|
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth All kinds of soil |
| 2 | Providing and laying in position cement concrete of specified grade including curing excluding cost of centring and shuttering all works up to plinth level.1:4:8(1 cement :4 coarse sand : 8 graded stone aggregate 40 mm nominal size) nallah stone |
| 3 | Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level . 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 4 | Providing and fixing PUF insulated sandwich panels for walls and roofing of total thickness not less than 50 mm. Panel shall have 0.5 mm thick precoated GI sheet on both side of Polyurethane foam confirming to IS 12436: 1988. The PPGI sheet should have plastic protective guard film of minimum 25 microns to avoid scratches while transportation. The PU foam shall be self-extinguishing, fire retardant. Also all joints of roofing would be fill with silicon. The panel should be fixed in 1.2 mm thick U-section of size 40x52x40mm over all sides with proper riveting having spacing of 500 mm and 100 mm x 2 mm thick MS sheet on every joint of PUF panels of walling & roofing from inner and outer side. |
| 5 | Supply and fixing of door composited with 50mm PUF panel (polyurethane foam conforming to IS 12436:1988 and PPGI sheet conforming. Sheet shall have guard film of 25 micron to avoid scratches during transportation).Doors with frame work of Aluminum anodized channel (profile) of 60mmx40mmx2mm thick including cost of 02 Nos. Anodised Aluminium handles 125 mm, 02 Nos. Anodised Aluminium sliding door bolt 250 x16 mm , 02 Nos. Anodised Aluminium tower bolt (barrel type) 200 x10 mm, 04 Nos. Anodised Aluminium butt hinges 75x45x3.2 mm etc complete. |
| 6 | (Doors of size 1.00mx2.10m) including cost of frame etc complete. |
| 7 | (ii) (Doors of size 0.75mx2.10m) including cost of frame etc complete. |
| 8 | Supply and fixing of sliding Window of size 1.00mx1.00m composited with mild steel ERW pipes for frames of sectional size 65x50x25mm & 65x35x25 mm and 55x40x20 mm for shutter including safety grill on outer side made with 10 mm thick square bar having centre to centre spacing of 10cm on both longitudinal and transverse axis. Window shutter is fixed with 5mm thick poly carbonate glass of density not less than 1.20gm/cm3 including cost of 04 Nos. 100x58x1.90 mm mild steel butt hinges, 02 Nos. 125 mm mild steel handles , 04 Nos. 150x10 mm mild steel tower bolts etc complete |
| 9 | Supply and fixing of Ventilator of size 0.45mx0.60m composited with mild steel ERW pipes for frames of sectional size 65x50x25mm & 65x35x25 mm and 55x40x20 mm for shutter including safety grill on outer side made with 10 mm thick square bar having centre to centre spacing of 10cm on both longitudinal and transverse axis. Window shutter is fixed with 5mm thick poly carbonate glass of density not less than 1.20gm/cm3 including cost of 02 Nos. 100x58x1.90 mm mild steel butt hinges, 125 mm mild steel handles , 02 Nos. 150x10 mm mild steel tower bolts etc complete . |
| 10 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes |
| 11 | Providing and fixing pre-coated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm+/-5% total coated thickness (TCT), Zinc coating 120 gsm as per IS:277 in 240 mpa stee grade 5-7 microns epoxy primer on both sides of the sheet and polyster top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer –in-charge. The sheet shall be fixed using self drilling/ self tapping screws of size (5.5 x 55 mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I limpet washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 12 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 13 | Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) |
| 14 | Providing and fixing one piece white vitreous china pedestal type water closet (European type) with seat and lid , 10 liter flushing cistern and CP flush bend of approved brand and make with overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete,including painting of fittings and brackets, cutting and making good the walls and floors wherever required: including carriage:W.C. pan with ISI marked white solid plastic seat and lid(All Quantities subject to actual measurements at site). |
| 15 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin m |
| 16 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings |
| 17 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. Internal work-exposed on wall with clamps at 1.00 meter spacing PN-16 pipe , 20mm OD(SDR-7.4)(subject to actual measurement at site) |
| 18 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 |
| 19 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 20 | Providing and fixing 1.5sqmm wire coils for electric fitting including all fittings with channel. |
| 21 | Providing and fixing 100mm PVC pipe for sewerage disposal |
| 22 | Providing and fixing PVC panelling 6mm to SP Line rooms and washrooms of approved brand and make including all necessary fittings and accessories including carriage complete.(All Quantities subject to actual measurements at site). |
| 23 | Providing and fixing 25 lt geysers of approved quality and make to bathrooms along with all fittings etc complete job. including carriage |
| 24 | Providing and fixing wall fans of approved quality and make to rooms along with all fittings etc complete job. including carriage. |
| 25 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge. Made of G.I. wire of dia 4 mm |
| 26 | Providing and fixing artificial grass made of plastic along with fitting glues etc. |
| 27 | Carriage of all material by MT to site. Trips of LMV Please Enable Macros to View BoQ information |
