21.25)A1) Dismantling Allied Ground Floor
13	Providing general pest control services to the building to control the nuisance of cockroaches, lizards, pin bores and other insects Et cetera with 4 operations in a year and monthly check up. (Item No. 21.30)A1) Dismantling Allied Ground Floor
14	Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting Et cetera complete.(Lift upto 1.5 metres) By Mechanical Means (Item No. 21.02)B1) Building
15	D) Drainage & Allied
16	Excavation for foundation in Hard murum and boulders including removing the excavated material upto a distance of 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting Et cetera complete.(Lift from 1.5m to 3.0 metres) By Mechanical Means (Item No. 21.12)B1) Building
17	Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/granite/quartzite/gneiss metal for foundation and bedding/steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing Et cetera complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin Et cetera(Wooden centering will not be allowed.), with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) Et cetera complete. With fine aggregate(Crushed sand Vertical Shaft Impactor Grade) (Item No. 24.04)B1) Building
18	Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 centimetres to 20 centimetres including watering and compaction Et cetera complete. (Item No. 21.37)B1) Building
19	Filling in plinth and floors with approved excavated material in 15 centimetres. to 20 centimetres. Layers including watering and compacting Et cetera complete. (Item No. 21.36)B1) Building
20	Providing dry/trap/granite/quartzite/gneiss rubble stone soling 15 centimetres to 20 centimetres thick including hand packing and compacting Et cetera complete. (Item No. 21.38)B1) Building
21	D) Drainage & Allied
22	Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/granite/quartzite/gneiss metal for Reinforced Cement Concrete Concrete work in foundations like raft, strip foundations, grillage and footings of Reinforced Cement Concrete Concrete columns and steel stanchions Et cetera columns as per detailed designs and drawing or as directed including Steel centering formwork, cover blocks laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing Et cetera complete.(Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) Et cetera complete. With fine aggregate(Crushed sand Vertical Shaft Impactor Grade) (Item No. 25.15)B1) Building
23	Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/granite/quartzite/gneiss metal for Reinforced Cement Concrete Concrete columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing Et cetera complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) Et cetera complete. With fine aggregate(Crushed sand Vertical Shaft Impactor Grade) (Item No. 25.35)B1) Building
24	B2) Building First Floor
25	B3) Building Second Floor
26	B4) Building Third Floor
27	B5) Building Fourth Floor
28	B6) Building Fifth Floor
29	B7) Building Sixth Floor
30	Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/granite/quartzite/gneiss metal for Reinforced Cement Concrete Concrete beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing Et cetera complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) Et cetera complete. With fine aggregate(Crushed sand Vertical Shaft Impactor Grade) (Item No. 25.54)B1) Building
31	B2) Building First Floor
32	B3) Building Second Floor
33	B4) Building Third Floor
34	B5) Building Fourth Floor
35	B6) Building Fifth Floor
36	B7) Building Sixth Floor
37	Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/granite/quartzite/gneiss metal for Reinforced Cement Concrete Concrete chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) Et cetera complete. With fine aggregate(Crushed sand Vertical Shaft Impactor Grade) (Item No. 26.07, First Floor)B2) Building First Floor
38	B3) Building Second Floor
39	B4) Building Third Floor
40	B5) Building Fourth Floor
41	Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/quartzite/granite/gneiss metal for Reinforced Cement Concrete Concrete Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with Cement Mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing Et cetera complete.(Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin Et cetera) with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) Et cetera complete. With fine aggregate(Crushed sand Vertical Shaft Impactor Grade) (Item No. 26.26)B1) Building
42	B2) Building First Floor
43	B3) Building Second Floor
44	B4) Building Third Floor
45	B5) Building Fourth Floor
46	B6) Building Fifth Floor
47	Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/granite/quartzite/gneiss metal for Reinforced Cement Concrete Concrete pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) Et cetera complete. With fine aggregate(Crushed sand Vertical Shaft Impactor Grade) (Item No. 26.19)B1) Building
48	B2) Building First Floor
49	B3) Building Second Floor
50	B4) Building Third Floor
51	B5) Building Fourth Floor
52	B6) Building Fifth Floor
53	B7) Building Sixth Floor
54	Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/granite/quartzite/gneiss metal for Reinforced Cement Concrete Concrete slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing Et cetera complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) Et cetera complete. With fine aggregate(Crushed sand Vertical Shaft Impactor Grade) (Item No. 25.74)B1) Building
55	B2) Building First Floor
56	B3) Building Second Floor
57	B4) Building Third Floor
58	B5) Building Fourth Floor
59	B6) Building Fifth Floor
60	B7) Building Sixth Floor
61	Providing and fixing in position Thermo Mechanically Treated-FE-500 bar reinforcement of various diameters for Reinforced Cement Concrete Concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches Et cetera as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. (Item No. 26.33)B1) Building
62	B2) Building First Floor
63	B3) Building Second Floor
64	B4) Building Third Floor
65	B5) Building Fourth Floor
66	B6) Building Fifth Floor
67	B7) Building Sixth Floor
68	D) Drainage & Allied
69	Providing second class Burnt Brick masonry with conventional/Indian Standards type bricks in cement mortar 1:6 in foundations and plinth of inner walls/in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering Et cetera Complete. (Item No. 27.01)B1) Building
70	Providing second class Burnt Brick masonry with conventional/Indian Standards type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding Et cetera Complete (Item No. 27.05)B1) Building
71	B2) Building First Floor
72	B3) Building Second Floor
73	B4) Building Third Floor
74	B5) Building Fourth Floor
75	B6) Building Fifth Floor
76	B7) Building Sixth Floor
77	Providing internal cement plaster 12milimetres thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing Et cetera complete. (Item No. 32.05)B1) Building
78	B2) Building First Floor
79	B3) Building Second Floor
80	B4) Building Third Floor
81	B5) Building Fourth Floor
82	B6) Building Fifth Floor
83	B7) Building Sixth Floor
84	Providing and applying gypsum plaster(with Gypsum material) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface/or on newly brick surface(Excluding rough cast plaster) in all position including preparing and Finishing the surface scaffolding Et ceteracomplete. (Item No. 32.31)B1) Building
85	B2) Building First Floor
86	B3) Building Second Floor
87	B4) Building Third Floor
88	B5) Building Fourth Floor
89	B6) Building Fifth Floor
90	B7) Building Sixth Floor
91	Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15milimetres thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8milimetres thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding Et ceteracomplete. (Item No. 32.11)B1) Building
92	B2) Building First Floor
93	B3) Building Second Floor
94	B4) Building Third Floor
95	B5) Building Fourth Floor
96	B6) Building Fifth Floor
97	B7) Building Sixth Floor
98	Providing and laying vitrified mirror/glossy finish tiles decorative type having size 590Mili meters to 605milimetres x 590Mili meters to 605milimetres of 8 to 10Mili meters thickness and confirming to Indian Standards. 15622-2006(group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing Et cetera complete. (Item No. 33.40)B1) Building
99	B2) Building First Floor
100	B3) Building Second Floor
101	B4) Building Third Floor
102	B5) Building Fourth Floor
103	B6) Building Fifth Floor
104	Providing and laying vitrified mirror/glossy finish tiles having size 590Mili meters to 605milimetres x 590Mili meters to 605milimetres of 8 to 10Mili meters thickness and confirming to Indian Standards. 15622-2006(group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing Et cetera complete (Item No. 33.41)B1) Building
105	B2) Building First Floor
106	B3) Building Second Floor
107	B4) Building Third Floor
108	B5) Building Fourth Floor
109	B6) Building Fifth Floor
110	Providing and fixing machine cut machine polished 18milimetres to 20Mili meters thick telephone black/Amba White/Cat bary brown/RBI red/Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning Et cetera complete. (Item No. 33.35)B1) Building
111	B2) Building First Floor
112	B3) Building Second Floor
113	B4) Building Third Floor
114	B5) Building Fourth Floor
115	B6) Building Fifth Floor
116	Providing and laying telephone black/Amba White/Cadburybrown/Ruby red/Ocean Brown granite stone of 18 to 20Mili meters thick for door frame/dado/window boxing Et cetera On Cement Mortar 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, Et cetera complete. (Item No. 33.68)B1) Building
117	B2) Building First Floor
118	B3) Building Second Floor
119	B4) Building Third Floor
120	B5) Building Fourth Floor
121	B6) Building Fifth Floor
122	Providing and laying Antiskid Ceramic tiles of approved quality of size 30 centimetres x 30 centimetres and confirming to Indian Standards 15622-2006(Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing Et cetera complete. (Item No. 33.67, First Floor)B2) Building First Floor
123	B3) Building Second Floor
124	B4) Building Third Floor
125	B5) Building Fourth Floor
126	B6) Building Fifth Floor
127	Providing and laying ceramic tiles having size 30 centimetres. x 60 centimetres. confirming to corresponding Indian Standards for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/colour cement slurry cleaning curing Et cetera complete. (Item No. 33.27, First Floor)B2) Building First Floor
128	B3) Building Second Floor
129	B4) Building Third Floor
130	B5) Building Fourth Floor
131	B6) Building Fifth Floor
132	Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. (Item No. 32.34)B1) Building
133	B2) Building First Floor
134	B3) Building Second Floor
135	B4) Building Third Floor
136	B5) Building Fourth Floor
137	B6) Building Fifth Floor
138	B7) Building Sixth Floor
139	Providing and applying priming coat on concrete/masonary/Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required Et cetera complete. (Item No. 35.21)B1) Building
140	B2) Building First Floor
141	B3) Building Second Floor
142	B4) Building Third Floor
143	B5) Building Fourth Floor
144	B6) Building Fifth Floor
145	B7) Building Sixth Floor
146	Providing and applying Royale Luxury Emulsion of approved make on internal wall surface as detailed below Scrapping for surface with emery paper and wipe clean for area. wall primer with brush by adding mineral turpentine oil by 8 to 10 % or water by 15 to 20% allowing to dry for 6 to 8 hoursAfter applying acrylic wall putty with appropriate prpportion of water of allow to dry for period of 4 to 6 hours of activity. Scrapping with emery paper and wipe clean Applying paints Royale Luxury emulsion 1st coat with brush water content water 40 to 45% or 65 to 70% by role Applying paints Royale luxury emulsion 2nd coat with brush with water content 40 to 45% or 65 to 70 % by roller.(With prior approval of S.E.) (Item No. 36.21)B1) Building
147	B2) Building First Floor
148	B3) Building Second Floor
149	B4) Building Third Floor
150	B5) Building Fourth Floor
151	B6) Building Fifth Floor
152	B7) Building Sixth Floor
153	Providing and applying white-wash in two coats on old/new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down Et cetera complete. (Item No. 36.03)B1) Building
154	B2) Building First Floor
155	B3) Building Second Floor
156	B4) Building Third Floor
157	B5) Building Fourth Floor
158	B6) Building Fifth Floor
159	B7) Building Sixth Floor
160	Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases(NOx, VOC's, CO, SOx, formaldehydes, Et cetera) in presence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide. and Absorbs CO2(4.8 Kilogram/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company technologist. (Item No. 50.79)B1) Building
161	B2) Building First Floor
162	B3) Building Second Floor
163	B4) Building Third Floor
164	B5) Building Fourth Floor
165	B6) Building Fifth Floor
166	B7) Building Sixth Floor
167	Providing and fixing frame with/without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300Mili meters x 40Mili meters x 5milimetres with oil painting, Et cetera complete (Item No. 39.01, First Floor)B2) Building First Floor
168	B3) Building Second Floor
169	B4) Building Third Floor
170	B5) Building Fourth Floor
171	B6) Building Fifth Floor
172	Providing and fixing Country cut teak wood double or single leaf second class fully panelled door shutter with 35milimetres thick style and rail with 25milimetres thick panels with openable fan light as per detailed drawings. Excluding the door frame 60Mili meters x 100Mili meters stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats.(Excluding the door frame) (Item No. 39.04)B1) Building
173	B2) Building First Floor
174	B3) Building Second Floor
175	B4) Building Third Floor
176	B5) Building Fourth Floor
177	B6) Building Fifth Floor
178	Providing and Fixing 30MM thick BOTH SIDE PRELAMINATED SOLID PANEL Polyvinyl chloride DOOR SHUTTER consisting of frame made out of M.S tubes of 19 guage thickness and, size 19 x 19milimetres for styles and 15 x15milimetres for the top and bottom rails, M.S frame shall have a coat of metel primer of approved make and manufacture. M.S frame shall be covered with heat mouled Polyvinyl chloride 'C' channel made from 5mm(+/0.25) thick prelaminated sheet of density 600 Kilogram/cbm, of size 30Mili meters thickness 70Mili meters width out of which 50Mili meters shall be flat and 20Mili meters shall be tapered in 45? angle on either side forming stiles and 5milimetres thick, 95milimetres wide Polyvinyl chloride sheet out of which 75milimetres shall be falt and 20Mili meters shall be tapered in 45 on the inner side to form top and bottom rail and 115milimetres wide Polyvinyl chloride sheet out of which 75milimetres shall be falt and 20Mili meters shall be tapered on both sides to form lock rail.Top, bottom and lock rail shall be provided either side of the panel. An additional 5mm(+/0.25) thick Polyvinyl chloride strip of 20Mili meters width is to be stuck on the bottom side of the ' c ' channel prelaminated paneling of 5mm(+/0.25) thick Polyvinyl chloride sheet to be fitted inside the Mild Steel frame welded/sealed to the styles and rails with 5mm(+/0.25) x 30Mili meters Polyvinyl chloride sheet beading on either side and joined together with solvent cement adhesive etc, 10Mili meters thickness(5mm(+/0.25) x 2 nos) 20Mili meters wide cross Polyvinyl chloride sheet as gap insert for the rail and bottom rail. Door to be fixed to frames with 3 nos Mild Steelpowder coated but hinges of size 100Mili meters x 25MM x 2milimetres using 32milimetres long steel screws drilled suitable to pass through both the walls of the M.S tube. Other hardwares (Item No. 39.47, First Floor)B2) Building First Floor
179	B3) Building Second Floor
180	B4) Building Third Floor
181	B5) Building Fourth Floor
182	B6) Building Fifth Floor
183	Providing and fixing of factory made uPolyvinyl chloride Sliding window & door(White Colour) complete, comprising uPolyvinyl chloride multi-chambered frame having in-built uPolyvinyl chloride roller track on top and uPolyvinyl chloride sash with wall thickness of 2.3mm(+-0.2mm), duly reinforced with Galvanised Iron. section 1.5mm, wherever required. uPolyvinyl chloride window & door profile shall be made in India & shall conform to British Standard EN 12608 and other standards as mentioned below: S.No. Name of the test Test Method Specified Parameter 1 Tensile Impact Strength Indian StandardsO 8256-more than 700Kj/m2 2 Vicat Softening Temperature EN Indian StandardsO 306 Shall not be < 750C 3 Charpy Impact Strength EN Indian StandardsO 179-2 Shall not be < 20KJ/m2 4 Flexural Modulus Elasticity EN Indian StandardsO 178 Shall not be < 2200 N/mm2 5 Mean Breaking Stress for welded corner(a) For the tensile bending test EN 514 Shall not be < 25 N/mm2(b) For the compression bending test Shall not be < 30N/mm2 6 Heat Reversion Test Indian Standards:4985-2000 Shall not be > 2.0 % 7 Surface Spread of flame British Standard : 476-Part 7 Classification 1 8 Ignitability Evaluation British Standard : 476-Part 5 'P' Not easily ignitable 9 Tensile modulus American Society for Testing and Materials D 638 Shall not be < 35 MPa 10 Shear Modulus American Society for Testing and Materials D 732 Shall not be < 220 MPa 11 Tensile Strength EN Indian StandardsO 527 Shall not be < 30 MPa All corners of frame and sash will be fusion welded. After placing 5milimetres Float Annealed glass in the sash, uPolyvinyl chloride glazing bead, interlock, EPDM/TPE gasket, brush shall be provided including touch lock and rollers & proper drainage system shall be provided. Window/Door will be fixed to the wall with 100Mili meters long and 8milimetres dia. Fasteners and complete in all respect as per direction of Engineer-In-Charge. uPolyvinyl chloride Window and Door Profiles are warranted for a period of ten(10) years against non-uniform discoloration, wrapping and rotting under general use. :: 3 Track with Mesh-2 Glass Sash + 1 Mesh Sash(Each sash shall be half of width of window)(Big Series) Window frame of size 122 x 54milimetres & Sash of size 64 x 47 milimetres (Item No. 54.08c, First Floor)B2) Building First Floor
184	B3) Building Second Floor
185	B4) Building Third Floor
186	B5) Building Fourth Floor
187	B6) Building Fifth Floor
188	Providing and fixing mild steel grill work for windows, ventilators Et cetera 20 Kilogram/square metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. (Item No. 40.01)B2) Building First Floor
189	B3) Building Second Floor
190	B4) Building Third Floor
191	B5) Building Fourth Floor
192	B6) Building Fifth Floor
193	Providing and fixing 900Mili meters high S.S.304 Grade Stainless steel railing with 40Mili meters diameter and 1.5milimetres thick at top, 40Mili meters diameter and 1.5milimetres thick vertical supports spaced at 1.5m center to center and 8milimetres thick toughened glass including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe Et cetera complete (Item No. 40.07)B1) Building
194	B2) Building First Floor
195	B3) Building Second Floor
196	B4) Building Third Floor
197	B5) Building Fourth Floor
198	B6) Building Fifth Floor
199	Providing and laying in position flooring of telephone black/Amba White/Cat bary brown/Ruby red/Ocean Brown granite stone of approved shade and size 18milimetres to 20Mili meters thick on bed 1:6 cement mortar including cement floats striking joints, pointing in Cement Mortar 1:3 curing and cleaning Et cetera complete. (Item No. 33.34)B1) Building
200	B2) Building First Floor
201	B3) Building Second Floor
202	B4) Building Third Floor
203	B5) Building Fourth Floor
204	B6) Building Fifth Floor
205	Providing water proof bedding for flooring of Bath and Water Closet 25milimetres thick in Cement Mortar 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/-including ponding test Et cetera complete. (Item No. 31.05, First Floor)B2) Building First Floor
206	B3) Building Second Floor
207	B4) Building Third Floor
208	B5) Building Fourth Floor
209	B6) Building Fifth Floor
210	Providing cement based water proofing treatment to terraces(Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in Cement Mortar1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with Cement Mortar1:3 admixed with approved water proofing compound and finally top finishing with average 20 milimetres thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300Mili meters x 300 milimetres making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/-including ponding test Et cetera complete. (Item No. 31.04, Fifth Floor)B6) Building Fifth Floor
211	Providing and fixing Polyvinyl chloride Rain water pipes of 160Mili meters outer diameter and having wall thickness of 2.2 to 2.7milimetres confirming to Indian Standards 13592-1992 including proper rainwater receiving recess with Polyvinyl chloride plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25milimetres to 40Mili meters from face of wall a fixing with clips of approved quality and number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on Cement Concrete or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the Polyvinyl chloride fittings and additional 2 piece socket clips shall be got approved from engineer in charge Et cetera complete. (Item No. 42.85, Fifth Floor)B6) Building Fifth Floor
212	Providing and fixing white european type wall-hung pan, of size 350Mili meters x 355milimetres x 570Mili meters concealed flush tank with floor-mounting frame installing kit and drain pipe connection set for wall hung WC, with approved make square control plates including soil pipe, vent pipe upto the outside face of wall, 100Mili meters dia C.I. plug bend inlet pipe all fittings, cutting & making good walls, floors Et cetera complete. (Item No. 48.41, First Floor)B2) Building First Floor
213	B3) Building Second Floor
214	B4) Building Third Floor
215	B5) Building Fourth Floor
216	B6) Building Fifth Floor
217	Providing and fixing oval type under counter wash hand basin of 16 inch x 22 inch size and of special colour shade having telephonic black/coloured granite of 180Mili meters thick stone black kadappa framework including chromium plated coupling bottle-Trap using CERA company or equivalent oval typa wash basin model no 3448 as per detailed drawing or as directed by engg incharge etc complete.(Counter size 1.20metres x 0.60 m) (Item No. 42.88, First Floor)B2) Building First Floor
218	B3) Building Second Floor
219	B4) Building Third Floor
220	B5) Building Fourth Floor
221	B6) Building Fifth Floor
222	Providing and constructing granite kitchen platform with fixing of stainless steel sink 600Mili meters x 450Mili meters size as per detailed drawing including vertical both side polished kadappah stone 25 to 30Mili meters thick supports with kadappah top 35 to 40Mili meters thick and polished granite 16 to 20Mili meters top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 centimetres height and top granite of 75 x 40 centimetres including cutting, opening for sink of required size in kadappah as well as granite Et cetera complete.(Platform top size 5.00metres x 0.60metres and height is 0.75 m) (Item No. 41.78, First Floor)B2) Building First Floor
223	B3) Building Second Floor
224	B4) Building Third Floor
225	B5) Building Fourth Floor
226	B6) Building Fifth Floor
227	Providing and fixing black kadappa stone as shelves 25 milimetres thick machine polished, extending the polish upto 20 centimetres width on lowerside, rounding corners, laying in position jointing with bedding cement mortar 1:4 proportion curing etc Et cetera complete. (Item No. 33.23, First Floor)B2) Building First Floor
228	B3) Building Second Floor
229	B4) Building Third Floor
230	B5) Building Fourth Floor
231	B6) Building Fifth Floor
232	Providing and fixing White Glazed Earthenware full stall type Urinal with Polyvinyl chloride flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32milimetres diameter Polyvinyl Chloride flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall (Item No. 41.57, First Floor)B2) Building First Floor
233	Providing and fixing on walls/ceiling/floor 15milimetres diameter Chlorinated Polyvinyl chloride pipe with necessary fittings, remaking good the demolished portion Et cetera complete. Including removing existing pipe line if necessary and conveying and stacking the same in Public Works Department chowky or as directed Et cetera complete. (Item No. 42.55, First Floor)B2) Building First Floor
234	B3) Building Second Floor
235	B4) Building Third Floor
236	B5) Building Fourth Floor
237	B6) Building Fifth Floor
238	Providing and fixing on walls/ceiling/floor 20milimetres diameter Chlorinated Polyvinyl chloride pipe with necessary fittings, remaking good the demolished portion Et cetera complete. Including removing existing pipe line if necessary and conveying and stacking the same in Public Works Department chowky or as directed Et cetera complete. (Item No. 42.56, First Floor)B2) Building First Floor
239	B3) Building Second Floor
240	B4) Building Third Floor
241	B5) Building Fourth Floor
242	B6) Building Fifth Floor
243	Providing and fixing on walls/ceiling/floor 25milimetres diameter Chlorinated Polyvinyl chloride pipe with necessary fittings, remaking good the demolished portion Et cetera complete. Including removing existing pipe line if necessary and conveying and stacking the same in Public Works Department chowky or as directed Et cetera complete. (Item No. 42.57, First Floor)B2) Building First Floor
244	B3) Building Second Floor
245	B4) Building Third Floor
246	B5) Building Fourth Floor
247	B6) Building Fifth Floor
248	Providing and fixing on walls/ceiling/floor 32milimetres diameter Chlorinated Polyvinyl chloride pipe with necessary fittings, remaking good the demolished portion Et cetera complete. Including removing existing pipe line if necessary and conveying and stacking the same in Public Works Department chowky or as directed Et cetera complete. (Item No. 42.58, First Floor)B2) Building First Floor
249	B3) Building Second Floor
250	B4) Building Third Floor
251	B5) Building Fourth Floor
252	B6) Building Fifth Floor
253	Providing and laying in trenches 40Mili meters diameter Chlorinated Polyvinyl chloride pipe including necessary excavation, fittings. Refilling trenches Et cetera complete. Including removing existing pipe line if necessary and conveying and stacking the same in Public Works Department chowky or as directed Et cetera complete. (Item No. 42.65, First Floor)B2) Building First Floor
254	B3) Building Second Floor
255	B4) Building Third Floor
256	B5) Building Fourth Floor
257	B6) Building Fifth Floor
258	Providing and fixing on walls/ceiling/floor 50Mili meters diameter Chlorinated Polyvinyl chloride pipe with necessary fittings, remaking good the demolished portion Et cetera complete. (Item No. 42.60)B1) Building
259	B2) Building First Floor
260	B3) Building Second Floor
261	B4) Building Third Floor
262	B5) Building Fourth Floor
263	B6) Building Fifth Floor
264	Providing and making Indian Standard Mark ferrule connection of 50Mili meters dia. to water main including ferrule coupling cast iron bell mouth cover, built in non return valve and fixing including excavation and reinstatement complete. (Item No. 42.77, Fifth Floor)B6) Building Fifth Floor
265	Providing and fixing 50Mili meters diameter water meter with non-return valve including strainer, sockets/union nut and including water meter box making locking arrangement and lock. [without chamber] (Item No. 41.30)B1) Building
266	Providing and laying in trenches 50Mili meters diameter Chlorinated Polyvinyl chloride pipe including necessary excavation, fittings. Refilling trenches Et cetera complete. Including removing existing pipe line if necessary and conveying and stacking the same in Public Works Department chowky or as directed Et cetera complete. (Item No. 42.66)B1) Building
267	Providing and fixing 10 centimetres Polyvinyl chloride nahani trap with grating Et cetera complete. (Item No. 42.67, First Floor)B2) Building First Floor
268	B3) Building Second Floor
269	B4) Building Third Floor
270	B5) Building Fourth Floor
271	B6) Building Fifth Floor
272	Providing, laying and fixing Polyvinyl chloride pipe of 110 milimetres dia. with fittings such as bends, tees, reducers, clamps, Et cetera including necessary excavation, trench filling Et cetera complete. Including removing existing pipe line if necessary and conveying and stacking the same in Public Works Department chowky or as directed Et cetera complete. (Item No. 42.28)B1) Building
273	Providing and fixing Chrome PolishedTwo way BIB cock of approved make continental including necessary sockets/union nut Et cetera complete. (Item No. 42.80)B2) Building First Floor
274	B3) Building Second Floor
275	B4) Building Third Floor
276	B5) Building Fourth Floor
277	B6) Building Fifth Floor
278	Providing and fixing Chrome Polished pillar cock long neck with aerator of approed make including necessary sockets/union nut Et cetera complete. (Item No. 42.82, First Floor)B2) Building First Floor
279	B3) Building Second Floor
280	B4) Building Third Floor
281	B5) Building Fourth Floor
282	B6) Building Fifth Floor
283	Providing and fixing 450Mili meters x 550Mili meters size superior type Belgium mirror with 16milimetres diameter nickel plated towel rod Et cetera complete. (Item No. 42.20, First Floor)B2) Building First Floor
284	B3) Building Second Floor
285	B4) Building Third Floor
286	B5) Building Fourth Floor
287	B6) Building Fifth Floor
288	Providing and fixing stainless steel sink of size 600 x 510 x 200Mili meters incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing Et cetera complete. (Item No. 42.78, First Floor)B2) Building First Floor
289	B3) Building Second Floor
290	B4) Building Third Floor
291	B5) Building Fourth Floor
292	B6) Building Fifth Floor
293	Providing and fixing 15milimetres diameter Polyvinyl chloride Aqua kraft type of approved make super jet spray with flange 2 in 1 faucet 1.50 metre long including all accessories etc complete (Item No. 43.39, First Floor)B2) Building First Floor
294	B3) Building Second Floor
295	B4) Building Third Floor
296	B5) Building Fourth Floor
297	B6) Building Fifth Floor
298	Providing and laying for 150Mili meters dia salt glazed stoneware pipe including fittings Such as bends, tees, single junction, double junctions laying, jointing(including excavation and refilling the trenches) complete. (Item No. 42.04)B1) Building
299	Providing and fixing divertor with overhead shower, shower arm, spout, hand shower with wall bracket having flow rate up to 12 liters/minutes of Jaquar/Cera/Hindware/Perryware or equivalent make including all necessary pipes, fittings Et ceteracomplete as directed by Engineer In Charge.(Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.) (Item No. 48.33)B2) Building First Floor
300	B3) Building Second Floor
301	B4) Building Third Floor
302	B5) Building Fourth Floor
303	B6) Building Fifth Floor
304	Providing and fixing High Density Polyethylene container one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters (Item No. 42.53, Sixth Floor)B7) Building Sixth Floor
305	Providing, fabricating and erecting at site of work the tubular steel structure(shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required Et cetera as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade Et cetera complete. Spec. number : As directed by Engineer-in-charge. (Item No. 23.07, Second Floor)B3) Building Second Floor
306	Providing and fixing heavy duty inter locking concrete RUBBER MOULD GLOSSY PAVING BLOCKS of 60 millimeter thickness of having a strength of 400 Kilogram/square meter of approved quality and shape on a bed of crushed sand of 25 to 30 millimeter thick including striking joints and cleaning etc. complete.(using 100% crushed sand) (Item No. 33.53)B1) Building
307	Providing and laying in situ cement concrete M30 with tremix treatment for 200Mili meters thickness for flooring with groove cutting of 4milimetres wide and 20Mili meters deep with necessary refilling with bitumen Et cetera complete. (Item No. 33.31)B1) Building
308	Providing internal cement plaster 20 milimetres thick in Single coats in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing Et cetera complete. (Item No. 32.08)B1) Building
309	B7) Building Sixth Floor
310	Providing fine cement finish 1.5milimetres thick over green plaster surface including scaffolding curing Et cetera complete. (Item No. 32.21)B1) Building
311	B7) Building Sixth Floor
312	GARDEN SOIL: Supplying on site garden soil well sieved 80 % to pass through Indian Standards sieve of 10 milimetres size free from stones rubbish like dried grass roots and other such materials. The soil should be fresh from quarry. The color of the soil generally is red. The soil will be measured by measuring box. (Farma) Item includes Transporting, loading -unloading etc (.Lead charges per 15 kilo metres considered Excluding royalty.)B1) Building
313	Providing and fixing lioghtening conductor system comprising of erecting Air-Termination consisting of tubular copper rod of 25milimetres dia. 1.2milimetres thick with multiple points head 1.2 meter long(Heavy Duty) welded or clamped to Galvanised Iron. pipe pole B grade 50Mili meters diaof requiired length with Mild Steel round bnase plate 25 Cm diam and 10Mili meters thick at bottom embeded in cement concrete 1:3:6 dfoundation of size 45 centimetres diam x 45 centimetres Height and providing earthing with copper earth plate of size 60 x 60 x 0.3 centimetress with cadmium plated nut bolts to fix earthing strip burried in specially prepared earth pits 1.5 metre below ground level with 40Kilogramcharcoal and salt with altemate layers of charcoal and salt and Galvanised Iron.pipe 40Mili meters dia 2 meter length burried in earthe upto earthling plate remining portion above ground level for watering and refilling comcpete Note-Copper strip fropm lightening conductor is not considered in this ite metres (Item No. 44.18)B1) Building
314	Providing and fixing copper strip 25milimetres wide and 3milimetres thick for lightening conductor including fixing with screws required scaffolding Et ceteracomplete Note-Lightening conductor and earthinf pits is not considered in this item (Item No. 44.19)B1) Building
315	Providing and fixing 45 centimetres wide mild steel ladder of 40Mili meters x 6milimetres mild steel flat stringers and steps of 18milimetres dia. mild steel bar for water tank including fixing it in(1:2:4) M-15 cement concrete block 60 centimetres x 30 centimetres x 30 centimetres and painting the ladder complete.(Anti Corossive Paint) (Item No. 41.56)B1) Building
316	Providing and fixing 22 Birmingham Wire Gauge plain Fiber Reinforced Plastic sheets on top of weather shed, including scaffolding, fixing by means of nut and bolts or as directed Et cetera complete.(Brackets of 70 x 45milimetres to be paid separately) (Item No. 39.89, Fifth Floor)B1) Building
317	Providing and fixing Mild Steel grill door 24 Kilogram/square metre of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etc (Item No. 39.31, Sixth Floor)B1) Building
318	Providing and fixing board displaying information, such as \\"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\\", having rectangular shape of 1.80metres x 1.20metres size made up of 4milimetres aluminum composite pannel sheet with 0.5milimetres skin thickness on either side bonded with white retro reflective sheeting of Class C(Type XI Micro prismatic grade sheeting) having pressure sensitive adhesive. Retro reflective sheeting with specified backilogramround, border and back side reto reflective symbols, letters, numerals, arrow as per Indian Roads Congress: 67-2012 Table No 8.3, on Mild Steelangle of size 35 x 35 x 3milimetres frame with properly cross braced Mild Steel angles of size 35milimetresx35milimetresx3milimetres duly painted including Two Mild Steel angle iron posts of size 65milimetres x 65milimetres x 6mm, 3.65m long painted with alternate black and white bands of 25 centimetres width including all fixtures Et ceteraand fixing the boards in 1:4:8 concrete block of size 60 centimetres x 60 centimetres x 75 centimetres including, excavation, refilling, transportation, and labour etc complete. Class _C_(Type XI Micro prismatic grade sheeting)) shall have 10 years written warranty from the manufacturer including the Digitally Printed areas with approved printing technology with sheeting manufacturer approved inks and laminated with Ultraviolet overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier. (Item No. 53.87)B1) Building
319	Providing and fixing 90 centimetres x 60 centimetres Granite plate engraving 10 centimetres. Height letter, figures including painting the lefters/figures with approved colour and shade complete (Item No. 44.12)B1) Building
320	Providing and fixing false ceiling with eco-friendly light-weight calcium silicate tiles of spintone surface texture aerolite make or equivalent of size 595milimetres x 595milimetres having 15milimetres thick densified micro look edge and 100% humidity resistance incombustible as per British Standard 46part IV and thermal conductivity 0.043 w/m 0 KC and NRC 0.50 placed in true horizontal level suspended grid of size 600x600Mili meters made from hot dipped Galvanised Iron. steel sections ion silhouette profile, rotary stitched double webbed white with 6milimetres reveal profile(white/black), wherein, main T runner of size 42milimetresx14milimetres between main tee 600Mili meters center-tocenter and secondary cross T of size 33x14x0.43milimetres thick of length 600Mili meters long spaced inter-locked at middle of the first crossed T in each panel to form grid of 1200Mili metersx600Mili meters resting on periphery wall Profile wall section 19mm(7+7) x 19milimetresx0.40thicknesses and laying false ceiling for services like diffusers grills including cutting, making opening for light fittings, fixtures, , smoke detectors Et cetera, wherever required. Main T runners suspended from ceiling with using Galvanised Iron. soffit cleats of size 25x35x1.6milimetres of required length fixed to the ceiling with 6milimetres dia and 50Mili meters long dash fastener, 4milimetres dia Galvanised Iron. adjustable rods with powder-coated/good quality Galvanised Iron. level adjustment clips of 35x35x0.8milimetres spaced @1200, center-to-center along main T all complete at all heights as per the specifications, drawings and as per (Item No. 38.40, Fifth Floor)C1) Furniture Work
321	Supply & Fixing of Rectified Porcelain Stoneware Tiles for Ventilated Facades of Specified size as per specification/site drawings having 6milimetres and 9milimetres thickness with factory made Kerfs(grooves) as per need and size 600/1200 and 800/1600. The Rectified Porcelain Stoneware Tiles shall possess properties having Water absorption < 0.5% Bending Strength > 40 N/mm2 and are resistant to : Ultraviolet Light, chemicals, smog, thermal shocks & bacteria. The facade will be made from Nexion Rectified Porcelain Stoneware Tiles(Sintered Compact Surfaces) specified as per Indian StandardsO 13006 : Annex G-EN 14411 : Annex G : Dry Pressed Ceramic Tiles and all the tests carried out by Italian labs accredited according to Indian StandardsO/International Electrotechnical Commission 17025 : 2005. The Terramilano Fixing sub structure will confirm to Norme Tec niche per le Costruzioni NTC/8(Technical Standard for construction) guidelines for construction in Italy, Eurocode 0 \\" Information on the method of semi-probabilistic limit states and safety factor \\" Euro coad 1 \\" Determination and calculation of actions on structure \\" Euro 9 \\" Project aluminum structures \\" UNI 11018 and ETAG 034 The Substructure will consists of Upright extruded aluminum profile TruSt80, alloy 6060 T5 thickness equal to 1.5 to 2milimetres and dimension 80 x 110metresm, inter axis 80 centimetres of Length 3660metresm, 8085 Aluminum box Section of 1 x 3 inch, 1x2inch and 1x 5 inch of length 3660Mili meters and thickness 1.5 to 2milimetres as per need. Brackets St80 galvanized steel and aluminum of 80Mili meters x 60metresm, aluminum L bracket size 1.5 x 1.5 inch and 1 x 2.5 inch thickness 3milimetres that allow to anchor the vertical stand to the Building, 9mm/6milimetres S10 Hooks Harmonic Stainless Steel AIndian StandardsI 304 which supports the weight of the Tiles; Bossong/Hilti Mechanical Fasteners and Nylon Anchor Fastner; and Structural Sealant of 3M for Ventilated Facade. Packing of Edges and corner with window seal with ACP of appoved make for water Proofing and alteration. Inclusive of scaffolding and fixing. The installation method differ according to the structure of building and design. For EXTERNAL AND INTERNAL CLADDING OF STRUCTURE. with prior approval of concerned Superitending Engineer. (Item No. 50.12)C1) Furniture Work
322	Sofa Set 3+1+1 Providing & fixing Sofa Set 3+1+1 Brown and Cream leather DIMENSION Length: 182.5( centimetress) Breadth( centimetress): 100( centimetress)Height( centimetress): 100( centimetress) Weight(Kilograms): 66(Kilogram) Seating Capacity: Five Seat (Item No. 51.53)C1) Furniture Work
323	C2) Furniture Work First Floor
324	C3) Furniture Work Second Floor
325	C4) Furniture Work Third Floor
326	C5) Furniture Work Fourth Floor
327	C6) Furniture Work Fifth Floor
328	Wardrobe with Mirror @ 900LX 600DX 1965H Providing and Fixing Wardrobe with Mirror of size 900LX 600DX 1965H The wardrobe side panels and doors are made up of 18milimetres thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2milimetres thick Polyvinyl chloride edge Banding. The shelves are made of 18milimetres thick Prelam Particle Board with decorative laminate on both sides. The top is made of 36milimetres prelam particle board with decorative laminate on both sides.(18milimetres Prelam Particle board and 18milimetres batons on all sides to achieve 36milimetres overall thickness). The exposed edges of the top are sealed with 2milimetres thick Polyvinyl chloride edge Banding. The top most part of the wardrobe has an aluminum hanger rod of EBCO make. One drawer of size 400(W) x 150(H) x 450(D) made of 18milimetres thick prelam Particle Board has been considered. The drawer will have a multipurpose lock of EBCO premium make. The wardrobe handles are Satin SS finish of 160Mili meters pitch. The wardrobe has a multipurpose lock of EBCO make. All hinges considered are Hettich make. Necessary good quality hardwares have been considered as required. (Item No. 51.57, Second Floor)C3) Furniture Work Second Floor
329	C4) Furniture Work Third Floor
330	C5) Furniture Work Fourth Floor
331	C6) Furniture Work Fifth Floor
332	Single Bed @ 2025LX 1000DX 650H Providing and fixing Single Bed of Size 2025Lx1000Dx650H with matress and pillow. Understructure:-The legs are made of Square tube of size 25 x 25milimetres made out of MS with a thickness of 1.2 milimetres The legs should have corner brackets welded to it at two levels. The corner brackets are made of 2milimetres thick CRCA having a L shaped structure to join the side panels and headboard to the leg. Three nos. of Horizontal stiffeners are provided at equal intervals. The stiffeners are made of Square tube of size 25 x 25milimetres made out of MS with a thickness of 1.2 milimetres The middle Horizontal Stiffener has a leg attached to it to transfer the load to the ground and add to the strength and stability of the complete structure. This leg is also made of Square tube of size 25 x 25milimetres made out of MS with a thickness of 1.2 milimetres All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT.Side Panel:-The side panels are made up of 18milimetres thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2milimetres thick Polyvinyl chloride edge Banding. The overall width of the side panel is 150 milimetres The side panels have 18milimetres thick prelam particle board Baton running for required length to add rigidity to the structure. Head Board :-The head board is made up of 18milimetres thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2milimetres thick Polyvinyl chloride edge Banding. The head board size to be considered as 1000 x 650 milimetres Foot Board :-The foot board is made up of 18milimetres thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2milimetres thick Polyvinyl chloride edge Banding. The head board size to be considered as 1000 x 450 milimetres Bed Base:-The Bed Base is made up of 12milimetres thick Prelam Particle Board with both side White laminate. (Item No. 51.55, First Floor)C2) Furniture Work First Floor
333	Bed Side Table @ 400LX 400DX 415H Providing and Fixing Bed Side Table of size 400LX 400DX 415H The bed side unit is made up of 18milimetres thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2milimetres thick Polyvinyl chloride edge Banding. The bed side table has one drawer and one shelf. The shelf is made of 18milimetres thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2milimetres thick Polyvinyl chloride edge Banding (Item No. 51.58, First Floor)C2) Furniture Work First Floor
334	C3) Furniture Work Second Floor
335	C4) Furniture Work Third Floor
336	C5) Furniture Work Fourth Floor
337	Tea Table 900Mili meters X 750Mili meters X 450Mili meters for metress. ante chamber Providing And Fixing Of Tea Table 900Mili meters X 750Mili meters X 450Mili meters With 12milimetres Thick Colour Eitched Tempered Glass With Bevelled Drawing Made Out Of 18milimetres Thick Waterproofing Ply. The Outer Laces To Be Finished With High Quality 4 Mm Thik Veneer Or 1 Mm Thik Mica Et cetera (Item No. 51.54, First Floor)C2) Furniture Work First Floor
338	C3) Furniture Work Second Floor
339	C4) Furniture Work Third Floor
340	C5) Furniture Work Fourth Floor
341	C6) Furniture Work Fifth Floor
342	Dining Table @ 1800 x 900 x 750Mili meters Ht. Providing & Fixing of Main Table @ 1800Lx900Dx750HT-made up of 18+18milimetres Thick MDF top with Polyvinyl chloride Membrane finish and waterfall edge profile. Aluminium Anodizied finish beeding of 4milimetres thich is running all over the table top edge. Gable ends is Aerofoiled Shape with front edges in Polyvinyl chloride Membrane finish and rest in Prelaminated MDF with batton structure. Gable ends should be hollow from inside for the provision of passing electrical and Data wiring., MODESTY PANEL:-to be made of 18milimetres thick Prelaminated particle board with Polyvinyl chloride edge band Access Flap:-For Wire manager 1 Nos. (Item No. 51.32, First Floor)C2) Furniture Work First Floor
343	Providing & Arrangemnt of High Back, Synchronized Mechanism with Multiple Locking, Adjustable Armrest, Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Leatherite Upholstery (Item No. 51.40, First Floor)C2) Furniture Work First Floor
344	C3) Furniture Work Second Floor
345	C4) Furniture Work Third Floor
346	C5) Furniture Work Fourth Floor
347	C6) Furniture Work Fifth Floor
348	Providing & Making wooden Panelling made up from 18 milimetres Plywood & Teakwood Bedding Side Patta & 1.50 milimetres thick formica over the Frame Et cetera complete as per detailed Drawing & as directed by Engineer Incharge C2) Furniture Work First Floor
349	C3) Furniture Work Second Floor
350	C4) Furniture Work Third Floor
351	C5) Furniture Work Fourth Floor
352	C6) Furniture Work Fifth Floor
353	Providing & Fixing Aldrop 300Mili meters Chromium plated of approved quality and make to door shutter including removing existing the same in original position making proper adjustment for smooth operation Et cetera complete as per sample approved by Engineer in-charge. (Item No. 46.48, First Floor)C2) Furniture Work First Floor
354	C3) Furniture Work Second Floor
355	C4) Furniture Work Third Floor
356	C5) Furniture Work Fourth Floor
357	C6) Furniture Work Fifth Floor
358	SS Hinges 125milimetres Height, 14 Gauge Heavy Duty (First Floor)C2) Furniture Work First Floor
359	C3) Furniture Work Second Floor
360	C4) Furniture Work Third Floor
361	C5) Furniture Work Fourth Floor
362	C6) Furniture Work Fifth Floor
363	Providing and Fixing Rollar Blinds AMI Make or approved make & shade of 38milimetres round Aluminium channel with Blackout fabric & telting with chain(Ball) system with all necessary fixtures and fitting Et cetera complete.(Sample to be final by Engineer In-charge prior execution of work) (Item No. 51.19, First Floor)C2) Furniture Work First Floor
364	C3) Furniture Work Second Floor
365	C4) Furniture Work Third Floor
366	C5) Furniture Work Fourth Floor
367	C6) Furniture Work Fifth Floor
368	Kitchen Trolley Providing and Fixing stainless steel kitchen trolley of overall 26 \\" height and 22\\" depth, supported on aluminium pipes, trolley basket made out of 5milimetres stainless steel rod fitted on telescopic channel of size 1.5 \\" x 20 \\" x 22 \\" on both sides of trolley of 12 \\" or above size, panel having 40Kilogramload bearing capacity of trolley made out of 20Mili meters PUC coated plywood and colour combination as directed by E-I-C.Inner side of panel covered by white mica, 100Mili meters s.s. decorative handle.(The width and height of individual compartments shall be kept as directed by Engineer-in-charge) (Item No. 51.59, First Floor)C2) Furniture Work First Floor
369	C3) Furniture Work Second Floor
370	C4) Furniture Work Third Floor
371	C5) Furniture Work Fourth Floor
372	C6) Furniture Work Fifth Floor
373	Supply, fixing and installation of 4milimetres thick Aluminium Composite Panel(ACP) of approved colour for external cladding in combination of solid and metallic colours, including all necessary Framework, support and complete weather sealing as per architectural drawing. The Aluminium Composite Panel(ACP) should be made out of thermoplastic core of low-density polyethylene Low-density polyethylene(100% virgin mix), sandwiched between two aluminium sheets of ALLOY GRADE-5000 series, each not less than 0.50Mili meters thick, total thickness of aluminium composite panels not to be less than 4mm, the exposed surface thereof shall have Stove lacquered finishing coat not less than(26 +-2) micron(containing minimum 70% kynar 500 based PVDF) of colour and shade as per architectural design. The inside surface(facing the building exterior surface)shall have polyster based powder coating not less than 25 Micron with protective peel-off foil on the exterior face(peel off film will in no case leave any adhesive mark over the composite panel surface after it is peeled off). The supporting framework shall be made out of 50Mili meters X25milimetres X 3milimetres thick Aluminium section to be spaced horizontally and vertically for fixing of panel of size 900Mili meters X 1200Mili meters and fixed to the building structure as per design through 50Mili meters X50Mili meters X5milimetres MS angle clamps prefixed to masonry or slab, columns with Hilti make anchor fastener screws. The fixing of panel to be done with the help of VHB tapes and screws and all the sealing of joints to be done with weather sealent Silicon as directed by Engineer-in-charge.(Prior permission of S.E. is necessary before inclusion of this item in estimate) (Item No. 51.235)C1) Furniture Work
374	C2) Furniture Work First Floor
375	C3) Furniture Work Second Floor
376	C4) Furniture Work Third Floor
377	C5) Furniture Work Fourth Floor
378	C6) Furniture Work Fifth Floor
379	Public Seating Chair.-3 Seater Providing and Fixing 3 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish. (Item No. 51.44)C1) Furniture Work
380	Credestal @ 1200Lx450Lx650HT Providing & Fixing of LOW HEIGHT CREDESTAL @ 1200L X 450D X 650H :-To be made out of Membrane Finish(2 Openable Shutter & 3 Drawer Pedestal in between)as per drawing. (Item No. 51.23, First Floor)C2) Furniture Work First Floor
381	C3) Furniture Work Second Floor
382	C4) Furniture Work Third Floor
383	C5) Furniture Work Fourth Floor
384	C6) Furniture Work Fifth Floor
385	Book Case with Glass Shutter @ 825Lx300Dx1650HT Providing & Fixing of Book Case with Glass Shutter @ 825Lx300Dx1650HT:-To be made out of complete body & in 0.7milimetres thick CRCA & Shutter in 1.2milimetres thick CRCA with glass pannel in Powder coating finish as per drawing. (Item No. 51.39, First Floor)C2) Furniture Work First Floor
386	C3) Furniture Work Second Floor
387	C4) Furniture Work Third Floor
388	C5) Furniture Work Fourth Floor
389	C6) Furniture Work Fifth Floor
390	Providing and fixing 3.5 to 4milimetres thick Veneer finish wall Panaling made out of 50 x 25mm(finished size) Cement ConcreteT.W. frame work or size of 600 x 600Mili meters center or as per site condition covered by 6milimetres thick marine plywood of the generally confiriming to I:S 710-1980 finished with 3.5 to 4milimetres thick matching Veneer of approved color and in satin wallnut groov matched veneer pattern and design including melamine polishing & design with antitermite treatment Et cetera to plywood and woodwork with ten years guarantee bond Et cetera including all lead and lifts complete as per Architects Drawing and instructions of Engineer Incharge. (Item No. 37.26, First Floor)C2) Furniture Work Second Floor
391	C4) Furniture Work Third Floor
392	C5) Furniture Work Fourth Floor
393	C6) Furniture Work Fifth Floor
394	Providing & Fixing in position, Carpet more than 800+ gsm, made with100% stain proof fibres of approved make along with 5milimetres underlay as per Architectural & Acoustical Design & Instructions & Complete in all aspects including all materials labour, finishing etc complete (Item No. 51.13, Fifth Floor)C6) Furniture Work Fifth Floor
395	Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/granite/quartzite/gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) Et cetera complete. With fine aggregate(Crushed sand Vertical Shaft Impactor Grade) (Item No. 24.01)D) Drainage & Allied
396	Providing and laying in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for Reinforced Cement Concrete Concrete work in foundations like raft, strip foundations, grillage and footings of Reinforced Cement Concrete Concrete columns and steel stanchions Et cetera including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided(Excluding reinforcement and structural steel) Et cetera complete, with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) Et cetera complete. With fine aggregate(Crushed sand Vertical Shaft Impactor Grade) (Item No. 25.11)D) Drainage & Allied
397	Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/granite/quartzite/gneiss metal for Reinforced Cement Concrete Concrete pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting, curing, finishing and rougheningthem if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) Et cetera complete. With fine aggregate(Crushed sand Vertical Shaft Impactor Grade) (Item No. 26.17)D) Drainage & Allied
398	Providing and fixing reinforced cement concrete cover of size 90 centimetres x 45 centimetres with frame over inspection chamber Et cetera complete. Heavy duty(225 Kilogram) (Item No. 42.68)D) Drainage & Allied
399	Providing and constructing 75 milimetres thick Modified Penetration Macadam(Modified Penetration Macadam) road surface including all materials, preparing the existing road surface, spreading 40 milimetres stone metal layers 100% crusher broken metal with conical crusher plant heating and spraying the bitumen of specified grade @ 2 Kilogram/square metres, spreading 12 milimetres size chips compacting with three wheel static roller having weight 8 to 10 Metric Tonnes to achive the desired degree of compaction as per Technical Specification Clause 506 Et cetera complete. Including picking of existing Water Bound Macadam surface.(Viscosity Grade-30 bulk bitumen rates are considered to arrive at rates) (Item No. 3.35b)E) Road Improvement
400	BITUMINOUS MACADAM: Proving and laying bituminous macadam using crushed aggregates of Grading 1, premixed with bituminous binder, transported to site with Vessel Traffic Service, laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction for 80/100Mili meters compacted thickness with 3.3 % using specified grade of Bitumen. -- USING Batch mix type hot mix plant with Supervisory Control and Data Acquisition, Sensor Paver, vibratory roller.(Viscosity Grade-30 bulk bitumen rates are considered to arrive at rates) (Item No. 3.40)E) Road Improvement
401	BITUMINOUS CONCRETE:-Providing and laying bituminous concrete using crushed aggregates of grading 1, premixed with bituminous binder @ 5.20 per cent by weight of total mix and filler, transported to site with Vessel Traffic Service, laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction for 50Mili meters compacted thickness with specified grade of Bitumen, Excluding prime/tack coat. For Bitumen of specified grade -- USING Batch mix type hot mix plant with Supervisory Control and Data Acquisition, Sensor Paver, Vibratory roller with Stone Dust filler.(Viscosity Grade-30 bulk bitumen rates are considered to arrive at rates) (Item No. 3.48)E) Road Improvement
402	Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen set footed in bitumen boller on Bitumen surface 2.5kilogram/10square metres.(Viscosity Grade-30 bulk bitumen rates are considered to arrive at rates) (Item No. 3.30)E) Road Improvement
403	Providing and fixing of Glass Fiber Reinforced Concrete (GFRC) material in approved size, pattern, Design, thickness and color. The Jali / specified portion should be made from grade white Portland cement manufactured by J.K. Cement or equivalent having minimum compressive Strength of 40 N/Sqm, Quartz, Fine Silica Sand, Alkali Resistant Glass Fiber manufactured by Nipon or Sant Gobain or Owens corning or equivalent, super plasticizers and polymers manufactured by BASF, Sika, MYK Schomburg or equivalent. The material casting should take place in Synthetic Rubber / FRP Mould manufactured by Reckli or equivalent. The Fixing of Jali should be Dry Fixing ie. to be done with GI Fasteners, dash fasteners, Self- screw and pins on MS Frame or wall/RCC as specified etc. complete. Item includes all materials, labor, necessary tools & plants, required scaffolding shuttering, transportation, all loading & unloading, all specified hardware for fixing the patterns, all applicable taxes, levies, duties, all leads & lifts, water, electricity, shop drawings, curing if any, cleaning etc. completei) GRC Capital as Specified in the DrawingsB) Building
404	Providing and fixing of Glass Fiber Reinforced Concrete (GFRC) material in approved size, pattern, Design, thickness and color. The Jali / specified portion should be made from grade white Portland cement manufactured by J.K. Cement or equivalent having minimum compressive Strength of 40 N/Sqm, Quartz, Fine Silica Sand, Alkali Resistant Glass Fiber manufactured by Nipon or Sant Gobain or Owens corning or equivalent, super plasticizers and polymers manufactured by BASF, Sika, MYK Schomburg or equivalent. The material casting should take place in Synthetic Rubber / FRP Mould manufactured by Reckli or equivalent. The Fixing of Jali should be Dry Fixing ie. to be done with GI Fasteners, dash fasteners, Self- screw and pins on MS Frame or wall/RCC as specified etc. complete. Item includes all materials, labor, necessary tools & plants, required scaffolding shuttering, transportation, all loading & unloading, all specified hardware for fixing the patterns, all applicable taxes, levies, duties, all leads & lifts, water, electricity, shop drawings, curing if any, cleaning etc. completei) GRC BaseB) Building
405	Providing and fixing of Glass Fiber Reinforced Concrete (GFRC) material in approved size, pattern, Design, thickness and color. The Jali / specified portion should be made from grade white Portland cement manufactured by J.K. Cement or equivalent having minimum compressive Strength of 40 N/Sqm, Quartz, Fine Silica Sand, Alkali Resistant Glass Fiber manufactured by Nipon or Sant Gobain or Owens corning or equivalent, super plasticizers and polymers manufactured by BASF, Sika, MYK Schomburg or equivalent. The material casting should take place in Synthetic Rubber / FRP Mould manufactured by Reckli or equivalent. The Fixing of Jali should be Dry Fixing ie. to be done with GI Fasteners, dash fasteners, Self- screw and pins on MS Frame or wall/RCC as specified etc. complete. Item includes all materials, labor, necessary tools & plants, required scaffolding shuttering, transportation, all loading & unloading, all specified hardware for fixing the patterns, all applicable taxes, levies, duties, all leads & lifts, water, electricity, shop drawings, curing if any, cleaning etc. completei) GRC Cornice, Columns etc.B) Building
406	Providing and fixing of Glass Fiber Reinforced Concrete (GFRC) material in approved size, pattern, Design, thickness and color. The Jali / specified portion should be made from grade white Portland cement manufactured by J.K. Cement or equivalent having minimum compressive Strength of 40 N/Sqm, Quartz, Fine Silica Sand, Alkali Resistant Glass Fiber manufactured by Nipon or Sant Gobain or Owens corning or equivalent, super plasticizers and polymers manufactured by BASF, Sika, MYK Schomburg or equivalent. The material casting should take place in Synthetic Rubber / FRP Mould manufactured by Reckli or equivalent. The Fixing of Jali should be Dry Fixing ie. to be done with GI Fasteners, dash fasteners, Self- screw and pins on MS Frame or wall/RCC as specified etc. complete. Item includes all materials, labor, necessary tools & plants, required scaffolding shuttering, transportation, all loading & unloading, all specified hardware for fixing the patterns, all applicable taxes, levies, duties, all leads & lifts, water, electricity, shop drawings, curing if any, cleaning etc. completei) Decorative Carving Pattern in the Triangular portion as specifiedB) Building
407	Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.
408	Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.
409	Supplying and erecting HMS PVC conduit FRLS grade 32 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC
410	Supplying and laying HMS PVC conduit FRLS grade 32mm dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.
411	Supplying and erecting 25 mm dia. corrugated flexible polypropylene conduit
412	Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW
413	Supplying and erecting mains with 1x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW
414	Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW
415	Supplying and erecting mains with 1x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW
416	Supplying and erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places.as per specification No: WG-MA/BW
417	Supplying and erecting mains with 1x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places.as per specification No: WG-MA/BW (NOTE 3)
418	Supplying and erecting mains with 4x10 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places.as per specification No: WG-MA/BW
419	Supplying and erecting mains with 1x10 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places.as per specification No: WG-MA/BW (NOTE 3)
420	Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.
421	Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete.
422	Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete
423	Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.
424	Supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete
425	Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
426	Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
427	Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
428	Supplying and erecting white footlight with 4 modules concealed modular box and LED lights with cover complete erected on wall /flush to wall with necessary chiselling in wall and finishing with cement and mortar / POP as per required and duly connected.
429	Supplying and erecting 16 / 20 / 25 A starter (modular range) 2 module for AC unit on provided box complete & duly concealed with necessary material and connected.
430	Point wiring for light/bell concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/CW
431	Point wiring for ceiling fan concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/CW
432	Wiring for plug on board with Switch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification No: WG-PW/CW
433	Supplying and erecting LED square / circular Max. 18 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.
434	Supplying and erecting LED Panel Light(600mm X 600mm) Max. 35 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min 4200 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.
435	Supplying and erecting CRCA powder coated corridor / passage light LED fitting (4 feet) Max. 33W with high transitivity diffuser with system lumens output of Min. 4000 lumens , min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty.
436	Supplying & erecting inverter LED batten 20W tube light fitting with polycarbonate housing, heat sink, integrated HF electronic driver, Min. 2600 mAh Lithium ion Battery with charging time of 8-10 Hours and backup time of Min. 3 hrs. with minimum 25% of initial Watts having luminous efficacy of 100 lumen/watt, CRI>80, CCT of 6500K and THD<=20% having useful life of minimum 25000 hrs. with overheating protection with 2 years warranty.
437	Supplying and erecting anodized aluminium corridor / passage / mirror light LED fitting (2 feet) Max. 12W with high transitivity diffuser with min. system lumens output of 1200 lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver with end caps on provided PVC Block / wooden board with 3 years warranty.
438	Supplying LED concealed type foot / step light with aluminium body for indoor/outdoor application suitable for 4W-6W LED including driver and erecting by making necessary arrangement / recess in wall to make it flush with surface with 1 year warranty.
439	Supplying and erecting LED Strip light 5m Length Max. 45 W IP20 class having minimum lumens output of 800 Lumens/m, min. efficacy of 90 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD<10%, p.f. >0.95, operating range of 230-270V, Life class of 30,000 Hrs. at L70B50, including driver with 1 year warranty.
440	Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the R.C.C. bars upto 50 mm length each side and pierced through a 16 S.W.G. thick aluminium/M.S. Bowl 100 mm dia. or equivalent square size and having depth upto 75 mm complete erected with duly painted by one coat of red oxide paint and two coats of paint erected in position and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab.
441	Supplying and erecting ‘B’ class G.I .pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire.
442	Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, max. energy consumption of 28W having service ratio (CMM/W) of Min. 8 , PF>0.9, THD[without IR remote]
443	Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 225mm. 1400 RPM rust proof body & blades, wire mesh, duly erected, complete.
444	Supplying of 22W LED COB pro ceiling recessed light Colour natural White; strong focused beam angle 36 deg., titltable, durable aluminium housing, lumen output of 1980 lumens, 90 lumen/watt, lifetirne upto 35000 hrs, operating range 160-300V, dimension LxBxH- 120x110x80mm and cut out dia 110 mm with led driver included with 2 years warrenty.
445	Providing Supply and installation of single light antique finished wall light for illlumination of photoframe have 12W angled light with LED strip with refractive surface metal holder , wodden finish color & 3 core copper flexible wire for electrical conncetion complete.
446	Providing supply and installation l2No. lights hanging Zumber Supply & installation of 12 light chandelier made in brass expo antique finish with bell layer glass hang with brass ring to decorative 9\\" brass arm. Each arm placed at 1200 angle to each other these arms fix to central circular shape decorative brass mounting with brass hook provided for hanging to the ceiling each glass fitted with single pure brass heavy gauge B-22 type brass holder suitable for l2watt to 26 watt LED bulb & 3 core copper flexible wire for electrical connection complete without lamp complete in all respect
447	Providing, supply, lnstallation hanging decorative 3 Iight hanging fitting made up ofall pure briss having curve shape of clear glass Joint by pure brass frame. This fitting in banged with help of 2Mtr. Brass chain is covered by velvet cloth giving additional beaury to hanging fitting having 3 Nos. brass holder suitable for !5 Watt filament lamp fltting without Iamp complete in all respect
448	Supplying and erecting storage type water heater 25 litres capacity having standing loss <0.511kWh/24hour/45°C, high impact resistance engineering plastic body with anti corrosive high grade steel inner tank, heating element having hard water & corrosion protection, with minimum 3 safety protections (i.e. thermostat & thermal function cut-out, valve) with total pressure 8 bar withstanding capacity duly tested and marking sr. no. and date of erection complete. specification no. AP-WH/STWH
449	Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.3TR to 1.6TR capacity having ISEER minimum 3.8 to maximum 4.39 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. APAC/ WAC
450	Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.7TR to 2.0TR capacity having ISEER minimum 3.8 to maximum 4.39 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. APAC/ WAC
451	Supplying and erecting seamless outside & inside smooth dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia/size 16mm complete.
452	Supplying and erecting seamless outside & inside smooth dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia/size 22mm complete.
453	Supplying, erecting, testing and commissioning self contained water cooler 230/250V 50Hz nominal cooling capacity of 150 litres per hour and storage capacity 150 litres with partially stainless steel body as per specification no. AP-WCR/WC
454	Supplying, erecting, testing and commissioning of 10kVA capacity online pure sine wave, with backup time of ....... hrs. PWM & IGBT based UPS with 0.9 to unity output pf, 3 phase input & 3 phase output complete with all protections as per specification no. AP-UPS
455	Supplying and erecting 12V/42Ah SMF battery with battery terminal wire, duly charged with 24 months warranty complete
456	Carrying out core cutting of size 3\\" to 5\\" dia x 15\\" length in the C.C./rock/stone wall with the help of specialized core cutting machine in proper manner and finishing the site as original.
457	Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 16 mm for solar water heater/AC system.
458	Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 22 mm for solar water heater/AC system.
459	Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
460	Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
461	Supplying, erecting & marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
462	Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
463	Supplying & erecting triple pole and neutral distribution board (TPNDB),SPMCB of 8 ways / phase (24 poles), with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) asper specification no. SW-SWR/MCBDB
464	Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole/4 pole MCCB as incomer & outgoing SP MCB (24 poles) or TP MCB of 8 ways (24 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB1
465	Providing & erecting 4 Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB
466	Providing & erecting 4 Pole MCCB 415V, 400A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure /panel as per specification no. SW-SWR/MCCB
467	Supplying & erecting four pole ON LOAD change over switch, 415V, 400A, open execution having staggered termination, phase barrier, shroud termination and terminal cover along with auxiliary contacts and ready to upgrade with fuse protection kit, rotary handle, operational current category AC23A complying to IS/IEC 60947-3 Part-1/3.
468	Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame.
469	Supplying, erecting & commissioning 2 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB
470	Supplying, erecting & commissioning 2 pole RCCB 40A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB
471	Supplying, erecting & commissioning 4 pole RCCB 63A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB
472	Supplying and erecting terminal spreaders suitable for 4 pole, up to 100A MCCB (Set of 8)
473	Supplying and erecting terminal spreaders suitable for 4 pole, above 400A up to 630A MCCB (Set of 8)
474	Supplying and erecting extended rotary handle for MCCB with adjustable telescopic rod suitable for up to 250A MCCB.
475	Supplying and erecting extended rotary handle for MCCB with adjustable telescopic rod suitable for above 250A up to 630A MCCB.
476	Supplying & erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc.
477	Supplying & erecting LED type indicating pilot lamp with LED colour blue, 230 / 250 V on provided box / panel with necessary material, wiring & connections etc.
478	Supplying and erecting Intelligent flush mounted panel meter three phase four wire (IPM) input voltage measurement range 50-550 V AC (P-P) 415V, aux. supply 90-300 V AC/DC, flush mounted (96 x 96 mm) meter constant Wh viewing in LCD multifunction meters in auto scroll mode with voltage, current, frequency, power factor kW, kVA, kVAR, kWh, kVAh, kVARh, phase angle, interrupts, THD, complete with RS 485 communication protocol, class 1 accuracy and wiring connections and mounting hardware on provided panels complete with calibration certificate from manufacturer.
479	Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete.
480	Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.
481	Supplying and erecting of any size electrolyte aluminium patti or bar in bus bar chamber / in panel or any other purpose, 500 V with require capacity 99.9% aluminium purity with E91E Grade as per IS 5082 & Current Density 0.8 A per sq. mm. with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete as per specification no. BCP-BB
482	Supplying and erecting 50 kVAr, 440 V 3 phase, 50 Hz., Contactor Logic & Intelligent Relay micro APFC passive filter panel, consisting of suitable steps of APP/MPP type capacitor units with Detuned (harmonic filter) reactors of suitable rating , APFC panel shall be compliance to IEC 61439 and power quality IEC 61921 standard as per specification no CP-ED/APFC
483	Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 50 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
484	Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 300 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
485	Supply, Installation, Testing and commissioning of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete. Specification no. EA-MOBI
486	Supplying and erecting copper strip of high purity required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint with joints required. As per specification no. EAEP.
487	Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.
488	Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.
489	Supplying and erecting HMS PVC conduit FRLS grade 32 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.
490	Supplying and erecting modular type T.V. socket single outlet duly erected on provided plate and box with wiring connections complete.
491	Supplying and erecting modular type telephone socket one gang with safety shutter duly erected on provided plate and box with wiring connections complete.
492	Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
493	Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
494	Supplying and erecting 2 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation polyester taped Nylon Rip Cord & grey colour sheathed with FR PVC conforming to ITD specification S/WS 113C laid in provided PVC casing capping/conduit as per specification No. WG-TW
495	Supplying and erecting 10 pair 0.5 mm dia. jelly filled armoured telephone copper cable with poly-al laminate moisture barrier polythene sheathed G.S.Tape armoured polythene jacketed having laid in provided trench as per specification No. WG-TW
496	Supplying & erecting 20 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, Nylon Rip Cord & grey colour sheathed with FR PVC, conforming to ITD specification S/WS 113C laid in provided PVC casing capping/conduit as per specification No. WG-TW
497	Supplying & erecting co-axial copper cable low voltage grade tri-shielded RG-6 as per specification No. WG-TW
498	Supplying, Erecting and Commissioning of MDF Box 50x50 pairs made from min. 1.5mm thick MS sheet as per specification no. WG-TW
499	Supplying, erecting & commissioning 10 pairs FR junction box with moulded plastic enclosure as per specification no. WG-TW
500	Supplying and installing, testing & commissioning of digital (hybrid) type EPABX of 6 x 32 extensions suitable upto 96 extensions complete.FOR 64 extensions

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Maharashtra Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of Government Rest House Pratapgadh Building At Nashik Tal. Dist. Nashik (Civil And Electrical Works), Nashik-Maharashtra

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Of Government Rest House Pratapgadh Building At Nashik Tal. Dist. Nashik (Civil And Electrical Works), Nashik-Maharashtra

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us