|
| 1 | Dismantling of plain or corrougated steel sheeting any guage thickness including Nantinal or similar pattern roof covering, complete all as specified and as directed by Engineer-in-charge. |
| 2 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated or semi-corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws or J hooks, complete all as specified and as directed by Engineer-in-charge. |
| 3 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws or J hooks, complete all as specified and as directed by Engineer-in-charge. |
| 4 | Dismantling of wall and ceiling boards (fiber, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as per specified and as directed by Engineer-in-charge. |
| 5 | S&F Aluminium snap grid frame work for false ceiling size of grid 605 x 605 mm, complete all as per specified and as directed by Engineer-in-charge. |
| 6 | S&F 4mm thick non-asbestos fibre cement building boards fixed or laid/ inserted to timber / GI / Aluminium framework with screws cement plain building boards, fixed to timber frame work with screws as in ceiling, complete all as per specified and as directed by Engineer-in-charge. |
| 7 | M&L for two coats of french polishing on surfaces of any description width or girth including cleaning and preparing the surfaces incl a coat of wood filler on old works , complete all as specified and as directed by Engineer-in-charge. |
| 8 | Hacking out old broken glass (any thickness, size, quality or description) exc. 1.5 sqm from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and as directed by Engineer-in-charge. |
| 9 | S&F 3.00mm thick sheet glass of ordinary quality and glazing with oil putty and wooden beads in square n.exe 0.50sqm in each pane, complete all as specified and as directed by Engineer-in-charge. |
| 10 | All as per serial item No. 09 but sheet glass is ground or obscured or frosted, on one side. |
| 11 | Demolition of plain cement concrete of any description not exc. 15 cm thick (below or above ground level), complete all as specified and as directed by Engineer-in-charge. |
| 12 | M&L 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in flooring/ hard standing/pavings/plinth protections, finished even and smooth without using extra cement complete all as per specified and as directed by Engineer-in-charge. |
| 13 | M&L 40 mm thick cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) as in floors, finished even and smooth without using extra cement, complete all as per specified and as directed by Engineer-in-charge. Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ. |
| 14 | Dismantling boarding, any description fixed in any position with nails, complete all as specified and as directed by Engineer-in-charge. |
| 15 | S&F 40mm thick 2nd class hardwood boarding in floor planed one side with butt joints and fixed with nails, complete all as specified and as directed by Engineer-in-charge. |
| 16 | S&F 20mm thick 2nd class hardwood planed one side with butt joints as in shelves of cupboards, racks and pelmets, eaves board and skirting work fixed with nails, complete all as specified and as directed by Engineer-in-charge. |
| 17 | Dismantling Unframed timber scantlings 40 Sqcm and over in section and in any position, complete all as specified and as directed by Engineer-in-charge. |
| 18 | M&L 2nd class HW scantlings clean sawn in timber fixed work, complete all as specified and as directed by Engineer-in-charge. |
| 19 | M&L preparation of wood and wood based materials, new or old surface of any description and girth not otherwise described and treated with two coats of creosote oil, complete all as specified and as directed by Engineer-in-charge. |
| 20 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as per specified and as directed by Engineer-in-charge. |
| 21 | M&L for providing non skid ceramic joint free tiles (coloured) 7 to 8 mm thick (square/rectangular) area of each tile exc. 0.11 but not exc. 0.18 Sqm as in floor set and joint in cement slurry, jointed & pointed in white or coloured cement to match the surface of the tile over 15 mm thick screed bed or bedding layers in CM 1:6 complete all as per specified and as directed by Engineer-in-charge. |
| 22 | M&L for providing glazed ceramic coloured tiles of size 350 x 250 / 450 x 350 mm (6 to 8 mm thick) as in vertical surface set in cement slurry jointed & pointed in white or coloured cement to match the surface of tile over backing coat of 10 mm thick in CM 1:3, complete all as per specified and as directed by Engineer-in-charge. |
| 23 | S&F non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floor, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over 15 mm thick screed bed or bedding layers in CM 1:6 complete all as per specified and as directed by Engineer-in-charge. |
| 24 | S&F non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in skirting/dado, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over 10 mm thick screed bed or bedding layers in CM 1:4 complete all as per specified and as directed by Engineer-in-charge. |
| 25 | M&L for 20 mm thick granite (of any type) tiles, machine cut, bedded & jointed with grey cement slurry & pointed with white cement with admixture of pigmint to match the shade of granite stone including griding & polishing, laid over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6, complete all as per specified and as directed by Engineer-in-charge. |
| 26 | Taking out old existing galvanised iron water mains 15 mm bore (including all fittings) with spigot and socket ends and fittings for re-use in the work and removing unserviceable pipes and fittings from site complete all as per specified and as directed by Engineer-in-charge. |
| 27 | Taking out old existing galvanised iron water mains 20 mm bore (including all fittings) with spigot and socket ends and fittings for re-use in the work and removing unserviceable pipes and fittings from site complete all as per specified and as directed by Engineer-in-charge. |
| 28 | S&F GI tube 15 mm bore medium grade with fittings and fixed complete to wall, ceiling or laid in floor complete all as specified and as directed by Engineer-in-charge. |
| 29 | S&F GI tube 20 mm bore medium grade with fittings and fixed complete to wall, ceiling or laid in floor complete all as specified and as directed by Engineer-in-charge. |
| 30 | Demolition of brick work built in any cement mortar complete all as specified and as directed by Engineer-in-charge. |
| 31 | M&L for brick work with fly ash bricks, straight or curved on plan exc 6m mean radius, built in in CM (1:6), complete all as specified and as directed by Engineer-in-charge. |
| 32 | Taking down cement plaster of any description on brick work/stone work incl raking out joints, hacking for key, scrubbing down with water, complete all as specified and as directed by Engineer-in-charge. |
| 33 | M&L rendering 15 mm thick on fair faces of brickwork in cement mortar 1:6 finished even and smooth without using extra cement, complete all as specified and as directed by Engineer-in-charge. |
| 34 | M&L rendering 15 mm thick on fair faces of brickwork in cement mortar 1:4 on other than fair faces of brick work using WPC @ 3% by weight of cement (WPC to be measured and paid separately) finishing even and smooth without using extra cement, complete all as specified and as directed by Engineer-in-charge. |
| 35 | Supply only integral WPC of approval make/brand confirming to IS code, complete all as specified and as directed by Engineer-in-charge. |
| 36 | M&L for preparation of new plastered or unplastered surface and applying two coats of OBD over a coat of wall care putty (3 mm thick ) and a coat of chalk whiting primer, complete all as specified and as directed by Engineer-in-charge. |
| 37 | M&L for preparation of new plastered surface of wall & applying two coat of cement based paint over a coat of alkali resistance primer, complete all as specified and as directed by Engineer-in-charge. |
| 38 | M&L for complete removal of existing treatement on plastered or unplastered surfaces of walls including brooming down or steel wire brushing, scrapping down smoke scoot, mould, moss and efflorescent salt, trading oil and greasy spots and applying two coats of distemper oil emulsion paint over a coat of wall care putty (1 mm thick) and a coat of chalk whiting primer, complete all as specified and as directed by Engineer-in-charge. |
| 39 | M&L for complete removal of existing treatement on plastered or unplastered surfaces of walls including brooming down or steel wire brushing, scrapping down smoke scoot, mould, moss and efflorescent salt, trading oil and greasy spots and applying two coats of distemper oil emulsion paint over a coat of chalk whiting primer, complete all as specified and as directed by Engineer-in-charge. |
| 40 | M&L for complete removal of existing treatement on plastered or unplastered surfaces of walls including brooming down or steel wire brushing, scrapping down smoke scoot, mould, moss and efflorescent salt, trading oil and greasy spots and applying one coat of distemper oil emulsion paint in ceiling, complete all as specified and as directed by Engineer-in-charge. |
| 41 | M&L for preparation of old decorated wooden surfaces of any description over 10cm width or girth & applying one coat of synthetic enamel paint of any tint, complete all as specified and as directed by Engineer-in-charge. |
| 42 | M&L for one coat of synthetic enamel paint to old steel surfaces of any description over 10cm width girth incl preparation of surfaces, complete all as specified and as directed by Engineer-in-charge. |
| 43 | M&L for two coats of synthetic enamel paint over a coat of pink primer to new wooden surfaces of any description over 10 cm width or girth incl preparation of surfaces, complete all as specified and as directed by Engineer-in-charge. |
| 44 | S&F in repair stainless steel kitchen plate rack 0.85mm thick of size 31\\" X 30\\" X 10\\" complete all as per specified and as directed by Engineer-in-charge. |
| 45 | S&F in repair 15 mm bore Wall Mixer with non-telephonic chromium plated cast copper, CP alloy with crutch or butterfly handle screwed for iron pipe or for brass ferrule, complete all as per specified and as directed by Engineer-in-charge. |
| 46 | S&F in repair chromimum plated health faucet shower with CP flexible pipe up 15 mm bore with 1.25 m long Easy Flex tube in chrome finish with wall hook includng making connections and fixed in position, complete all as per specified and as directed by Engineer-in-charge. |
| 47 | S&F in repair Chromium plated fancy type 15 mm bore stop cock/Angle stop cock cast copper alloy, with crutch or butterfly handle, screwed down, high pressure screwed both ends for iron pipe or for unions complete all as specified and as directed by Engineer-in-charge. |
| 48 | S&F in repair 15 mm bore Chromium plated fancy type bib tap, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engineer-in-charge. |
| 49 | S&F in repair pillar taps, 15mm dia cast copper Alloy with capstan heads, chromium plated, fancy type, screwed down, high pressure, with or with out lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as per specified and as directed by Engineer-in-charge. |
| 50 | S&F in repair brass CP Soap dish and fixed to plugs with chromium plated brass screws complete all as per specified and as directed by Engineer-in-charge. |
| 51 | 'S&F in repairs sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420 mm bowl size 410 mm x 330 mm x 160 mm, complete all as per specified and as directed by Engineer-in-charge. |
| 52 | S&F in repair PVC connection 15mm dia size with PTMT nuts of length 450mm, complete all as specified and as directed by Engineer-in-charge. |
| 53 | S&F in repair 600mmX450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooded plugs with chromium plated brass screws and cup washers complete all as per specified and as directed by Engineer-in-charge. |
| 54 | S&F in repair Brass Chromium plated tubular towel rail, 20 mm dia., D Type, 60 cm long between flanges complete all as per specified and as directed by Engineer-in-charge. |
| 55 | S&F in repair 15 mm bore CP basin mixer for mixing hot & cold water with capstin head screwed down high pressure with or with out littered 'H' or 'C' with long screwed shank and fly nuts screwed down for iron pipe, complete all as per specified and as directed by Engineer-in-charge.Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ. Please Enable Macros to View BoQ information |
