|
| 1 | Dismantling of plain/corrugated steel sheeting, any gauge or thickness including Nainital or similar pattern roof covering, complete all as specified and as directed. |
| 2 | M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed. |
| 3 | M&L Prepainted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.. |
| 4 | Dismentling of floor hearth or wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises , complete all as specified and as directed.. |
| 5 | M & L Vitrified ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floor etc, Incl screed bed 15 mm thick in CM (1:6), complete all as specified and as directed. |
| 6 | Material and labour, non-skid coloured ceramic tiles 7mm to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18sqm, in floors etc, set jointed in neat grey cement slurry and pointed in white or coloured cement to match, laid over and including 10 mm thick screed bed in CM (1:4), complete all as specified and as directed. |
| 7 | M&L for coloured glazed designer ceramic tiles 300 x 450 x 7 to 8mm thick on vertical surface as in dado/skirting and jointed in neat cement slurry and pointed with white/colour cement to match with the surface over 15mm thick rendering in CM 1:4 , complete all as specified and as directed. |
| 8 | M&L for chequerd cement concrete tiles 20cmx20cm x22-25mm thick, set jointed and pointed in neat cement slurry with grey cement and pigments machine pressed in floors including screed bed 15mm thick in CM 1:4 , complete all as specified and as directed. |
| 9 | M&L for PCC 1:2:4 type B1 25mm thick (20mm graded aggregate) as in floors etc , complete all as specified and as directed. |
| 10 | Demolition of PCC in ground floor and pavings n. exc 15 cm thick below or above ground level, complete all as specified and as directed. |
| 11 | Material and labour for 75 mm thick cement concrete type C-2, 1:3:6 ( using 20 mm graded aggregate) as in path/pavings/ floor/plinth protection etc laid in bays incl finishing the concrete surface even and smooth without using extra cement , complete all as specified and as directed. |
| 12 | Dismantling wall and ceilling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets, any thickness, cover fillets etc , complete all as specified and as directed. |
| 13 | S&F Wooden wall/ceiling panelling with tongued & grooved joint laminated over high quality DHF,8 mm to 10 mm thick fixed to timber frame work of soft wood 75 mm x 50 mm @ 600 mm c/c on both side,, complete all as specified and as directed. Note :-The rate quoted shall be included timber frame work & biding as per required. |
| 14 | M&L 4mm thick Pine wood veneered decoretive, Plywood grade 1 (BWR resin) with decoretive face veneers on one faces , fixed with nails to timber frame work on ceiling, complete all as specified and as directed. |
| 15 | M&L for 4 mm thick Pine wood Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face; fixed with nails to timber frame work on wall, complete all as specified and as directed. |
| 16 | Dismantling of timber scantling 40 Sqcm and over in section in any position in unframed work, complete all as specified and as directed. |
| 17 | M&L for second class soft wood (Kail) clean swan timber fixed in scantling, complete all as specified and as directed. |
| 18 | All as per Ser item No 17 above but except timber , complete all as specified and as directed.. (Note : Serviceable timber obtained from ser item No 16 above to be used). |
| 19 | Dismantiling of timber fillets rails, posts rafter purlins etc under 40 Sqcm in section in any position in framed work, complete all as specified and as directed. |
| 20 | S&F second class hardwood plain fillets square, rectangular in section exc 13 Sqcm & not exc 25 Sqcm, complete all as specified and as directed. |
| 21 | S&F second class hardwood plain fillets square, rectangular in section not exc 3 Sqcm, complete all as specified and as directed. |
| 22 | Dismantling of boarding any description fixed in any position with nails, complete all as specified and as directed. |
| 23 | M&L, for weather boarding of 2nd class softwood, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30 mm laps , complete all as specified and as directed.. |
| 24 | Fixing only for weather boarding of 2nd class softwood, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30 mm laps , complete all as specified and as directed.. |
| 25 | S&F facia boarding of 2nd class soft wood planed one side with but joints 20mm thick and champhered one side and the boarding is matched, complete all as specified and as directed. |
| 26 | Taking down chowkats with shutters (without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 sqm each, complete all as specified and as directed. |
| 27 | Taking down chowkats with shutters (without taking off shutters from the frame) n. exc 1.5 sqm, complete all as specified and as directed. |
| 28 | S&F 2nd class hard wood plain soild, straight chowkats and frame wrought, framed rebated on soild, rounded or chamfered, put together with pinned at joints , complete all as specified and as directed. |
| 29 | S&F 35 mm thick, 2nd class hardwood, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides; supplied and fitted to chowkats, , complete all as specified and as directed.. |
| 30 | S&F 2nd class hard wood 35 mm thick glazed skeleton shutters open rebated and prepared to receive guage etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc and fitted to chowkats, complete all as specified and as directed. |
| 31 | S&F 2nd class hard wood 30 mm thick glazed skeleton shutters open rebated and prepared to receive guage etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc and fitted to chowkats, complete all as specified and as directed. |
| 32 | MS Cold rolled Butt hinges medium weight 100 mm long , complete all as specified and as directed. |
| 33 | MS Cold rolled Butt hinges medium weight 75 mm long , complete all as specified and as directed. |
| 34 | S&F 300mm long Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy, complete all as specified and as directed. |
| 35 | S&F 150mm long Anodised Aluminium tower bolt , complete all as specified and as directed. |
| 36 | S&F 100mm long Anodised Aluminium tower bolt , complete all as specified and as directed. |
| 37 | S&F 150mm long extruded aluminium alloy handle , complete all as specified and as directed. |
| 38 | S&F 100mm long Anodised Aluminium alloy handle , complete all as specified and as directed. |
| 39 | S&F galvanised mild steel wire cloth 0.46 mm nominal dia of wire and avarage width of aparture 1.18 mm and fixed with tinned tacks ro galvanised wire stapple, complete all as specified and as directed. |
| 40 | S&F Sheet glass ordinary quality & glazing with oil putty in square n-exc. 0.5 sqm in each pane 4mm thick, complete all as specified and as directed. |
| 41 | Demolition of brick work or stone / boulder masonry built in CM including all quoins arches, pillars , complete all as specified and as directed. |
| 42 | Brick work with sub-class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 , complete all as specified and as directed. |
| 43 | M&L for walling or random rubble,uncoursed well bounded bedded and solidly hearted, built in cement mortar 1:6. , complete all as specified and as directed. |
| 44 | M&L cement concrete type B-1, 1:2:4 (using 20mm graded aggregate ) as in copping, benching etc , complete all as specified and as directed. |
| 45 | Taking down cement or lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish materials where directed at low lying areas in defence land complete all as specified and as directed. |
| 46 | M&L Rendering 15 mm thick on stone masonry surfaces or surface other than fair face of brick-work finished even and smooth without using extra cement in cement mortar 1:4 , complete all as specified and as directed.(using integral liquid water proofing compound which will be paid separately) |
| 47 | M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement, complete all as specified and as directed. |
| 48 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old/ new surfaces, complete all as specified and as directed. |
| 49 | M&L for preparation of old and previously untreated plastered surface applying Two or more coats of fire resisting paint over Surfaces of any description wood, steel, iron, concrete, brick, stone, etc, complete all as specified and as directed. |
| 50 | M&L for Perparation of new or previously untreated surface and applying Two or more coats of fire resisting paint over Surfaces of any description wood, steel, iron, concrete, brick, stone, etc. over a coat of primer, complete all as specified and as directed. |
| 51 | M&L two coat of synthetic enamel paint on wooden surface of any description not otherwise described over 10 cm width or girth including preparation of old surfaces , complete all as specified and as directed. |
| 52 | Perparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer, complete all as specified and as directed. |
| 53 | S&F in repairs MS decorative curtain rod 20 mm dia covered with coloured PVC layer with decorative ends incl PVC Knobs and MS Bracket both ends , complete all as specified and as directed.. |
| 54 | S & F 600 mm x 450 mm bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers , complete all as specified and as directed. |
| 55 | Taking up or down steel tubing and connections, size 15mm dia bore, including cleaning for re-fixing or removal to stores, , complete all as specified and as directed.. |
| 56 | Taking up or down steel tubing and connections, size 20mm dia bore, including cleaning for re-fixing or removal to stores, , complete all as specified and as directed.. |
| 57 | Material and labour, galvanised steel water tubing, 'medium grade', with all fittings and fixed complete to wall and ceiling or laid under floor, 15 mm dia bore pipes, including cutting existing steel tubing & screwing, if required for alterations and additions, , complete all as specified and as directed.. |
| 58 | Material and labour, galvanised steel water tubing, 'medium grade', with all fittings and fixed complete to wall and ceiling or laid under floor, 20 mm dia bore pipes, including cutting existing steel tubing & screwing, if required for alterations and additions, , complete all as specified and as directed.. |
| 59 | Supply and fix, bib taps, cast copper alloy, fancy type with capstan head, crutch or butterfly handle chromium plated, screwed down high pressure, screwed for iron pipe or for brass ferrule 15mm dia bore, fixed as in repair, , complete all as specified and as directed.. |
| 60 | Supply and fix, angular stop valves , cast copper alloy, screwed down high pressure, fancy type with crunch or butterfly handle, chromium plated, screwed both ends for iron pipe or for unions, or for 15mm dia bore, fixed as in repairs, , complete all as specified and as directed.. |
| 61 | Supply & fix, PVC connections of PTMT, non corrosive, with nuts & washers on both ends, 450mm long, suitable for 15mm dia bore pipe, fixed as in repairs, , complete all as specified and as directed.. |
| 62 | Supply and fix, grating square (SLIT) 150mm size, of PTMT (Openable), fixed as in repairs, , complete all as specified and as directed.. |
| 63 | Supply and fix, Chromium plated brass shower rose 125mm dia with swivel joints, fixed in repairs, , complete all as specified and as directed.. |
| 64 | Supply and fix, towel rail 600mm long (between flanges), 20mm dia, ‘D’ type, chromium plated brass, fixed to walls with screws and plastic cleats, fixed as in repairs, , complete all as specified and as directed.. |
| 65 | S & F PVC (SWR) bend any radious 110mm bore , complete all as specified and as directed. |
| 66 | S & F PVC (SWR) bend any radious 75mm bore, complete all as specified and as directed. |
| 67 | S & F PVC (SWR)gully trap 125/110mm setting and jointing with solvent cement as fixed in repairs, complete all as specified and as directed. |
| 68 | S & F PVC(SWR) reducers 75/110mm bore, complete all as specified and as directed. |
| 69 | S & F 100mm Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and as directed. |
| 70 | S & F PVC (SWR) 110mm Junction single (single T) equal or unequal, complete all as specified and as directed. |
| 71 | S & F 75mm bore stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, incl bolts and nuts and securing ends of stays to wall or roof, complete all as specified and as directed. |
| 72 | S&F in repair Vitreous China one piece wash down water closet pan (pedestal pattern) including flushing cistern, seat cover and all necessary fittings , white, complete all as specified and as directed. |
| 73 | S&F in repair Vitreous China wash basin with pedestal pattern, white, flat back, size 550x400mm incl CP waste coupling and PVC wate pipe and MS steel brackets, complete all as specified and as directed. |
| 74 | S&F in repair 32 mm Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm 45gms/40mm-60 gms), complete all as specified and as directed. |
| 75 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and as directed. |
| 76 | S&F in repair 15 mm dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and as directed. |
| 77 | S & F 600 mm x 450 mm bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed. |
| 78 | Dismantling of stone slabs and tiles of any description or thickness laid dry or laid dry and pointed in any mortar in floors, aprons etc complete all as specified and as directed. |
| 79 | M & L machine cut Kota stone slab flooring 18-20mm thickness per sample kept in GE's office laid over and incl 20mmthick cement screed basein CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting, rubbing, gridding and polishing to achive mirror finish, complete all as specified and as directed. |
| 80 | M& L for 0.9 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions, complete all as specified and as directed. |
| 81 | S&F 40mm dia cup board knobs fixed with nut and washers of mild steel bright finish , complete all as specified and as directed. |
| 82 | S&F Mortice lock vertical type mild steel 4 lever 100 mm fixed in repair, complete all as specified and as directed. |
| 83 | S & F Continuous (piano) hinges,mild steel, bright finish or electro galvanised, complete all as specified and as directed. |
| 84 | S&F Powder coated aluminium sliding windows frame with movable shutter ( sliding on minimum two PVC roller of best quality, for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and incl 5.50 mm thick glass & stainless steel wire messs fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below- (i) Window frame :63x35mm X 1.48 mm thick for two tracks.(ii) Top/bottom rail and style / rail of shutter : 19x38x1.48mm thick and over. (iii) Aluminium beading - 0.7mm thick (iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete. (v) Aluminium fittings such aluminium suitable handle with auto interlocking closing(vi) Making good of wall surfaces to match with existing surfaces , complete all as specified and as directed.. |
| 85 | S&F aluminium alloy powder coated aluminium door frame fixed with side hung shutters and glazing fixed with and including 5.50mm thick tinted glass fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below , complete all as specified and as directed. (a) Frame 100x44x1.48mm thick with rawl plug(b) Middle and lock rail : 150x44x1.48mm thick(c) Bottom rail : 150x44x1.48mm thick(d) Top rail/style : 85x44x1.48mm thick(e) Aluminium beading : 0.7mm thick(f) Aluminium handle D type 150mm long, aluminium tower bolt 9.9mm dia shoot 200mm long brass mortise lock 100mm 4 leaver aluminium stopper, cleat double action floor spring hydraulically regulated made of n.less than 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other part of steel heavy duty ( Make Sandhu ISI marked or its equivalent approved make)(g) Making good of wall surface to match with existing surface complete.Note: including aluminium outside door shetter with wire mesh and all fittings. |
| 86 | S & F partition wall of powder coated aluminium hollow sections members of size 63.50 mm x38mmx 1.48 mm thick with distance of vertical hollow section, 1.2mtr to 1.8 mtr height of wall having top rails ,bottom rails and middle rail of size 63.50 mm x38mm x 1.48 mm and upto middle rail wall panels shall be covered by 5 mm thick aluminium composite panel LDPE core PET coating ( both side decorative type )with aluminium clip height of middle rail shall be 1 meter from floor and remaining portion above middle rail shall be provided with 5 mm thick glass incl eaching approved designed with aluminium stiprs/beadings with rubber gasket as per existing or as provided, complete all as specified and as directed. |
| 87 | M&L Rendering 15 mm thick on stone walling surfaces finished even and smooth with using extra cement in cement mortar 1:4 , complete all as specified and as directed.. |
| 88 | Material and labour, preparation of new plastered or unplastered surfaces of walls and applying two coats of cement based paint, and removal of rubbish off the premises upto a distance not exceeding 50metres, complete all as specified and as directed. |
| 89 | Taking down carefully copper/aluminum point wiring (light. Fan, socket or power) complete, incl fittings such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc. |
| 90 | M&L for point wiring for using 1.5 Sqm nominal cross section area copper conductor multistandard PVC unsheathed, FRLS cable in and including using pvc casing caping not less than 25mm size and fitings including pvc box with suitable size of pvc sheet for top cover(ISI marked) fitted with chromium plated steel screws and washer and 1.5 Sqmm nominal cross section area multistandared copper conductor FRLS green pvc insulated unsheathed earth wire and conecting to earth dolly using color code as per IS including terminal boxes suitable for fixing socket and switches all as specified as directed by engineer in charge. |
| 91 | (a) One light point/fan point/Ex fan point controlled by one 5 Amps switch one way |
| 92 | (c) One 3 pin 5 Amp switch socket outlet on independent board |
| 93 | (d) One 3 pin 5 Amp switch socket outlet on same board with accessories |
| 94 | M&L for point wiring for using 2.5 Sqm nominal cross section area copper conductor multistandard PVC unsheathed, FRLS cable in and including using pvc casing caping not less than 25mm size and fitings including pvc box with suitable size of pvc sheet for top cover(ISI marked) fitted with chromium plated steel screws and washer and 2.5 Sqmm nominal cross section area multistandared copper conductor FRLS green pvc insulated unsheathed earth wire and conecting to earth dolly using color code as per IS including terminal boxes suitable for fixing socket and switches all as specified as directed by engineer in charge. |
| 95 | S&F switch piano Flush type, single pole, one way 6 amp 240 volts, complete all as specified and as directed |
| 96 | S&F switch piano Flush type, single pole, 15 amp 240 volts, complete all as specified and as directed. |
| 97 | S&F Socket outlet 2 in 1, 3 pin, 5 Amps, flush type complete with gang box all as specified and as directed |
| 98 | S&F Socket outlet 2 in 1, 3 pin, 5 and 15 Amps, flush type complete with gang box all as specified and as directed. |
| 99 | S&F ceiling rose surface bakelite 65x50mm with three terminals, complete all as specified and as directed. |
| 100 | S&F in repairs Distribution Board, SPN 4 Way, Double door complete all as specified and as directed |
| 101 | S&F in repairs Distribution Board, SPN 8 Way, Double door complete all as specified and as directed |
| 102 | S & F in repairs MCB,DP 40 Amps with breaking capacity 10 KA 240 Volts B curve, complete all as specified and as directed |
| 103 | S & F MCB Single pole 6-32A Amps with breaking capacity 10 KA 240 Volts B Curve, complete all as specified and as directed |
| 104 | Supply and fixing LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 105 | S&F LED light fitting 1x10 bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed. |
| 106 | S&F LED bulb 12 W, 220 V suitable size from ceiling rose, complete all as specified and as directed. |
| 107 | S&F Lamp Holder, PVC/Polycarbonate type with black plate suitable for batten fitting, complete all as specified and as directed. |
| 108 | M & L sub main wiring with two run single core 6 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia PVC conduit/casing caping, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 10 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion etc complete , complete all as specified and as directed.. Note: Two runs of 6 sqmm and one run of 4 sqmm cable and one run of casing capping shall be measured as one RM. |
| 109 | M&L for earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to GI strip 32 x 6 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion all as specified and directed. |
| 110 | Supplying only PVC flat twin core cable PVC insulated aluminium conductor size 10 Sqmm 2 core, complete all as specified and as directed. |
| 111 | S & F modular type switch 6 Amps, one way one module, complete all as specified and as directed. |
| 112 | S & F Modular Type Socket outlet, 6 Amps, 2/3 pin combined 2 module , complete all as specified and as directed. |
| 113 | S & F Modular Type Socket outlet, 6/16 Amps,combined 2 module, complete all as specified and as directed. |
| 114 | Material and labour for white cover with frame suitable for accommodating 01 Nos module switch/socket etc, complete all as specified and as directed. |
| 115 | Material and labour for white cover with frame suitable for accommodating 02 Nos module switch/socket etc, complete all as specified and as directed. |
| 116 | Material and labour for white cover with frame suitable for accommodating 03 Nos module switch/socket etc, complete all as specified and as directed. |
| 117 | Material and labour for white cover with frame suitable for accommodating 4 Nos module switch/socket etc, complete all as specified and as directed. |
| 118 | Material and labour for white cover with frame suitable for accommodating 6 Nos module switch/socket etc, complete all as specified and as directed. |
| 119 | Material and labour for white cover with frame suitable for accommodating 8 Nos module switch/socket etc , complete all as specified and as directed. |
| 120 | Supply and fixing PVC body fresh air fan with PVC blades, ISI marked, 225 mm sweep with louvers and connecting up including provision of three core flexible copper wire of size 1.5 sqmm from ceiling rose to fresh air fan complete in all respect, complete all as specified and as directed. |
| 121 | M&L for submain wring using proper colour coding with 3 runs of single core, PVC insulated, FRLS unsheathed suitable for 1100 volt, Multistranded, copper conducter cable of size 6 Sqmm drawn and including PVC conduit medium grade not less than 25 mm dia, ISI marked concealed in wall/roof etc with required accessories complete all as speacified and directed. Note :- (i) The minium size of PVC conduct shall be 25mm however higher shall be used as per numbers of conductor to be pass through the conduit. Engr-in-Charge shall ensure for proper size of PVC conduit be used at site. (ii) Seperate conduit shall be used for each submain wiring circuit irrespective of any number of wire. (iii) 3 runs of conductor and one run of conduit shall be measured as one run. |
| 122 | S&F LED Lamp 9 W 'T' type, complete all as specified and as directed. |
| 123 | Supply and fix SMD LED panel recess/surface 15 watt Round/square type ' LED ceiling light with extruded aluminium housing and milky diffuser including connecting up with twin core twisted flexible copper conductor cable with suitable size of 170-230 Volts, 50HZ , complete all as specified and as directed. |
| 124 | Supply and fix Track light bed side decorative type, complete all as specified and as directed. |
| 125 | Supply and fixing angular holder, PVC body complete with wiring etc, complete all as specified and as directed. |
| 126 | Note:- Schedule of credit Rs 78,957.52 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents. Please Enable Macros to View BoQ information |
