|
| 1 | Demolition of cement concrete unreinforced in ground floors, pavings not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and disposal outside MoD land complete all as specified and directed. |
| 2 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead complete all as specified and directed. |
| 3 | Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 metres lead complete all as specified and directed. |
| 4 | Dismantling doors, windows and clerestory windows (steel or wooden) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead, area 3 sq. metres and below complete all as specified and directed. |
| 5 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead for thickness of tiles upto 25 mm complete all as specified and directed. |
| 6 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead complete all as specified and directed. |
| 7 | Dismantling G.I. pipes 15mm to 40mm nominal bore including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead complete all as specified and directed. |
| 8 | Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead complete all as specified and directed. |
| 9 | Taking down old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead complete all as specified and directed. |
| 10 | Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level complete all as specified and directed. |
| 11 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials including malba complete all as specified and directed. |
| 12 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead complete all as specified and directed. |
| 13 | Dismantling C.I. or asbestos rain water pipe 100/110 mm dia pipe with fittings and clamps including stacking the material within 50 metres lead complete all as specified and directed. |
| 14 | M&L for plinth protection 50mm thick of cement concrete 1:3:6 type C-1 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth complete all as specified and directed. |
| 15 | M&L for pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate as specified ; 125x45mm single rebate fixed with lugs with split end tail to each jamb complete all as specified and directed. |
| 16 | M&L for steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works complete all as specified and directed. |
| 17 | M&L for aluminium Powder coated aluminium (minimum thickness of powder coating 50 micron) work for frame of doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing & panelling to be paid for separately) complete all as specified and directed. |
| 18 | M&L for powder coated aluminium work For shutters of doors (minimum thickness of powder coating 50 micron), windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required including fittings (such as handle, tower bolt etc.) complete all as specified and directed. |
| 19 | M&L for powder coated aluminium (minimum thickness of powder coating 50 micron) grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement, specification and as directed. (Only weight of grill to be measured for payment) |
| 20 | Supply and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. (Cost of aluminium snap beading/Gasket shall be paid in basic item): with float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) complete all as specified and directed. |
| 21 | Supply & fixing fly proof wire gauze to windows, clerestory windows & doors complete Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides complete all as specified and directed. |
| 22 | Providing and fixing 6 mm thick Aluminium Composite Panel fixed in aluminium doors and partition frames with EPDM rubber / neoprene gasket etc. (Cost of aluminium snap beading & gasket shall be paid in basic item )ACP (Aluminium Composite Panel) of the following product description , as specified and directed. (a) Panel Thickness 6 mm(b) Top/Bottom Aluminium Sheet 0.25 mm(c) Core Thickness 5.5 mm(d) Core Type LDPE(e) Minimum Weight 6.8 Kg/Sqm |
| 23 | Supply and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. with stainless steel cover plate minimum 1.25 mm thickness complete all as specified and directed. |
| 24 | Supply and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete all as specified and directed. |
| 25 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak three ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick Fixing with hinges of required size and necessary screws complete all as specified and directed. (Note: Hinges and necessary screws shall be paid separately) |
| 26 | Taking out existing wooden door shutter, repair by cutting, painting the repaired portion to match the existing and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, complete all as specified and directed. |
| 27 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building with 18 mm thick stone slab over & including 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed. (Polished Granite stone slab colour of Telephonic Black, Cherry/Ruby Red or equivalent) |
| 28 | Providing and laying Non Skid Ceramic floor tiles of size 300x300 mm x 7 to 8mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid over & including 20 mm thick cement mortar 1:6 (1 Cement : 6 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. complete all as specified and directed. |
| 29 | Providing and fixing Ist quality ceramic glazed wall tiles of size 450x300x7 to 8 mm thick conforming to IS: 15622 of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer in-Charge, in skirting, risers of steps and dados, over & including 10 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete all as specified and directed. |
| 30 | Providing and laying in floor Double charge vitrified tile polished finish of Size of Tile 600 x 1200 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid over & including 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily. complete all as specified and directed. |
| 31 | Providing and laying Vitrified tiles of size 1000x1000 mm (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over & including 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete all as specified and directed. |
| 32 | M&L for 15 mm cement plaster on single or half brick wall finished even & smooth in CM 1:4 (1 cement: 4 fine sand) complete all as specified and directed. |
| 33 | M&L for 15 mm cement plaster on single or half brick wall finished even & smooth in CM 1:6 (1 cement: 6 fine sand) complete all as specified and directed. |
| 34 | M&L for 5 mm cement plaster on ceilings finished even & smooth in CM 1:3 (1 cement: 3 fine sand) complete all as specified and directed. |
| 35 | Providing and applying plaster of Paris putty in patches of 2 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed. |
| 36 | M&L for distempering with acrylic washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinable priming coat with cement primer complete all as specified and directed. |
| 37 | M&L for Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed. |
| 38 | M&L for Painting on Wooden surfaces with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : New work (two or more coats) including a coat of approved wood primer but excluding a coat of mordant solution complete all as specified and directed. |
| 39 | M&L for Painting Steel work with Deluxe Multi Surface Paint to give an even shade. New Work Two or more coat applied @ 0.90 litre/10 sqm over an under coat of primer applied @ 0.80 litre/10 sqm of approved brand and manufacture complete all as specified and directed. |
| 40 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete all as specified and directed. |
| 41 | M&L for Distempering with 1st quality acrylic distemper (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade on Old surfaces (one or more coats) complete all as specified and directed. |
| 42 | M&L for Finishing walls with Acrylic Smooth exterior paint of required shade on Old surfaces (Two or more coat applied @ 1.67 litre/ 10 sqm) on existing cement paint surface complete all as specified and directed. |
| 43 | M&L for Painting on Old Wooden Surfaces with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade (one or more coats) complete all as specified and directed. |
| 44 | M&L for Painting on Old Steel Surfaces with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade (one or more coats) complete all as specified and directed. |
| 45 | Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete all as specified and directed. |
| 46 | Providing and fixing white vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: complete all as specified and directed. |
| 47 | Providing and fixing white vitreous china wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer of approved quality and make with C.I. brackets, including painting of fittings and brackets, cutting and making good the walls wherever required complete all as specified and directed. |
| 48 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make complete all as specified and directed. |
| 49 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete, Semi rigid pipe 32 mm dia complete all as specified and directed. |
| 50 | Providing and fixing Brass CP Waste Coupling for wash basin and sink, of approved quality, Waste coupling 31 mm dia of 79 mm complete all as specified and directed. |
| 51 | Providing and fixing Stainless Steel SS 304 grade kitchen sink as per IS:13983 minimum thickness 1mm with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required, Kitchen sink with drain board 510x1040 mm bowl depth 250 mm complete all as specified and directed. |
| 52 | Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittings : Size 600x450x200 mm complete all as specified and directed. |
| 53 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 40 mm diacomplete all as specified and directed. |
| 54 | Providing and fixing 600x450 mm bevelled edge mirror minimum 5mm thick of superior glass (of approved quality) complete fixed to wooden cleats with C.P. brass screws and washers complete all as specified and directed. |
| 55 | M&L for Tubular towel rail, 20mm dia, D type, 60cm long between flanges brass chromium plated including bracket & CP brass screw complete all as specified and directed. |
| 56 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, SDR11 having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints, Exposed on wall 25 mm nominal dia Pipes complete all as specified and directed. |
| 57 | Providing and fixing 25 mm CPVC Ball Valve complete all as specified and directed. |
| 58 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes SDR11, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints, Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes complete all as specified and directed. |
| 59 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore complete all as specified and directed. |
| 60 | Providing and fixing CP Brass Single lever wall mixer of quality & make as approved by Engineer in charge, 15 mm nominal diacomplete all as specified and directed. |
| 61 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms, 15 mm nominal bore complete all as specified and directed. |
| 62 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming E to IS:8931, 15mm nominal bore complete all as specified and directed. |
| 63 | Providing and fixing uplasticised PVC connection pipe with brass unions: 45 cm length, 15 mm nominal bore complete all as specified and directed. |
| 64 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end), 25 mm nominal bore complete all as specified and directed. |
| 65 | Providing and fixing Stainless Steel grating (Grade 304) Circular type 100 mm nominal dia minimum 1 mm thick complete all as specified and directed. |
| 66 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat of 65mm X 100mm size comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm², modulus of elasticity 900 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed. |
| 67 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter 30 mm thick of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm², modulus of elasticity 850 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 68 | Providing and fixing Stainless Steel sliding door bolts, ISI marked , with nuts and screws etc, 250x16 mm complete all as specified and directed. |
| 69 | Providing and fixing Stainless Steel tower bolts, ISI marked, 200x10mm complete all as specified and directed. |
| 70 | Providing and fixing Stainless Steel handles, ISI marked, with necessary screws etc, 125 mm complete all as specified and directed. |
| 71 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc. complete all as specified and directed. |
| 72 | Providing and fixing toilet paper holder: C.P. brass complete all as specified and directed. |
| 73 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved complete all as specified and directed. |
| 74 | Providing and fixing 100 mm sand cast Iron grating for gully trap complete all as specified and directed. |
| 75 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors: 100 mm inlet and 100 mm outlet Sand cast iron S&S as per IS: 3989 complete all as specified and directed. |
| 76 | Providing and fixing IS: 12817 marked stainless steel butt hinges with stainless steel screws etc, 125x64x1.90 mm complete all as specified and directed. |
| 77 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length. Kiln seasoned and chemically treated 2nd class hard wood complete all as specified and directed. |
| 78 | Providing and fixing 19 mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes, shelves, racks, almirah, cupboard and drawer etc. including necessary nails, screws etc. complete all as specified and directed. |
| 79 | Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete all as specified and directed. |
| 80 | Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel chromium plating grade 1 as per IS: 1068 and fixing with necessary screws etc, Overall width 35 mm complete all as specified and directed. |
| 81 | Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete all as specified and directed. |
| 82 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, 1000 Litre capacity with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but including brass float valve 20mm dia fittings and the base support for tank complete all as specified and directed. |
| 83 | Cleaning of terrace/RCC water storage tank of capacity 10,000 Litre at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. The old date already written on tank should be removed with paint remover or black paint complete all as specified and directed. (If during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) |
| 84 | M&L for water proofing treatment over roof with water-based, single component UV resistant elastomeric PU liquid membrane coating with the following operations complete as per manufacturer's instruction, specifications & as directed(i) Surface preparation : The surface to be treated should be sound and free from all types of dirt, dust and debris. Clean surface by brushing, scraping or chipping to eliminate all defective materials and foreign matter. Proper surface preparation needs dry mechanical grinding to expose base Substrate. Making of angle fillets(75mm X 75mm) all around the periphery of the wall with polymer modified mortar using SBR Latex Plus.(ii) Construction joints : All construction joints and cracks more than 1mm wide shall be treated by cutting V groove and filling with polymer modified SBR Latex and reinforced with geotextile membrane dipped in PU liquid Membrane before the 1st coat application.(iii) Water proofing membrane : Applying water-based ,single component UV resistant elastomeric PU liquid membrane coating applied with brush/roller having SRI >109 with an elongation of >400% and tensile strength of 1.4 MPa as per ASTM D 412, 80 % Solid Content, shore A Hardness of min. 50 as per ASTM D 2240. The system includes final base preparation as per manufacturer's instruction, applying water-based ,single component UV resistant elastomeric PU liquid membrane coating in three coats at 2.8 kg per Sqm providing 1.5 mm DFT , complete as per Manufacturer specifications . Waterproofing membrane to be terminated on parapet wall in a V groove of size 25 mm x 25 mm atleast 300 mm above FFL which should be sealed with Polymer Mortar Complete all as specified and directed by Engineer-in-Charge. The application will be executed by company authorised applicator upon verification from the company. |
| 85 | Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers complete all as specified and directed. |
| 86 | Providing and fixing soil, waste and vent pipes, 100 mm dia Sand cast iron S&S pipe as per IS: 1729 complete all as specified and directed. |
| 87 | Providing and fixing soil, waste and vent pipes 75 mm diameter, Sand cast iron S&S pipe as per IS: 1729 complete all as specified and directed. |
| 88 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A. including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, Single socketed pipes. 110 mm diameter complete all as specified and directed. |
| 89 | Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, Coupler 110 mm dia complete all as specified and directed. |
| 90 | Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, Bend 87.5° angle 110 mm dia bend complete all as specified and directed. |
| 91 | Providing and fixing unplasticised PVC pipe clips of approved design to unplasticised PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement: 4 coarse sand) and making good the wall etc. 110 mm dia complete all as specified and directed. |
| 92 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams complete all as specified and directed. |
| 93 | Raking out joints in lime or cement mortar and preparing the surface for re pointing or replastering, including disposal of rubbish complete all as specified and directed. |
| 94 | M&L for Flush/ Ruled pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) : complete all as specified and directed. |
| 95 | Cleaning the sand stone surface and removing dirt, dust, bird dropping, grease, oil, algae, fungus, monkey beats, vegetable growth etc., including providing, applying and washing the surface with liquid Ammonia Chemical of 5% solution and other chemical cleaning agent as approved by Archaeological Survey of India/ Engineer-in-charge, of approved brand and manufacturer, with the help of required scrubbers and also cleaning with machine operated water jet mixed with desired quantity of fine silica where ever required, without causing any scratching/ damage to the stone surface and finally washing the surface with clean water with the help of pressure jet machine, complete in all respect, including taking all precautions to safeguard ventilators, windows, doors etc. by suitable covering so as to avoid any damage to the building/ structure, all as per direction of Engineer-in-charge (The rate is inclusive of all materials, labours involved & scaffolding etc). |
| 96 | M&L for Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc, With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration complete all as specified and directed. |
| 97 | M&L for along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.: 1 With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration complete all as specified and directed. |
| 98 | M&L for treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration complete all as specified and directed. |
| 99 | M&L for treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to the full depth of the hole : With Chlorpyriphos/Lindane E.C. 20% with 1% concentration complete all as specified and directed. |
| 100 | M&L for treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same complete all as specified and directed. |
| 101 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, complete all as specified and directed. |
| 102 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, including door handle, lock and stopper etc complete all as specified and directed. |
| 103 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) complete all as specified and directed. |
| 104 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm centre to centre and cross \\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \\"T\\" at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm centre to centre along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in perforated Tegular edge global white colour tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fibre acoustical fleece complete all as specified and directed. |
| 105 | Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete all as specified and directed. |
| 106 | Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish for door/ window/ clerestory window complete all as specified and directed. |
| 107 | M&L for opening of structural cracks by chipping up to full depth of crack, cleaning the surface and repairing the cracks by providing & applying epoxy mortar manufactured under licence from CECRI / CSIR (Central Electrochemical Research Institute) - Karaikudi including material, labour, machinery, etc complete all as specified and directed. |
| 108 | Providing and inserting 12 mm dia galvanised steel injection nipple in honey comb area and along crack line including drilling of holes of required diameter (20 mm to 30 mm) up to depth from 30 mm to 80 mm at required spacing and making the hole & crack dust free by blowing compressed air, sealing the distance between injection nipple with adhesive chemical of approved make and allow it to cure complete all as specified and directed. |
| 109 | Providing and injecting approved Epoxy injection grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/masonry by suitable gun/pump at required pressure including cutting complete as per directions of Engineer-in-Charge grout in concrete/RCC work of approved make complete all as specified and directed. |
| 110 | Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh weight not less than 7.75 Kg or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of “L” shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-in-charge. |
| 111 | Building Work B/R Portion (New Item)Earth work in excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out in soft/loose soil complete all as specified and directed. |
| 112 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes, electric cable, water pipeline etc not exceeding 10 sqm on plan and getting out in soft/loose soil complete all as specified and directed |
| 113 | M&L PCC 1:4:8 type D2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 114 | M&L Stone masonry work in plain ashlar in super structure upto floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) including pointing with cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade , One face dressed , Red sand stone complete all as specified and directed. |
| 115 | Returning filling in, including spreading, levelling, watering and well ramming in layers n. exc 25 cm thick in any type of soil complete all as specified and as directed. |
| 116 | Providing and fixing up to floor five level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centring, shuttering complete : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) complete all as specified and directed. Please Enable Macros to View BoQ information |
| 117 | Providing and fixing up to floor five level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centring, shuttering complete : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) complete all as specified and directed. Please Enable Macros to View BoQ information |
