|
| 1 | Providing, fixing, testing and commissioning of MS air cushion tank on top of each riser fabricated form 6mm thick MS plate, 250mm in diameter and 1.2 m in height with dished ends fabricated from 8mm thick MS plate with Air release valve with stop cock, flanged inlet connection and drain arrangement with 25mm dia valve, pressure gauge with gun metal stop cock complete with all accessories as required in all respect and to the best satisfaction of Engineer-in-Charge. |
| 2 | Providing, fixing, testing and commissioning of Perched air vessel (size 450 mm dia & 2000 mm height) for pressurization of hydrant / sprinkler system complete with adequate pressure switches (as per design / requirement) with valves to operate as per operating sequences including 25 mm dia drain valve, air release valve with stop cock on the top, minimum 50 mm dia inlet with isolating valve duly painted from inside and outside with two coats of synthetic enamel paint over a coat of primer complete as required and Suitable cement concrete foundation with plaster, along with all neccessory floor supporting stand and foundation arrangement.(Vessel should be suitable for rated working pressure) as required complete in all respects and to the best satisfaction of Engineer-in-charge. |
| 3 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : |
| 4 | 25 mm nominal bore |
| 5 | 80 mm nominal bore |
| 6 | 100 mm nominal bore |
| 7 | 150 mm dia nominal bore |
| 8 | 200 mm dia |
| 9 | Makes:- Jindal/Hisar/Tata/Surya Tube. |
| 10 | Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904as required : |
| 11 | 4way - 150 mm dia M.S. Pipe |
| 12 | Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in allrespects, as required: (Terrace Pump) |
| 13 | (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 |
| 14 | b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, (10 KW) 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325. |
| 15 | (c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. |
| 16 | (d) Suitable cement concrete foundation duly plastered and with anti vibration pads. |
| 17 | 900 lpm at 56 m Head |
| 18 | Make:- Kirloskar/Siemens/Grundfoss |
| 19 | Supply, installation, testing and commissioning of Pressure switch for fire pumps of approved make,including necessary wiring and cut off valve up to central panel & other material as described in specifications. |
| 20 | Make:- Indfoss /System Sensor |
| 21 | Providing & Fixing of burden type Stainless Steel dial type pressure gauge with brass isolation valve and pipe of 100 mm dia with Caliberation: 0-20 Kg/cm2 as required complete in all respects and to the best satisfaction of Engineer-in-charge. |
| 22 | Make:- H Guru, Bell, Fiebig |
| 23 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : |
| 24 | 80 mm dia. |
| 25 | 100 mm dia. |
| 26 | 150 mm dia. |
| 27 | 200 mm dia |
| 28 | Makes:-Zoloto/Sant/Audco |
| 29 | Providing and fixing Cast Iron dual plated Check Valve (NRV) horizontal type with gunmetal seat non-return valve confirming to class - I of IS : 5312 including nuts, bolts, 1.5 mm thick compressed asbestos gasket as per table \\"E\\" and specifications as required complete in all respects and to the best satisfaction of Engineer-in-charge. |
| 30 | 80 mm dia. |
| 31 | 100 mm dia. |
| 32 | 150 mm dia. |
| 33 | Makes:-Zoloto/Sant/Audco |
| 34 | Providing & fixing stainless steel fire hydrant single headed landing valve with 80 mm N.B. flanged inlet, G.M spindle controlled 63 mm dia female instantaneous outlet type. SS coupling, blank cap, chain, twist release type lug & all accessories Conforming to IS standards as required complete in all respects and to the best satisfaction of Engineer-in-charge. |
| 35 | Make: Minimax/OMEX/Padmini |
| 36 | Providing & Fixing of wall mounting swinging type first aid fire hose reel with drum, hanging bracket, 30 Mtr. length x 20 mm dia high pressure hose reel tubing as per IS: 444 with gun metal (GM) shut off nozzle having 5 mm dia orifice. The hose reel shall be conforming to IS : 884-1985. Drum shall be fixed on adjoining wall through anchor fasteners / cement concrete block as and when required complete in all respects and to the best satisfaction of Engineer-in-charge.. |
| 37 | Make: Minimax/OMEX/Padmini |
| 38 | Providing & Fixing of 63 mm dia 15 m long non-percolating flexible hose (RRL- type A) as per IS : 636. Type A withStainless male & female instantaneous type coupling (IS 903) (For internal and External hydrant system) as required complete in all respects and to the best satisfaction of Engineer-in-charge. |
| 39 | Make: Minimax/OMEX/Padmini |
| 40 | Providing and Fixing Stainless steel 63 mm dia instantaneous pattern branch short pipe, 20 mm dia nozzle conforming to IS 903, suitable for inter connection to hose pipe coupling as required complete in all respects and to the best satisfaction of Engineer-in-charge. |
| 41 | Make: Minimax/OMEX/Padmini |
| 42 | Providing & fixing ball valve 25mm dia. as required complete in all respects and to the best satisfaction of Engineer-in-charge. |
| 43 | Make: Sant/Zoloto/Audico. |
| 44 | Weather proof standard fire hose cabinet made of 18 SWG powder coated fibre. sheet having single or double opening glazed (3.0 mm thick glass) shutter including necessary locking arrangement by allan key, stove enamelled Fire red finish (as per IS : 5, shade no. 536) with \\" Fire Hose\\" marked on front, suitable for housing 2 nos. 15m long 63 mm dia Hose pipe, 1 No. branch pipe & nozzle spanner as required complete in all respects and to the best satisfaction of Engineer-in-charge. |
| 45 | Make: Minimax/OMEX/Padmini |
| 46 | Providing & fixing of Bitumein sheet 4mm thick (pipekot) wraping & coating for underground pipe100 mm dia. as required complete in all respects and to the best satisfaction of Engineer-in-charge. |
| 47 | Providing, installation,testing and commissioning of Stainless steel Y strainer fabricated out of 1.6 mm thick stainless steel. Grade 304 sheet with 3mm dia hole with stainless steel flange including carriage of material in all leads and lift. |
| 48 | 100 mm dia. |
| 49 | 150 mm dia. |
| 50 | Makes:-Zoloto/Sant/Audco |
| 51 | ”Minimax” Mobile Wheeled Type Fire Extinguisher, ISI Marked (IS16018:2012), CE Certified, Pure Polyester PowderCoated Body with internal & external coating, rugged trolley with heavy duty wheel assembly fitted with shock absorbing bushes, Forged brass Cap Union, High durablility Vinyl label (3M make), QR Code label with printedserial number.P000027623 Minimax MF 60 Liters Fire Extinguishers-ISI Marked. |
| 52 | Make: Minimax/Aska/ Anshul Fire |
| 53 | ”Minimax” Mobile Wheeled Type Fire Extinguisher, ISI Marked (IS16018:2012), CE Certified, Pure Polyester PowderCoated Body with internal & external coating, rugged trolley with heavy duty wheel assembly fitted with shock absorbing bushes, Forged brass Cap Union, High durablility Vinyl label (3M make), QR Code label with printedserial number.P000027623 Minimax BC 50 kg Fire Extinguisher - ISI Marked. |
| 54 | Make: Minimax/Aska/ Anshul Fire |
| 55 | Supply, installation, testing and commissioning of electrically driven high pressure centrifugal fire hydrant / sprinkler pump, suitable for automatic operation consisting of the following: |
| 56 | (a).Multistage Multi-outlet, centrifugal pump (Flow : 2280 LPM and Head : 70 mtr), suitable for operation on 415 volts ± 10 %, 3 phase, 50 HZ A.C supply. The installation shall be complete with flexible coupling and coupling guard as required. Fire pump shall have C.I. casing, CS diffusers, bronze impeller (hard finished and dynamically balanced) and S.S. (410) Shaft with mechanical seal, capable for delivering the required flow at the required head to ensure a minimum pressure of 3.5 Kg/Sqcm at the farthest or topmost hydrant / sprinkler. The installation shall be complete with necessary pressure gauge with gun metal shut off cock on delivery side.(b).Squirrel cage induction motor, TEFC type suitable for operation on 415 volts, 3 phase 50 HZ A.C supply, of suitable Capacity (45 KW.) for the above pump with synchronous speed of 2900 RPM, conforming to IP 55 protection & class F insulation. The motor shall conform to IS 325-1978 (up to date) with flexible coupling and coupling guard, complete as required.Common base plate for (a) and (b) from G.I.Channel for required size.(d)d) Suitable RCC pump-Foundations as per manufactures design and 4 nos Dunlop (cushy foot) heavy duty Antivibration mounting pads. |
| 57 | Make:- Kirloskar/Siemens/Grundfoss |
| 58 | Supply, installation, testing and commissioning of Diesel Engine driven fire pump suitable for automatic operation comprising of the following and conforming to BS 649/IS 10002 all amended upto date. |
| 59 | A) Horizontally mounting,centrifugal type single/multi-stage fire pump having cast ironbody, bronze impeller,stainless steel shaft &capable of delivering 2280LPM against a total head of 70 M complete withnecrssary Y stainer on the sunction side and pressure gauge with stop cocks etc. on the delivery side including bybass arrangement (with 50mm dia GM stop valve and upto 5mGI stop valve and upto 5M GI medium pipe) for perodical testing of thepumping set of the pumping set as per TAC rules. b) Water cooled TAC approved Diesel Engine suitable for the developing at least 62 BHP at 2150RPM for above pumping complete with autmatic starting mechanism, batteries,automatic battery charger unit,flexble coupling withthe pump,coupling with the pump,fuel tank,silencer,exhaust pipe with insulation appro. 25m length& all standard accessories as requrid asper TAC rules including earthing,mandatory spares and tool kit. c) Common bed plate for mounting pump and Engine fabricated of suitable MS channel as per manufacturer recommendations. d)Suitable RCC pump foundation as per manufacture design 8Nos Dunlop Anti-vibration(cushy foot) heavy duty mounting pad. |
| 60 | Make:- Kirloskar/Siemens/Grundfoss |
| 61 | Supply, installation, testing and commissioning of jockey pump (pressurization pump) comprising of the following: |
| 62 | (a)Horizontal pump(Flow :180 LPM and Head :70mtr) suitable for operation on 415 volts ± 6%, 3 phase, 50 HZ A.C supply. The installation shall be complete with Flexible coupling and coupling guard, complete as required.The pump casing shall be CI, shaft shall be SS & impeller/ shaft sleeve/casing wearing ring shall be bronze. The pump shall be provided with mechanical seal The system shall be complete with necessary pressure gauge with gun metal shut off cock on delivery side. b)Squirrel cage induction motor totally enclosed fan cooled type suitable for 415 volts +10%-10% 3 phase 50HZ AC supply of suitable capacity(appro11KW) for the above pump with synchronous speed of 1500/3000 RPM confirming to IS325 &duly coupled with above pump coupled with flexible coupling including earthing as per relevant Indian Standard and specification. c) Common bed plate for mounting pump and Motor fabricated of suitable MS channel as per manufactures recommendation. d)Suitable RCC pump foundation as per manufactures design Dunlop 4 Nos Dunlop Anti-vibration (cushy foot) heavy duty mounting pads. |
| 63 | Make:- Kirloskar/Siemens/Grundfoss |
| 64 | SITC of electrical main control panel made 16 gauge sheet with power coating consisting of following items.1No. Voltmeter with selector switch 3Nos Ampere meter with selector switch 3Nos.sets ofcurrent transformer MCCB 250 Amp-1No MCCB 200 Amp 1No Automatic starter,60HP motor battery charging set Engine start-stop Relay Engine control AMF relay Engine crank relay Audio Hooter DC control relay Engine control selector switch 63 Amp MCCB-starter 15 HP motor 3 set of the start stop switch 9Nos.indicating lamps Automanul switchset, interlocking kit/terminal charging rate selector switch of trickle/boost. |
| 65 | Makes:- Advance/Delight Power Control or equivalent. |
| 66 | Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1000 bolts grade at a surface the cable run shall be fixed on M.S. clamps etc. of suitable size & brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per dire |
| 67 | Armoud Cable 10 sq. mm (4 Core) |
| 68 | Armoured cable16 sq. mm (4 core) |
| 69 | Armoured cable70 sq. mm (3.5 core) |
| 70 | Make: KEI/ Polycab/Finolex. |
| 71 | Fabricating & Supply, installing, testing and commissioning of sheet steel clad floor mounting control panel having suitable size for control of 1 nos. booster pumps 15KW/20 HP each having suitable incoming MCCB, incoming voltmeter with selector switch and fuses. DOL Starter with hand reset overload cum single phase preventor type relay, Ammeters to read current in any one phase, alarm with reset push button which will automatically reset for the next cycle. (As per the Technical Specifications) (At Terrace floor) |
| 72 | Providing and Fixing Water Monitor 80 mm dia with Gun Metal 20 mm dia nozzle , as required complete in all respects and to the best satisfaction of Engineer-in-charge. |
| 73 | Make: Minimax/Padmini/ OMEX |
| 74 | Providing and Fixing FB - 5X Foam making Branch with Pickup Tube , as required complete in all respects and to the best satisfaction of Engineer-in-charge. |
| 75 | Make: Minimax/Padmini/ OMEX |
| 76 | Suppling and installation following Size of Perforated Hot Dipped Galvanised iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5% in convenient sections, joined with connectors, suspended from the celling with G.I suspenders including G.I bolts & nuts,etc as required. |
| 77 | 225 mm width X 50 mm depth X 1.6 m Thickness Please Enable Macros to View BoQ information |
