|
| 1 | Assembling of Pre-fab PPGI sheet panels/ PPGI & CGI sheet roofing with repair to doors, windows etc complete with MS tube 50x25x3 mm and PPGI sheet 0.5 mm thick with proper nuts & bolts including repairs by welding etc complete & cost of carriage from SASB store to erection site before commencement of Yatra. |
| 2 | Fixing teak wood/hard board for ceiling, partition door and window etc and wall lining of Huts etc complete fixed with required nails and washers etc |
| 3 | Applying priming coat:With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanized iron/steel works |
| 4 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work |
| 5 | Dismantling roofing including ridges, hips, valleys and gutters etc and stacking material within 50 meter lead of G.S. sheet. |
| 6 | Providing and fixing of doors of composite material of approved brand and design of size 4feet x 8feet with locking arrangement complete job |
| 7 | Supply and fixing of Exhausts of 300 mm dia approved brand and design |
| 8 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth 1 meter from cutting edge in All kinds of soil |
| 9 | Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material : All kinds of soil |
| 10 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 11 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand) Quarry |
| 12 | Dry random rubble masonry with hard stone in foundation and plinth: Without bond stone –Nallah |
| 13 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level- 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 14 | Providing, hoisting and fixing up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including setting in position in cement mortar 1:3 (1 cement :3 coarse sand) including the cost of required centering, shuttering and curing but excluding cost of reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 15 | Centering and shuttering including strutting, propping etc. and removal of form forEdges of slabs and breaks in floors and walls Under 20 cm |
| 16 | Suspended floors, roofs, landings etc |
| 17 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level- Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 18 | Supply and fixing of PVC pipes and other fittings items to toilets/baths (Supreme/Prince/Vectus of Pressure 4Kgf/cm² ) including carriages upto site |
| 19 | a) PVC pipes(110mm) |
| 20 | b) PVC bends(110mm) |
| 21 | c) PVC sockets(110mm) |
| 22 | d) PVC Tee(110mm) |
| 23 | Supply & fixing of Hangars of approved design and make |
| 24 | Providing and fixing of non breakable shelve of approved design and brand |
| 25 | Carriage of stones by Head Load for an avg lead of 1 km |
| 26 | 20mm cement plaster finished with a floating coat of neat cement of mix : 1 : 4 ( 1 cement : 4 fine sand) |
| 27 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. completeSize of tile 600x600 mm |
| 28 | Engaging of electrician for repairs/installation of electrification. |
| 29 | a. Electrician1st Class |
| 30 | b. Electrician 2nd Class |
| 31 | Supply of modular wiring and switch boards and lamps of approved brand and make. |
| 32 | 1.50mm² wire (each coil 90m) |
| 33 | 2.50mm² wire (each coil 90m) |
| 34 | 6 Amp Modular switch |
| 35 | PVC pipe 25 mm |
| 36 | PVC bend 25 mm |
| 37 | Angle Holders |
| 38 | 12 Watt LED Lamp |
| 39 | 4 Way Modular Box |
| 40 | 2 Way Modular Box |
| 41 | 1 way Modular Box |
| 42 | Modular Plate |
| 43 | MCB 10 amp |
| 44 | Tape Roll |
| 45 | Concealed light Havells 10 Watt |
| 46 | Heating box with top and switch |
| 47 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 48 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 18.2.1 W.C. pan with ISI marked white solid plastic seat and lid. |
| 49 | Providing and fixing of CP Health Faucet of approved brand and design |
| 50 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 |
| 51 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 52 | Providing and fixing PTMT grating of approved quality and colour.100 mm nominal dia |
| 53 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 1500x450 mm |
| 54 | Providing and fixing Monolithic Washbasin (one piece ) of approved brand with PTMT pillar cock and all fittings |
| 55 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.PN-16 pipe, 20mm OD(SDR-7.4) |
| 56 | Carriage of Cement by MT from Ganderbal to Dumail |
| 57 | Carriage of cement and other material by head load from dumping site at Panjtarni store/ to Site of execution at Panjtarni including loading of cement at Baltal store and unloading of the same at Panjtarni |
| 58 | Carriage of sand and bajri by head load for an avg lead of 2 kms Please Enable Macros to View BoQ information |
