|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : Garrison Engineer Kapurthala Name of Work : Certain repairs in Bde Offr Mess Complex in Old Mil Station Kapurthala, Golden Stable Mil Stn Kapurthala under GE Kapurthala Contract No : GE KPT- /2026-27 Bidder Name : SCHEDULE OF WORKS(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # S.No Description of work Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Taking down cement plaster on brick work or concrete surfaces incl racking out joints all as specified. |
| 3 | M&L for 10 mm thick rendering on brick work or concrete surfaces in cement mortar 1:6 to receive tiles complete all as specified and as directed. |
| 4 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) |
| 5 | M&L for glazed ceramic coloured tiles in vertical surface 300 x 450 x 7mm thick set and jointed in neat cement slurry pointed in white or colour cement to match the colour tiles complete all as specified and directed by Engineer-in-Charge. |
| 6 | M&L for 25mm thick cement concrete type B-1 1:2:4 (20mm garaded agg) as in sub base under tiles all as specified and directed by Engr-in-charge. |
| 7 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11sqm but n.exc 0.18 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles including 15 mm thick cement screed bed in cement mortar (1:6) and including dismantling of tiles complete all as specified and directed by Engineer-in-Charge. |
| 8 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18sqm but n.exc 0.38 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles including 15 mm thick cement screed bed in cement mortar (1:6) and including dismantling of tiles complete all as specified and directed by Engineer-in-Charge. |
| 9 | M&L for vitrified ceramic tile non skid coloured tiles 10mm thick (square/rectangular) polished area of each tile exceeding 0.42 sqm but n.exc 0.1.00 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles including 15 mm thick cement screed bed in cement mortar (1:6) and including dismantling of tiles complete all as specified and directed by Engineer-in-Charge. |
| 10 | Taking down GI tubing & connection 15mm dia laid in floor / trenches or fixed to walls complete all as specified and directed by Engineer-in-Charge. |
| 11 | S&F of CPVC pipe of outer dia 16mm SDR 11 & Plain CPVC SDR 11 fittings / adhesive(solution) on walls/ceiling or laying in floor complete all as specified and directed by Engr-in-charge. |
| 12 | Taking down GI tubing & connection 20mm dia laid in floor / trenches or fixed to walls complete all as specified and directed by Engineer-in-Charge. |
| 13 | Supply & laying CPVC pipe of outer dia 20 mm SDR 11 and plain CPVC SDR 11 fittings / adhesive(Solution) on walls/ceiling or laying in floor complete all as specified and directed by Engr-in-charge. |
| 14 | S&F in repairs 15 mm bore CP bib taps fancy type cast copper alloy long body with crutch or butter fly handle screwed down for iron pipe or for brass ferrule and fixed complete. |
| 15 | S&F in repairs 15mm dia stop valve, CP cast copper alloy with crutch or butterfly handle. Screwed down high pressure, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 16 | S&F in repairs fancy type chromium plated stop valves with long shank and cup (concealed type) cast copper alloy screweddown high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed for bore fo size 15mm. |
| 17 | S&F in repairs 15mm angle valve fancy type of CP cast copper alloy , with capstan heads, chromium plated, screwed down high pressure, screwed for iron pipe and fixed. |
| 18 | S&F of powder coated anodised aluminium frame (minimum thickness of powder coating 50 microns) for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 19 | S&F of powder coated Anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. (minimum thickness of powder coating 50 microns). complete all as specified |
| 20 | S&F of powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (2 no.) (minimum thickness of powder coating 50 microns). complete all as specified |
| 21 | S&F 5.50mm thick plain sheet glass, one side sheet glass is groundor obscured or frosted in squares exc 0.5 sqm each pane and glazing with metal beads all as specified. |
| 22 | S&F of factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made |
| 23 | S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised, overall length of cover plate 140 mm , with hard drawn steel spring, fixed in floor |
| 24 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation board/slabs/blankets/AC boards etc any thickness . |
| 25 | S&F in position suspended false ceiling system using E-grid suspended ceiling grid system . The size of grid shall be 600x600mm with GI frame work main runner 38x24mm cross tee 25x24mm and wall angle 24mmx24mm using 9mm thick ceiling panel laminated wth PVC film on front face and foil back available in due drop texture as per IS- 2095 Part-I 1996 fixed in the grid of E grid suspended ceiling Grid system duly suspended by 4mm dig GI bar hangers from the purlins of the roof with butter fly clips all as specified. |
| 26 | S&F of PVC hollow wall & roof (as in false ceiling) panelling consisting of PVC profile 250mm wide and 6mm thick reinforced with PVC linining 10mm C/c with interlocking arrangement fixed to wall with PVC rowl plugs and steel screws 40cm C/C vertically by drilling holes fixing to walls of reqd height fixed with PVC cassing and capping for top and corner portion of panneling fixed complete all as specified and as directed by Engineer-in-Charge. |
| 27 | S&F of 12 mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required |
| 28 | S&F in repairs 15mm dia pillar taps fancy type long neck of cast copper alloy , with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed or iron pipe and fixed. |
| 29 | M&L for stainless steel curtain rod of 25mm dia, having wall thickness 1mm, with brackets fixed to wall with screws, gutties @ 1500mm C/C (approx) and curtain rings (Minimum 5 Nos rings per running mtr of curtain rod) including taking out the existing old pelmet box along with old curtain rods and removing complete, all as directed by EIC |
| 30 | S&F in repairs hand shower/ health fauset (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25mm metre long flexible tube and ABS wall hook including making corrections and fixed in position complete all as specified and directed by Eng-In-Charge.. |
| 31 | S&F of brass CP wall mixer shawer set for mixing of hot & cold water screwed down for iron pipe and fixed complete all as specified and directedby the Engr-in-charge. |
| 32 | S&F of brass CP sink mixer wall mounted for mixing of hot & cold water screwed down for iron pipe and fixed complete all as specified and directedby the Engr-in-charge. |
| 33 | S&F of sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12mm wide with chromium plated bracket guard and railing 60cm long all as specified and directed by Engr-in-charge. |
| 34 | S&F of repairs vitreous china urinal full stall type, white including connections to flushing pipe and outgoing pipes fixed all as specified and directed by Engr-in-charge. |
| 35 | Dismantling of brick tiles or terracing tiles laid bedded and pointed in cement mortar in single layer on roofs . |
| 36 | M&L for 40 mm thick cement concrete type B0, 1:2:4 (using 12.5 mm graded stone aggregate) as in PCC padding over roof slab complete all complete all as specified. |
| 37 | M&L for rendering 10mm thick cement mortar 1:3 on concrete surface even and smooth with waterproofing compoundNote :- WPC to be measured and paid seprately |
| 38 | Preparation of newly plastered surfaces making surface completely dry and applying a coat of bitumen primer @ 0.40 ltr/sqm and after drying of primer apply APP modified water proofing membrane with non woven polyster reinforcement 3mm thick superior multipolymeric weighing not less than 3kg/sqm with properties of high penetration and centre core consisting of 90 micron high molecular high density polyethylene (MHHDPE) film consisting of five layers with a coat of hot blown bitumen 85/25 @ 1.20 kg/sqm under and over the APP membrane laid with torching application to the surface complete and sealing the side as well as end laps (overlaps should not be less than 10 cm) complete all as specified and directed. |
| 39 | M&L for 40mm thick brick tiles bedded in cement mortar 1:4, 15mm thick as on roof over APP all as specified and directed by Engr-inp-charge. |
| 40 | - ditto all as per above item No. 38 but except tiles including clean from mortar complete all as specified and directed. |
| 41 | Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 all as specified and directed by Engr-in-charge. |
| 42 | M&L for cement concrete type B0 1:2:4 (12.5mm graded aggregate) in roof kerbs, rounded or chamfered edges complete all as specified . |
| 43 | Dismantiling water tank PVC 500 Ltrs and removing from site |
| 44 | Dismantiling water tank PVC 1000 Ltrs and removing from site |
| 45 | S&F of rotational moulded polythelene water storage tanks cylindircal water tank for hoisted and fixed in postion of 500 ltrs capcity incl fittings and as directed by Engr-in-Charge |
| 46 | S&F of rotational moulded polythelene water storage tanks cylindircal water tank for hoisted and fixed in postion of 1000 ltrs capcity incl fittings and as directed by Engr-in-Charge |
| 47 | S&F in repairs CP greating round 75/100mm size (minium weight 50 gms) complete all as specified and directed. |
| 48 | S&F of 600x450 mm size and 5.5mm thick looking mirror, bevelled edge of selected quality glass with aluminium frame made of channel alround,mounted on 6 mm thick commercial ply or AC building board, fitted to wooden plug with CP screws. |
| 49 | Cutting chases pinning in brick/stone/blocks masonary in making good to facings where required and pointing in cement mortar (1:3) to ends or eges of steps, cills, sun shades, shelves, lintel etc and cutting chases for concealed water tubing or etc and making good, |
| 50 | S&F of gunmetal globe and gate valve with iron welded hand secrewed both and for iron pipe 20mm fixed in repairs. |
| 51 | Taking down chowkats or framed with shutter (with out taking off shutters from the frame) area exc 1.50 sqm but n.exc 4 sqm each. |
| 52 | S&F of factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardantand fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugsor SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 53 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 54 | Providing and fixing stainless steel (SS-304 grade) friction hinges (Size 250x19x1.99mm ) to the side/top hung WPC Doors/ windows, of approved quality, with necessary stainless steel screws etc. as directed by Engr-in-charge. |
| 55 | Providing and fixing steel (white power coated) crescent lock for uPVC sliding window/ door with necessary screws etc. complete all as specified and directed |
| 56 | S&F of brass 4 levers Mortice lock, vertical type, size 100 mm for WPC Door all as specified and directed. |
| 57 | S&F of 375mm length brass skeleton tower bolts with cast brass plate and staples and rolled or drawn brass bolt and fixed Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
