|
| 1 | RMI10 Air Swing Function Size 1177*942*1446Pre galvanized MS, Thickness 3mm |
| 2 | RMI 11 Seated Chest Press1726*692*1707mmPre Galvanized MSThickness 3mm |
| 3 | RMI 16X Waist Twister Triple1409*1250*1246mmPre Gav MSThickness 3mm |
| 4 | RMI-13 Stair Stepper with Glider Functions1036*736*1343mmPre galvanized MSthickenss 3mm |
| 5 | RMI 8X Pull Chair Double Functions2187*902*1707Pre Galvanized MSThickness 3mm |
| 6 | RMI 7X AB Trainer/Sit up Bench1440*1468*518mmThickness 3mmPre galv MS |
| 7 | RMI 6 Leg and Thigh Exerciser/ Air Walker Functions992*505*1380mmPre Galv MSThickness 3mm |
| 8 | RMI 4 Leg Press 2044*494*1504mmPre Galv MSThickness 3mm |
| 9 | RMI 3 Cross Walker Functions1612*605*1545mmPre Galv MSThickness 3mm |
| 10 | Pull Chair: Providing, designing and fixing of Pull pair of size 2500 X 800 X 2000 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber at top end. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc. Including Contractor Profit, overhead charges, GST and all others charges. |
| 11 | Arm Wheel :- Providing, designing and fixing Arm Wheel in a pair of size 850 X 800 X 1800 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be. Including Contractor Profit, overhead charges, GST and all others charges. |
| 12 | SINGLE SHOULDER PRESSMain Frame: 0114 *3 mm thick M.S pipe and subordinate tube is of 088*3.0 largethicknessM.S pipe. Handle: is made of 088 *3 mm thick Pipe and 025 mm round M.S bright bar inbending design.All remaining frame is made by 088 *3mm thick MS pipe.Weight plates: Rubberized moulding round weight plates are used.Weight Plates Holder with spring lock and spare weights holder: is made by hard chrome Ope A. plated mild stee!048 D!A pipe open front covered with half round cap and holder end iscovered with heavy quality rubber ring of OD-68 mm and ID-48 mm with 10mm wall Goploythickness for free weight noiseless operations.Bearing: Lubricated high grade6305 `2RS`steel ball bearing.Base plate: is OD166, ID 116, and 6 mm thick.Pins: are made up of M.S bright bar.Bearing bushes: 075mm OD seamless pipe.Weight plate mounting pipe is of 048 mm MS pipe.Seat Frame: made up of hard chrome plated mild steel 48 DIA round pipe.Hardware All hardware`s uses button heads bolts and nuts made up of high tensile steel.Hand grips: Hand grips is used on handles wherever necessary made up of high-qualityrubber and handle ends are covered with aluminum/pp/nylon caps with grub screw for longendurance.Closing caps: are of PP/NYLON/HDPE materia!.Laser cutting: profiles of 6mm and 4mm thick M.S sheet are used for connectingsubordinates with each other.Rubber: Safety base pads: Anti-skid safety base pads made up superior rubber to preventslippery and damage to floor. Heavy duty 20mm thick rubber pads are placed for restinghandles for noise less operations.Powders Coating: All components are chemically treated to seal exterior and interiorsurfaces against corrosion. The components are electro statically powder coated atminimum 80-100-micron thickness to make it resistant to scratch, corrosion and humidityindual color combination. |
| 13 | MINI SKI and WAIST TWISTERMain Frame: 0114 *3 mm thick M.S pipe and subordinate tube is of 088*3.0 large thicknessM.S pipe.Handle: is made of 088 *3 mm thick Pipe and 025 mm round M.S bright bar in bendingdesign.All remaining frame is made by 088 *3mm thick MS pipe.Weight plates: Rubberized moulding round weight plates are used.Weight Plates Holder with spring lock and spare weights holder: is made by hard chromeplated mild stee!048 D!A pipe open front covered with half round cap and holder end iscovered with heavy quality rubber ring of OD-68 mm and ID-48 mm with 10mm wallthickness for free weight noiseless operations.Bearing: Lubricated high grade6305 `2RS`steel ball bearing.Base plate: is OD166, ID 116, and 6 mm thick.Pins: are made up of M.S bright bar.Bearing bushes: 075mm OD seamless pipe.Weight plate mounting pipe is of 048 mm MS pipe.Seat Frame: made up of hard chrome plated mild steel 48 DIA round pipe.Hardware All hardware`s uses button heads bolts and nuts made up of high tensile steel.Hand grips: Hand grips is used on handles wherever necessary made up of high-qualityrubber and handle ends are covered with aluminum/pp/nylon caps with grub screw for longendurance.Closing caps: are of PP/NYLON/HDPE materia!.Laser cutting: profiles of 6mm and 4mm thick M.S sheet are used for connectingsubordinates with each other.Rubber: Safety base pads: Anti-skid safety base pads made up superior rubber to preventslippery and damage to floor. Heavy duty 20mm thick rubber pads are placed for restinghandles for noise less operations.Powders Coating: All components are chemically treated to seal exterior and interiorsurfaces against corrosion. The components are electro statically powder coated atminimum 80-100-micron thickness to make it resistant to scratch, corrosion and humidity indual color combination. |
| 14 | DOUBLE AIR WALKERMain Frame: 0114 *3 mm thick M.S pipe and subordinate tube is of 088*3.0 large thicknessM.S pipe.Handle: is made of 088 *3 mm thick Pipe and 025 mm round M.S bright bar in bendingdesign.All remaining frame is made by 088 *3mm thick MS pipe.Weight plates: Rubberized moulding round weight plates are used.A. Weight Plates Holder with spring lock and spare weights holder: is made by hard chromeplated mild stee!048 D!A pipe open front covered with half round cap and holder end iscovered with heavy quality rubber ring of OD-68 mm and ID-48 mm with 10mm wallthickness for free weight noiseless operations.Bearing: Lubricated high grade6305 `2RS`steel ball bearing.Base plate: is OD166, ID 116, and 6 mm thick.Pins: are made up of M.S bright bar.Bearing bushes: 075mm OD seamless pipe.Weight plate mounting pipe is of 048 mm MS pipe.Seat Frame: made up of hard chrome plated mild steel 48 DIA round pipe.Hardware All hardware`s uses button heads bolts and nuts made up of high tensile steel.Hand grips: Hand grips is used on handles wherever necessary made up of high-qualityrubber and handle ends are covered with aluminum/pp/nyloncaps with grub screw for longendurance.Closing caps: are of PP/NYLON/HDPE materia!.Laser cutting: profiles of 6mm and 4mm thick M.S sheet are used for connectingsubordinates with each other.Rubber: Safety base pads: Anti-skid safety base pads made up superior rubber to preventslippery and damage to floor. Heavy duty 20mm thick rubber pads are placed for resting |
| 15 | [10.30.1]Providing and laying of chequered precast cement concrete tiles 22 mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). 1. Light shade pigment using white cement [Through Rate] |
| 16 | [6.1.2]Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) [Through Rate] |
| 17 | [6.1.8]Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 8. 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) [Through Rate] Please Enable Macros to View BoQ information |
