|
| 1 | Item No.1 : Excavation in all kinds of Soils & Soft murum including boulders up to 0.6 m dia.(0.113 cum) for canal,seating of embankment,filter drains / catch water drains etc. and placing the excavated stuff neatly in dump area or for formation of service road/embankment as directed including cost of all materials,machinery,labour,dressing bed & sides to required level and profile etc.complete with lead up to 15 m and all lifts as directed.. |
| 2 | Item No.2 : Exvavation in Hard Murum including boulders up to 0.6 m dia.(0.113 cum) for canal,seating of embankment,filter drains / catch water drains etc. and placing the excavated stuff neatly in dump area or for formation of service road as directed including cost of all materials,machinery,labour,dressing bed & sides to required level and profile etc.complete with lead up to 15 m and all lifts as directed.. |
| 3 | Item No.3 : Excavation in Soft Rock without blasting including boulders up to 0.6 m diameter (0.113 cum) for canal, seating of embankment, filter drain / catch water drains etc., and placing the excavated soft rock neatly in dump area or for formation of service road as directed including cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc., complete with lead up to 15 m and all lifts as directed. |
| 4 | Item No.4 : Excavation in hard rock of all toughness by blasting including boulders above 0.6 m dia. (0.113Cum) minimizing damage to side slopes of excavation in water prism area by adopting any one or combination of line drilling /pre-splitting /smooth blasting techniques and placing the excavated rock neatly in approved dump area including cost of all materials, machinery, labour, leveling bed etc., complete with lead up to 15 m and all lifts as directed. |
| 5 | Item No. 5 :- Providing & fixing anchor bar of 25 mm daimeter and 3.375 m length with resin bond cement capsul anchorage through adit/itself including drilling holes, inserting grout capsule, driving anchor, cost of all materials, machinery, labour , ventilation, lightening, drainage and all other ancillary operations etc complete with all lifts. |
| 6 | Item No.6 : Providing & fixing in position TMT -FE-500 bar reinforcement of various diameter for RCC Pile caps, footing, foundation, slab, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawing and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete as directed. |
| 7 | Item No.7 :- Providing and laying in situ cement concrete of grade M-15 of trap / granite / gneiss / quartzite / graded metal for PCC with or without surface reinforcement/RCC concreting requiring heavy or special type of shuttering for works of gallery, sluice, spillway crest, spillway downstream face, energy dissipating structures, intake structures, training walls, piers, abutments etc. with Concrete Mixer with shuttering and scaffolding, placing, compacting, curing with an initial lead of 1 km and all lifts etc. complete as directed.(B) M-15 (40 MSA) (Cement 5.20 bags/Cum) |
| 8 | Item No.8 :- Providing and laying in situ cement concrete of grade M-20 of trap / granite / gneiss / quartzite / graded metal for RCC works of gallery, sluice, spillway crest, spillway downstream face, energy dissipating structures, intake structures, training walls, piers, abutments, slab etc. with Concrete Mixer including shuttering and scaffolding, placing, compacting, curing with an initial lead of 1 km and all lifts etc. complete as directed. |
| 9 | Item No.9 :- Providing and fixing ISMC 100*130*6 mm. As per design and drawing with fixing necessary holdfast cutting, bending ,welding etc. complete with all leads and lifts.( This type of channel is not available in market, hence M. S. angle 100*65*6 mm) |
| 10 | Item No.10 :- Straight Needle K.T.Weir Gate- Manufacturing- Manufacturing with QAP & fabrication of KT weir needle gates - straight type size 2.15 x 0.5M- 94 Kg. weight as per relevant Indian Standards with all material, Mild steel confirming to IS 2062, Rubber seal confirming to IS 4623 & Welding electrodes AWS E6013 for general weld joints. It includes all materials, Labour charges, machinery charges, 1km lead charges of transportation, loading and unloading charges of Gate parts at Site, Inspection & Quality control charges, Sand blasting, Painting with one coat of Zinc rich primer on dry film to give total dry film thickness 70 +/- 5 microns and 2 coats of sloventless coal tar epoxy paint applied to give minimum dry film thickness of 150+/- 5 micron per coat as per IS 14177. |
| 11 | Item No.11 :- Fixing of M.S. Needles in weir openings after offset of the monsoon for storage of Water from post monsoon river flow and making it water tight by using wooden pegs, Dungry cloth & empty cement bags etc. with all leads & lifts and including all material and labour etc. complete as directed. (For 07 Nos.) |
| 12 | Item No.12 :- Providing and laying expansion / construction joint with shalitex super expansion pad (jute fiber) 12 mm thick including sealing the joint with shalitex sealing compound etc. complete asdirected.(For all slab thickness). |
| 13 | Item No.13 :- Providing and fixing RCC Boundary / Guard / Chain age blocks of size 75 x 20 x 20 cm including excavation and fixing in a block of 45 x 45 x45 cm in M-15 Concrete with oil painting of two coats, lettering etc. complete as directed.(height of stone above GL 40 cm.) |
| 14 | Item No.14 :- Laboratory testing charges for various materials required for items of work, on the basis of testing frequency and charges fixed by Vigilence and Quality Control Circle, Pune.Item / Page No : 4 / 0Additional Specifications : 1. The amount of laboratory testing charges will be paid to contractor only after submission of the original receipt from the Vigillence and Quality Control Office with the name of work mensioned on it. 2. Above / below percentage quoted by the contractor will not be applicable for this item.Compressive Strength of Cement Mortar 1 Test per Day |
| 15 | Item No. 8 :- Providing and fixing canal information board of 1.2 x 0.75 m prepared on 16 gauge M.S. sheet with angle iron frame of size 35 x 35 x 3 mm with cross bracing of size 25 x 25 x 3 mm including painting with one coat of zinc chromate storing primer and two coats each of green/white back ground and back side grey store enameled bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows coated with non peal able crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50x50x5 mm of 3.65 m long inflated at bottom drilled on top and painted in white and black bonds of 30 cm with four numbers high strength of G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete in M-15 block of size 60 x 60 x 75 cm as directed by Engineer-in-Charge. |
| 16 | Royalty charges for various building construction bonafied materials which are used for government bonafied works and for which Royalty charges are to be paid by the contractor. (This Item is to be paid to the contractor only after he pays the Royalty amount to Revenue department and produces the required voucher.)Item / Page No : 3 / 0 A) Sand (212.01+21.20+4.24)=237.45 |
| 17 | B) Metal/Murum/Stone Please Enable Macros to View BoQ information |
