|
| 1 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes |
| 2 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of nuts & bolts.Welded(Make-JINDAL/TATA/SAIL/JSW) |
| 3 | Providing and Fixing of Nuts & Bolts of different sizes |
| 4 | Providing and fixing PUF insulated sandwich panels for walls and roofing of total thickness not less than 50 mm. Panel shall have 0.5 mm thick precoated GI sheet on both side of Polyurethane foam confirming to IS 12436: 1988. The PPGI sheet should have plastic protective guard film of minimum 25 microns to avoid scratches while transportation . The PU foam shall be self-extinguishing, fire retardant. Also all joints of roofing would be fill with silicon. The panel should be fixed in 1.2 mm thick U-section of size 40x52x40mm over all sides with proper riveting having spacing of 500 mm and 100 mm x 2 mm thick MS sheet on every joint of PUF panels of walling & roofing from inner and outer side |
| 5 | Providing and fixing precoated galvanised steel sheet roofing accessories 1 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : (i) Ridges plain (500 - 600mm) |
| 6 | Supply and fixing of door composited with 50mm PUF panel (polyurethane foam conforming to IS 12436:1988 and PPGI sheet conforming. Sheet shall have guard film of 25 micron to avoid scratches during transportation).Doors with frame work of Aluminum anodized channel (profile) of 60mmx40mmx2mm thick including cost of 02 Nos. Anodised Aluminium handles 125 mm, 02 Nos. Anodised Aluminium sliding door bolt 250 x16 mm , 02 Nos. Anodised Aluminium tower bolt (barrel type) 200 x10 mm, 04 Nos. Anodised Aluminium butt hinges 75x45x3.2 mm etc complete |
| 7 | (Doors of size 1.00mx2.10m) including cost of frame etc complete |
| 8 | (ii) (Doors of size 0.75mx2.10m) including cost of frame etc complete |
| 9 | Supply and fixing of Double leaf Window of size 1.00mx1.00m composited with milld steel ERW pipes for frames of sectional size 65x50x25mm & 65x35x25 mm and 55x40x20 mm for shutter including safety grill on outer side made with 10 mm thick square bar having centre to centre spacing of 10cm on both longitudinal and transverse axis. Window shutter is fixed with 5mm thick poly carbonate glass of density not less than 1.20gm/cm3 including cost of 04 Nos. 100x58x1.90 mm mild steel butt hinges, 02 Nos. 125 mm mild steel handles , 04 Nos. 150x10 mm mild steel tower bolts etc complete . |
| 10 | Supply and fixing of Ventilator of size 0.45mx0.60m composited with mild steel ERW pipes for frames of sectional size 65x50x25mm & 65x35x25 mm and 55x40x20 mm for shutter including safety grill on outer side made with 10 mm thick square bar having centre to centre spacing of 10cm on both longitudinal and transverse axis. Window shutter is fixed with 5mm thick poly carbonate glass of density not less than 1.20gm/cm3 including cost of 02 Nos. 100x58x1.90 mm mild steel butt hinges, 125 mm mild steel handles , 02 Nos. 150x10 mm mild steel tower bolts etc complete . |
| 11 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. completeSize of tile 600x600 mm |
| 12 | Providing and fixing of monolithic commodes of approve brand and make in officers room |
| 13 | Providing and fixing of CP Health Faucet of approved brand and design |
| 14 | Providing and fixing of Non breakable PTMT towel rail of approved design and brand |
| 15 | Providing and fixing of non breakable shelve of approved design and brand |
| 16 | Providing & fixing of Monolithic Washbasin (one piece ) of approved brand . |
| 17 | Providing and fixing unplasticized PVC connection pipe with brass unions45 cm length 15 mm nominal bore |
| 18 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 |
| 19 | Providing and fixing PTMT grating of approved quality and colour.100 mm nominal dia |
| 20 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with/ C.P. brass screws and washers complete. |
| 21 | Providing and fixing of soap case of approved brand and design. |
| 22 | Providing and fixing of PTMT towel ring of approved brand & design |
| 23 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 24 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-chargeInternal work-exposed on wall, including fixing the pipe with clamps at 1.00 meter spacing 15mm nominal outer dia pipes |
| 25 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 26 | Carriage of sand and bajri by head load for an avg lead of 2 km. |
| 27 | Carriage of material by MT from Jammu/Srinagar to Dumail |
| 28 | Carriage of material by MT from Ganderbal to Dumail |
| 29 | Carriage of cement and other material by head load from dumping site at HolyCave store to Site of execution at HolyCave including loading of cement at Baltal store and unloading of the same at HolyCave Please Enable Macros to View BoQ information |
