|
| 1 | M & L for preparation of existing surface of walls by brush, sand paper, surface repair required of old plastered or un-plastered surface of wall/ceiling all as specified and as directed by the Engineer-in-Charge |
| 2 | M&L for preparation of old plastered or un-plastered surface of walls and applying one coat of white wash (lime) complete all as specified and directed . |
| 3 | Taking down chowkhats or frames of any description n exc 1.5 sqm each (without taking off shutters from the frame) and as directed |
| 4 | Taking down chowkhats or frames of any description exc 1.5sqm and n exc 4sqm each (without taking off shutters from the frame) and as directed |
| 5 | Taking down wooden shutters of any description of size n.exc 1 Sqm each and as directed . |
| 6 | Taking down wooden shutters of any description of size but exc 1 sqm n exc 2 Sqm each and as directed . |
| 7 | M&L for preparing old painted steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 8 | Taking up or down existing steel tubing 15 mm bore and and including connections etc complete and as directed |
| 9 | Taking up or down existing steel tubing 20 mm bore and and including connections etc complete and as directed |
| 10 | Supplying and laying of CPVC pipes 16 mm bore SDR 11 & Plain CPVC SDR 11 fittings with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor etc complete all as specified and directed. |
| 11 | Supplying and laying of CPVC pipes 20 mm bore SDR 11 & Plain CPVC SDR 11 fittings with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor etc complete all as specified and directed. |
| 12 | M & L for a coat putty on old/new plastered or un-plastered surface of wall/ceiling all as specified and as directed by the Engineer-in-Charge |
| 13 | M & L for applying two coat of oil bound distemper all as specified and as directed by the Engineer-in-Charge |
| 14 | M&L preparation of old distempered surface of wall, pillasters , cornices etc by washing rubbing down & stopping etc and applying one coat of oil emulsion distemper complete all as specified and as dirceted |
| 15 | M&L for preparation of old plastered surfaces and applying a coat of cement based paint on walls, facia , cornice, chajja upto 16 meter height of the bldg, complete all as specified and directed. |
| 16 | M&L for preparation of existing surface and applying two coats of cement based paint paint on walls, facia , cornice, chajja upto 16 meter height of the bldg, complete all as specified and directed. |
| 17 | M&L for preparation of old painted wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed |
| 18 | M&L for complete removal of existing treatment and preparation of surfaces of walis by scrapping/sand preparing / rubbing and finally washing with watering and applying a coats of exterior emulsion lacyrlic weather proof antifungal paint over a coat of exterior grade arimer upto 16 meter height of the bldg, complete all as specified and directed. |
| 19 | M&L for preparation of existing surface and applying a coats of terracotta paint on walls, facia , cornice, chajja upto 16 meter height of the bldg, complete all as specified and directed. |
| 20 | S&F in repair factory made single extruded WPC (Wood Polymer Composite) chowkhat for solid door & other Frames of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant etc.complete as per direction of Engineer-in-Charge |
| 21 | S&F in repair factory made single extruded WPC (Wood Polymer Composite) chowkhat for solid door & other Frames of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant etc.complete as per direction of Engineer-in-Charge |
| 22 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: Cost of stainless steel butt hinges and necessary S.S screws will be included in qouted rate. ) |
| 23 | S&F 30 mm thick FACTORY MADE WIRE MESH SOLID WPC both side solid decorative DOOR SHUTTER consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company,including SS mosquito Mesh and XTN aluminium Mesh with aluminum deco grill for additional strength and safety purpose. (confirming as per S:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube. Other hardwares should be fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in-charge, manufacturer's specification & drawings. complete all as specified and directed. (Note: Cost of stainless steel butt hinges and necessary S.S screws will be included in qouted rate. ) |
| 24 | S & F in repair factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.Area not exceeding 2.00 sqm each (Note: The unit rate quoted by contractor included cost of glass and includes all other connected accessories.) etc complete all as specified and direcetd. |
| 25 | S&F, 30mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed by the Engineer-in-Charge |
| 26 | S&F, locally made 30 mm thick IInd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter as specified in SSR Pt I sec 8 Cl 8.24 (a), divided into squares with plain chamfered rounded, mitered and rebated sash bars etc complete all as specified and as directed. |
| 27 | S&F locally fabricated plain framed panelled shutter 30 mm thick IInd class HW (any number & Panels) with lock rail and panel of 9 mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both face, the size of rail and style as per IS : 1003 (Part I) kiln seasoned and chemically pressure treated etc complete all as specified and as directed |
| 28 | S&F solid PVC frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, S&F in opening as per specification, drawing and colour etc complete all as specified and as directed . |
| 29 | S&F factory made solid panel PVC door shutter 30mm thick (style) constiting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and palin colour PVC sheet for top rail lock rail & botom rail on either side and as gap insert for top rail bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/selaed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement S&F in the frame at site as per specification & drawing etc complete all as specified and as directed. |
| 30 | S&F in repair 3 mm thick figured glass ,pin headed and glazing with wooden beads in square n. exc 0.5 Sqm in each pane or glazing with oil glass putty including hacking out old broken glass from wooden or steel frame surround complete all as specified and as directed etc complete all as specified and as directed. |
| 31 | S&F aluminium wire clothes 0.56 mm nominal dia of wire and average width of aperture1.00 mm complete fixed with tinned tacks or galvanised wire staples all as specified and as directed. |
| 32 | S & F in repair aluminium wire clothes 0.56 mm nominal dia of wire and average width of aperture1.00 mm complete fixed with tinned tacks or galvanised wire staples all as specified and as directed. |
| 33 | M&L for Cutting holes into or through brick walls built in cement mortar , superficial area n exc 150 Sqcm each and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required |
| 34 | S&F mild steel framed work such as grills, gratings, etc with ends of bars shouldered and or riveted or forged into spikes, framed, barred iron door, ladders, fencing work ect. conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 35 | M & L for preparation of new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed |
| 36 | S&F 100 mm butt hinges,extruded aluminium alloy with galvanised mild steel hinge pin, anodised type C-1 and fixed etc complete and as directed. Make for builders hardware fittings |
| 37 | S&F 100 mm butt hinges ,medium weight ,cold rolled mild steel and fixed etc complete and as directed. |
| 38 | S&F aluminium anodised barrel tower bolt of extruded section and fixed 150 mm long etc complete all as specified and directed. |
| 39 | S &F 150 mm size Aluminium handles, cast type, anodised and fixed etc complete all as specified and directed. |
| 40 | S &F 250 mm long aluminium alloy anodised sliding door bolts with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and as directed |
| 41 | S&F in replacement door closure , haudraulic regulated ,aluminium body ( extruded section body ) designation no.2, universal type ( ISI Marked ) suitable for door shutter of size between 701 to 850 mm in width , weight 36 to 60 kg and fixed complete all as specified and directed. Make : Sandhu/Zip |
| 42 | S&F, in repair 225mm, ordinary rat tail rod patttern springs includding roller and roller plate etc complete all as specified and as directed |
| 43 | S&F in repair aluminum adjustable automatic spring door closer (silver colour) with allen key and screws weight minium 200 gm etc complete and as directed. |
| 44 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises and complete all as specified and as directed. |
| 45 | M&L, for PCC 1:2:4 type B-0 using 12.5 mm gradesd stone agg as in levelling course of floors of 25 mm thick complete all as specified and directed. |
| 46 | M&L, screed bed or bedding layer of mortar 15 mm thick in cement mortar 1: 6 to receive tiles etc finished rough complete all as specified and directed. |
| 47 | M&L for Vitrified ceramic tiles 7-8mm thick (square/rectangular) polished area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor etc complete all as specified and directed. |
| 48 | M&L for vitrified ceramic tiles 7-8 mm thick (square / rectangular) polished area of each tile exceeding 0.18 sqm but not exc 0.36 sqm, in Vertical surfaces such as skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor etc etccomplete all as specified and as directed |
| 49 | M&L for High glossy light/dark shed Glazed ceramic tiles 8-9 mm thick (square/ rectangular), area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm,polished, in floors etc.jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 50 | M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.18sqm but not exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor etc complete all as specified and as directed. |
| 51 | M&L for non skid coloured ceramic tiles 7 to 8 mm thick , size 400mm x 400mm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor etc complete all as specified and as directed. |
| 52 | Material & Labour glazed ceramic coloured tiles 1200x600x7-8 mm thick on skiriting/dado, set & jointed in neat cement slurry & pointed with white/coloured to match over 10mm thick bedding layer of mortar to wall in cm (1:4) for laying tiles on skirting/dadocomplete all as specified and as directed. |
| 53 | M&L for glazed coloured tiles 450x300x7mm thick for work on vertical surface, set & jointed in cement slurry and pointed in white or coloured cement to match match over 10mm thick bedding layer of mortar to wall in cm (1:4) for laying tiles etc complete all as specified and as directed |
| 54 | M&L for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick in CM(1:6) etc complete all as specified and directed. |
| 55 | M&L 10mm thick mettle finish heavy duty endura tiles, area of each tile not exceeding 0.18 sqm set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor etc including 15 mm screed bed with CM(1:6) complete all as specified and directed. |
| 56 | S&F rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I 500 ltrs capacity including dismantling existing complete all as specified and as directed. |
| 57 | S&F 1000 ltr capacity rotational moulded polythene tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling existing complete all as specified and as directed. |
| 58 | S & F 20 mm ball valve high pressure of PTMT valves with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified. |
| 59 | S & F in repair 20 mm ball valve high pressure of brass valves with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified. |
| 60 | S&F in repairs 20 mm ball valve high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified. |
| 61 | S & F in repair 20 mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. |
| 62 | S&F in repair fency type Bib taps, cast copper alloy, cromium plated with crtuch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed 15mm bore complete all as specified and directed. |
| 63 | S&F in repair 15mm bore fancy type chromium plated bib cock long body with flange etc complete all as specified and as directed. |
| 64 | S&F in repair angle cock fancy type CP cast copper alloy screwed down high pressure with crutch or buttor fly handle screwed both ends for iron pipe or for unions and fixed 15mm bore complete all as specified and directed. |
| 65 | S&F in repair concealed stop cock fancy type CP cast copper alloy screwed down high pressure with crutch or buttor fly handle screwed both ends for iron pipe or for unions and fixed 15mm bore complete all as specified and directed. |
| 66 | Suppy and fixing for 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed |
| 67 | Supply and fixing corner glass shelf with CP bracket fixed with screws complete all as specified and as directed by Engineer-in-Charge. |
| 68 | S&F CP Brass soap dish fixed to wall with cp brass screws etc complete all as specified and as directed by the Engineer-in-Charge. |
| 69 | S&F in repair brass chromium plated health faucet for EWC screwed down to GI tubing/fittings 15mm dia incl 1200mm long stainless steel connection complete all as specified and directed. |
| 70 | S & F CP Towel rail 20 mm dia and 60 cm long complete all as specified and directed |
| 71 | S&F in repair 10 Ltrs capacity PVC flushing cistern valveles syphonic action type low level, white, with inlet ball valve, float & handle incl brackets & flush pipe complete all as specified and directed. |
| 72 | S&F in repair vitreous china squatting pan “ORISSA” pattern size 58X 44 (CM) star whitewith P or S trap front or back inlet with integral foot rest (excl flushing cistern & flush pipe) & including connection to trap & to flushing pipe anti syphonage pipe etc complete including making good to floor complete all as specified & as directed. |
| 73 | S&F in repair EWC (Pedestal Pattern) cascade type (in One piece) with glazed flush tank, seat cover etc white including fixing bolts complete including making good to floor to match with adjoining surfaces and taking out existing water closet all as directed by Engineer-in-Charge. |
| 74 | S &F in repair EWC (Pedestal pattern) including P or S trap and connection to drain or out going pipe and to flusing pipe and including making good to floor to match with adjoining surfaces all as directed and including Taking out existing water closet etc complete . Make : Hindware/ Cera /Parryware |
| 75 | S &F in repair plastic seat cover heavy duty closed pattern with flat bottom and cover and mild steel CP hinging device etc complete . |
| 76 | S&F in repair cast copper alloy CP Jet spray with 1 mtr flexible tube for EWC screwed down fixed to GI tubing/fittings 15mm dia etc Make : Cera/Jaquar/ Hindware/Prayag |
| 77 | S&F in repair cast copper alloy CP toilet paper holder fixed to wall etc complete . |
| 78 | Supply and fix in repair vitreous china wash basin white flat back size 630x450mm including cutting for and pinning in ends of brackets or erecting stand,waste coupling,32 mm bore PVC waste pipe of suitable length, and connection complete all as directed complete all as specified and as directed. |
| 79 | S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 80 | S&F in repair stainless steel grating ( Square/circular ) of size 100 mm with hole etc complete and as directed. |
| 81 | S&F brass CP mixer 15mm dia bore mixing hot & cold water for wall screwed down for iron pipe and fixed all as directed. |
| 82 | S&F in replacement central hole WHB mixer ( Mixing of Hot & Cold water ) cast copper alloy CP Fancy type with without pop up waste system and fixed complete and as directed. |
| 83 | S&F in repair 15 mm bore Pillar tap , long neck , Fancy type , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, fly-nuts, screwed for iron pipe and fixed etc complete |
| 84 | Supply only PVC waste pipe with 32 mm bore and 65 cm long with cap complete all as specified and directed. |
| 85 | S&F in repair premium stainless steel sink double board made of 0.90/1.00 mm thick steel sheet ( size 915x460mmx160mm), solid pattern for kitchen or laboratory with necessary plug, waste pipe, coupling, washers and vegetable strainer basket incl connecting union etc, complete. |
| 86 | S&F in repair stainless steel sink with drainage board made of 1.00 mm thick steel sheet for kitchen or laboratory with plug, waste pipe, coupling, washers also incl cantilever cast iron brackets connecting union etc, overall size 915x460mm with bowl size 410x330x160mm complete. |
| 87 | Supply and Fixing in Repair Waste coupling of of stainless steel any size for WHB / Sink (half or full threaded) complete all as specified and directed. |
| 88 | S&F in repair stainless steel plate reck made of 1.00 mm thick sheet for kitchen overall size 900mm x 750mm etc complete all as specified and directed. |
| 89 | S &F in replacement glass shelf assembly consisting of 5.5mm thick sheet glass 12 cm wide with CP bracket guard and railing 60cm long fixed to wall with screws in position complete all as directed . |
| 90 | S&F in repair swivel shower rose cast copper alloy , CP and fixed with 15mm pipe with shower arm 15mm size, 195mm long with bend of 45 degree with wall flange etc complete and as directed . Make Parryware /ESS-ESS/Jaquar/Hindware |
| 91 | S&F in repair Fancy type , Stainless Steel curtain rod of any size with end knob ( 2 nos per length ) Fancy type and end brackets ( 2 nos per length ) and fixed on wall etc complete and as directed |
| 92 | Demolition of cement concrete (unreinfored )in ground floor and paving n,exc 15cm thickness below or above ground level)complete all as specified and as directed. |
| 93 | M&L for PCC 1:4:8 type D2 using 40mm graded stone agg as in filling and mass concrete, Sub base/flooring complete all as specified and directed. |
| 94 | M&L for 50 mm thick cement concrete type B2, 1:2:4 (40mm graded aggregate) as in floor/hardstanding finished even and smooth with using extra cement complete all as specified |
| 95 | M&L 60 mm thick machine pressed precast coloured glossy finished concrete interlocking paver block any shape & size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement & pigment including sand cushning and necessary coping complete all as specified and directed. |
| 96 | M&L for 75mm thick cement concrete type C-1, 1:3:6 (20mm graded aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified |
| 97 | S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 75mm inetrnal bore etc complete including taking out old unserviceable pipe all as specified and direcetd . |
| 98 | S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls , 110 mm inetrnal bore , etc complete including taking out old unserviceable pipe all as specified and direcetd . Make : Prince/Supreme/Finolex/Reliance Industries |
| 99 | S&F PVC (SWR) bends any radius 110 mm bore etc complete all as specified and directed. |
| 100 | S&F PVC (SWR) bends any radius 75 mm bore etccomplete all as specified and directed. |
| 101 | S&F PVC (SWR) junction single (Single \\" T \\") equal or un equal ,75 mm bore etc complete all as specified and directed. |
| 102 | S&F PVC (SWR) junction single (Single \\" T \\") equal or un equal ,110 mm bore etc complete all as specified and directed. |
| 103 | S&F in repair PVC (SWR) vent Cowl 110 mm bore etc complete all as specified and directed. |
| 104 | S&F in repair PVC (SWR) floor trap, 75 mm dia outlet with grating including jointing with solvent cement and jointing to waste pipe embedded in PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregtaes etc complete and as direcetd. |
| 105 | M&L PVC (SWR) Gully trap, 125/110 mm dia setting and jointing with solvent cement etc complete and as direcetd. |
| 106 | Demolition of brick work/ stone boulder built in cement mortar or cement lime mortar and as directed. |
| 107 | M & L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cm (1:6), rise of hight for brick wall complete all as specified and as directed. |
| 108 | M& L, Brickwork, with subclass ‘B’ bricks in half brick thick honey comb work, built in CM 1:4. |
| 109 | M& L for 10 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces , surface finished smooth and even without using extra cement etc complete all as specified and as directed. |
| 110 | S & F Powder coated /Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 111 | S & F Powder coated /Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
