|
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: leadupto 1mtr All kind of soil80% and ordinary rock 20% |
| 2 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 3 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 4 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 5 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete |
| 7 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 8 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts. |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form for: Edges of slabs and breaks in floors and walls ,under 20 cm wide |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms. |
| 14 | 15mm Cement plaster on the rough side of single or half brick wall of mix: 1:6 (1cement :6 fine sand) |
| 15 | 12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) |
| 16 | 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) |
| 17 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. welded |
| 18 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class Kail wood |
| 19 | Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. With 2nd class deodar wood beading 62 x19 mm |
| 20 | Providing and fixing 35mm panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separatly second class kail wood |
| 21 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked 12 mm |
| 22 | Providing & laying vitreified floor tiles in different size ( thichness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS 15622 of approved make in all colours and shades laid on 20 mm thick cement mortar 1:4 ( 1cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. ( size of tile 60 x 60 cm) |
| 23 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etcupto floor V level, including curing but excluding the cost of centring, shuttering and finishing with. 1:5:10 (1 cement : 5 coarse sand : 10 graded brick aggregate 40 mm nominal size |
| 24 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering , all works upto plinth level ( 1 : 2 : 4)1 cement 2 coasre sand 4 stone aggregate grade , with 20mm nominal size . crushed |
| 25 | Providing and fixing precoated galvanised iron profile sheet (size ,shape,and pitch of corrugation as approved by enginner in charge ) 0.50 mm (+0.05%) total coated yhickness with zinc coating 120 gm. per sqm as per IS 277 ,in 240 mpa steel grade ,5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns min. to avoid scratches during transportation and should be supplied in single length upto 12 mt. or as desired by engineer -in-charge .The sheet shall be fixed using self drilling /self tapping screws od size (5.5x55mm) with EPDM seal,complete upto any pitch in horizontal/ verti cal or curved surface, excluding the cost of purlin ,rafter and trusess and including cutting to size and shape wherever reqd. |
| 26 | Providing and fixing precoated galvanised iron profile sheet (size ,shape,and pitch of corrugation as approved by enginner in charge ) 0.50 mm (+0.05%) total coated yhickness with zinc coating 120 gm. per sqm as per IS 277 ,in 240 mpa steel grade ,5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling / self tapping screw complete Ridge plain (500-600mm) |
| 27 | Providing and fixing hard board celing sheet of approved quality with neccesary nails etc. complete 4.5 mm thick ( frame work paid separately) including side corner |
| 28 | Providing wood work in frames of false ceiling, partitions etc sawn and fixed in position (budloo/ fir wood) |
| 29 | Applying priming coat with ready mixed pink or grey primer including acrylic putty of approved brand and manufactures on wood work (hard and soft wood) |
| 30 | Painting of doors and windows with ready mixed synthetic enamel paint of approved brand and manufacturers in all shades (two or more coats) on new work |
| 31 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade (two or more coat ) over and including priming coat with cement primer |
| 32 | Finishing wall with acrylic smooth exterior paint of requried shade on new work two oor more coat [email protected] liter/ 10 sqm over and including priming coat of exterior primer applied @2.20 kg/ 10 sqm |
| 33 | Providing and fixing lSI marked oxidised M.S. sliding doorbolts with nuts and screws etc. complete :250x16 mm |
| 34 | Providing and Fxing aluminium tower bolt ISI marked anodized (anodic coating not less than grade AC as per IS 1868)transparent or dyed to required colouur or shade with necessary screws etc. complete 100 X 10 MM |
| 35 | Providing and Fxing aluminium handle ISI marked anodized (anodic coating not less than grade AC as per IS 1868)transparent or dyed to required colouur or shade with necessary screws etc. complete 100 mm |
| 36 | Providing and fixing rectified Floor tiles 300x300 mm non skidtile (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITC.O, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coa.rse sand) including pointing the joints with white cement and matching pigment etc., complete. |
| 37 | Carriage of Sand by mechanical transport including loading , unloading & stacking complete lead upto 75 km and manual labour lead upto 300 mt |
| 38 | Carriage of stone aggregate below 40 mm nominal size by mechanical transport including loading, unloading & stacking complete lead upto 20 km and manual labour lead upto 300 mt |
| 39 | Carriage of bricks by mechanical transport including loading, unloading & stacking complete lead upto 94 km and manual labour lead upto 300 mt . |
| 40 | Wiring for light points/fan/ ehaust fan poits/ call bell point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface/ resessed mrdium class PVC conduit with modular switch, modular plate, suitable gi bo and arthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable etc. as reqd. Group C Please Enable Macros to View BoQ information |
