|
| 1 | Surface dressing n.exc 15cm deep and getting out hard/dense soil . |
| 2 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and n exc1.5 m in depth and getting out in hard dense soil complete all as specified & directed. |
| 3 | M&L PCC type D-2 1 :4 : 8 (40mm graded agg) in foundation, filling and mass concrete incl sub base of Bldg. |
| 4 | M&L for M-30 grade cement concrete using 20mm graded stone aggregates as in Foundations, including rafts,footings, foundation beams, plinth beams; bases for columns, etc. basement slabs,under-reamed piles and mass concrete complete all as specified & directed. |
| 5 | M&L for M-30 grade cement concrete using 20mm graded stone aggregates as in Columns, pillars, piers, posts and struts complete all as specified & directed. |
| 6 | M&L for M-30 grade cement concrete using 20mm graded stone aggregates as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified & directed. |
| 7 | M&L for flat rough finished form work to side of concrete foundations, footings, bases of coloumns, raft and raft beam, sides and soffits (if any) of foundation and plinth beams, and similar works.etc. |
| 8 | M&L for flat rough finished form work to side of pillars, posts, struts, piers, columns and stanchions.etc |
| 9 | M&L for flat rough finished form work to sides and soffits of floor or roof beams, beam haunchings girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc |
| 10 | S&F mild steel TMT bars 10mm dia and over cut to length bent to shape required incl cranking bending spirally for hooping etc and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips. |
| 11 | All as per item No 10 above but 5mm dia and over upto and incl 10mm dia in strirups, spacers and binder etc. |
| 12 | M&L for Precast cement concrete Type C1, (1:3:6) (using 20mm graded crushed stone agg) block masonary with solid blocks exc 10cm in width and setting in CM 1:4, complete all as specified and directed by Engr-in charge. |
| 13 | M&L 15 mm thick cement plaster on other than fair faces of concrete surface in cement mortar (1:4) finished even and somooth without using extra cement. |
| 14 | M&L 15 mm thick cement plaster on fair faces of concrete surface in cement mortar (1:6) finished even and somooth without using extra cement. |
| 15 | S & F second class soft wood fillets square or rectangular in section sectional area exceeding 13 sq cm and n exc 25 sq cm as in scantling secured with nails or brads complete all as specified and directed. |
| 16 | S&F 12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with nails to timber frame work as in wall/ceiling complete, all as specified and directed by Engr-in-Charge. |
| 17 | S&F 9mm thick prelaminated particle board, interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work all as specified and directed. |
| 18 | M&L for 2nd class softwood moulding as in cornices, picture rails and the like n.exc 6 Sqcm complete all as specified and directed. |
| 19 | M&L for Plain fillets of second class soft wood, sectional area n. exceeding 3 Sqcm square, rectangular or traingular in section, bullnosed, splayed, chamfered or rounded on one edge or face complete all as specified and directed. |
| 20 | M&L for preparation of new plastered surfaces of walls and applying three coats of white wash. |
| 21 | M&L for two coats of oil bound distemper on newly plastered surfaces of walls over a coat of primer including preparation of surfaces. |
| 22 | M&L for preparation of new plastered surfaces on walls and applying two coats of cement based paint over a coat of primer. |
| 23 | Returning, filling of hard / dense soil incl spreading, levlling, watering and well ramming in each layer including filling in floors upto plinth n.exc 25 cm thick all as specified and directed. |
| 24 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point. |
| 25 | M&L 75mm thick cement concrete (1:3:6) type C2 as in sub base to floor/plinth protection as specified. |
| 26 | M&L 25 mm thick cement concrete 1:2:4 type B-0 as in floor finished even and rough to receive further floor finishes. |
| 27 | M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over 20mm thick screed bed or bedding layer in cement mortar 1:6 all as specified and directed. |
| 28 | M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete incl 15mm thick rendering in CM 1:4 complete all as specified and directed |
| 29 | S&F Non skid coloured joint free ceramic tiles 7 to 8 mm thick (square/rectangular) each tiles exc 0.06 Sqm but not exc 0.11 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over 15mm thick screed bed or bedding layer of mortar in CM 1:6 complete all as directed |
| 30 | S&F glazed ceramic coloured tiles in vertical surface of size 300x450x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over 15mm thick rendering in cement mortar 1:4 all as specifed and as directed. |
| 31 | S&F Rolled mild steel Gde Fe-290 (Gde Fe 165) as in Roof trusses (framed), trussed, purlins crane gantries, rails & fastenings & heavy brackets framimg (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc. |
| 32 | S&F Rolled mild steel Gde Fe-290(Gde Fe 165) in Plates (plain or chequered) channels, angle sections, square cut or notched (ordinary & counter sunk) forming holes, with riveted, bolted or welded attachment. |
| 33 | S&F Mild steel rag or lewis bolts screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised length all as per directed. |
| 34 | M&L for preparation of new untreated steel / iron surfaces of any description over 10cm in width or girth not otherwise described and painting two coat of synthetic enamel paint over a coat of red oxide zinc chrome complete all as specified. |
| 35 | S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified |
| 36 | S&F for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 37 | S&F plain solid straight chowkats and framed wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints in 2nd class soft wood KAIL) complete all as specified. |
| 38 | S&F 30 mm thick 2nd class soft wood (KAIL) plain framed panelled shutter (any number of panels) with panels of timber flat on both sides (Feather edge) or of veneered particle board medium density wood particle board with commercial face veneers and fitted to chowkhat complete all as specified and directed. |
| 39 | S&F 30 mm thick 2nd class soft wood (KAIL) glazed and skeleton shutter open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or rounded, mitred and rebated sash bars any numbers complete all as specified and directed. |
| 40 | S & F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks, or galvanised wire staples including etc complete all as specified. |
| 41 | S & F solid PVC door frame of size 50 mm x 47 mm made out of 5mm thick PVC sheet reinforced with mild steel square tube complete all as directed. |
| 42 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing complete all as per specification and directed. |
| 43 | M&L for preparation of new wooden surfaces of any dscription over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. |
| 44 | S&F 100mm but hinges medium weight cold rolled mild steel fixed with screws or welded all as directed. |
| 45 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 300mm long. |
| 46 | S&F 150mm long alluminium anodized, barrel tower bolts extruded section & fixed all as specified. |
| 47 | S& F aluminium handles cast type anodised size150mm complete all as specified. |
| 48 | S&F 75 mm butt higes medium weight cold rolled mild steel fixed with screws or welded all as directed. |
| 49 | S& F 100mm long aluminium anodized, barrel tower bots extruded section & fixed all as specified. |
| 50 | S& F aluminium handles cast type anodised size100mm complete all as specified. |
| 51 | S&F sheet glass 3mm thickness pin headed type and glazing with oil putty n exc 0.5 Sqm in each pane. |
| 52 | S & F Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. |
| 53 | S&F rotational moulded polythylene water storage tank 1000 Ltrs capacity (cyliderical / vertical with closed top) hoisted and fixed in postion all as specified. |
| 54 | S&F Vitreous china wash down water closet pan orissa pattern size 580x440mm (Pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) all as specified. |
| 55 | Supply & fixing Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe). |
| 56 | S&F vitreous china urinal partition white of size 310x700mm complete all as specifed and as directed. |
| 57 | S&F CP urinal spreader complete all as specified |
| 58 | S & F 10 Ltrs capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve throat flush type and handle incl brackets complete all as specified. |
| 59 | S &F 600 x 450 mm bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial ply wood and fixed completed wot wall with wood plug and CP plated brass screws and cup washers. |
| 60 | S & F Vitreous china wash basin, white, angle back with pedestal, size 600x480mm excluding taps, waste chain and plug and porcealin stopper but incl brackets |
| 61 | S&F Gun metal globe or gate valve with iron wheel head secrewd bolt ends for iron pipe and fixed of 20mm bore dia all as specifed. |
| 62 | S & F Towel rail 600 mm long PTMT fixed with and incl chromium plated brass screws and wooden/ plastic cleats |
| 63 | S&F 20mm outer diameter 3-layer PP-R (polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed. |
| 64 | S&F 25mm outer diameter 3-layer PP-R (polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed. |
| 65 | S&F bib tap 15 mm bore chromium plated copper alloy with crutch or butterfly handle screwed donw screwed for iorn pipe or brass ferrule. |
| 66 | S&F Stop valves/Angle Cock cast copper alloy, screw down high pressure with crutch or butterfly handly for 15mm bore pipe. |
| 67 | S&F pillar tap 15mm bore chromium plated screwed down, thigh pressure with or without lettered (hot or cold) with long screwed shankes and fly nuts screwed for inner pipe. |
| 68 | S & F PVC connection 15mm size with PTMT nuts or length 450mm. |
| 69 | S&F for waste coupling of PTMT (half or full threaded) 32mm dia for basin/ urinal incl waste pipe. |
| 70 | S & F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 71 | S & F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 72 | S & F 110 mm bore PVC (SWR) bends with oval access door any radius complete all as specified and directed. |
| 73 | S & F 75 mm bore PVC (SWR) bends with oval access door any radius complete all as specified and directed. |
| 74 | S & F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 75 | S & F 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 76 | S&F 75mm bore PVC (SWR) reducers complete all as specified and directed. |
| 77 | S&F 75 mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 78 | S&F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 79 | M & L for 100 mm thick plain cement concrete 1:3:6. type C-2 (using 40mm graded aggregate) as in plinth protection complete all as specified and directed. |
| 80 | M & L for machine pressed precast concrete interlocking paver block of size 100x100x55-60 mm of texture of cobble stone pattern conforming to IS 15658-2006, M-35 Grade with grey cement and pigment over 25 mm thick sand cushion complete all as specified and directed. (Note sand cushion measured and paid separately) |
| 81 | M&L for Sand filling under floors or in foundation including watering and consolidation all as specified and as directed. |
| 82 | M&L for providing cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregates ) as in coping complete all as specfied and directed. |
| 83 | Excavating over areas, n exc 1.5 m deep and getting out and getting out in hard dense soil complete all as specified & directed. |
| 84 | All as per item no 83 above but depth exc 1.50m but not exc 3.0m complete all as specified & directed. |
| 85 | M&L for hard core of broken bricks for loose filling using 63mm to 100 mm of size |
| 86 | M&L for stone masonry walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, bulit in cement mortar 1:4, complete all as specified & directed. |
| 87 | M&L for stone masonry walling of random rubble,uncoursed, well bonded, laid dry in retaining walls, abutments and similar work complete all as specified & directed. |
| 88 | M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick |
| 89 | M&L for formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work complete all as specified. |
| 90 | M&L for precast cement concrete type B-1 (1:2:4) using 20mm graded stone aggregates as in lintels, landings, coverslabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:4 complete all as specified. |
| 91 | M&L for RCC (1:1.5:3) using 20mm graded stone aggregate in slabs supported on walls, beams, complete all as specified. |
| 92 | M&L for 150mm bore (DOUBLE WALL CORRUGATED) Pipes (150mm SN8),including fitting laid and jointed complete with collors all as directed and specified by Engr-in-Charge. |
| 93 | M&L Concrete bed to drain pipe in PCC (1:4:8) Type-D-2, using 40 mm graded stone aggregate including packing under and haunching against the sides of pipes after they are laid and tested, for 150 mm bore of pipe (Earth work shall be measured and paid separately) |
| 94 | M&L for Precast cement concrete type C-1 block masonary with solid blocks 1:3:6 (using 20mm graded crushed stone aggregate) exc. 10cm in width and setting in cement mortar (1:6), complete all as specified and directed by Engr-in-Charge. |
| 95 | M&L for rendering 15mm thick in cement mortar in 1:4 in two layers with backing coat 10 mm thick and second coat 5 mm thick with WPC on fare face of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. Note:- WPC shall be measured and paid separately under respective item of this schedule. |
| 96 | Supply only integral water proofing compound complete all as specified and directed by Engr-in-Charge. |
| 97 | M&L for Point wiring for light/fan/bell with FRLS cable of 1.5sqmm PVC insulated (red/blue/yellow for phase, black for neutral and green for earth) unsheathed multistranded copper conductor 1100 volts grade in and including not less than 2mm thick PVC casing caping with all accessories and 1.5sqmm green in colour PVC insulated multistranded copper conductor FRLS cable for earth continuity connected to common earth dolly incl MS/GI sunken box with 3mm thick pre laminated hylum sheet/PVC box with back plate, flush/surface type for mounting fittings such as switches,socket,and regulator complete all as specified and directed for one light point or bell/buzzer point controlled by one switch. |
| 98 | All as per Srl item No 97 here in before but using cable size 2.5 Sqmm for one 3 pin socket outlet 5 Amps on independent board. |
| 99 | All as per Srl item No 97 here in before but using cable size 2.5 Sqmm for one 3 pin socket outlet 15 Amps on independent board. |
| 100 | S & F Switch piano flush type 5 Amps, single pole one way. |
| 101 | S & F Switch socket combination 2 in 1, and 3 and 2 pin, 5 Amps flush type. |
| 102 | S & F Switch socket combination 2 in 1, 5 and 15 Amps flush type. |
| 103 | M & L of ceiling rose on PVC square blocks surface bakelite 3 terminal complete all as specified and directed. |
| 104 | Supply and fixing LED lights fitting, surface mounting general purpose ultra slim economical LED batten of 1x 18W/20W, lumen out put 100lm/wattt, CCT:6500K/3000K , PF>0.9, in extruded PC housing and round/square shaped diffuser including connecting up with two core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 105 | S & F of Sheet metal enclosure for DB's Double door, single pole and neutral, 240V, 8 way with 200 Amp rated bus bar including blanking plates where required. Complete all as specified and directed. |
| 106 | Supply and fixing of 240 V 10 KA C curve miniature circuit breaker (MCB) SPN 32 Amp in the MCB DB complete with connection testing Complete all as specified and directed. |
| 107 | Supply and fixing of 240 V 10 KA C curve miniature circuit breaker (MCB) SP 5 to 32 Amp in the MCB DB complete with connection testing Complete all as specified and directed. |
| 108 | M & L for Earthing complete with galvanised steel earth plate electrode 60cm×60cm×6.0mm thick, buried directly in ground vertically (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers made out of galvanised iron or steel and connected to main switch board or equipment, including watering arrangement with GI medium grade 20mm bore watering pipe with funnel and wire mesh with PCC chamber CI cover with frame including 15mm dia GI pipe light grade for protection of earthing lead etc including necessary excavation in any type of strata, returning, filling, removal of soil outside MD land, filling of charcoal and salt complete all as shown in electrical plate No. 3 of MES Sch Part I, connected to earthing test point all as specified or indicated including testing on completion.Notes : (i) Earth continuity conductor including protection pipe upto 7.5 meters from earth electrode will be include in unit rate,(ii) Arrangement for earth resistance test should be carried out by the contractor. No extra payment shall be provided for the same. |
| 109 | Supply and fixing LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp. |
| 110 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250 mm including making arrangement for fixing Complete all as specified and directed. |
| 111 | Supply & laying or fixing and testing cross linked polytehylene (XLPE) LT cable XLPE insulated, PVC inner sheathed, bedded, galvanised steel strip or wire armoured heavy duty 1100 V grade with stranded aluminium conductor having cross sectional area 16 Sqmm 4 core and conforming to IS-7098(Part-I-1988 & as per latest amendments), laid in trench/ducts/through pipes/in floors/under roads/under hard standing/along poles complete all as specified & directed. |
| 112 | Supply & laying or fixing and testing cross linked polytehylene (XLPE) LT cable XLPE insulated, PVC inner sheathed, bedded, galvanised steel strip or wire armoured heavy duty 1100 V grade with stranded aluminium conductor having cross sectional area 16 Sqmm 2 core and conforming to IS-7098(Part-I-1988 & as per latest amendments), laid in trench/ducts/through pipes/in floors/under roads/under hard standing/along poles complete all as specified & directed. |
| 113 | Supply and Fix GI tubing light grade 40 mm bore as in cable protection fixed to poles/walls or laid intrenches/under road crossing etc. all as specified and as directed. |
| 114 | Supply and Fix GI tubing light grade 50 mm bore as in cable protection fixed to poles/walls or laid intrenches/under road crossing etc. all as specified and as directed. |
| 115 | Sand cushioning with fine sand to under ground cables in trenches/ducts in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable as specified in clause 19.75 of SSR Part-I. |
| 116 | Factory made ISI marked un-reinforced precast cement concrete cable cover class LV, flat of size 250mmx150mmx40mm, laid dry over electric cable for protection all as specified. |
| 117 | Supply & laying or fixing and testing of DWC (Double Wall Corrugated) duct pipe (HDPE) of size 63 x 50 mm laid in trench/ducts/under roads/under hard standing/along poles complete all as specified & directed. |
| 118 | M&L for Demolition of PCC / Black top road of any specification for laying of cable/pipe and filling of PCC 1:4:8 type D2 upto 400mm depth and 300 mm width and PCC 1:1.5:3 Type B1 upto 200 mm depth and 300 mm width and including removal of excavated material from site complete all as directed. Please Enable Macros to View BoQ information |
