|
| 1 | Percentage BoQ BoQ_Ver3.0 Percentage Normal INR Only INR Select, At Par, Excess (+), Less (-) IOCL Tender Inviting Authority: Executive Engineer, Project Public Health Division No.8, Chandigarh. Name of Work: Renovation of Type-1 H.no. 140, Ground Floor, Police Station, Sector - 26, Chandigarh. Contract No: Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 2.6 |
| 3 | All kinds of soil2.6.1 |
| 4 | Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :2.10 |
| 5 | All kinds of soil 2.10.1 |
| 6 | Pipes, cables etc, not exceeding 80 mm dia.2.10.1.1 |
| 7 | Pipes, cables etc. exceeding 80 mm dia. But not exceeding 300 mm dia2.10.1.2 |
| 8 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 4.1 |
| 9 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)4.1.3 |
| 10 | 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)4.1.10 |
| 11 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved 15.60 |
| 12 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :17.3 |
| 13 | W.C. pan with ISI marked white solid plastic seat and lid 17.3.1 |
| 14 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:17.7 |
| 15 | White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps 17.7.3 |
| 16 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: 17.10 |
| 17 | Kitchen sink without drain board17.10.2 |
| 18 | 610x460 mm bowl depth 200 mm17.10.2.2 |
| 19 | Providing and fixing 8 mm dia C.P. Jet with flexible tube upto 1 metre long with triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. 17.16A |
| 20 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete17.28 |
| 21 | Flexible pipe17.28.2 |
| 22 | 32 mm dia 17.28.2.1 |
| 23 | Providing and fixing soil, waste and vent pipes 17.35 |
| 24 | 100 mm dia 17.35.1 |
| 25 | Centrifugally cast (spun) iron socket &spigot (S&S) pipe as per IS: 398917.35.1.2 |
| 26 | 75mm dia17.35.2 |
| 27 | Centrifugally cast (spun) iron socketed pipeas per IS: 398917.35.2.2 |
| 28 | Providing and fixing heel rest sanitary bend17.40 |
| 29 | 100 mm dia 17.40.1 |
| 30 | Sand cast iron S&S as per IS - 398917.40.1.2 |
| 31 | Providing and fixing collar :17.57 |
| 32 | 100 mm17.57.1 |
| 33 | Sand cast iron S&S as per IS - 398917.57.1.2 |
| 34 | Providing and fixing collar :17.57 |
| 35 | 75mm 17.57.2 |
| 36 | Sand cast iron S&S as per IS - 398917.57.2.2 |
| 37 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :17.60 |
| 38 | 100 mm inlet and 75 mm outlet17.60.2 |
| 39 | Sand cast iron S&S as per IS - 3989 17.60.2.1 |
| 40 | Providing and fixing for laying, jointing, fixing and testing G.I. pipe lines and specials tees bends, sockets, elbows etc .inside building and testing etc. complete including cutting ,threading including cost of specials. i/c cutting and making good the walls etc. Internal work - Exposed on wall18.10 |
| 41 | 20 mm dia nominal bore18.10.2 |
| 42 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :18.11 |
| 43 | 15 mm dia nominal bore18.11.1 |
| 44 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :18.17 |
| 45 | 20 mm nominal bore18.17.1A |
| 46 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :18.18 |
| 47 | 20 mm nominal bore18.18.2 |
| 48 | Providing and fixing uplasticised PVC connection pipe with brass unions :18.21 |
| 49 | 30 cm length18.21.1 |
| 50 | 15 mm nominal bore18.21.1.1 |
| 51 | Providing and fixing G.I. Union in G.I. pipe including cutting and threadinghe pipe and making long screws etc. complete (New work) :18.46 |
| 52 | 15 mm nominal bore18.46.1 |
| 53 | 20 mm nominal bore18.46.2 |
| 54 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.18.48 |
| 55 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 18.49 |
| 56 | 15 mm nominal bore 18.49.1 |
| 57 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.18.51 |
| 58 | 15 mm nominal bore18.51.1 |
| 59 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.18.52 |
| 60 | 15 mm nominal bore18.52.1 |
| 61 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893118.53 |
| 62 | 15mm nominal bore18.53.1 |
| 63 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.18.53A |
| 64 | Cutting holes up to 30x30 cm in walls including making good the same18.76 |
| 65 | With common burnt clay F.P.S. (non modular) brick18.76.1 |
| 66 | Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.18.77 |
| 67 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:19.4 |
| 68 | 100x100 mm size P type19.4.1 |
| 69 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.519.4.1.1 |
| 70 | Dismantling C.I./ G.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge:NSR |
| 71 | Construction of curb with CC 1: 2: 4 along with upto 1.00 depth for made it proof water including cost of sand , bajri complete in all respect NSR |
| 72 | Providing and fixing CP Towel rail 600 mm complete in all respect as per entire satisfaction and approval of make by EIC.NSR |
| 73 | Providing and fixing of CP brass revolving joint shower, CP cup with arm complete in all respect NSR |
| 74 | Providing and fixing of drip seal joints complete in all respect NSR |
| 75 | 100 mm |
| 76 | 75 mm |
| 77 | Providing and fixing C.P. Soap dish holder complete in all respect as per entire satisfaction and approval of make by EIC.NSR |
| 78 | Providing and fixing C.P Cup heavy duty NSR |
| 79 | Providing and fixing of CP Brass towel ring complete at site for WHB as per approved make complete in all respect as per entire satisfaction and approval of make by EIC.NSR |
| 80 | Providing and fixing of tank nipple complete in all respect.NSR |
| 81 | 20 mm |
| 82 | Providing and fixing 550x400 mm beveled edge mirror of superior glass (of approved quality) complete with 5 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers completeNSR |
| 83 | Providing and fixing CP waste 32mm x 150mm long complete in all respect.NSR Total in Figures 101464.325 101464.325 INR One Lakh One Thousand Four Hundred & Sixty Four and Paise Thirty Two Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 INR Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
