Tender For Restoration Of Rain Damages Of Lwss Badron Tehsil Kandaghat Distt. Solan. (Sh:- Construction Of Head Weir). Job-1, Kandaghat-Himachal Pradesh
TDR : 55078023
Tender Notice
BOQ
7 Days Left
Kandaghat
Himachal Pradesh
Tender For Restoration Of Rain Damages Of Lwss Badron Tehsil Kandaghat Distt. Solan. (Sh:- Construction Of Head Weir). Job-1
Name of Work:- Restoration of rain damages of LWSS Badron Tehsil Kandaghat Distt. Solan. (SH:- Construction of Head Weir). Job-1
Sl. No.
Item Description
1
Excavation in foundation and trenches in all type of soil such as pickwork jumper work blasting soft & hard rock and through conglomeraterock upto all leads & lifts stacking the excavated soil not more than 3mtrs clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinths sides of foundations etc. consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated earth in all leads and lifts & as per directed of the Engineer in-charge.
2
Providing and laying cement concrete 1:3:6 (1cement:3approved sand:6app.graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth including entire carriage of material upto all leads and lifts.
3
Providing and laying cement concrete 1:1.5:3 (1cement:1.5approved sand:3approved graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:-
4
Foundation and plinth including entire carriage of material upto all leads and lifts.
5
Wall (any thickness but not less than 0.1m thickness) attached pillasters, buttresses plinth and string courses etc. from top to foundation level upto floor two level and as per the direction of Engineer-in-charge.including entire carriage of material upto all leads and lifts.
6
Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish. Including centring, shuttering strutting and propping etc. with wooden battens and ballies height of propping and centring below supporting floor to ceiling not exceeding 4mtrs and removal of the same for insitu reinforced concrete and plain concrete work in:-
7
Vertical surface such as wall of (any thickness) partition and the like including attached pillaster buttresses plinth and string courses and like and as per the direction of Engineer-in-charge including entire carriage of material upto all leads and lifts.
8
Providing tor steel reinforcement for RCC work including bending, winding and placing in position complete upto floor two level as per the direction of Engineer-in-chief including entire carriage of material upto all leads and lifts.
9
Wire crates of G.I. wire filled with boulders with square cut faces against the wire (wire crates to be measured and paid for separately) including entire carriage of material upto all leads and lifts as per direction of Engineer-in-charge.
10
Wire crates made of G.I. Wire filled with boulders with square cut faces against the wire (boulder filling to be measured and paid for separately) G.I. Wire 5mm thick corresponding to SWG-6 15cmx15cm mesh as per direction of Engineer-in-charge including entire carriage of material upto all leads and lifts. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
