|
| 1 | Earthwork excavation in hard of soil including stoney earth in foundation with all lifts, delifts and leads including dressing and levelling the bed and depositing excavated earth at place away from work site including dewatering, shuttering, cost of labour, royalty and T&P sundries required for the work etc. complete as per direction of Engineer-in-Charge. |
| 2 | Supplying and filling in foundation trenches and plinth, ditches with sand well watered and rammed in layers not exceeding 23 cm. in depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per direction by the Engineer in charge. |
| 3 | Cement concrete of proportion (1:3:6) in foundation and floors using 4cm size clean hard black C.B granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6\\") thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties and taxes of all materials with all labour and T&P required for the work etc. complete in all respect and as per the direction of the Engineer-in-charge. |
| 4 | Fly Ash brick masonary in cement mortar (1:6) in F&P using CB bricks 23cmX11 cm x8 cm size have been crushing strength not less than 35 kg /sqcm with dimension tolerance + 8 % including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projection watering and curing and after immersing the bricks in water atleast for 6 hours before use including cost conceyance royalties and taxes of all materials with all labour and T & P required for the work completer in all respect as per direction of Engineer-in-charge |
| 5 | Fly ash brick masonary in cement mortar (1:6) in super structure using CB bricks 23cmX11 cm x8 cm size have been crushing strength not less than 35 kg /sqcm with dimension tolerance + 8 % including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projection watering and curing and after immersing the bricks in water atleast for 6 hours before use including cost conceyance royalties and taxes of all materials with all labour and T & P required for the work completer in all respect as per direction of Engineer-in-charge |
| 6 | R.C.C. work of M20 in following works using 12 mm. to 20 mm. (½” to ¾”) size (20 mm. not to exceed 25%) hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per the direction of the Engineer-in-charge. COLOUMN BASE |
| 7 | plinth beam |
| 8 | Lintel |
| 9 | Column and beams |
| 10 | Providing, Cutting, Straightening coiled or bent up M.S.Road or tor steel of primary steel producers such as SAIL/Tiscon/RINL (Grade Fe-500D) etc. inclduing bending, binding, welding and jointing if necessary and tying the Grils and placing in position as requited for RCC work and for providng Fan Hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of MS Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (Payment will be made on standard weigh of B.I.S. for M.S. Rods or Tor Steel only) etc. complete as per specification and direction of engineering charge |
| 11 | Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. |
| 12 | Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. |
| 13 | Supplying, fitting and fixing vetrified tiles in floor of size 600mm x 600mm of approved make conforming to IS : 13755 laid on 20mm thick bed of C.M. (1:4)(1 cement : 4 course sand) and filling the joints with white cement of approved quality including cost of all materials,conveyance, taxes, labour, T&P etc. required for the work in all respect as directed by the Engineer in charge. |
| 14 | Finishing plastered surfaces of walls with cement base wall putty of approved make and finishing the surface smooth and even by sand papering to receive paint in walls, at all heights with staging wherever necessary with cost, conveyance, taxes of all materials, cost of all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge. |
| 15 | Painting two coats with plastic emulsion paint over a coat of water bond cement primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge. |
| 16 | wall painting 2 coats with weather coat paint of approved shade on new work to give an even shade including cost of paint and priming etc to complete Please Enable Macros to View BoQ information |