|
| 1 | 12mm thick plaster in cement mortar in 1: 6 mix |
| 2 | 6 mm thick plaster in Cement Mortar 1:3 mix.(Ceiling) All rooms |
| 3 | Cement concrete flooring 1:2:4 (1Cement: 2 coarse sand: 4 graded stone aggregate). 50 mm thick 20mm nominal size stone aggregate (crushed) |
| 4 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 5 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied |
| 6 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cementand matching pigments etc. |
| 7 | Providing and laying polished granite stone flooring in required design and pattern in a linear as well as curvilinear portions of kitchen with 18mm thick stone slab over 20mm thick base cement mortar 1: 4 laid with cement slurry and pointing with white cement slurry admixed with matching pigment including rubbing etc .polished granite slab jet black, cherry red , elite brown , cat eye or equivalent |
| 8 | roviding and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlleddevice (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid. |
| 9 | Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock ( GF ONLY) |
| 10 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings( GF ONLY) |
| 11 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 12 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. |
| 13 | Providing and fixing poly vinyl chloride (PVC) pipes for drainage of waste water etc including fittings all complete |
| 14 | Providing and fixing PTMT bib cock of approved quality and colour 15mm nominal bore |
| 15 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms. |
| 16 | Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, |
| 17 | Providing and fixing 15mm nominal bore C.P brass angle valve for basin mixer and geyser points of approved make conforming to IS 8931 |
| 18 | Providing and fixing electrical points all complete job |
| 19 | Brick work with FPS bricks of class designation 75 in super structure in cement mortar 1:6 (1 Cement : 6 Coarse sand) including Extra Brick Work. From plinth to floor v level |
| 20 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement :1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 21 | Reinforcement of RCC works including straightening, cutting, bending placing in position and binding all complete |
| 22 | Centering and shuttering including strutting propping etc. and removal of form wor |
| 23 | Providing and fixing wood work in poplar wood in Truss / Purlins/ rafters/ posts / post plates or like components including Hoisting and fixing of all Material complete job |
| 24 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners including)Second class kail wood |
| 25 | Providing and fixing glazed shutters(35mm) for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws ( Second class Kail wood ) |
| 26 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. |
| 27 | Plain particle board flat pressed, 3 layer or graded wood particle boardmedium density Grade I, IS : 3087 marked |
| 28 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ liter |
| 29 | Providing and Fixing 12 mm/10mm thick Fire retardant plywood in False ceilings conforming IS 710 including providing of frame work with second class kail wood of 50mm x 37.50mm placed at 600mm c/c for cielings with necessary fittings and fixtures(cornice) incl.all carriages of material upto site |
| 30 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. |
| 31 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches duringtransportation and should be supplied in single length upto 12 metre or asdesired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete uptoany pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 32 | Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) |
| 33 | Providing and Fixing MS Grill & Railings ( Ready Made Ornamental) using angles , hollow tubes , pipe sections etc including weldinf ,Fixing in position , p/a priming coat and 2 coats of epoxy paint and all necessary fittings . Complete job. |
| 34 | Carriage of Different materials from nearest source to site of work |
| 35 | and and aggregates from avg lead of 50km |
| 36 | Carriage of Sand only avg lead 50km |
| 37 | Carriage of cement ,Steel reinforcement & CGI Sheets from market to site avg lead 50km |
| 38 | Carriage of Bricks avg lead 50km Please Enable Macros to View BoQ information |
