|
| 1 | S&F in repairs Thin Rim Table Top Wash Basin - Snow White 500 x 400 x 130 mm Complete all as specified and directed. Make : CERA/HINDWARE/PRAYAG |
| 2 | S&F in Repairs Tall height Pillar tap single lever Basin mixer with braided houses complete all as specified and directed. Make : CERA/HINDWARE/PRAYAG |
| 3 | S&F in repairs vitreous china wash hand basin in repair white flat back size 450x300mm, low density pvc waste pipe 6 Kgf/sqm, etc. complete all as specified and directed. Make : CERA/HINDWARE/PRAYAG |
| 4 | S&F in Repairs Pillar cock with swan neck spout (left/right) and aerator Complete all as specified and directedMake : CERA/HINDWARE/PRAYAG |
| 5 | S&F in repairs Wash hand basin of size 515 x 410 x 195 mm with full pedestal height 820mm Complete all as specified and directed. Make : CERA/HINDWARE/PRAYAG |
| 6 | S&F in Repairs Pillar tap single lever for wash basin Basin tall height complete all as specified and directed. Make : CERA/HINDWARE/PRAYAG |
| 7 | S&F in repairs counter top wash basin one piece snw white 460x310x220 mm Complete all as specified and directed Make : CERA/HINDWARE/PRAYAG |
| 8 | S&F in Repairs Pillar tap single lever centre hole basin mixer swan neck with braided houses complete all as specified and directed. Make : CERA/HINDWARE/PRAYAG |
| 9 | S&F in Repairs Angle Cock/Stop Cock with flange Complete all as specified and directed Make : CERA/HINDWARE/PRAYAG |
| 10 | S&F in Repairs Bib cock with wall flange Complete all as specified and directed Make : CERA/HINDWARE/PRAYAG |
| 11 | S&F in Repairs Bib cock long body with wall flange Complete all as specified and directed Make : CERA/HINDWARE/PRAYAG |
| 12 | S&F in Repairs 2 way Bib cock with wall flange Complete all as specified and directedMake : CERA/HINDWARE/PRAYAG |
| 13 | S&F in repairs Health faucet Complete all as specified and directed Make : CERA/HINDWARE/PRAYAG |
| 14 | S&F in repairs wall mixer 3 in 1 with telephonic shower Complete all as specified and directed , Make : CERA/HINDWARE/PRAYAG |
| 15 | S&F in repairs Rimless One Piece EWC size 680 x 365 x 705 mm including Duroplast soft close seat cover S Trap/Ptrap Make : CERA/HINDWARE/PRAYAG |
| 16 | S&F in repairs One Piece EWC flushing kit square/circleMake : CERA/HINDWARE/PRAYAG |
| 17 | S&F in Repairs (EWC) water closet of size 510 x 335 x 390 mm Complete all as specified and directed Make : CERA/HINDWARE/PRAYAG |
| 18 | S&F in Repairs (Orrisa Pan) water closet of size 530x440 mm Complete all as specified and directed Make : CERA/HINDWARE/PRAYAG |
| 19 | S&F in Repairs PVC Flush Tank 10 Ltr Capacity Complete all as specified and directed Make : CERA/HINDWARE/PRAYAG |
| 20 | S&F in Repairs Urinal pot of size 345x320x560 mm Complete all as specified and directed Make : CERA/HINDWARE/PRAYAG |
| 21 | S&F in Repairs Half Urinal pot of size 330x250x445 mm Complete all as specified and directed Make : CERA/HINDWARE/PRAYAG |
| 22 | S&F in Repairs Urinal Glass partition Complete all as specified and directed |
| 23 | S&F in Repairs EWC Seat cover white colour Complete all as specified and directed Make : CERA/HINDWARE/PRAYAG |
| 24 | S&F in Repairs Over hed shower 150mm dia Complete all as specified and directed Make : CERA/HINDWARE/PRAYAG |
| 25 | S&F in Repairs Toilet paper holder Complete all as specified and directed Make : CERA/HINDWARE/PRAYAG |
| 26 | S&F in repairs Soap Try Complete all as specified and directed Make : CERA/HINDWARE/PRAYAG |
| 27 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, glazed with putty or fixed with beads complete all specified and directed. |
| 28 | S&F sheet glass of 4.8 mm thick ordinary quality glass coloured and glazing with oil putty or necessary rubber beeding in square in each pane complete all as specified and directed. |
| 29 | S&F in Repairs floor mounted vanity box (HDHMR) of standered size top mounteed with Glass finish ceramic marble having 3 drawers Complete all as specified and directed Make : Cera |
| 30 | S&F for plain sheet glass of 4mm thick ordinary quality glass and glazing with oil putty in square in each pane complete all as specified and directed. |
| 31 | S&F for figured glass pin headed of 3mm thick ordinary quality glass and glazing with oil putty in square in each pane complete all as specified and directed.. |
| 32 | S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks/stainless steel wire staples all as specified. |
| 33 | S&F in repairs CP tubular Towel Rail 600mm Long Complete all as specified. |
| 34 | S&F in repairs Aluminum alloy body Floor Door Stopper long tongue Complete all as specified. |
| 35 | S&F in repairs Aluminum extruded section body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixe Complete all as specified. Make : Godrej |
| 36 | S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed Complete all as specified. |
| 37 | S&F in repairs 100 mm size stainless steel butt hinges, medium weight , cold rolled, mild steel and fixed complete all as specified and directed |
| 38 | S&F in repairs Stainless steel barrel tower bolt 150mm long extruded section all as specified. |
| 39 | S&F in repairs 150mm size stainless steel handles fabricated type anodised complete all as specified. |
| 40 | M&L for 16 to 18mm thick Dholpur Red/grey stone cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.25 sqm area and not exceeding 0.5 sqm as in wall cladding including neccessary fixtures and fittings and fixing arrangments, polishing, rubbing & including cleanign and dismantling of old slabs complete all as specified. |
| 41 | S&F in repairs 4 Lever Verical locks 100mm long for aluminum doors comlete all as specified and directed |
| 42 | MaL Cleaning,greasing,resecuring,easing & adjusting any size etc, without taking down Steel rolling shutters, and one shop coat of primer erected in position as indicated, complete all as specified and directed. |
| 43 | S&F Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete: push pull or but gear operated type with bevel gear box and crank handle complete all as specified and directed. |
| 44 | S&F in repairs for Safety level Locks Mild Steel with 4 levers for rolling shutters complete all as specified and directed. |
| 45 | S&F in repairs for Bearing for rolling shutters complete all as specified and directed. |
| 46 | S&F 30mm th 2nd class hardwood Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides includig taking down exisitng shutters and removing to store complete all as specified and as directed. |
| 47 | M&L for preparation of new wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 48 | S&F in repairs Drappery curtain rods decorative type stainless steel 25mm nominal dia of approved quality including fixing of two number decorative brackets fixed in brick/concrete wall, Two number of latto on both ends of curtain rods complete all as specified and directed. |
| 49 | S&F in repairs 15mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 50 | S&F in repairs 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 51 | S&F in repairs 15mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 52 | S&F in repairs 15mm bore PVC connection pipe of 450mm size with 2 Nos brass check nuts with washers |
| 53 | S&F in repairs 500 ltrs capacity three layer rotational molded polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted of and fixed in position including, dismantling existing water tanks etc all as specified and directed. |
| 54 | S&F in repairs 1000 ltrs capacity three layer rotational molded polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted of and fixed in position including, dismantling existing water tanks etc all as specified and directed. |
| 55 | Supply only waste fittings brass chromium plated 32mm dia for wash hand basin complete all as specified and directed. |
| 56 | S&F in Repairs PVC waste pipe 32mm/40 mm dia for wash hand basin/SInk complete all as specified and directed. |
| 57 | S&F in repairs Water closet (Squatt pattern) complete including provision of lime/Cement bedding concrete bedding including complete all as specified and directed. |
| 58 | S&F in repairs 1200 x450x 5.0 mm thick looking mirror bevelled edge of selected quality glass with aluminium frame of channel alround mounted on AC building board or commercial ply wood and fixed to wooden plug with CP brass screws, complete all as specified and directed. |
| 59 | S&F in repairs 600 x 450 x 5.0 mm thick looking mirror bevelled edge of selected quality glass fancy type square/circle/ovel framed/unframed with CP brass screws, complete all as specified and directed. |
| 60 | S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 61 | S&F in repair to existing aluminum window and ventilator shutters, fixed type/sliding type/casement type including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws , hinges, rollers etc. complete all as specified. |
| 62 | S&F in repair to existing aluminum Door shutters, fixed type/sliding type/casement type including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws , hinges, rollers etc. complete all as specified. |
| 63 | S&F in repair to 12 mm thick WPC Boards both side lamination incuding necessary glazing clips to fixing with aluminum frame work complete all as specified. |
| 64 | S&F in repair to Mild steel anchoring rods to walls for tying of mosquito net wire in Single Living Baracks including necessary drilling/breaking of masonry walls and making match to exisitng surface complete all as specified. |
| 65 | S&F in repair to Mild steel wire 4mm dia incuding necessary tightening with anchoring rods complete all as specified. |
| 66 | Taking down of wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards/ slabs/ blankets any thickness, including cover fillets. complete all as specified. |
| 67 | M&L for PVC sheet covered one side gypsum board of size 600mmx600mmx12mm thick in ceiling fixed with screws complete all as specfied and directed |
| 68 | M&L for powder coated Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surroundingwall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5mm fixed to the intermediate. channel with connecting clips across the intermediate channel at 457 mm centre to centre. |
| 69 | M&L 7 to 10mm thick PVC panels light weight, waterproof, and durable coloured plain/designed/groved with standard panel sizes typically around 250mm x 3050mm (10ft length) feature interlocking tongue-and-groove systems, suitable for vertical or horizontal installation on walls and ceilings including GI Corners fixing complete all as specified and directed. Note:- Colour & Type should be directed by Engr-in-Charge. |
| 70 | Taking up or down steel tubing and connections including clening for refixing or removal to store of 15mm bore complete all as specified and directed. Please Enable Macros to View BoQ information |
| 71 | Taking up or down steel tubing and connections including clening for refixing or removal to store of 15mm bore complete all as specified and directed. Please Enable Macros to View BoQ information |
