|
| 1 | Removal of bushes and vegetations with uprooting Down stream side , Up stream side & road side and disposing of the same as directed by the Engineer in charge of the works as per technical specification. |
| 2 | Dismantling the existing Mangalore tiles in the roof including cost of labour, lead, lift, and transporting the debries away from the site and including reduction realization of scap value which to be taken away by the contractor , etc.,complete complying with standard specifications. |
| 3 | Dismantling the existing Corrugated Iron Sheet in the roof including cost of labour, lead, lift, transporting the debries away from the site and including reduction realization of scap value which to be taken away by the contractor etc., complete complying with standard specifications. |
| 4 | Dismantling the existing AC sheet roof including cost of labour, lead, lift and transporting the debries away from the site and including reduction realization of scap value which to be taken away by the contractor etc., complete complying with standard specifications. |
| 5 | Dismantling the existing Doors and Windows , Ventilator including removal of frames, hinges, fastenings including cost of labour, lead, lift, and transporting the debries away from the site including reduction realization of scap value which to be taken away by the contractor etc., complete complying with standard specifications. |
| 6 | Dismantling the existing framed timbers in roof including cost of labour, lead, lift, and transporting the debries away from the site including reduction realization of scap value which to be taken away by the contractor etc., complete complying with standard specifications. |
| 7 | Dismantling the existing Brick / RR masonry wall including cost of labour, lead, lift, transporting the debris away from the site etc., complete complying with standard specifications. |
| 8 | Dismantling the existing PCC Concrete including cost of labour, lead, lift, transporting the debris away from the site etc., complete complying with standard specifications. |
| 9 | Chipping the cement concrete and roughening the surface including cost of labour, lead, lift, transporting the debris away from the site etc., complete. |
| 10 | Earth work excavation in hard stiff clay, stiff black cotton, hard red earth, shale, murram gravel, stoney earth & earth mixed with small size boulders and hard gravelly soil and depositing the earth in the places shown by the Engineer with initial lead of 10 M and initial lift of 2 m etc., complete, for upstream side retaining wall, kerb wall and fencing work complying with standard specifications. |
| 11 | Removal of slipped earth |
| 12 | For Foundation |
| 13 | Refilling with earth including cost of all materials, labour, lead, lift etc., complete for building basement as per specification and as directed by the Engineer at site. |
| 14 | Filling with M Sand in basement including cost of all materials lead, lifts etc., complete. |
| 15 | Providing and placing in position Plain Cement Concrete1:3:6 (one cement, three sand, and six part of aggregate) using broken hard granite coarse aggregate (well graded) of nominal maximum size of 40mm and downgraded to I.S specified grading and mixing the ingredients in approved mixer including placing in layers and vibrating, curing, finishing the surface with all leads and lifts, labour etc., complete for foundation of retaining wall, kerb wall, fencing post and building basement as per the direction of the Engineer and complying with standard specifications. |
| 16 | Providing and placing in position Plain Cement Concrete1:2:4 (one cement, two sand, and four part of aggregate ) using broken hard granite coarse aggregate (well graded) of nominal maximum size of 40mm & 20 mm and downgraded to I.S specified grading and mixing the ingredients in approved mixer including shuttering charges, placing in layers and vibrating, curing, finishing the surface with all leads and lifts, labour etc., complete for upstream side retaining wall and kerb wall as per the direction of the Engineer and complying with standard specifications. |
| 17 | Providing and placing in position Plain Cement Concrete1:2:4 using broken hard granite coarse aggregate size of 20 mm and down graded including shuttering charges,placing in layers and vibrating, curing, finishing the surface with all leads and lifts, labour etc., complete as per the direction of the Engineer and complying with standard specifications. |
| 18 | Providing Random rubble masonry in cement mortar 1:5 using new hard granite stones including bond stones wherever found necessary and curing, cost and conveyance of all materials etc., complete as per the direction of the Engineer in charge and complying with standard specifications. |
| 19 | Including cost of stones |
| 20 | Providing and placing in position RCC M 20 Grade with minimum cement content of 360 Kg/ m3 for Reinforced Cement Concrete using broken hard granite coarse aggregate size of 20mm downgraded and mixing the ingredients in approved mixer including shuttering charges, placing in layers and vibrating, curing, finishing the surface with all leads and lifts, labour etc., complete but excluding cost of steel reinforcement as per the direction of the Engineer and complying with standard specifications. |
| 21 | Plinth beam |
| 22 | Lintel |
| 23 | Sunshade |
| 24 | Roof Slab |
| 25 | Precast slab |
| 26 | Supplying, fabricating and placing in position of RTS rods of required size for all reinforced cement concrete works including cost of binding wire, steel rods, conveyance charges, cutting, bending, tying with all lead, lift and labour charges etc., complete, complying with standard specifications and as directed by the Engineer at site. |
| 27 | Brickwork in cm 1:5 using chamber burnt class II ground moulded brick of size 23x11x7cm including cost of all materials, leads, lifts etc., complete for superstructures. |
| 28 | Plastering with CM 1:5, 12mm thick for brick wall including cost of all materials, lead, lift etc., complete. |
| 29 | Plastering with cm 1:3, 10mm thick for ceiling including cost of all materials, lead, lift etc., complete. |
| 30 | Plastering with cm 1:3, 20mm thick for floor plastering including cost of all materials, lead, lift etc., complete. |
| 31 | Plastering with cm 1:5, 20mm thick for RR wall and steps including cost of all materials, lead, lift etc., complete. |
| 32 | Flush Pointing for RR Wall in building with cement mortar 1:3 (One of cement, three of sand by volume) including cost of all materials, labour, lead, lift etc., complete as per specification and as directed by the Engineer – in charge. |
| 33 | White washing with two coats of white cement of approved quality for inner walls and ceiling including cost of all materials, leads, lifts, etc., complete. |
| 34 | Colour washing using exterior emulsion two coats over one coat of Primer to the outer side of the dam parapet wall , gate pillar & building structures including scrapping , cleaning and cost of all materials, labour. T & P etc complete. |
| 35 | Supplying and fabrication and erection of structural steel of different size for placing of vertical and strut post for chain link fencing , Hand rail and other structural work including cost all materials ,lead, lift etc., complete. |
| 36 | Flooring with approval first quality Vitrified tiles 600x600x8mm size of approved Quality, design and colour (johnson or equivalent make) laid in cement mortar 1:3-20mm thick including pointing with same colored cement using 0.4Kg/Sq.m, finishing the joints including cost of all materials, labour, lead, lifts, transporting charges etc., complete. |
| 37 | Flooring with approval first quality Tactile Paver Type 305x305x 15mm size of approved Quality, design and colour laid in cement mortar 1:3-20mm thick including pointing with same colored cement using 0.4Kg/Sq.m, finishing the joints including cost of all materials, labour, lead, lifts, transporting charges etc., complete. |
| 38 | Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) size of 1200 x1200 mm Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSMand 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work and including cost of all materials, lead, lifts etc. complete. |
| 39 | Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of size 600 mmx 450 mm from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter.The corners and joints should be welded and cleaned.Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work including cost of all materials, leads, lifts etc., complete. |
| 40 | Providing of 35mm thick factory made pre-laminated ABS (Acrolynitrile Butadiene Styrene) Door Shutter moulded in different designs, consisting of all round frame made out of water proof solid foam PVC bar of size 20 x 32mm, reinforced by 32 x 32mm - 2 Nos., for vertical made out of LVL (Laminated Veneer Lumber), core material of 32mm thick high density craft paper honey comb board, sandwiched on both sides with pre-laminated ABS sheet thickness of 1.5mm. PVC edge banding of size 0.45mm on the vertical sides.Hardware made out of steel coated butterfly hinges - 3 Nos.,for each shutter and ISI make SS round lock complete for finished item of work, complete complying with the standard specification. The door shutter and frame should be got approved from the Executive Engineer before use on work including cost of all materials, leads, lifts etc., complete. |
| 41 | Supplying and fixing in position of Solid panel PVC with frame for door of suitable size and approved make and colour with all fittings fixtures cost of all materials, labours, lead, lift, etc., complete. |
| 42 | Painting with two coats approved enamel paint for wood work over one coat of primer coat including cost of all materials leads, lifts, etc., |
| 43 | Painting with two coats of approved enamel paint for steel work over one coat of primer including cost of all materials leads, lifts, etc., complete. |
| 44 | Painting for new iron works |
| 45 | Providing and placing with non slippery ceramic tiles of size 305mm x 305mm x6mm over cm 1:3, 20mm thick and pointed with cm including cost of all materials lead, lifts etc., complete. |
| 46 | Dadooing walls with Colour designed glazed tiles of size 300 mm x 200mm x 6mm in cm 1:2, 10mm thick and pointing with cement using 0.40kg/m3 including cost of all materials, leads, lifts, etc., complete. |
| 47 | Providing one course of pressed tiles of size 23x23x2cm as a wethering course over 20mm thick CM 1:3 mortar bed with required slope mixed in crude oil 10% by weight of cement and pointed with same at mortar over RCC roof slab thick including cost of all materials leads, lifts, etc., complete. |
| 48 | Supplying and fixing Indian water closet of size 580x440mm Parry Ware make or Equivalent of approved quality and colour with ‘P’ or ‘S’ trap conforming to IS 2556-Part XII with , packing the joints of the closet with the traps with asbestos rope using cement mixed with approved water proof compound, laying the closet over sand cushion and forming flooring around the closet using 40mm broken jelly in lime concrete 1:2:5 (One part of Lime, two part of sand and five part of brick jelly) of 100mm thick and finishing the top to required slope, connecting to soil pipes by dismantling the brick masonry/RCC slab making good the disturbed portion to original condition and finished water tight without leakage complying with standard specification for guard room as directed by the Engineer in charge including cost of all materials, Transporting, all labour, lead, lift, , T&P etc., complete. |
| 49 | Supplying and fixing of EWC with\\" P\\" or \\"S\\"trap with double flaped seat cover with brass hinges and 12.5 litre capacity porcelin low level flushing tank with all internal fittings ,CP two way bib cock with health faucet including cost of all material, labour for fixing, transportion, lead, lift, etc., complete. as directed by the Engineer in charge including cost of all materials, Transporting, all labour, lead, lift, , T&P etc., complete. |
| 50 | Supplying and laying, aligning in position with PVC pipe 110mm dia approved quality of 6 Kg/Sq.Cm for sewer line including , bend, elbow,Tee and cost of all materials leads, lifts etc., complete. |
| 51 | Supplying and fixing of PVC ( sintex) water tank 1000 litres capacity approved make and quality as per specification including cost of all materials, leads, lifts etc., complete. |
| 52 | Supplying and laying of UPVC pipe various size with standing of 10 Kg/cm2 for water line including cost of all materials, labour , leads, lifts etc., complete. |
| 53 | UPVC pipe 50 mm dia |
| 54 | UPVC pipe 25 mm dia |
| 55 | UPVC pipe 20 mm dia |
| 56 | Supplying and fixing of gun metal gate valve of various size including cost of all materials , labour ,leads, lifts, etc., complete. |
| 57 | Gun metal gate valve of 100 mm dia |
| 58 | Gun metal gate valve of 80 mm dia |
| 59 | Gun metal gate valve of 50 mm dia |
| 60 | Gun metal gate valve of 25 mm dia |
| 61 | Supplying and fixing of 20mm dia cromium coated bib cock of approved quality as directed by the engineer at site including cost of all materials , labour,lead lift etc, complete. |
| 62 | Supplying and laying of HDPE pipe PN 10 grade( PE 100 AS PER IS 4984/2016) indernal dia 75 mm and wall thickness of 10 mm having 10 kg/cm2 including transporting charges , electro fusion jointing ,cost of all materials, labour , leads, lifts etc., complete. |
| 63 | Wiring with 2x4sq. mm. (56/0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150mmx100mmx113mm TW switch box inflush with wall with 3mm thick hylem sheet cover for 15A 3pin flush type non interlocking wall socket with 15A flush types witch with painting of suitable colour with continuous earth wire connection of 14SWGTC wire for open PVC power plug point including cost of all materials , labour,lead lift etc, complete. |
| 64 | Wiring with 2 x 1.50 sq.mm. (22/0.3) PVC insulated cu unsheathed cu. conduit of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150x100x113 mm TW switch box for 5 A pin non interlocking CS plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point including cost of all materials , labour,lead lift etc, complete. |
| 65 | Wiring with 2 x 1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor cable of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switche Box in flush with wall with 5 A FT switches covered with hylum sheet of 3 mm thick with painting of suitable colours with continuous earth wire connection of 14 SWG TC wire for open PVC light / fan point (for electronic regulator) including cost of all materials , labour,lead lift etc, complete. |
| 66 | Supply and fixing of 20W 4 Feet LED Fitting with LED with TW round blocks on wall or ceiling with flu. tube with PVC unsheathed copper leads from terminal to the fitting including cost of all materials , labour,lead lift etc, complete. |
| 67 | Supplying and fixing of 15 W LED bulb of approved quality including cost of all materials ,labour, lead lift etc, complete. |
| 68 | Supply and fixing of 300mm (12\\") sweep (lightduty) AC exhaust fan complete with necessary wall opening and making good of the wall including cost of all materials ,labour, lead lift etc, complete. |
| 69 | Supply and fixing of louvers shutters arrangements for 300mm (12\\") sweep (light duty) AC exhaust fan including cost of all materials ,labour, lead lift etc, complete. |
| 70 | Supply and run of 2 of 6 sq.mm. (84/0.3) PVC insulated SC unsheathed copper conductor of 1100V on 7/20 GI bearer wire for service connection mains including cost of all materials , labour,lead lift etc, complete. |
| 71 | Supply and run of 4x6sq.mm.(84/0.3) PVC insulated SC unsheathed copper conductor of 1100V on 7/20 GI bearer wire for service connection mains including cost of all materials , labour,lead lift etc, complete. |
| 72 | Supplying and fixing of single phase main board with TW board of size 600mmx300 mm , 2 Nos of 63 Amps Porcelain Fuse Unit (500V) ,1 No 32 Amps DP Switch with Metal Clad (Side Handle),2 Nos 32 Amps Porcelain Fuse Unit (500V),1 No 32A neutral link, Earth link (1\\" x 1/8\\") copper flat , 4 Nos Tower Bolts of 150mm long and 12mm dia with PWD earthing including cost of all materials ,labour , lead lift etc, complete. |
| 73 | Supplying and fixing of three phase main board with TW board of size 900mmx450 mm , 4 Nos of 63 Amps Porcelain Fuse Unit (500V) ,1 No 32 Amps TP Switch with Metal Clad (Side Handle),4 Nos 32 Amps Porcelain Fuse Unit (500V),1 No 32A neutral link, Earth link (1\\" x 1/8\\") copper flat , 4 Nos Tower Bolts of 150mm long and 12mm dia with PWD earthing including cost of all materials ,labour , lead lift etc, complete. |
| 74 | Providing Cup-board Shutter using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt,handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer befoe use on work.including cost of all materials,labour, leads, lifts etc., complete. |
| 75 | Supplying and fixing of Granite Slab jet black 20 mm thick ,single nosing the edge, with CM 1:3, 20mm and pointed with coloured paste for use etc., including cost of all materials, leads, lifts etc., complete. |
| 76 | Supplying and laying in position of GI pipe 50 mm dia line of medium class ( B class) of TATA make or equivalent conforming to IS 1239 as directed by the Engineer in charge for water supply arrangements outside the Building including cost of all materials, specials such as Tees, bends, Couplings, screws cutting , threading, joining, specials, TW plugs, packing and wrapping the pipe laid underground with hessian cloth and tarring and fixing the pipe above ground to walls with galvanized iron clips lead, lift etc., complete. |
| 77 | Supplying and fixing of Cuddapah slab 40 mm thick CM 1:3, 20mm and pointed with coloured paste for use etc., including cost of all materials, leads, lifts etc., complete. |
| 78 | Supplying and fixing of 75 mm dia PVC pipe of working pressure 4 Kg/ cm2 for wheep hole for earth slipped Protection walls including cutting ,cost of all materials, leads, lifts etc., complete. |
| 79 | Supplying and laying of RCC NP3 900 mm dia RCC Hume pipe confirming to IS is 458/2003 including cost of pipe as a finished work including all other incidental charges, testing charges including loading, unloading, transport and delivery in good condition at work site ect.,complete, as directed by the site Engineer as per standard specification. |
| 80 | Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam specification including premixing the materials with water at OMC in mechanical mix plant carriage of mixed material by tipper to site laying in uniform layers with paver sin Sub Base / Base course on well prepared surface and compacting with vibratory roller to achieve the desired density including cost of material, labour charges,rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5 |
| 81 | Providing and laying Prime Coat over WMM surface using 7Kg of Emulsion Bitumen ( SS 1 ) per 10sqm for preparatory to another bituminous construction over it, including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per Clause 502 of MORTH Rev-5 as directed by the Engineer. |
| 82 | Providing and applying of Tack coat over existing BT surface using 2.00 Kg of Bituminous Emulsion (RS 1) per 10Sqm for preparatory to another bituminous construction over it including clearing of road surface, cost of materials , labour charges , rental for machinery , fuel and all other incidental charges ,etc complete as per Clause 503 of MORT&H and directed by the Engineer. |
| 83 | Providing and laying 50mm consolidated thick Bituminous Macadam using 0.20cum fo 26.50- 13.20mm, 0.43cum of13.20-2.36mm and 0.08cum of 2.36mm & below size IRC metal with 37 Kgs of VG30 / VG40 bitumen for premixing per 10 sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing the min required temperature in central hot mix plant20-30ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 50 mm with mechanical paver to the specified grades and cross sections and consolidated by8- 10 tonne Vibratory / Pneumatic Roller to the required density etc.,including labour forattending to paver to site etc.,including hire charges and fuel charges for 20-30t CMP with bitumen boiler, tipper trucks, Paver Finisher / 9m paver finisher, Vibratory / Pneumatic roller and all other tools and plant required, including fuel and all including fuel and all other incidental charges etc.,complete as per specification using CMP as per clause 504 of MORTH Rev-5 |
| 84 | Providing and laying Bituminous Concrete to 30 mm thick using 0.13 cum of 19.00- 9.50mm, 0.17cum of 9.50- 2.36 mm and 0.26 cum of 2.36 and below with 50.30 kgs of VG30 / VG40 bitumen for premixing per 10 sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing the min required temperature in central hot mix plant20-30 ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 4 0mm with mechanical paver to the specified grades and cross sections and consolidated by8-10 tonne Vibratory / Pneumatic Roller to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30 t CMP with bitumen boiler ,tipper trucks, Paver Finisher / 9 m paver finisher, Vibratory / Pneumatic roller and all other tools and plant required, including fuel and all other incidenta lcharges etc.,complete as per specification using CMP as per clause 507 of MORTH Rev-5 |
| 85 | Supplying and errection of 5 HP Portable water Pump and all accessories to the pump, ISI make including all accessories cost of all materials, leads, lift etc., complete. |
| 86 | Supplying fabrication erection of structural steel frames with support in the steel rod, cutting,welding, etc., painting two coats of enamel over one coat primer,fixing the steel Porcelene gauge plate (200 mm width) ,fixing in the up stream face of dam as instructed by the Engineer at site, including cost of all Material,labour,lead, lift transportation, etc. complete. |
| 87 | GST for bidders within TamilNaduNote : Bidders within Tamil Nadu shall enter values separately for SGST and CGST and shall enter the value as \\"Zero\\" for IGST. |
| 88 | GST for bidders outside TamilNadu Note: Bidders outside Tamil Nadu shall enter value only for IGST and shall enter the value as \\"Zero\\" for SGST and CGST |
| 89 | IGST Please Enable Macros to View BoQ information |
