|
| 1 | Demolition of cement concrete (unreinforced ) in floors and pavings n. exc 15cm thickness (above or below GL) complete all as specified and directed. |
| 2 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 3 | Dismantling floor, hearth or wall tiles, including cement mortar, removing serviceable tiles from site & rubbish off the premises, complete all as specified and directed. |
| 4 | Taking down cement or cement lime plaster or stone / brick wall, ceiling including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 5 | Taking out cement or cement lime mortar joints/ pointing to random rubble or polygonal rubble uncoursed or brought up to courses, complete all as specified and directed. |
| 6 | Taking down chowkhat or frames with shutter (without taking off shutter from the frame ) area exc 1.5 Sqm but n. exc 4.0 Sqm each complete with hold fasts etc complete all as specified and directed. |
| 7 | M&L for brick work with flyash bricks, straight or curved on plan exc 6M mean radius built in cement mortar 1:6 including demolition of brick work complete all as specified and directed. |
| 8 | M&L for rendering in cement mortar (1:6), 15mm thick on other than fair faces of brick work / stone masonary surfaces finished even and smooth without using extra cement, complete all as specified and directed. |
| 9 | M & L for preparation of newly plastered antifungal treatment surface of wall and applying two coats of 1st quality acrylic emulsion distemper (ready mixed Plastic paint) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over 1mm wall care putty and one coat of alkali resistant priming paint, complete all as per manufacturer's specification complete all as specified and directed. |
| 10 | M&L 15mm thick rendering in cement mortar (1:4) mixed with water proofing compound on other than fair faces of brick / stone masonary surfaces, finished even and smooth without using extra cement, complete all as specified and directed. Note : (WPC shall be measured and paid separately) |
| 11 | M&L for rough cast plaster mix with crusted stone (6-10mm), sand and cement in the ratio 1: 1.5: 1, over 15mm thick ready mix plaster rendering in CM 1:4 on stone / brick masonary wall surfaces complete all as specified and directed. |
| 12 | M & L for preparation of new plastered surfaces of wall and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm, over and including 1mm thick wall care putty over one coat of exterior primer applied @ 0.90 litre/ 10 sqm over plastering surfaces, complete all as specified and directed. MAKE :- ASIAN/APEX/BERGER (Weather coat all guard) |
| 13 | M&L 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in floors complete all as specified and directed. |
| 14 | M&L non skid (Matt finish) ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.18 Sqm but not exc 0.36 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in cement mortar 1:6 complete all as specified and directed. |
| 15 | M&L for glazed ceramic coloured tiles 7 to 8mm thick in vertcial surfaces of size 600x1200mm set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick screed plaster in cement mortar 1:4 complete all as specified and directed. |
| 16 | M&L for vitrified ceramic tiles light shade10mm thick (square / rectangular ) polished, area of each tiles exc 0.42 Sqm but not exceeding 1.00 Sqm, in floor etc set and jointed in 3mm width epoxy filling in white or coloured match to tile, including screed bed 15mm thick in CM 1:6 complete all as specified and directed. |
| 17 | M&L for vitrified ceramic tiles light shade 10mm thick (square / rectangular ) polished, area of each tiles exc 0.42 Sqm not exceeding 1.00 sqm, in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed plaster 10mm thick in CM 1:4 complete all as specified and directed. |
| 18 | M&L RCC, type B-1 (1:2:4) using 20mm graded aggregate in, slab supported on wall, walls beams and columns in floors, roof landings, Chajjas and platform etc. including form work, complete all as specified and directed. |
| 19 | M&L for TMT bars 10 mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending, spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 20 | M&L for marbonite tiles any shade, 12mm thick (square / rectangular ) polished, area of each tiles exc 0.42 Sqm not exceeding 1.70 Sqm, in cooking plateform, window cill etc. set and jointed in neat cment slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 complete all as specified and directed. |
| 21 | M&L for Pre-polished machine cut kota sotne slab, 20-25mm thick over and including 15mm thick screed bedding in cement mortar 1:6 as in floors, laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab, complete all as specified and directed. |
| 22 | M&L for Pre-polished machine cut kota sotne slab in skirting / steps / risers of reqd size, 20 to 25mm thick & including 15mm thick screed bedding in cement mortar 1:4 as in floors, laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab, complete all as specified and directed. |
| 23 | Dismantling loose /disintegrated portion of RCC Chajjas, bend shelves, beams balconies and similar work at any position or any height and dobbing out with PCC 1:1:5:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished required shape including applying anti corrosive paint on exposed surfaces of reinforcement and provision of necessary supporting form work and including 10mm thick plastering in CM 1:4, finished fair and even, complete all as specified and directed. |
| 24 | S&F Second class HW, plain, solid, straight chowkhats & frames, wrought, framed, rebated on the solid, rounded or chamfered, put together glue pinned at joints complete all as specified and directed. |
| 25 | S&F Pressed steel door frame of size 105 x 60mm for doors with one or more rebates incl necessary fixing lugs hinges, lock strike plate,hold fasts etc. complete all as specified. The rates include for one shop coat of priming and filling with PCC 1:3:6. complete all as specified and directed. |
| 26 | S&F Pressed steel door frame of size 125 x 60mm for doors with one or more rebates incl necessary fixing lugs hinges, lock strike plate, hold fasts etc. complete all as specified. The rates include for one shop coat of priming and filling with PCC 1:3:6. complete all as specified and directed. |
| 27 | S & F Flush shutters 30mm thick, solid core construction, with block board core and plywood face panels commercial type on both side and both facesis covered with approved pattern with Decorative coloured laminate type 1 of 0.9 mm thick and all around side faces covered with 10mm thick 1st class hard wood liping duly polished complete all as specified and directed. |
| 28 | S&F I st class HW, 35mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc divided into squares, with plain, chamfered or ounded, mitred and rebated sash bars, fitted with cut and mitred beads for securing glass etc, sizes of members shutters as specified in SSR Part I, selection 8, clause 8.24 (a), supplied and fitted to chowkhats complete all as specified and directed. |
| 29 | S&F 150mm long stainless steel barrel tower bolts complete all as specified and directed. |
| 30 | S&F 150mm long Stainless steel pull handles, complete all as specified and directed. |
| 31 | S&F 300mm long Stainless steel sliding door bolt with hasp and staple (bolt type) and fixing clips, complete all as specified and directed. |
| 32 | S&F 300mm ordinary Mild steel rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 33 | S & F in repairs 100 mm long dual leg door stopper of alumunium alloy body fixing on door, complete all as specified. |
| 34 | S&F continous (Piano) hinges, mild steel, bright finish, width of flaps (when open) 30mm complete all as specified and directed. |
| 35 | Taking down old u/s steel window / ventilator and S & F Steel window/ventilator factory made, out of MS hollow section 79mm x 39mmx1.6mm thick frame with double shutter (glazed & wiregauged shutters) made out of Z section using flush butt welding and tennon riveting all as per IS 1038/83, dobby hinges shall be provided to both shutters, Locking arrangements as per sample approval by GE, provided with knob, 10mm MS square bars in grill, Z section handle 100mm size and 150mm long hook & eye welded to frame and shutter, four Nos lugs welded to frame inculding necessary flat iron beading for securing wire gauge etc including holes, cutting holes for hold fast and making good in PCC 1:2:4 type B-1 including two coat of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and directed.Note : Wire mesh and sheet glass shall be measured & paid separately under respective items. |
| 36 | S & F in repairs 18/19mm thick MDF board and two face decorative laminate type, including teak wood lipping 19 x 6mm thick fixed with nails in shelves, partition and palmet boxes, shelves, almirah book cases, toilet boxes, racks, cup board shutter and similar works complete all as specified and directed. |
| 37 | S&F in repair stainless steel Soft Close hinge with assembly, complete all as specified and directed. (Item Code -5070 of Godrej) |
| 38 | S & F in repair 125mm oval shape fancy brass handle, polished bright complete all as specified and directed. |
| 39 | S&F hasp & staple 100mm size safety type, aluminium anodised with mild steel hinges pin including bolt of hinge plate & fixed with screws complete all as specified and directed. |
| 40 | Supply and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows,ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight,mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P.brass/ stainless steel screws, complete all as specified and directed. |
| 41 | Supply and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors,windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paidfor separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, rolling channel with bearing etc. complete all as specified and directed. |
| 42 | S&F 5.5mm thick sheet glass ordinary quality and glazing in square, complete all as specified and directed. |
| 43 | M&L providing 50x50mm aluminium anodised grills mesh for fixing in wooden gauged door shutter weight not less than 1.2Kg/ Sqm complete all as specified and directed. |
| 44 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of apertature 1.40mm and fixed with tinned tacks or stainless steel wire staples complete all as specified and directed. |
| 45 | S&F 3mm thick glass, ordinary quality, 3mm thick fixed with oil putty size of glass not exc 0.50 sqm in each pane, complete all as specified and directed. |
| 46 | S&F 3mm thick figured glass, pin head type and glazing with oil putty in square n. exc 0.50 Sqm in each pane, complete all as specified and directed. |
| 47 | S&F in repairs 25mm dia mild steel chromium plated curtain rod and decorative type knobs and curtain rod bracket with chromium plated U shaped support clamp suitable for 25mm dia rod complete all as specified and directed. |
| 48 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing using single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet, reinforced with MS square tube and fixing in opening as specification & drawing complete all as specified and directed. |
| 49 | S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick, (styles) with 2,4 or 6 raised panel design with 2mm thick moulded prelam (Nut Brown colour ) PVC sheet on the front face & 2mm prelam (Nut Brown colur ) PVC sheet on back face, and fixing inthe frame at site as per specification and drawing on page 161 of SSR (Part -II ) 2020 complete all as specified and directed. |
| 50 | S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 51 | S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 52 | S&F 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge and anodised ISI marked and fixed, complete all as specified and directed. |
| 53 | S&F in repair Deco door seal size 1.5\\" width door bottom sealing strip draft Excluder stopper with aluminium plate & nylon bristles for weather stripping complete all as specified and directed. |
| 54 | Taking down old unserviceable 15mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed. |
| 55 | Taking down old unserviceable 20mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed. |
| 56 | Taking down old unserviceable 25mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed. |
| 57 | S&F 15mm GI water tubing( Concealed type), medium grade, galvanised with all fittings ( and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed. |
| 58 | S&F 20mm GI water tubing, medium grade, galvanised with all fittings ( and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed. |
| 59 | S&F 25mm GI water tubing, medium grade, galvanised with all fittings ( and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed. |
| 60 | Refixing old 15mm GI tubing (Concealed type) galvanised with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed. |
| 61 | Refixing old 20mm GI tubing galvanised with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed. |
| 62 | Refixing old 25mm GI tubing galvanised with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed. |
| 63 | S&F in repair tubular towel rail brass chromium plated 20mm dia 'D' type 60cm long,complete all as sped & directed.Make: Prima (Cat No.PSS-4503-A) or equivalent as approved by GE. |
| 64 | S&F in repair towel ring brass chromium plated,complete all as sped & directed.Make: Prima (Cat No.PSS-4503-B) or equivalent as approved by GE. |
| 65 | S&F in repair Paper Holder brass chromium plated,complete all as sped & directed. Make: Prima (Cat No.PSS-4503-F) or equivalent as approved by GE. |
| 66 | Supply and fixing in repair CP Amaze square shower with arm (8'' x 8'') complete all as specified and directed.Make : Jaquar or equivalent as approved by GE. |
| 67 | Supply and fixing in repair PVC Multi utility Mirror cabinet , complete all as specified and directed.Make : Jaquar or equivalent as approved by GE. |
| 68 | Supply and fixing in repair Glass corner shelf 300mm with brass brackets, complete all as specified and directed. Make : Jaquar or equivalent as approved by GE. |
| 69 | S&F inrepair vitreous china white table top wash basins (660x430x140mm) and connecting pipe complete all as specified and directed.Make Jaquar or equivalent as approved by GE. |
| 70 | S & F in repair vitreous china wash down one piece closet (White) size 747x370x650mm, with integrated cistern, incl soft close seat cover and twin flush fittings etc. complete all as specified and directed. Make: Jaquar or equivalent as approved by GE. |
| 71 | Supply and Fixing in repairs vitreous china wash down water closet pedestal pattern pan white with trap including connection to existing out joint pipe, flushing pipe or Cistern, antisyphonage pipe, including making, etc complete including making goood to floor etc complete all as specified and directed.Make Jaquar or equivalent as approved by GE. |
| 72 | S&F in repair health faucet cast copper alloy chromium plated with flexible chrome hose and wall hooks complete all as specified and directed.Make Jaquar or equivalent as approved by GE. |
| 73 | S&F cast copper alloy chromium plated bottle trap fixed to WHB and wall complete all as specified and directed. Make Parryware T3201A1 or equivalent as approved by GE. |
| 74 | S&F looking mirror 900x600x6mm with frame, with chromium plated brass screws and cup washers fixed to wall complete all as specified and as directed. Make : Prayag (Cat No. BLM-03 F) or equivalent as approved by GE. |
| 75 | S&F in repair Soap dish fancy type, fixed to plugs with chromium plated brass screws embedded in the wall complete all as sped & directed. Make : Prayag (Cat No. BA-15) or equivalent as approved by GE. |
| 76 | S&F in repair PVC connection, heavy duty 15mm bore, 60cm long with 2 Nos PTMT nuts of approved quality complete all as specified and directed. |
| 77 | S&F in repair, 15mm bore Brass CP basin mixer for mixing hot & cold water for wash basin screwed down for iron pipe and fixed complete all as specified and directed.Make : Jaquar or equivalent as approved by GE. |
| 78 | S&F in repair, 15mm bore Brass CP wall mixer three in one system with bend set Telephonic shower and 1.5 m tube with stand, complete all as specified and directed.Make :Jaquar or equivalent as approved by GE. |
| 79 | S&F in repairs 15mm bore cast copper alloy chromium plated fancy bib tap long body , screwed for iron pipe complete all as specified and directed. Make : Jaquar or equivalent as approved by GE. |
| 80 | S&F in repair fancy type angle valves 15mm bore , cast copper alloy chromium plated, screwed down high pressure screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed. |
| 81 | S&F in repair 15mm bore stop valves (concealed), chromium plated cast copper alloy,with long shank and cap (Concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions fixed complete all as specified and directed |
| 82 | S&F mild steel framed work such as grills, grating cooler stands, water tank staging etc, with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed. |
| 83 | S&F 110mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors / trenches with & including existing / new MS stack clamps of FI 50 x 3mm including taking down old pipe line any types complete all as specified and directed. |
| 84 | S&F 75mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors / trenches with & including existing / new MS stack clamps of FI 50 x 3mm including taking down old pipe line any types complete all as specified and directed. |
| 85 | S&F 110mm bore PVC (SWR) bend / shoe of any radius with access door, complete all as specified and directed. |
| 86 | S&F 75mm bore PVC (SWR) bend / shoe of any radius with access door, complete all as specified and directed. |
| 87 | S&F in repairs PVC (SWR) floor trap/ Nahani trap 75mm, plain with grating including jointing to waste pipe fixed in cement concrete type (1:2:4) complete all as specified and directed. |
| 88 | S&F in repairs 110mm bore PVC (SWR) vent cowl complete all as specified and direted pleases. |
| 89 | Excavation in trenches not exc 1.5m wide and n. exc 1.5m deep and getting out in hard dense soil complete all as specified and directed. |
| 90 | Demolition and bracking up drain pipe SWG line set in CM of description, 150mm dia including side packing / haunching complete all as specified and directed.` |
| 91 | M&L for PCC 1:3:6 type C-2 using 40mm graded aggregate for bed concrete to drain pipe packing under hunching for sides for 150mm dia SWG pipe lines complete all as specified and directed. |
| 92 | M&L for SWG drain pipe grade 'A' 150mm dia laid in trenches incl jointing in CM 1:3 complete all as specified and directed. |
| 93 | Returning and filling in approved earth including levelling spreading watering and well ramming in any layers n. exc 25cm thick complete all as specified and directed. |
| 94 | Removing excavated materials n. exc 100m and depositing where directed and complete all as specified and directed. |
| 95 | M&L cement concrete 1:2:4 using 40mm graded aggregate as in surface channel and drain complete all as specified and directed. |
| 96 | Extra for fair finishes drain or channel 30cm and over in girth in cement concrete using extra cement including forming mounds metred /stopped ends etc complete all as specified and directed. |
| 97 | M&L PCC (1:3:6) type C-1 using 20mm graded stone aggregate, 75mm thick as in plinth protection/flooring etc. finished fair & even laid in alternative bays n. exc 2M in length and joints filled with bitumen mastic 1:3 complete all as specified and directed. |
| 98 | M&L for preparation of new steel surfaces over 10 cm width or girth & applying two coats of synthetic enamel paint of 1st quality, complete all as specified and directed. |
| 99 | M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth & applying one coat of synthetic enamel paint of approved quality, tint to achieve glossy finish, complete all as specified and directed. |
| 100 | M & L for complete removal of existing treatment of old plastered surfaces of wall and applying two coats of oil bound distemper having VOC content lessthan 50 gms /Ltr of approved manufacturer of required shade and colour, over a coat of primer over & including 1mm thick finished coat of white wall care white putty (JK/Birla), complete all as specified and directed. |
| 101 | S&F in repair kitchen sink with drainage board overall size not less than 915 x 460, bowl size 410 x 330 x 160mm made of stainless steel 1.00 mm thick with plugs, washers and waste including fixing cantilever brackets and connecting union complete all as specified and directed. |
| 102 | S & F in repair stainless steel plate rack made of 0.50mm thick of over all size 914mm x 609mm x 255mm and weight not less than 7.00 Kg each of approved quality complete all as specified and directed.Make :- Prayag Cat part No. P-336 or equivalent as approved by GE. |
| 103 | Dismantling of existing unserviceable RCC/PVC water tank of any capacity and S&F 1000 Litres capacity rotational moulded polythene water storage tanks(cylindrical vertical with closed top ) hoisted & fixed in position complete all as specified and directed. |
| 104 | S&F 20mm ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe of 20mm dia and fixed (minimum weight 210 gms) complete all as specified and directed. |
| 105 | Taking down existing tar felt or of any description including cement plaster or concrete of any thickness from the roof surfaces of building including cleaning the surfaces in all respect & preparing it for further treatment & removing rubbish from site complete all as specified and directed. |
| 106 | M&L for rendering 10mm thick in CM 1:4 mixed with water proofing compound @ 3% by weight of cement on fair faces of RCC/stone patti roof surfaces complete all as specified and directed. Note : (WPC Shall be measured and paid separately). |
| 107 | Material and labour for 40mm thick (avergae consolidated thickness) PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate laid in slope as in padding, finished even and smooth on existing slope including provision of 'V' shaped groove 6mm wide and 10mm deep at 1.20 metre interval or parts thereof, both ways on top of PCC padding and filled with mastic bitumen of (1:1) proportion complete all as specified and directed. |
| 108 | M&L roof treatment with APP modified polymeric water proofing membrane, 3mm thick having centre core not less than 100 micron high molecular high density polyethylene film (HMHDPE) protected on both sides with high polymeric asphaltic mix and 20 mircron HMHDPE film weight not less than 2.60 kg/ Sqm applied with bonding material using blown type bitumen primer Grade 85/25 @ 1.20 Kg/Sqm over bitumen primer conforming to IS -3384 @ 0.40 Kg /Sqm with final coat of bonding bitumen grade 85/25 @ 1.20 Kg /Sqm over APP membrane with all overlaps complete all as specified and directed |
| 109 | Fabrication & fitting of kitchen with cabinet/shelves & wardrobe/cupboard made out of 18mm thick (one side decorative lamination & other side baancing lamination) PVC sheet with piano hinges including providing cabinet for keeping baskets / cutlery baskket with handles/door shutters complete all as specified and directed. Note :- PVC sheet, fitting & fixture will be measured and paid separately as supply only. |
| 110 | Supply only in repairs 18mm thick (one side decorative lamination & other side baancing lamination) solid PVC board with cement solvent adhesive for shutter/kitchen cabinet / cup board/partition wall/ wall cabinet complete all as specified and directed. |
| 111 | Supply only soft close clip on hinge bright finish complete all as specified and directed. |
| 112 | Supply only 125 mm dia oval shape brass handle fancy type bright finish complete all as specified and directed. |
| 113 | Supply only in repair stainless steel basket (plain) of approved quality of size 520 X 485 X 100mm complete all as specified and directed. Make :- Godrej SS 304 |
| 114 | Supply only in repair stainless steel plate basket of approved quality of size 520 X 485 X 150mm complete all as specified and directed. Make :- Godrej SS 304 |
| 115 | Supply only basket / trolly channel 50cm long extruded MS galvanised over roller complete all as specified and directed. |
| 116 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fittings such as switches, ceiling roses, holders, regulators, sockets etc., removing materials from site and making good disturbed surface of walls, floors etc. complete all as specified and directed. |
| 117 | Taking down old unsv Submain Wiring and S&F in replacement of sub main wiring with two runs of single core PVC insulated and unsheathed multistranded (FRLS) copper conductor cable of size 6.00 Sqmm LT, 1100 volts grade, drawn through and including 25 mm dia or higher PVC non metallic concealed conduit with accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc. and fittings and one run of 6 sqmm single core multistranded copper conductor cable green colour as earth continuity conductor complete all as specified and directed. |
| 118 | M&L for point wiring with 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed cable in and including PVC rigid non metallic conduit medium grade not less than 20mm dia ISI marked and fittings and accessories concealed in walls/roof/ ceiling with suitable size of sunk type pressed steel modular terminal box and modular white cover plate with frame for suitable module as per site requirements for mounting of modular switches, sockets, fan regulator etc and one green colour cable of 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed as earth wire up to common earth and connected to earth for the following, complete all as specified and directed: |
| 119 | One light point/bell point controlled by one way 5 Amps SP switch |
| 120 | One ceiling fan/exhaust fan/Ventillation fan point controlled by one, one way switch. |
| 121 | One 5 pin 5 Amps socket outlet on same board with other switch |
| 122 | One 5 Pin 5 Amps socket outlet on independent board with other switch. |
| 123 | One light point controlled by two 2-way switches |
| 124 | All as per item No 118.00 above but 2.5 Sqmm single core multi strainded PVC insulated unsheathed (FRLS) cable for 15 Amp socket outlet on independent board, complete all as specifed and directed. |
| 125 | M&L for point wiring with One 3 pin socket outlet. 15 amps, independent, with cables 4 sq. mm size (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed cable in and including PVC rigid non metallic conduit medium grade not less than 20mm dia ISI marked and fittings and accessories concealed in walls/roof/ ceiling with suitable size of sunk type pressed steel modular terminal box and modular white cover plate with frame for suitable module as per site requirements for mounting of modular switches, sockets, fan regulator etc and one green colour cable of 4 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed as earth wire up to common earth and connected to earth for Geyser and AC socket outlet on independent board, complete all as specified and directed. |
| 126 | S&F modular stepped type ceiling fan regulator, 230 volt AC, 2 module, complete all as specified and directed. |
| 127 | S&F of modular switch 1 way 6/10Amp , 1 module, complete all as specified and directed. |
| 128 | S&F of modular switch 1 way 16Amp, 1 module, complete all as specified and directed. |
| 129 | S&F of modular switch 2 way 6 Amp, 1 module complete all as specfied and directed. |
| 130 | S&F of modular bell push, 6 Amp, 1 module, complete all as specified and directed |
| 131 | S&F of modular socket 6Amp, 2/3 pin combined 2 module complete all as specified and directed. |
| 132 | S&F of mdoular socket 6Amp/16 Amp, 2/3 pin combined 2 module complete all as specified and directed. |
| 133 | S&F ceiling rose surface bakelite 3 terminals 63.5 x 17 mm complete all as specified and directed. |
| 134 | S&F of door bell ding dong type electric 230 volts AC , single phase, complete all as specified and directed. |
| 135 | S&F of lamp holder PVC/polycarbonate type with back plate complete all as specified and directed. |
| 136 | Disconnecting and taking down existing electric meter and refixing the same electric meter, connecting, testing and sealing properly and making good disturbed surface of walls etc. complete all as specified and directed. |
| 137 | Taking down existing Ceiling fan carrying to the store and Supply and fixing New ceiling fan 1200 mm sweep , 230 Volts, AC , 50 Hz, copper winded motor, BE star rated white colour complete with motor, blade set of three nos , down rod, canopy, shackle assy including fan hook complete all as specified and directed. |
| 138 | Taking down existing Exhaust fan carrying to the store and S&F New exhaust Fans AC single phase 230/240 volts of size 300 mm sweep steel body with louver including connecting with three core flexible copper wire from ceiling rose to connector of fan complete all as specified and directed. |
| 139 | S&F in replacement box type LED tube light fitting in acrylic linear tube 1x 20 watt, 230V complete with bipin holders,LED power driver, connector block, and LED Tube rod 20 watt complete all as specified and directed. |
| 140 | Supply and fixing in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 141 | Supply and fixing in replacement LED lights fitting 1x 16W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 142 | S & F in replacement LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 143 | Supply and fixing in replacement testing and commissioning energy saving street light luminaire 35 watt LED , pressure die cast housing with epoxy powder coated with colour finish and prismatic poly carbonate coverlic cover complete with individual LED lences and complete all as specified and directed. |
| 144 | Supply and fixing in replacement street light bracket made of 32 mm GI pipe , 1.2 mtr lenght fixed with two nos of clamp , nut and bolts complete all as specified and directed. |
| 145 | Taking down existing geyser carrying to the store and S&F installation, testing and commissioning of new water heater storage type outer ABC body, electric suitable for single phase ,50HZ, AC supply, 2 KW heating element , with safety fusible plug confirming to relevant IS of 25 ltrs capacity 3 star rated, Horizontal fixed with fastner of 6 inches set of 4 and with connection pipes of stainless steel SS 304 grade pack of with PTMT nuts of length 24 Inches and testing complete all as specified and directed. |
| 146 | Supply & fix in replacement GI Tubes 15 mm dia medium grade with all fittings and fixed complete to walls/floors/trenches complete all as specified and directed. |
| 147 | Supply and fixing in replacement Bib tap brass CP screwed for iron pipe of size 15 mm bore complete all as specified and directed. |
| 148 | Supply and fixing in replacement stop valve brass CP high pressure both ends screwed for iron pipe of size 15 mm dia complete all as specified and directed. |
| 149 | S & F in replacement Single pole and neutral enclosure with a two pin and earth plug and socket with one single pole MCB 20 amp complete all as specified and directed. |
| 150 | Taking down old VTPN any type S&F New VTPN , 415 volts,4 way double door, with 200 Amps rated bus bar, neutral bar with shrouds, earth bar, IP-43 , made out of sheet steel enclosure, recessed type, factory made powder coated suitable for housing MCCBs as incomer-160 amps and 12 outgoing including blanking plate complete all as specified and directed. |
| 151 | Taking down old DB any type and S&F New MCB distribution board TPN 8 way, 415 volts, double door, with 200 Amps rated bus bar, neutral bar with shrouds, earth bar, IP-43 , made out of sheet steel enclosure, recessed type, factory made powder coated suitable for housing MCBs as incomer and outgoing including blanking plate complete all as specified and directed. |
| 152 | S & F in replacement of MCB SP, 240 volt, 6 Amp to 40 Amp capacity, 10 KA, 'B' curve complete all as specified and directed. |
| 153 | S & F in replacement of MCB SP, 240 volt, 63 Amp capacity, 10 KA, 'B' curve complete all as specified and directed. |
| 154 | S & F in replacement of MCB SPN, 240 volt, 40 Amp capacity, 10 KA, 'B' curve complete all as specified and directed. |
| 155 | S&F in replacement of MCB TPN, 415 volt, 63 Amp capacity,10 KA, 'B' curve complete all as specified and directed. |
| 156 | Supply, fixing/ installation, and commissioning in replacement of old cement type of Chinmney with Wall mounted Electronic kitchen Chimney 60 Cm, single phase 240 Volts with BLDC Motor, filterless technology, auto clean functionality and oil collector tray, and low noise operation, 1700 CFM Suction Power using Baffle Filtres with installation of ducting arrangement, Opening Space in Existing Wall/Roof with complete with all as specified and directed. |
| 157 | M & L for earthling complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to GI lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electric plate No 3 of SSR Part-I connected to continuous earth wire on main switch board all as specified or indicated and testing on completion including provision of earth wire protection by 15 mm dia medium grade GI pipe and watering pipe shall be 20 mm bore, medium grade including excavation & earth work in any type of soil & disposal of soi, providing alternate layers of charcoal and common salt, constr of PCC earth chamber in mix 1:3:6 type C-1 with 40mm thick RCC 1:2:4 type B-1 cover with handle made out oof 8mm dia bars, watering arrangement with funnel & wire mesh, complete all as specified and directed. Note : The unit rate includes for protection pipe and GI wire 4.00 mm from top of earth plate up to 7.5 meter above ground level. |
| 158 | Taking down old TV Point and S&F new TV Socket Point incl PVC conduit and co axial cable wire complete all as specified and directed. |
| 159 | Taking down old Telephone socket and S&F new Telephone socket Point incl PVC conduit and telephone wire complete all as specified and directed. |
| 160 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core including taking up/ down old cable any types any size complete all as specified and directed. |
| 161 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation for laying cable etc and getting out in soft/loose and any type of soil complete all as specified and directed. |
| 162 | Removing of excavated material (soil) to a distance n.exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed. |
| 163 | M&L bricks for protection cover to under ground cable (with old size sub class 'B' bricks) laid flat abutting each other with width of protection being equal to length of brick. The gap between should not exceed 10 mm complete all as specified and directed. |
| 164 | M&L for dry river sand and punning for cushioning and cover for protection of under ground electric cable complete all as specified and directed. |
| 165 | Supply and fixing tubes light grade GI tubing 40 mm dia with all fitting laid in trenches, fixed on pole/on wall for cable protection complete all as specified and directed. Please Enable Macros to View BoQ information |
| 166 | Supply and fixing tubes light grade GI tubing 40 mm dia with all fitting laid in trenches, fixed on pole/on wall for cable protection complete all as specified and directed. Please Enable Macros to View BoQ information |
