|
| 1 | Percentage BoQ BoQ_Ver3.0 Percentage Normal INR Only INR Select, At Par, Excess (+), Less (-) IOCL Tender Inviting Authority: Superintending Engineer, Kanupur Rehabilitation Camps & Building Division, Basudevpur,Dist-Keonjhar Name of Work:- “Construction of Anganwadi Centre with Boundary wall at Birikala R and R Colony for the DPs of village Gobindapur of KIP ”. Contract No: SE, KRC & BD-01/2026-2027 Name of the Bidder/ Bidding Firm / Company : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER# NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # SlNo. Item Description Item Code / Make Quantity Units Estimated Rate inRs. P. Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes inRs. P TOTAL AMOUNT Rs. P. TOTAL AMOUNT In Words |
| 2 | Earth work in excavation of foundation in hard soil including moorum, stoney earth and earth mixed with boulder except sheet rocks and boulders requiring blasting including dressing and leveling the bed upto the required depth and depositing the excavated materials away from the site with all leads and lifts with shoring and shuttering with working pump if required etc. complete and as directed by the Engineer-in-charge. |
| 3 | Filling foundation & plinth with excavated earth with well rammed including all cost of t&p, labour charges etc. complete as per the direction of the Engineer-in-charge. |
| 4 | Supplying and filling in foundation and plinth with sand including watering ramming, cost, conveyance, royality of all materials and cost of labour with T& P required for the work etc. complete (measurement will be taken in finished compacted section only ) and as directed by the Engineer-in-charge. |
| 5 | Cement concrete ( 1:3:6) in foundation and floors (i.e below the base course of terrace flooring using 4 cm size black hard crusher broken granite stone metal (free from weathered skinned & debris etc.) of approved quality including cost and conveyance royalities of all materials and cost of all labour with T& P required for the work complete and as directed by the Engineer-in-charge . |
| 6 | Reinforced cement concrete work of M-20 grade with 20mm & down grade hard granite stone (crusher broken) chips, including hoisting & laying curing with cost,conveyance ,royalty of all materials ,labour ,T& P etc complete and as per the direction of the Engineer-in-Charge. |
| 7 | Rigid & smooth centering and shuttering for R.C.C/C.C.works including falseworks and dismentaling then after casting including cost of materials etc.complete.including all cost, conveyance of all materials and cost of labour with T&P required for the work etc. complete and as directed by the Engineer-in-charge.a) Foundation footing and column base & plinth beam. |
| 8 | b) Column & beam |
| 9 | c) Lintel |
| 10 | d)Chhaja, Roof slab & shelves. |
| 11 | Providing F.A. Brick masonry in C.M. (1:6) using F.A. bricks of approved quality having crushing strength not less than 75 kg/cm2 in including all costs, conveyance, royalty of all materials and cost of all labour with T & P required for the work and with all leads, lifts & delifts including watering, curing & scaffolding etc. all complete as per per drawing & specification and as directed by the Engineer-in-charge.a) Foundation and plinth |
| 12 | b) Super structure |
| 13 | 12mm (1/2\\") thick cement plaster ( 1:6) finished smooth to outside smooth surface of brick walls after rackingout the joints including watering and curing etc. scaffolding if requiredetc. complete with cost, conveyance, royalities of all materials with cost of all labour with T&P required for the work etc. complete as directed by Engineer-in-charge.A) Ground Floor |
| 14 | 16mm thick C.P (1:6)in all floors finished smooth to inside rough surface of brick walls with scafolding after racking out the joints including watering,curing cost ,conveyance, royalities of all materials and cost of all labour T&P required for the work complete in all respect and as directed by the Engineer-in-charge. A) Ground Floor |
| 15 | 6mm thick cement plaster ( 1:4) finished smooth to R.C.Csurface or ceiling including watering and curing etc. scaffolding if requiredetc. complete with cost, conveyance, royalities of all materials with cost of all labour with T&P required for the work etc. complete as directed by Engineer-in-charge.A) Ground Floor |
| 16 | Providing 2.5 cm thick grading concrete (1:2:2) on roof slab with 6 mm size crusher broken granite chips (free from weathered skin and debris etc.) on new works including watering and curing including cost, conveyance, royalty of all the materials and labour etc. complete as per the direction of the Engineer-in-Charge.in Ground floor |
| 17 | Providing and Fixing vitrified tiles in floors on 20mm thick bed of cement mortar 1:4(1cement :4sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including all cost,conveyance, royalty and labour etc complete and as per the direction of the Engineer -in-charage. |
| 18 | Providing and fixing vitrified tiles in dados,skriting and raisers of steps on 12mm thick cement plaster in cement mortar (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including all cost,conveyance, royalty and labour etc complete and as per the direction of the Engineer -in-charage. |
| 19 | Painting two coat with weather coat over one coat of primer including cost,coveyance,royality & T& P materials labour etc.complete as per the direction of the Engineer in charge. |
| 20 | Painting two coat with Distemper over one coat of wall primer including cost,coveyance,royality & T& P materials labour etc.complete as per the direction of the Engineer in charge. |
| 21 | Cutting , straightening, coiled or bent up M.S Rod or Tor steel bending, binding welding and joinging if necessary and tying the grills and placing in position as required for RCC work and providing fan hooks hoisting lowering and including cost, conveyance of M.S rods or tor steel and binding wire of 18 to 20 gause required for the work for bending, binding and tying the grills (payment will be made on weight of M.S Rod or Tor steel only and no separate payment will be made towards the weight of binding wire) etc. complete as directed by the Engineer-in-charge .a) Ground floor |
| 22 | MS panelled window double leaved shutter with MS frame & Grill over all size including frame made out of following materials cnforming to relevant ISS Frame-35x35x6mm MS Angle, Shutter style -Top & Bottom rail 25x25x3mm MS Angle, Window pannel-1.00mm CR Sheet , panel stiffener covering width of each leaf:- 19x5mm, MS Flat 2 nos on each leaf, Hinges size :-100mm-4nos (2nos in each side) brought out as per ISS . Hold fast :-35x35x6mm MS Angle 100mm lengh bifurcated lip 2nos on each side,Handle-19x5mm MS Flat 2nos Fabricated (inside)Tower bolt-4nos brought out as per ISS Horizontal Grills 12 mm MS Round at 100mm spacing. |
| 23 | Ms panelled Door single leaved shutter with MS Frame over all size including frame made out of following materials conforming to relevent ISS.Frame -30x30x5mm MS Angle, Shutter style:- Top & Bottom rail 25x25x3 mm MS angle.Door panel-1.00mm CR sheet, Panel stiffener covering width of each leaf:- 19x5 mm,MS Flat 3 nos on each leaf, Hinges size:-100mm -3nos,(3 nos on each side )bought out as per ISS. Hold fast:- 30x30x5mm MS Angle 150mm lengh bifurcated lip 3 nos. on each side.Handle -19x5mm MS Flat fabricated 2 nos, Aldrop:- 2 nos brought out as per ISS. Tower bolt:- 2 nos brought out as per ISS, |
| 24 | Labour for fixing and fitting as M.S. doors and windows in proper position and making necessary repair to damage surface including cost, conveyance,royality of all materials with all labour etc. complete as per direction of the Engineer-in-charge |
| 25 | Providing and fixing in position 50mm, thick precast cement concere jally (1:2:4) hard granite chips including roughening, cleaning, fixing and finishing in cement mortar (1:3) etc., complete |
| 26 | Labour for fixing and fitting as M.S. grill gate and ventilators in proper position and making necessary repair to damage surface including cost, conveyance,royality of all materials with all labour etc. complete as per direction of the Engineer-in-charge |
| 27 | Painting two coats with enamel paint over a coat of red oxide primer to give an even shade including cost of primer, paint & labour and T & P required for the work etc. complete as per the direction of the Engineer-in-Charge. |
| 28 | Supplying all materials, labour, T&P and fitting and fixing UPVC Soil Waste and ventilating pipe of approved quality confirming to IS-1729-1964 or its latest revision to walls with nails, bob pins and wooden plug or laying in trenches excluding earth work in excavation in all kinds of soil and refilling of trenches as per specification.( a )110 mm dia PVC pipe |
| 29 | Supply all materials, labour, T&P and fixing of following size PVC fittings as per specification and direction of the Engineer-in- charge. (a) 110 mm P Trap |
| 30 | (b) 110 mm N Trap |
| 31 | (c) 110 mm single Door junction |
| 32 | (d) 110 mm bend |
| 33 | (e) 110 mm Cowl |
| 34 | Supplying fitting,fixing with all materials, labour T & P and providing and fixing water closet, squatting pan (580x440) (Indian type w.c. pan / orissa pattern squatting pan) duly embeded in cement concrete (1:4:8) using 40 mm chips all chips all complete as per the ph specification and direction of the Engineer-in-charge. |
| 35 | Supplying fitting,fixing with all materials, labour T & P and providing and fixing squatting urinal pan (450x350) all complete as per the ph specification and direction of the Engineer-in-charge. |
| 36 | Providing F.A Brick masonry in C.M. (1:4) using F.A bricks of approved quality having crushing strength not less than 75 kg/cm2 in including all costs, conveyance, royalty of all materials and cost of all labour with T & P required for the work and with all leads, lifts & delifts including watering, curing & scaffolding etc. all complete as per per drawing & specification and as directed by the Engineer-in-charge. (Foundation & Plinth) |
| 37 | Providing honey Comb brick masonry in C.M.(1:4) using F.A bricks of size 25cmx12cmx8cm of approved quality crushing strenghth not less than 75 kg per sqr. cm with dimentional tolerance ± 8% after immersing the brick for six hours in water before use in superstructure including all costs, conveyance, royalty of all materials and cost of all labour with T & P required for the work and with all leads, lifts & delifts including watering, curing & scaffolding etc. all complete as per drawing and specification and as directed by Engineer-in-cahrge |
| 38 | Providing 12mm thick cement plaster in CM (1:4) with cement punning with cost, conveyance,royalty of all materials, curing, labour charges, t.&p. required for the work etc. all complete & as per the direction of the Engineer-In-Charge. |
| 39 | Providing and fixing 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever ) with all fitting and fixtures complete including cutting and making good the walls and floors wherever required complete as per the direction of Engineer-in-charge. |
| 40 | Supplyling &fixing of Stainless steel kitchen sinks of size 600X450X250 of approved quality with M.S. bracket ,C.P. Waste , Waste pipe and cuttilng holes for joint including cost of all materials and carriage etc. complete as per the direction of the Engineer-in-charge. |
| 41 | Supplying all materials , labour T&P and fittings required for fixing of NP or CP Brass or GM fixtures of following sizes , specification and approved quality mentioned below or any equivalent brand with leak proof threaded joints tightened with spun yarn and white zinc or any other method as required as directed including testing and rectification of detects, after testing complete as per direction of Engineer-in-charge. Long body Bibcock (CP) |
| 42 | Angular stop cock (CP) |
| 43 | Concealed stop cock (CP) |
| 44 | Soap Dish Holder(CP) |
| 45 | C.P. Grit 100mm |
| 46 | Sink cock(15mm dia CP Pillar/Sink cock) |
| 47 | Supplying all material, labour , T&P & fitting ,fixing the 25mm Fullway valve. of ISI Mark approved make with including supply of all necessary jointing materials etc. all complete as directed by the Engineer-in-charge. a) 25mm dia Brass Fullway valve. |
| 48 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor PVC pipes conforming to ASTM-D- 1785/89( Sch-80) & pipe fitting of the following nominal bore with clamps including making good the wall or ceiling etc. and complete as per the direction of Engineer in charge. a) 25mm dia |
| 49 | Supplying all materials, labour T&P and fixing Rotational moulded polythylene cylindrical vertical water storage tanks of 1000 ltrs capacity conforming to IS-1270-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, etc. including hoisting upto a height of 5m. above ground level and placing the tank of the required position, conveyance of all materials to work site etc. complete as per specification & direction of Engineer-in-Charge. |
| 50 | Supplying all labour T&P and cutting holes in brick masonry wall in for taking pipes through and mending good the damages with supply of all required materials etc. complete as per the direction of the Engineer-in-charge. |
| 51 | Supplying all labour T&P and materials and making grooves in brick walls vertically and horizontally to the required depth and width for fixing pipes & fittings of sizes 15mm dia to 25mm dia in the grooves, testing the pipe line against leakage,and filling the grooves with cement mortar(1:4) to bring the surface to original level including cost of mortars, curing and conveyance of materials etc. complete as per direction of the Engineer-in-charge Total in Figures 2725605.95 2725605.95 INR Twenty Seven Lakh Twenty Five Thousand Six Hundred & Five and Paise Ninety Five Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 INR Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
