|
| 1 | Providing and fixing skirting with HD Wall paper Flakes ballancing lamination and edges to be sealed with edge bending tape 2mm (Two millimetre) thick of approved brand with necessary fixing arrangements etc all complete upto all floor level as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Royality, Malkhana, Octroi, GST, Toll Tax, Sales tax or any other taxes imposed by the Government. |
| 2 | Providing and fixing andosied aluminium work for door window, ventilator and partitions with extrued built up standard tublurand other sections of approved make confirming of IS 733 and IS 1285 andosied transparent fixed with rawl plugs and screw or with fixing clips with expansion hold fastners i/c necessary filling up of gaps at junctions all complete as per architectural drawings and the directions of Engineer-in-Charge, including carriage of materials up to all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll tax, Sale tax, GST or any other taxes imposed by the Government. |
| 3 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-Charge (Cost of aluminium snap beading shall be paid in basic item) With float glass panes of 4.0mm (Four point zero millimetre) thickness (weight not less than 10 kg/ sqm) as per direction of Engineer-in-Charge, including carriage of materials up to all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll tax, Sale tax, GST or any other taxes imposed by the Government. |
| 4 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 5 | Providing and fixing 300x16mm (Three hundered into Sixteen millimetres) nominal size brass sliding door bolts ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 6 | Providing and fixing 200x10mm (two hundered into Ten millimetres) nominal size Brass Tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera. complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 7 | Providing and fixing 150mm (One hundred twenty five millimetre) Brass handles ISI marked anodised (anodic coated not less than grade AC10 as per IS : 1868) tansparent or dyed to required colour and shade with necessary screws etcetra complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, GST, toll tax or any other taxes imposed by the Government. |
| 8 | Earth work in excavation in foundation for all types of road structures such as retaining walls, breast walls, culverts, drains, parapets and other similar structures in all kinds and classification of soil, including saturated soil comprising of ordinary mix soil, ordinary rock, hard rock, chiseling/ wedging out rocks (where blasting is prohibited) complete in accordance with the lines and dimensions shown in the drawings, including setting out, construction of shoring, bracing, removal of stumps and other deleterious materials and disposal of excavated material upto any leads and lifts including dressing of sides and backfilling in trenches with excavated suitable approved materials to the original surface in layers not exceeding 150mm (One hundred fifty millimetre) compacted thickness including shoring strutting and pumping or bailing out water (surface and sub-soil water) up to any depth and any quantum of water and cleaning of slush which may arise out during dewatering complete as per drawing and MORD Technical Specification section 300 & 1600 and as per the direction and the entire satisfaction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, GST, toll tax or any other taxes imposed by the Government. |
| 9 | Providing and laying mechanically mixed and vibrated concrete for plain cement concrete, Grade M-10 (M-Ten) nominal mix 1:3:6 (one cement isto three sand isto six graded crushed stone aggregate 20mm (twenty millimeters) nominal size) in or under water in open foundation of all type of structure like Drains, etcetera including pumping or bailing out water/dewatering (surface and sub soil water) removal of the slush which may arise at the time of laying under water, for all heights/depths, including cost of form work complete as per drawing and MORD technical specification clause 802, 803, 1202 & 1203 or as per direction and the entire satisfaction of Engineer-in-Charge, including carriage of materials up to all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll tax, Sale tax, GST or any other taxes imposed by the Government. |
| 10 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, GST, toll tax or any other taxes imposed by the Government. |
| 11 | Providing and fixing Matrix EWC (European water closet) of vitreous China fixed with Jet pressure of Hindware/ Cera/Jaguar in Divyang toilet complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Octroi, GST, Toll Tax Sale tax or any other taxes imposed by the Government. |
| 12 | Providing and fixing 3mm (Three millimetre) thick ACP (Alluminum Comosite profile) including fixing with acrews and nails complete (frame work will be measured separately as per HPPWD specification and as per the direction of Engineer in Charge including carriage of material with all leads and lifts and other incidental. The rates including including Royality, Malkhana, Octroi, toll tax, sale tax or any taxes imposed by the Government. |
| 13 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per HPPWD specification and as per the direction of Engineer-in-Charge including carriage of material with all leads and lifts and other incidental. The rates including including Royality, Malkhana, Octroi, toll tax, sale tax or any taxes imposed by the Government. |
| 14 | Providing and laying mechanically mixed and vibrated cement concrete 1:4:8 (one cement isto four sand isto eight graded crushed stone aggregate 40mm (forty millimeter) nominal size) for plain cement concrete, in or under water in open foundation for all types of structures, including pumping or bailing out water/ dewatering (surface/sub-soil water) and including removal of slush which may arise at the time of laying under water for all heights/depth and any quantum of water including cost of form work and curing complete as per drawing and MORD technical specification 802, 803, 1202 & 1203 and as per the direction and the entire satisfaction of Engineer-in-Charge, including carriage of material with in all leads lifts and other incidentals. The rates including Royality, Malkhana, Octroi, Toll tax, Sale tax, GST or any other taxes imposed by the Government. |
| 15 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead as per HPPWD specification and as per the direction of Engineer-in-Charge including carriage of material with all leads and lifts and other incidental. The rates including including Royality, Malkhana, Octroi, toll tax, sale tax or any taxes imposed by the Government. |
| 16 | Providing and laying size of Tile 600x600mm (Six hundred into Six hundred millimetre) vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm (Twenty millimetre) thick cement mortar 1:4 (One cement isto four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etetera, complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Royality, Malkhana, Octroi, GST, Toll Tax, Sales tax or any other taxes imposed by the Government. |
| 17 | Tile work 8mm (Eight millimetre) thick in skirting, risers of steps and dado up to 2m height over 12mm thick bed of cement mortar 1:3 (One cement isto coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade complete as per architectural drawings and the directions of Engineer-in-Charge, including carriage of materials up to all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll tax, Sale tax, GST or any other taxes imposed by the Government. |
| 18 | Repair to plaster of thickness 12mm (Twelve millimetre) to 20mm (Twenty millimetre) in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 19 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with \\"S\\" or \\"P\\" trap including dismantling of old WC seat and \\"S\\" or \\"P\\" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per drawing as per direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government. |
| 20 | Providing and fixing wash basin with C.I. brackets, 15mm (Fifteen millimetre) C.P. brass pillar taps, 32 mm (Thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400mm (Five hundred fifry into four hundred millimetre) with a pair of 15 mm (Fifteen millimetre) C.P. brass pillar taps complete as per drawing as per direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government. |
| 21 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings complete as per drawing as per direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government. |
| 22 | Providing and fixing PVC Pipes 150mm (one hundred fifty millimetre) dia 6 Kg (Six kilogramme) Pressure as per direction of Engineeri in charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government. |
| 23 | Providing and fixing 15mm (fifteen millmeter) nominal bore brass ball valve (horizontal plunger type) high pressure with polythene plastic floats complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is including GST, Sale tax, Toll tax or any other taxes imposed by the Government. |
| 24 | Providing and fixing G.I. Elbows 15mm dia (Fifteen millimetre) etcetera complete and as per direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.. |
| 25 | Providing and fixing G.I. Nipple 15mm (Fifteen millimetre) dia etcetera complete and as per direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government. |
| 26 | Providing and fixing 32mm (Thirty millimetre) P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings Flexible pipe complete and as per direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government. |
| 27 | Providing and fixing grating of approved quality and colour 100mm (One hundred millimetre) nominal dia complete and as per direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government. |
| 28 | Providing and fixing grating of approved quality and colour 125mm (One hundred twenty five millimetre) nominal dia with 25mm (Twenty five millimetre) waste hole complete and as per direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government. |
| 29 | Providing and fixing 110mm (One hundred ten millimetre) dia PVC plain bend ISI marked including fixing with approved adhesive etcetera complete and as per direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government. |
| 30 | Providing and fixing PVC Pipes 110mm dia (One hundred ten milimetre) etcetera complete and as per direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government. |
| 31 | Providing and fixing CPVC Pipes 15 mm (Fifteen millimetre) dia as per direction of Engineer-in-Charge. including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.. |
| 32 | Providing and fixing C.P. Brass bib cock with capstan head 15mm dia complete as per drawing as per direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government. |
| 33 | Providing and fixing C.P. Long Nose Cock with capstan head 15mm dia as per direction of Engineer in Charge.including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.. Please Enable Macros to View BoQ information |
