|
| 1 | 4-Seater See-Saw. i. FRP coated Frame and Structure (Main Frame Material):• Heavy-duty MS pipe (mild steel), ISI grade, FRP coated• Pipe thickness: 3.0 mm • Fulcrum/Base Support:• MS square/round pipe, min. 80 mm OD × 3.0 mm thickness• Pivot support with ball bearing or heavy-duty bush for smooth movement.ii. Dimensions• Overall Length: 3.0 mtr• Height at Seat Level (rest position): 600 – 750 mm• Height at Maximum Tilt: ~1.2 m• Beam Size: 80 mm OD round/rectangular pipe, thickness 3.0 mm.iii. Seats• Material: FRP (Fiber Reinforced Plastic) • Size per seat: 300 mm × 250 mm• Quantity: 4 (two on each side, facing each other)• Backrest (optional): For toddlers, height ~200 mmiv. Handles and Footrest• Handlebar: MS pipe Ø 25–32 mm, height 350–400 mm above seat• Footrest: MS rod/pipe with anti-slip rubber gripv. Load Capacity• Per Seat Capacity: 40–60 kg• Total Safe Load: ~200–240 kgvi. Safety Features• Stoppers at both ends with rubber pads to avoid sudden impact• Rounded edges and smooth powder coating (non-toxic)• Bearing/bushing enclosed for safetyvii. Age Group Suitability• 4–12 years recommended• Supervised use for younger childrenviii. Installation: - Base plates with grouting bolts in RCC foundation (min. 300 × 300 × 450 mm deep footing). Ensure minimum 2 m safe clearance zone around the see-saw |
| 2 | Arch swing: - i. FRP Coated Frame and Structure• Type: Arch frame, single bay (2-seater) • Material: ISI grade MS (mild steel) pipes.• Pipe OD (arch legs): 80 mm (min.) × 3.0 mm thickness• Top cross beam: 80 mm OD MS pipe × 3.0 mm thickness• Arch shape: Radius : 1 mtr (depending on bay width)ii. Dimensions• Height (ground to top beam): 2.6 – 3.0 m (recommended 2.8 m)• Seat clearance from ground (at rest): 350–500 mm• Distance between two swing seats (side-to-side): Minimum 600–750 mmiii. Swing Seats• Material: FRP • Type: Flat seat (for 5–12 yrs)• Size: 400–450 mm × 200–250 mm• Load capacity per seat: 80–120 kgiv. Chains / Ropes• Type: Galvanized / stainless-steel chain with plastic/rubber coating (pinch-free) as desired by Engineer in-charge • Chain thickness: 6–8 mm• Length: 1.6 - 1.8 m (adjustable for seat clearance)• Connection: Heavy-duty D-shackles or clevis connectors with anti-theft nut/bolt.v. Safety Zone and Surfacing• Impact area: At least 2.0 m front and back, 1.75 m side clearance per swing.• Fall height: 1.5 – 1.8 mvi. Load Capacity and Stability• Single bay (2 seats): Total ~200 kg• Multi-bay: Each bay must be independently anchored• Foundation: RCC footing per arch leg, size 300 × 300 × 600 mm depth with anchor boltsvii. Age Group Suitability• Toddlers (2–5 yrs): Bucket seat with harness.• Kids (5–12 yrs): Flat belt/FRP seat |
| 3 | Single Slide: - Single-lane i. FRP Coated Structure and Material• Main frame fabricated from MS (Mild Steel) tubular pipes of minimum 50 mm diameter and 3 mm thickness, conforming to ISI standards.• Supporting legs to be embedded in M-15 grade cement concrete block (1:2:4 mix) of size not less than 450 mm × 450 mm × 600 mm (depth).• Platform frame made of MS angle iron-FRP Coated (40 × 5 mm) 42 MM OD PIPE with chequered sheet/8 mm FRP sheet / for anti-skid surface.ii. Slides• Single slide made of FRP (Fiber Reinforced Plastic) • Length of slide: 2.5 m to 3.0 m (approx.) from top to bottom.• Height of starting platform: 1.80 MTR (approx.) above ground level.iii. Safety Features• Handrails made of MS pipes- FRP coated (25 mm Dia, 2.5 mm thick) provided on both sides of stairs and top platform.• Safety guard/barriers of minimum 600 mm height at the platform to prevent accidental fall.• All sharp edges, welding joints and corners to be properly ground and rounded.iv. Ladder/Stairs• Ladder made of MS pipe-FRP Coated (32 mm dia, 3 mm thick) with non-slip rungs of MS flats (25 mm × 5 mm).• Angle of inclination of ladder approx. 60° for safe climbing.v. Finishing• All MS parts to be treated with anti-rust epoxy primer and FRP coating.• FRP surface to be glossy, UV-resistant and smooth finished.vi. Load Bearing Capacity• Slide should be able to withstand a minimum load of 150 kg at any point without deformation.vii. Standards and Workmanship• The equipment must conform to IS: 9873 (Part I–III) / IS: 6661 / IS: 875 (as applicable) and international playground safety standards.Workmanship should ensure durability, stability, and child safety. |
| 4 | Double Slide:-i. FRP Coated Structure and Material• Main frame fabricated from MS (Mild Steel) tubular pipes of minimum 50 mm diameter and 3 mm thickness, conforming to ISI standards.• Supporting legs to be embedded in M-15 grade cement concrete block (1:2:4 mix) of size not less than 450 mm × 450 mm × 600 mm (depth).• Platform frame made of MS angle iron (40 × 40 × 5 mm) 42 MM OD PIPE with chequered sheet/8 mm FRP sheet / for anti-skid surface.ii. Slides• Double slide made of FRP (Fiber Reinforced Plastic) • Length of slide: 2.5 m to 3.0 m (approx.) from top to bottom.• Width of each sliding chute: 450-500mm MTR.• Height of starting platform: 1.80 mtr (approx.) above ground level.• Both slides should be properly curved and smooth finished to ensure safe sliding.iii. Safety Features• Handrails made of MS pipes- FRP coated (25 mm Dia, 2.5 mm thick) provided on both sides of stairs and top platform.• Safety guard/barriers of minimum 600 mm height at the platform to prevent accidental fall.• All sharp edges, welding joints and corners to be properly ground and rounded.iv. Ladder/Stairs• Ladder made of MS pipe-FRP Coated (32 mm dia, 3 mm thick) with non-slip rungs of MS flats (25 mm × 5 mm).• Angle of inclination of ladder approx. 60° for safe climbing.v. Finishing• All MS parts to be treated with anti-rust epoxy primer and FRP coating.• FRP surface to be glossy, UV-resistant and smooth finished.vi. Load Bearing Capacity• Slide should be able to withstand a minimum load of 150 kg at any point without deformation.vii. Standards and Workmanship• The equipment must conform to IS: 9873 (Part I–III) / IS: 6661 / IS: 875 (as applicable) and international playground safety standards.• Workmanship should ensure durability, stability, and child safety. |
| 5 | Climber :-i. Material FRP coated • Main frame: Mild Steel (MS) pipes of minimum 40 NB / 48 mm outer diameter, thickness 3 mm, conforming to ISI standards.• Climbing elements: High-strength steel pipes, Fasteners: M.S bolts, nuts, and washers with anti-rust coating.ii. Surface Finish• All MS components to be FRP coated with weather-resistant, non-toxic paint.• Welded joints properly ground and treated with anti-corrosive primer before painting or coating.iii. Dimensions (example for arch/net climber, modify as required)• Height: 2.0 – 2.5 meters.• Width: 1.5-2.0 mtr • Safe spacing between climbing bars: 250-350 mm.iv. Safety Features• All edges and corners to be rounded (no sharp edges).• Fall height should comply with IS 9873 (Part 9): Safety Requirements for Playground Equipment.• Rope joints/knots with galvanized clamps and protective sleeves.• Anchoring to be done with RCC foundation blocks (1.5 ft x 1.5 ft x 1.5 ft) using grouted bolts.v. Load Bearing Capacity • Minimum 100 kg per user, tested for at least 250 kg total load.vi. Standards Compliance• IS 9873 (Safety of Toys and Play Equipment).• EN 1176 (International Playground Equipment Safety Standard) where applicable.vii. Installation• Installation as per manufacturer’s guidelines.• RCC foundation cured for minimum 7 days before usage.viii. Maintenance• Annual inspection for structural stability.• Repainting and tightening of nuts/bolts every 12 months. |
| 6 | Six-Seater MGR i. FRP coated Material and Construction:• Main Frame: Made of heavy-duty MS (Mild Steel) pipes/tubes, minimum 48 MM OD PIPE Top and Bottom Plate: MS plates, minimum 3.0 mm thick, precision cut and welded.• Arms: Six FRP coated arms made of MS pipe (minimum 32 mm dia, 2.6 mm thick), equally spaced.• Seating Arrangement: Six ergonomically designed FRP (Fiberglass Reinforced Plastic) seats with back support, UV resistant, weatherproof, and anti-crack finish.• Central Shaft: MS solid shaft of 45-50 mm dia with double ball bearings for smooth rotation.• Bearing Housing: Heavy-duty cast iron/steel housing with dust-proof cover.• Footrest: Provided for each seat, made of MS rod 27 mm dia.ii. Dimensions (Approx.):• Diameter of Ride: 1.8 to 2.0 mm • Seating Capacity: 6 children (age group 5–12 years)• Height: 0.6 m – 0.75 m (from ground level to seat level)iii. Finish• All MS parts to be sandblasted, treated with anti-rust primer, and FRP-coated with multi-color finish.• FRP seats in bright, attractive child-friendly colors.iv. Safety Features• Rounded edges, no sharp corners.• Safe rotating speed due to self-regulated design.• Anti-skid footrest.• Bearing assembly fully covered for child safety.v. Installation:• Foundation with 1:2:4 RCC concrete blocks (minimum 400 × 400 × 600 mm), as per manufacturer’s design.• Installation to be done with proper grouting and alignment. |
| 7 | Multi Play Station: -i. General Structure• The Multi Play Station shall be modular in design and suitable for outdoor use.• Structure shall be designed for 25–30 children at a time, aged 5–12 years.ii. Material• Main Frame with FRP Coated: Mild Steel (MS) tubular sections, minimum 90,75,48,34, mm dia, 2.5 mm thick, FRP coated.• Platforms: Made of FRP (Fiber Reinforced Plastic) with anti-skid design.• Slides: FRP with smooth finish, minimum thickness 6 mm.• Climbing Frames: MS/FRP with anti-slip grips.• Roof/Canopy: FRP with UV-stabilized coating.• Fasteners: Galvanized / PLATING MS BOLT / SS bolts/ with safety caps.iii. Activities/ComponentsCovering Area: 44` L X 22` WIt contains: • FRP Spiral Slide 6mm thick inclined at 5` H - 1 no• FRP Tube Slide inclined at 5’ H - 1 no• FRP Bowl slide 6mm thick with FRP Entry Gate inclined at 3` H - 1 no• FRP Wave slide 6mm thick inclined at 5’ H - 1 no• FRP Stair 3mm thick inclined at 3`H-1 no• FRP Platform Hex. Shape 5mm thick in 7` Dia-2 no.• FRP ??n???-2 no.• FRP Diamond shape with MCF wording Engraved on canopy-2 n?.• FRP Fancy Railing Frog and Monkey Shape-4 no.• FRP Walking Bridge 7.5` Long-1 no.• M.S Spring Climber - 1 no.• M.S Zig-Zag Climber - 1 no• M.S Chain Net Climber - 1 no• M.S Climbing Ladder - 1 no• M.S Station in which vertical MS pipe-FRP Coated is of 3 `12 Guage of 1.S.I Mark-2 no• Parent–Child Face-to-Face Swing: - It allows an adult and a child to swing together, facing each other, on a single moving frame- Heavy-duty MS FRP Coated structure, ISI grade, FRP coated for corrosion protection. Pipe OD 75 mm (min.) × 3.0 mm thickness. Approx. L 10’ × W 6’ × H 8.5’. Dual-seat assembly with pivot arms that keep the adult and child seats facing each other. Heavy-duty bearings or self-lubricating bushes for smooth motion. Full-bucket seat with safety belt (infant/toddler) or FRP half-bucket for older children. Enclosed pivot hardware, anti-wrap bearings, rounded edges. Foundation with 1:2:4 RCC concrete blocks (minimum 400 × 400 × 600 mm), as per manufacturer’s design. Installation to be done with proper grouting and alignment-1 no.iv. Dimensions (Indicative – may vary slightly as per design)• Overall, Area: Minimum 44’ L x 22’ W • Platform Height: 4 ft.• Slide Length: 8–10 ft (2.5–3 m).• Tunnel Diameter: Minimum 650 mm.v. Safety Features• No sharp edges, corners rounded.• Safety guardrails (minimum 900 mm high) at all elevated platforms.• Adequate spacing between activities to prevent collision.• All equipment installed over soft ground/rubber flooring/sand bed.vi. Finishing• FRP coating / PU PAINT with non-toxic, lead-free colors.• FRP to be UV-stabilized, weather resistant.• Minimum 2-year warranty against rusting and color fading. |
| 8 | Fire Station Climber: -i. Structure and Material• Main Frame: Heavy-duty MS (Mild Steel) pipes of minimum 48 mm OD, 2.5 mm thick, FRP-coated / PU PAINT for rust resistance.• Platforms and Panels: 3.0 mm thick MS sheet with anti-skid surface, FRP-coated.• Fasteners: PLATING bolts, tamper-proof, with plastic caps.• SEATING: FRP (Fiber Reinforced Plastic) fire-station theme seat for 8 children in bright red with fire station logo.ii. Dimensions• Height: 2.0-2.4 m (depending on design).• Length: Approx. 2.5-3.5 m.• Width: 1.5-2.0 m.• Platform height: 1.2 m – 1.5 m.iii. Components• Fireman’s Pole: Vertical GI/MS pipe of 50 mm OD, FRP-coated.• Bridge (optional): Rope/metal bridge connecting two platforms.• Themed Panels: Fire station decorative FRP panels with cut-outs for windows/doors.• Wheel: 4 wheels, dia: 15-18 inch iv. Safety Features• All edges rounded and smooth for child safety.• Minimum 2 feet clear space around the climber for safety zone.• Compliant with IS 9873 (Part 1, 2 and 3) and EN 1176 safety standards for playground equipment.• No sharp projections or hazardous entrapments.v. Finishing• FRP coating / pu paint non-toxic and weather-resistant.• FRP parts: UV stabilized, fade-resistant, child-safe paints.v. Capacity• Suitable for 6–8 children at a time, age group 5–12 years. Expenditure for Water Supply connection From D.H.B.V.N Please Enable Macros to View BoQ information |
