|
| 1 | Item No :- 1 Site Clearence including cutting of grass, small trees, including depositing the material as and where directed with all lead and lift etc complete |
| 2 | Item No 2:-Excavation in all kind of soil,soft murum including boulders upto 0.6 m diameter for canel, seating of embakment, filter belt, catch water drains etc and placing the excavated stuff neatly in dump area etc complete Lead Upto 15.00 m and 6.0 m lift |
| 3 | Item No 3:- Excavation in Hard murum including boulders upto 0.6 m diameter for canel, seating of embakment, filter belt, catch water drains etc and placing the excavated stuff neatly in dump area etc complete Lead Upto 15.00 m and 6.0 m lift |
| 4 | Item No 4:- Providing and fixing Anchore Bar of 25mm Dia. 3.375m Lenght, holes anchoring in rock as directed and fixing 25mm dia. steel anchore including drilling hole, cleaning holes, fixing arrangement, etc com. as per standerd specifications and as directed by the Engineer in Charge. |
| 5 | Item No 5:- Providing and laying in Situ CC 1:2:4 M-15 (40 MSA) for trap/granite/graded material including curing vibrating etcc complete with all lead and lifts (For Piers & body weir) |
| 6 | Item No 6:- Providing and laying in Situ CC 1:2:4 M-15 (20 MSA) for trap/granite/graded material including curing vibrating etcc complete with all lead and lifts (For Piers & body weir) |
| 7 | Item No 7:- Providing and fixing in position mild steel / HYSD bar rainforcement of verious dia for RCC pile caps footing, foundation, slab, beams, coloumns canopies chhaja , lentels, copings as per detail drawing and sheduled including cutting bending, hooking the bar binding with wires, tack welding & supporting as required as per spcification etc complete A) For Raft and TEMP. steel @ 5kg/sqm |
| 8 | Item No 8:- Providing and fixing ISLC of size 150x100 x5.00 mm grooved channels for lowering steel needles with sufficient hold fasts with 20 mm. Bars & fixing on position with necessary tack welding & supporting including one coat of anticorrovsive paint & two coats of oil paints of approved quality & shade etc complete |
| 9 | Item No 9:-Providing and fixing in position Mild Steel fabricated STRAIGHT Needles of size 2.15 x 0.50 Mtr. In rolled steel plate of 4 mm thick with stiffeners & structural sections like channels angles, tees including cutting , fabricating, welding , finishing with base coats of iron oxidized and painting with three coats with one coat of anticorrosive paint including provideing and fixing best quality of rubber seals of approved quality and of standerd size, thckiness as per detailed desing and drawing, weighing 63.26 kg/Sqm with all lead and lfits including testing at site etc complete as per specification and directed by Engineer - In- Charge |
| 10 | Item No 10:- Providing back filling in trenches behind aboutment, piers, wing walls, key walls, body walls etc with approved hearting material from borrow including laying in layers, spreading, breaking clods , watering and compaction manually with all leads and lfts etc complete |
| 11 | Item No 11:- Providing and Constructing 230 mm thick dry rubble stone pitching using stones and stone chips from locally available etc complete with lead up to 50.0 m and lift excluding royalty of material as directed by Engineer -In-Charge |
| 12 | tem No 12:- Providing and fixing informatory & sign board in square or rectangular shape of any size made out 16 guage ( 1.6 mm) thick steel sheet painted with one coat of zinc chromate stoving primer and two coat green back ground while border / messages symboles etc and back side in grey stove enamel paint including M.S. angle iron post of size 35 mm x 35mm x3 mm and two MS angle iron post of size 50 mm x 50 mm x5 mm 3.65 m long properly cross braced with angle iron of size 50 mm x50mmx5 mm duly painted with including G.I. fixtures etc and fixing the board in 1:4:8 concrete block of size 60 cm x 60cm x75 cm including transporation etc complete. The nut bolts of board with angle iron post / supporting structure after fixing at site has to be electrically welded, retroreflective sheeting should be with five years writen warrently from the etc complete Please Enable Macros to View BoQ information |
