Tender For Proposed Area Office Moradabads Building At Industrial Estatae Parsakhera District -Bareilly, Moradabad-Uttar Pradesh

TDR : 55050468

Tender Notice
BOQ

6 Days Left

Moradabad , Uttar Pradesh

Tender Brief : Tender For Proposed Area Office Moradabads Building At Industrial Estatae Parsakhera District -Bareilly

Document Fees
₹ 4602 /-

EMD
₹ 195000.0 /-

Tender Value
₹ 1.91 Crore /-

Submission Date
20-04-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil
2	Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
3	Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
4	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
5	Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
6	Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement:2 coarse sand) to match the existing floor.With Chlorpyriphos/ Linadane E.C. 20% with 1% concentration.
7	Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of Concrete of M25 grade with minimum cement content of 330 kg /cum
8	All works above plinth level upto floor V level
9	Slab-All works above plinth level upto floor V level
10	All works upto plinth level (BEAM)
11	All works upto plinth level FOOTING
12	All works upto plinth level (COLUMN)
13	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand)
14	Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size).
15	Painting on D.P.C. with two coats of airblown bitumen 85/50 or 85/25 @ 1.7 kg/sqm approx. including cost of fuel if any.
16	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)
17	Ground Floor
18	First Floor
19	Second floor
20	Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand)
21	Ground Floor
22	First Floor
23	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
24	Ground Floor
25	First Floor
26	Second floor
27	15 mm cement plaster on rough side of single or half brick wall of mix:1:6 (1 cement: 6 coarse sand)
28	Ground Floor
29	First Floor
30	Second floor
31	12 mm cement plaster of mix :1:6 (1 cement: 6 coarse sand)
32	Ground Floor
33	First Floor
34	Second floor
35	15 mm cement plaster on rough side of single or half brick wall of mix : 1:4 (1 cement: 4 coarse sand).
36	Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building allcomplete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by theEngineer-in-Charge Polished Granite stone slab of colour Black, Cherry/RubyRed or equivalent.(FLOORING)
37	Providing and laying Vitrified tiles in floor in different sizes (thickness to bespecified by the manufacturer) with water absorption less than 0.08% andconforming to 1S:15622, of approved brand & manufacturer, in all coloursand shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarsesand) jointing with grey cement slurry @3.3 kg/sqm including grouting thejoints with white cement and matching pigments etc. The tiles must be cutwith the zero chipping diamond cutter only . Laying of tiles will be donewith the notch trowel, plier, wedge, clips of required thickness, levelingsystem and rubber mallet for placing the tiles gently and easily. Glazed vitrified floor tiles polished finish of size 600X1200
38	Ground Floor
39	First Floor
40	Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade. (skirting)
41	Ground Floor
42	First Floor
43	Second floor
44	38 mm thick wood block flooring of first class teak wood laid over 25 r thick leveling layer of cement concrete 1:2:4 (1 cement: 2 coarse sa 4 graded stone aggregate 10 mm nominal size) to be paid separate coated with a thin layer of hot bitumen penetration 80/25 (blown typ @2.45 kg per sqm, including fixing blocks in position after dipping hot bitumen (blown type) up to half depth, planed, levelled smooth a finished complete
45	Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS: 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete.
46	Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth
47	Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:(a) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. Single leaf.
48	Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coate.
49	Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
50	Fixing with carbon steel galvanised dash fastener of requireddia and size (to be paid for separately)
51	Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm overand including one coat of Special primer applied @ 0.75 ltr /10 sqm
52	Ground Floor
53	First Floor
54	Second Floor
55	Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @2.20kg/10 sqm)(Outer surface)
56	Ground Floor
57	First Floor
58	Second Floor
59	Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm overand including one coat of Special primer applied @ 0.75 ltr /10 sqm (For ceiling surface)
60	Ground Floor
61	First Floor
62	Second Floor
63	Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
64	Ground Floor
65	First Floor
66	Second Floor
67	Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete.
68	Providing and fixing Stainless steel 304 grade sliding door bolts, of 16mmx250mm solid rod with required nuts, screws, keeper, etc. all item to s.s. 304 grade only and supplied along with material test certificate. (OZ-ALD-01(16x250mm)
69	Providing and fixing Stainless steel 304 grade tower bolts (barrel and plate type) with required nuts, screws, keeper, etc. all item to s.s. 304 grade only and supplied along with material test certificate.
70	(a) 300 mm x 10mm -(OZ-TB-S-12\\" )
71	(b) 250 mm x 10mm (OZ-TB-S-10\\" )
72	Providing and fixing Stainless steel 304 grade handles with plate fixed with S.S. screws,etc. complete of size 10mm 125mm all item to s.s. 304 grade only and supplied along with material test certificate. (ODG-11-10x125)
73	Providing & fixing EN:1154 Certified 500000 cycle tested door closer made of Aluminium Diecasted body having UL stamping sutable for 80kg with double speed adjustment with necessary accessories and screws etc. Complete. (NSK-680)
74	Construction of drain alongwith apron.
75	Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety
76	Providing and fixing in position using proprietary make JEB/Hindalco/Armstrong or equivalent (SAPPHIRE ALUMINIUM PRODUCTS ) Aluminium fully glazed sliding folding doors made in 12mm thick toughened glass panels held in position as per the detail drawings inclduign the cosrt of all necessary fitting and fixtures required. The edges of the all glass panels shall be machine polished. The glass joints shall be of butt/Champhered type and finished with non staining servex seal as approved by the Architect.
77	Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flangen of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, thesection and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board
78	Centering and shuttering including strutting, propping etc. and removal of form for :
79	Foundations, footings, bases of columns, etc. for mass concrete
80	Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick
81	Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick
82	Columns, Pillars, Piers, Abutments, Posts and Struts
83	Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge.
84	Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished seamless type tubes
85	Providing and fixing roofing consist of 0.8 mm thick galvanized steel deck sheet confirming to IS 277:1992 used as permanent shuttering over which MS wire mesh 3 mm laid at 100x100 mm grid including edge trim covered with concrete. This metal deck will be supported on structural steel beam with shear studs. (Structural steel like Beam, column, joists etc. & concrete of different grade as per design will be paid separately).
86	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade.Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture : (M.S. works).
87	Providing & fixing (S.S Railing with glass,) — Side mounted, supply and installation of mobel make or equivalent, SS 304 grade 900mm high railing made of SS 304 grade handrail pipe of 50mm OD and 1.6mm thickness polish with automatic round polishing machine to get a uniform hairline finish K240 mounted with help of adjustable solid neck support on balustrade of approved design at 900mm centre to centre, (or actual division as per site conditions), fitted with four Nos, solid glass connectors for holding the infill glass of 12mm, thick toughened and laminated, glass connector to be nutted with balustrade with the help of s.s screw overall mounted on s.s 304 grade solid base plate 100mm x 8mm with the help of dash fastners as approved by Architect in charge(HILTI/FISCHER/OZONE or equivalentmake).
88	Providing and fixing openable swing Glass Door with 6-12mm Toughened glass frameless including fixing and adjustment of hinges bolts, locks, handles, springs fittings etc complete as approved by Architect in charge
89	Providing and fixing fittings and fixtures for double swivel Pivot doors including Concealed/ Invisible Ceiling Plate, Top Pivots, Bottom Pivot and Floor Plate Outdoor with Mounting Package (Allen wrenchFitting template, 3. Fitting adhesive, 4. Adjustment spanner) or with double action Floor Spring SS grade 304
90	Water proofing.
91	Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations :a) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge.
92	Providing and mixing integral crystalline admixture for water proofing treatment to RCC structures like basement raft, retaining walls, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc. at the time of transporting of concrete into the drum of the ready-mix truck, The product performance shall carry guarantee for 10 years against any leakage.
93	Providing and fixing white viterous china extended wall mounting water closet(WC) of size 780x370x690mm of approved shape including providing & fixing white china cistern with dual flush including fitting, of flushing capacity 3/6 ltr (adjustable to 4/8 ltrs), including seat cover and cistern fittings, nuts, bolts and gasket, SS Flush Plate etc complete.
94	Providing & fixing white vitreous china Under Counter wash basin with C.I. brackets painted white, with rubber plug, 32mm C.P. brass waste of standerd pattern including cutting & making good the walls wherever required.a)White Vitreous China Wash basin size (609x410x167)mm .
95	Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible Pipe 40 mm dia
96	Providing and fixing bevelled edge mirror of superior quality glass, size 600×600 mm (VIP standard), 6 mm thick, fixed over 6 mm thick hard board backed with wooden cleats, including C.P. brass screws and washers, complete as required.
97	Providing and fixing Stainless Steel AISI 304(18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherrerever required.Kitchen sink with drain board Size 510x1040 mm bowl depth 225 mm.
98	Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 680 x 305 x 350 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.
99	Providing and fixing stone slab table rubbed, edges rounded and polished of size 75x50cm deep and 1.8cm thick fixed in Urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1cement: 2coarse sand: 4graded stone aggregate 6mm nominal size) as per direction of Engineer-in-charge and finished smooth.Granite Stone of approved shade
100	Providing and fixing unplasticised PVC connection pipe with brass unions.45 cm length 15 mm nominal bore
101	Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean & Wall moutain type W.C. of quality and make as approved by Engineer - in - charge.(Health Faucet).
102	Providing and fixing C.P. brass two way bib cock of approved quality conforming to IS:8931.a) 15 mm nominal bore
103	Providing and fixing factory-made bath tray of size according to toilet, made of glass/plastic/water proof material (as specified), minimum thickness 4–8 mm (acrylic/FRP) or 15–20 mm (ceramic), anti-skid finish, with 75/90 mm drain outlet, including bedding in cement mortar 1:4, proper leveling, accessories complete as per specifications and direction of engineer-in-charge.
104	Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS:8931. a) 15 mm nominal bore
105	Central Hole waste coupling without Popup Waste System with 32mm full thread .
106	Providing and fixing basin diverter mixer wall mounted basin mixer upper trim with concealed body.
107	Sink Mixer with Swinging Spout (Table Mounted Model) with 450mm Long Braided Hoses .
108	Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
109	Providing and fixing SS liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
110	Providing and fixing SS towel ring
111	Providing and Fixing SS Toilet Paper Holder.
112	Providing and Fixing soap dish holder.
113	Providing and Fixing double coat hook.
114	Providing and fixing 600x12x5 mm glass shelf with edges round off supported on anodised aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40mm long screws, rawl plugs etc. complete.
115	Supply and installation of grab bar for toilet made of high-quality stainless steel Grade SS 304, 32 mm to 38 mm diameter, seamless pipe with minimum 1.2 mm thickness, having satin/matt finish, corrosion-resistant and easy to clean, complete with concealed wall mounting flanges, stainless steel screws, rawl bolts and all necessary fittings. Grab bar shall be wall mounted / angle / straight / L-shaped / U-shaped as specified, capable of withstanding a minimum load of 150 kg, installed at required height as per CPWD / NBC / Accessibility guidelines, fixed firmly on RCC or brick wall with proper backing support, including cutting, making good the wall surface, testing and making the installation fully functional, complete in all respects.
116	Supply and installation of hinged support rail for toilet made of heavy-duty stainless steel Grade SS 304 (SS 316 for coastal or high-corrosion areas), 32 mm to 38 mm diameter seamless pipe with minimum 1.2–1.5 mm wall thickness, finished in satin/matt anti-slip finish, complete with nylon or rubber hand grip sleeve (where specified). Hinged rail shall be foldable (up/down movement) with smooth action, equipped with locking or friction hinge mechanism to hold position, and provided with concealed wall fixing flange using stainless steel fasteners, anchor bolts and necessary backing plates. The rail shall be capable of supporting a minimum load of 150 kg, installed at required height and orientation as per NBC / CPWD / Accessibility norms, including all accessories, cutting, making good the wall surface and testing, complete in all respects.
117	Providing, laying and fixing UPVC Silent drainage pipes (Astral Silencio or equivalent approved make), conforming to manufacturer’s specifications, complete with rubber ring joints / solvent cement joints, including all fittings, clamps, cutting, testing, jointing and making good walls, floors and ceilings etc., complete as required.c). 160 mm dia UPVC pipe
118	Providing and fixing PVC pipes complete with all fittings and clamps, including cutting and making good walls etc. ( for wash basin waste ).32mm dia nominal bore
119	Providing and fixing rubber ring coupling / joint for uPVC Silent drainage pipe (Astral Silencio or equivalent), complete with EPDM rubber gasket, bolts if required, cutting and fixing etc., complete..110 mm dia
120	Providing and fixing MS/SS pipe clamps for uPVC Silent drainage pipes (Astral Silencio or equivalent), fixed to wall/ceiling with rawl bolts, including all accessories and making good the surface, complete.a). for 110mm dia pipe
121	Providing and fixing uPVC Silent floor trap with SS jali, self-cleansing type, complete with outlet connection to Silent drainage pipe system (Astral Silencio or equivalent), including cutting, fixing and making good, complete.
122	Providing and fixing uPVC Silent plain bend of required degree (87.5°, 45° or as required), for Silent drainage system (Astral Silencio or equivalent), including rubber ring joint/solvent cement joint, cutting, fixing and testing etc., complete.
123	a). 110mm
124	Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. (Y Bend with Door) cast (spun) iron cast (spun) iron material epoxy coated inside & outside IS:15905 110x110x110mm
125	75x75x75mm
126	Providing and fixing uPVC Silent single equal plain junction (Y-bend), three-socket type, of required angle, without access door, for Silent drainage system (Astral Silencio or equivalent approved make), complete with rubber ring joints / solvent cement joints, including cutting, fixing, testing and making good walls and floors etc., complete as required. (Plain Y Bend) 110x110x110mm
127	75x75x75mm
128	Providing and fixing uPVC Silent door piece / access piece with rubber ring joint, bolts and nuts, for Silent drainage system (Astral Silencio or equivalent), including cutting and making good, complete. (C.O.P.)a) 75mm
129	b) 110mm
130	Providing and fixing uPVC terminal guard / grating for Silent drainage pipe (Astral Silencio or equivalent), including fixing and making good, complete.100 mm
131	75 mm
132	Providing and fixing on wall face unplasticised-Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion.
133	110 mm
134	Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion.
135	Coupler
136	Bend 87.5 degree
137	110 mm Bend
138	110 X 110 X 110 mm
139	Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
140	Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete.
141	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge.Concealed work including cutting chases and making good the walls etc.
142	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.32 mm
143	25mm dia nominal bore
144	Gun metal valve
145	80mm dia nominal bore
146	Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :20 mm
147	25 mm nominal bore
148	Cost of Septick tank and sock pit
149	Earth work in exacavation in trenches for foundations and for pipes cables etc. in ordinary soil(loam clay or sand) including lift upto 1.5 m and dressing of sides and ramming of bottom sand disposal of surplus excavated earth as directed by the Engineer i/c with in a lead of 50m.
150	In all kind of soil upto 1.5m depth
151	In all kind of soil upto 1.5m to 3.0m. depth
152	Class M-150 brick work in 1:4 cement coarse sand mortar in foundation & plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work.
153	Reinforcement cement concrete work in RCC culvert slab with 1:1.5:3 (1 cement : 1.5 coarse sand and 3 gradded stone aggregate of 20 mm nominal size) excluding centering and shuttering and reinforcement.
154	Providing & Fixing Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
155	12mm cement plaster on rough side of single or half brick wall mix
156	1:3 (1 cement : 3 Coarse sand)
157	Providing M.S. foot rests including fixing in manoholes with 20x20x10 cm cement concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per standard design:With 20x20mm square bar
158	Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality.M.D. -10- Circular shape 500mm internal diameter
159	Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level.
160	Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.150 mm nominal size dia
161	Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
162	Supplying, filling, spreading & leveling coarse sand of size range 1.5mm to 2 mm in recharge pit, in required thickness over gravel layer,for all leads & lifts, all complete as per direction of Engineer -incharge.
163	Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction ofEngineer-in-charge.
164	DESILTING CHAMBER Earth work in exacavation in trenches for foundations and for pipes cables etc. in ordinary soil(loam clay or sand) including lift upto 1.5 m and dressing of sides and ramming of bottom sand disposal of surplus excavated earth as directed by the Engineer i/c with in a lead of 50m.In all kind of soil upto 1.5m depth
165	In all kind of soil upto 1.5m to 3.0m. depth
166	Providing and laying in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded Stone aggregate 20 mm nominal size) and curing complete,including cost of form- work,in foundation and floors.
167	Class M-150 brick work in 1:4 cement coarse sand mortar in foundation & plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work.
168	Reinforcement cement concrete work in RCC culvert slab with 1:1.5:3 (1 cement : 1.5 coarse sand and 3 gradded stone aggregate of 20 mm nominal size) excluding centering and shuttering and reinforcement.
169	Providing & Fixing Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
170	15mm cement plaster on rough side of single or half brick wall mix 1:3 (1 cement : 3 Coarse sand)
171	Providing M.S. foot rests including fixing in manoholes with 20x20x10 cm cement concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per standard design:With 20x20mm square bar
172	Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality.M.D. -10- Circular shape 500mm internal diameter
173	Excavating trenches in all kinds of soil of required width for pipes. including excavation for sockets and dressing of sides, ramming of bottoms, including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc & disposing of surplus excavated soil as directed within a lead of 50m. up to 1.50 m depth Pipes 80 mm to 300 mm diameter
174	Providing and laying Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints etc. complete.
175	150 mm. dia. RCC Pipes
176	250 mm. dia. RCC Pipes
177	Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) upto the haunches of pipes including bed concrete as per standard design 150 mm. dia.
178	Constructing brick masonry INSPECTION chamber 60x60x75 cm with bricks of class designation 50 in cement mortar 1:4 (1 cement : 4 coarse sand) including CI cover with frame LIGHT WEIGHT complete as per design. With FPS bricks
179	Constructing brick masonary open surface drain with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 fine sand) including earth excavation, 10cm thick bed concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and 25mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size) for filling haunches including 12mm cement plaster 1:4 (1 cement : 4 coarse sand ) with a floating coat of neat cement inside the drain, its top and exposed side including disposal of surplus earth complete as per standard design:
180	Drain 300 wide average. Depth 45 cm with R.C.C. slab
181	Drain 450 wide average. Depth 45 cm with R.C.C. slab
182	Providing & fixing G.I. pipes complete with G.I. fittings including tenching and refilling etc. (external work)
183	65mm nominal bore. (drainage pump discharge pipe)
184	COST FOR HORTICULTURE
185	Development of CC Road
186	Development of Stamped Concrete Pathway
187	Supply Installation Testing & Commisionning of Passive 2 way bass reflex,TRANSDUCER COMPLEMENTS: LF 1 x 4\\" woofer POWER TAPS 100V - 2.5W, 5W, 10W, 20W (Make -Bose , Sonodyne , Bosch )
188	Supply Installation Testing & Commisionning of Mixer Amplifiers, now featuring 2 channels of priority VOX muting, integrated tone generator, OUTPUT POWER PER CHANNEL -250 watt, FREQUENCY RESPONSE - 40Hz - 20kHz, OUTPUT MODE - 4 Ohm- 100V , THD+N < 0.2%, INPUT CHANNELS - 4 MIC or Line, SIGNAL TO NOISE RATIO >80dB, INPUT SENSITIVITY -MIC: 1.2mV - Line: 160mV (Make -Bose , Sonodyne , Bosch)
189	Supply Installation Testing & Commisionning of Supply of Bosch Chairman unit with built in flexible gooseneck mike length 318 mm , press to talk button, priority switch, 2 headphone sockets with rotary volume control and microphone with light ring LED , Loudspeaker volume is set centrally at the Control Unit for all delegate units.To prevent acousticfeedback, the built-in loudspeaker is automaticallymuted when the microphone is on.. Unit has 1 x 2.7 m (106.3 in) cable terminated with a 8-pinmale connector for loop-through connection to other.• 1 x 8-pin circular female connector for loop-through connection to other delegate or chairman units.• 2 x 3.5 mm (0.14 in) stereo headphone sockets.
190	Supply Installation Testing & Commisionning of Supply of Bosch CCS 700 Delegate unit with built in flexible gooseneck cardiode mike length 318 mm , press to talk button, built in speaker ,Microphone ON / OFF or request to speak button , 2 headphone sockets with volume control complete as above but with out priority
191	Supply Installation Testing & Commisionning ofBosch CCS 700 controller suitable for up to 50 units having built in 3 band Equalizer Audio interfaces for connecting external audioEquipments. The controller supports almost any kind of small or medium meeting. For business discussions and small conferences. Unit has built in audio recorder & amplifier . Recording on SD card or USB . Head phone input & volume control for mic 1 & 2 . Freq 80 to 18000 Hz, rated output power 30 watt . SNR > 50 dB
192	Supply Installation Testing & Commisionning of 6 channel mixer (Make - Yamaha ,Sonodyne , JBL )
193	Supply Installation Testing & Commisionning of Sonodyne wireless microphones dual channel with one hand held & one lapel mike , carrier freq range 865-867MHz, S/N ratio > 105dB, Freq response 40 to 18000 Hz, sensitivity-105dB, working distance > 150feet (Make - Shure , Sonodyne , Bosch )
194	Supply Installation Testing & Commisionning ofBosch Gooseneck microphone condenser type unidirectional with flexible stem, phantom powered, voltage range 12- 48 Volts, sensitivity 2.5 mV/pascal, Freq 100 to 16000 Hz, output impedance < 200 Ohms. With Ahuja small stand Range(250ft) in optimal conditions Modultion : GFSK with TDMA, voltage 3.7 . (Make - Shure , Sonodyne , Bosch )
195	Supply Installation Testing & Commisionning of 2 core sheilded microphone wire. MICROPHONE CABLE 2 CORE +SHIELDED 19/0.12 OFC+ PVC 2C + COTTON YARN 06 MM(Make - Crystal , felcon , belden )
196	Supply Installation Testing & Commisionning of 2 core x 1.5 sq mm speaker wire (Make -oxycraft , felcon , delden )
197	Supply Installation Testing & Commisionning of 18U Equipment for backend system forEquipment Rack (Make - Comrack , Valrack , Legrand )
198	Supply Installation Testing & Commisionning of 75 \\" display 440 nits Brightness, Smart Android OS, 4K UHD Resolution, 24*7, Screen Mirroring through Airplay/Chromecast, Direct LED, 16 Gb storage, Wi-Fi, 178 Degree Viewing Angle, Landscape/Portrait/Tilt Installation, IP/RS232C Control, 10W+10W Speakers, HDMI 2.1 (4), USB (2), Power Scheduling, 1200:1 Contrast Ratio, Color Gamut (DCI-P3) 92%, HDMI Auto Wake up. 4K HDR Visual Experience through 4K HDR Processor X1, 4K X-Reality PRO, Triluminos PRO, Motionflow XR, HDR10/HLG/Dolby Vision (SONY)
199	Extra for Acoustical Panelling on one side
200	9mm acoustical panel to be stuck on 3mm thick ply or(SOFT BOARD), as required. Colour of the Acoustical panel to be as approved by architect. Cost to include wastage and to be complete as per design show by the architect.Extra for Fabric Panelling Finish on one side
201	over item no E.6 above for providing fabric paneling finish to one side of partition, instead of gypsum, including providing grooves and divisions in panels as per Architects elevations. Fabric to be mounted on backing panel of 12 mm thick cellotex (SOFT BOARD), intermediate grooves to be finished with fabric lining. Cost to include grippercost. Fabric to be selected by the Architects with a base rate of 2300/ RM.Sq.MExtra for Duco Finish On One Side
202	9mm acoustical panel to be stuck on 3mm thick ply or as required. Colour of the Acoustical panel to be as approved by architect. Cost to include wastage and to be complete as per design show by the architect.Acoustical paneling
203	Form paneling as per E.23 above but faced front sidewith 12 mm thick ply or as required and finished with 1 mm thick laminate as perarchitect’s approval. Provide for 10 mm x 10 mm or 4mm X 4mm grooves as perdetail drawings, finished in laminate as specified by Architect.Sq.MAluminium Skirting
204	Fabricating and fixing 50 mm High Aluminium skirting with al. strip cover over partition & pop surface. Providing and fixing 1.0 to 1.5mm thick 50mm high extruded anodized aluminium skirting as per manufacture spec with Aluminium Capping. Contractor to ensure ply backing w/o additional cost for fixing of the skirting. Corners to be buffed to Chamfer Details and to be installed neatly without Corner capping. As per Architect Approval(Bottomline: Make)PelmetRM.
205	kitchen partition Laminated
206	Low Height Storage: Laminated Form low height storage of 750 mm height and 400-450mm deep and 750mm height as per details and specifications of item no F.1 above but with the top and side surfaces also finished with Laminated finish as per Approved Colour and shade. Shutter/. Shutters toincorporate 10mm SS groove at locations as specified. Provide 1 adjustable shelf.Numeric locks with manual overideSq.M
207	Fabricate and installstorage module under counters in toilet/pantry or under worktop counters.Shutters of storage unit to be formed out of 19 mm thick Marine Grade ply andfaced with 1 mm thick laminate (Plain). Shutters to be finished with Laminate)and hung on concealed Hettich hinges. Provide one shelf, made of 19 mm thickMarine grade ply, polished to architect’s approval. Complete with all necessaryfittings like hinges, ball catchers, tower bolts, locks, handles, and adjustableshelves etc. as per directions of Architect. All Internal Surfaces shall be Finishedwith Ceramic Tiles as per Item B.1.H.22. Cupboard depth of 650‐ 800 mm.Sq.M
208	Fire Signage -largeProviding and Installing Double sided Glow signs‐ fire exitand directional signage – of GEO/GLOLITE make at locations indicated by Architectincluding all exit points and directional signage. Size of Glow signage to be 300mm x 100 mm.Nos.
209	Providing and installing fire evacuation plan in A3coloured print sandwiched on acrylic & mounted on SS studs.Nos.
210	Logo small size
211	Fabricate and install corporate logo as per companysupplied artwork. Logo to be in 15/18mm thk 3 D Acrylic/ MDF Letter cuts 3 DLetter cuts. Signage of owner’s Logo, powder coated Typeface etc. as required.Overall size of the logo to as per height of 200mm.Interior Signage - WashroomsPS
212	Provide and install 3D cut outs as internal signage for toilets and pantry. Signage to be in SS finish. Overall size of 150 mm x 150 mm approx.Nos.Interior Signage - Other Rooms
213	Provide and install internal signage for meeting Rooms of 150x150mm approx. and finished in SSNos.Frosting Film on Glazed Partitions & Doors
214	Provide and apply 3M make frosting film, sparkle finish, on glazed partitions doors etc. in patterns as provided by the Architects. 5yr Warrenty. Sq.MSS Strip Carpet Protection
215	P&F T angle Aluminium anodized strip at all junctions points between hard floor and carpet. Make: Bottomline.RMM Vinyl Graphic
216	Urinal Partition Each urinal to also be provided with 10mm thk toughened glass partition with frosting film as approved of approx size 450mm width and 1500mm height fixed to wall with SS brackets or details for fixing as per detail drawing, at appropriate intervals. Partition to be fixed at appropriate ht.
217	SUB-HEAD - I : INTERNAL WIRING Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as requiredGroup - C
218	Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
219	Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required Group -C
220	Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
221	2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
222	2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
223	2 X 4 sq. mm + 1 X 4 sq. mm earth wire
224	2 X 6 sq. mm + 1 X 4 sq. mm earth wire
225	4 x 10 sq.mm + 2 x 6 sq.mm. earth wire
226	4 x 16 sq.mm + 2 x 6 sq.mm. earth wire
227	Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 amps modular switch, connection etc. as required.
228	Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
229	Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \\"C\\" curve including connections, painting etc. as required.
230	Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required
231	Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required
232	Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.
233	Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.
234	Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.
235	Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe, 15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)
236	Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required
237	Extra for fixing the Louvers/ shutters complete with frame for exhaust fans of all sizes.
238	Supply of Recess Square LED Downlight 24W Height 65 mm , suitable for 24Hr Continuous Operation, 3000-6 system lumens, 100lm/W, PF>0.95, THD <10% at full load, CRI>80, Avg Life Class 50000Hrs @L70, complete in all respect.
239	Supply of LED 4ft Batten with a nominal system lumen output of 2000 lumens and a minimum system efficacy of 100 lm/W. The luminaire shall have a rated system lifetime of 25,000 burning hours at L70. The luminaire should have a color temperature of 4000K and CRI>80. The luminaire shall meet IP20 rating with THD < 10% and PF > 0.9. The luminaire housing should made of extrusion Al with a PC diffuser. The total power consumption should not exceed 21W (including driver).
240	Supply of Recess mounting round 6 Watt 10 Watt , LED Down Lighter, suitable for 24Hr Continuous Operation, 660-1100 system lumens, 100lm/W, PF>0.95, THD <10% at full load, CRI>80, Avg Life Class 50000Hrs @L70, complete in all respect.
241	Supply of Recess mounting round 18 Watt , suitable for 24Hr Continuous Operation, 100lm/W, PF>0.95, THD <10% at full load, CRI>80, Avg Life Class 50000Hrs @L70, complete in all respect.
242	Supplying of Bulkhead type light fitting complete with, wire guard, holder, electronic ballast 1 x 10 W lamp including connections etc.Including connection with 1.5 sqmm FRLS PVC insulated copper conductor as required.
243	Supplying of LED mirror light luminaire with 10W watt complete with electronic ballast, lamp including connection etc. complete as required, Including connection with 1.5 sqmm FRLS PVC insulated copper conductor.
244	Supply of LED Flood light 50 Watt , suitable for 24Hr Continuous Operation, 110lm/W, PF>0.95, THD <10% at full load, CRI>80, Avg Life Class 50000Hrs @L70, CCT 3000K, complete in all respect,
245	SUPPLY & FIXING UNIIn-Ground Linelight BBP403 LED50/WW 9W 24V L 1200 (Philips/Siems/or Equivalent)
246	SITC LED Wall Washer 20 Watt IP66 having system efficacy of 100 LPW with pressure die cast aluminium housing with 3000 K CCT. Wipro Cat.Code : LF01-181-XXX-30-G1 or Equivalent in Philips , LT, Regent.
247	Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. 1200 mm sweep ceiling fan
248	Supply, Installation, Testing and Commissioning of 400mm wall fan
249	Supplying of following size exhaust fan complete with gravity louver and connection with 3 core flexible wire as required.300mm EXHAUST FAN
250	Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
251	8 way Double door
252	12 way Double door
253	Supplying and fixing following rating, four pole, 415 V, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required
254	40 amps 4P MCB
255	63 amps 4P MCB
256	Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
257	Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
258	Supply, installation, testing and commissioning of electrical panel, modular type, front accessible only, free floor standing confirming to Minimum IP:43 degree of protection. The panel sheet structure shall undergo seven tank pre-treatment process before painting. The sheet steel shall be all of 2.0mm thick CRCA sheet. All the openable compartments of the panel shall be completely shrouded and provided with padlocking arrangement on all compartments including bus bar and cable alley chambers. nt,The panel shall be manufactured in conformance to requirements of local electrical inspector and it shall be contractors responsibility to get initial approval of drawings and also final approval of complete electrical works related to this section.
259	Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Upto 35 sq. mm (clamped with 1mm thick saddle)
260	Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)
261	Supply of following siz of 1.1KV grade multicore aluminium conductor XLPE insulated and PVC shethed armoured cable as per IS 7098:1988 with up to date amendment 3.5 x 95 sq.mm
262	3.5 x 25 sq.mm.
263	3 x 6 sq.mm
264	Supplying and making cable end terminations with brass compression gland and aluminium lugs for following size of PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.2 X 6 sq. mm (19mm)
265	3½ X 25 sq. mm (28mm)
266	3½ X 95 sq. mm (45mm)
267	Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required. 150 MM DIA
268	Supplying and laying of following size DWC HDPE pipe ISI markedalong with all accessories like socket, bend, couplers etc.conforming to IS 14930, Part II complete with fitting and cutting,jointing etc.direct in ground (75 cm below ground level) includingexcavation and refilling the trench but excluding sand cushioningand protective covering etc., complete as required.90 mm dia (OD-90 mm & ID-76 mm nominal)
269	Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.150 mm wide x 50 mm depth x 1.6 mm thickness.
270	Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray \\"bends\\" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.150 mm wide x 50 mm depth x 1.6 mm thickness.
271	Supplying and installing following size of perforated Hot DippedGalvanised Iron cable tray \\"Tee\\" (galvanisation not less than 50microns) with perforation not more than 17.5%, in convenientsections, joined with connectors, suspended from the ceilingwith G.I. suspenders including G.I. bolts & nuts, etc. as required. 150 mm wide x 50 mm depth x 1.6 mm thickness.
272	LESS 5% DUE TO DEPTT. WORKING Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Uttar Pradesh Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Proposed Area Office Moradabads Building At Industrial Estatae Parsakhera District -Bareilly, Moradabad-Uttar Pradesh

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Proposed Area Office Moradabads Building At Industrial Estatae Parsakhera District -Bareilly, Moradabad-Uttar Pradesh

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us