|
| 1 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 2 | Material and labour for preparation of surfaces by cutting V groove all along the cracks and separation gap, removing all loose materials wash down by water, filling the cracks with polymer modified cement mortar @1 Kg cement :1.5 Kg sand with 2 litre acrylic polymer and allowed to air dry for 24 hours complete all as specified and directed.Make: - Fosroc/ SIKA / BOSTIK India Pvt Ltd. |
| 3 | Material and labour for carryout injection grouting by making 12mm dia drilling holes of depth upto 100mm at spacing of 500mm center to center including supply & fixing 12mm dia PVC nipple with ready to use mortar for plugging water leakage instantly and applying cement grouting @ 50 Kg cement mix with 1 Kg water resistant epoxy bonding agent and 200 grams expanding grout admixture complete all as specified and directed.Make: - Fosroc/ SIKA / BOSTIK India Pvt Ltd.Note: -(i) Work shall be carried out through authorised applicator of manufacturers as approved by GE.(ii) Contractor shall be provided guarantee for the water proofing of the pool bed for 10 years from certified date of completion of the work. |
| 4 | Material and labour for cleanning surfaces throughly to remove all loose particles, dust, dirts, oil greese, etc. which may effect bonding of waterproofing treatment and filling all openning of slab with polymer modified cement sand mortar 10mm thick CM admix with sika raintite @ 1 Kg cement : 1.5 Kg sand, 2 litre acrylic polymer and allowed the same to air dry for 24 hours. Moist the surfaces with water and try to keep the same in surfaces saturated dry condition, apply one coat of elastic liquid applied crack bridging, 2 pack acrylic cementious waterproofing coating with glass fibre fabric for coating reinforcement @ 1 Kg per Sqm and applying elastic liquid, applied crack bridging, 2 pack acrylic cementious waterproofing coating @ 1 Kg per Sqm complete all as specified and directed. Make: - Fosroc/ SIKA / BOSTIK India Pvt Ltd.Note: -(i) Work shall be carried out through authorised applicator of manufacturers as approved by GE.(ii) Contractor shall be provided guarantee for the water proofing of the pool bed for 10 years from certified date of completion of the work. |
| 5 | Material and labour for 10mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:3) and finish the surfaces even and smooth without using extra cement as in wall complete all as specified and directed. |
| 6 | Material and labour for swimming pool coloured mosaic tiles of sheet size 300mm x 300mm and chips size 23mm x 23mm and spacer 2mm as on floor surfaces of pool ( glassy). Tiles shall be fixed with tiles adhesive @ 10 kg per sqm or as per manufacturers instructions and filling the joints of tiles with epoxy mortar complete all as specified and directed. |
| 7 | Material and labour for swimming pool coloured mosaic tiles of sheet size 300mm x 300mm and chips size 23mmX23mm and spacer 2mm as on wall surfaces of pool (glassy/matt). Tiles shall be fixed with tiles adhesive @ 10 kg per sqm or as per manufacturers instructions and filling the joints of tiles with epoxy mortar complete all as specified and directed. |
| 8 | Supply and fix swimming pool diving board made of high quality special wood quoted with fibreglass of 300 GSM and 450 GSM impregnated with double ratio of high-quality polyester resin. The length of the diving board shall be of 16 feet / 4.8 m and the width shall be 500 mm. The thickness of diving board shall be of 1.5 inch to 2.5 inch. Diving board having top layer of UV protected and chemical resistant gel coat finish for longer durability. Diving board shall be anti- skid design to make the use of diving board more safe for the divers including SS 304 Hinges of suitable size for support of diving board and SS fulcrum of suitable size complete all as specified and directed. |
| 9 | Material and labour for joint free anti skid outdoor coloured pavement tiles (good grip series) of size 400 mm x 400mm x 10-12mm thick, coloured, set jointed and pointed in neat cement slurry with grey cement & pigment as in floor, path etc.includin laid over 20mm thick bedding/backing layer of mortar in CM (1:6) complete all as specified and directed. |
| 10 | Supply and fix stainless steel (Grade 304) railing/ hand rail made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 11 | Supply and fix mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars; barred iron doors; ladders, framed balusters, walk ways; railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 12 | Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 13 | Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc. and removing debrish from site complete all as specified and directed. |
| 14 | Demolition of brick work or stone boulder masonry, built in cement mortar including all quoins, arches, pillars etc. including removing of unserviceable material from site complete all as specified and directed. |
| 15 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided including removing of rubish from site complete all as specified and directed. |
| 16 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided including reinforcement cut as required to facilitate demolition and removing debries from site of work completeall as specified and directed. |
| 17 | Material and labour for removing all loose particles, cleaning, washing and applying polymer base bonding agent into the old concrete surfaces before new concrete is poured complete all as specified and directed. |
| 18 | Material and labour for RCC (1:1.5:3) (nominal mix) type B-1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 19 | Material and labour for mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed. |
| 20 | All as per item No 19.00 but 6mm dia and over upto and including 10mm dia in stirrups, spacers and binders and -ditto-. |
| 21 | Material and labour for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate ) as in foundation, filling and mass concrete complete all as specified and directed. |
| 22 | Dismantling of stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc. complete all as specified and directed. |
| 23 | Taking down chowkats or frames with shutters n.exc. 1.50 Sqm each (without taking off shutters from the frames) complete all as specified and directed. |
| 24 | Taking down chowkats or frames with shutters exc. 1.50 sqm but n.exc 4.00 sqm each (without taking off shutters from the frames) complete all as specified and directed. |
| 25 | Resecuring or easing and adjusting without taking down shutters for easy closing / opening, end tightening of butt hinges in position, adjustement of butt hinges in position, adjustement of existing iron mongry, size of shutter exc 1 sqm but n. exc 2 sqm each complete all as specified and directed. |
| 26 | Taking down chowkhats with shutter (without taking of shutter from the frame) exc.1.5 Sqm but n.exc 4.0 Sqm each and refixing in same / other opening with using hold fast, minor cement concrete work and making good complete all as specified and directed. |
| 27 | Material and labour for 10mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finish the surfaces even and smooth without using extra cement as in wall complete all as specified and directed. |
| 28 | Material and labour for 5mm thick rendering on concrete surfaces in cement mortar (1:3) and finish the surfaces even and smooth without using extra cement in ceiling complete all as specified and directed. |
| 29 | Material and labour for complete removal of existing treatement on old decorated surfaces of walls and applying two coats of 100% premium acrylic emulsion paint (camouflage pattern) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming one coat of exterior primer applied @ 0.90 litre/ 10 sqm including preperation of surface and scaffolding arrangement upto height 9mtr complete all as specified and directed. |
| 30 | Material and labour for preparation of new plastered surfaces of walls and applying two coats of acrylic washable distemper over a coat of alkali resistance primer including applying 2mm thick wall care putty complete all as specified and directed. |
| 31 | Material and labour for preparation of new plastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed. |
| 32 | Materials and labour for complete removal of existing treatment of old decorated surfaces of walls and applying two coats of acrylic washable distemper over a coat of alkali resistance primer including applying 2mm thick wall care putty including preperation of surface complete all as specified and directed. |
| 33 | Material and labour for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 34 | Material and labour for preparation of old decorated surfaces of wall and applying one coat of white wash complete all as specified and directed. |
| 35 | Material and labour for preparation of old decorated surfaces of ceiling and applying one coat of white wash complete all as specified and directed. |
| 36 | Materials and labour for half brick thick brick work with sub class `B` bricks, old size, straight or curved on plan to any radius built in cement mortar (1:4) complete all as specified and directed. |
| 37 | Material and labour for well-seasoned 2nd class hard wood plain fillets, square, rectangular or triangular insection, wrought, secured with nails or brads, sectional area exc. 13 sqcm but not exc. 25 sqcm complete all as specified and directed. |
| 38 | Supply and fix powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed. |
| 39 | Supply and fix powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed. |
| 40 | Material and labour for 12mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes as required including necessary stainless steel fixing arrangement complete all as specified and directed. |
| 41 | Supply and fix solid PVC wall lining consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC/Aluminium frame complete all as specified and directed. |
| 42 | Material and labour for second class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n. exc 200 cu. cm each complete all as specified and directed. |
| 43 | Suplly and fix 100mm size stainless steel butt hinges, medium weight, complete all as specified and directed. |
| 44 | Suplly and fix 150 mm long aluminum anodised barrel tower bolts extruded section complete all as specified and directed. |
| 45 | Supply and fix 100mm size aluminium alloy handles, cast type, anodised complete all as specified and directed. |
| 46 | Supply and fix 300mm long aluminium alloy, anodised, sliding door bolts with hasps, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. |
| 47 | Supply and fix in repair 300mm long aluminium alloy, anodised, sliding door bolts with hasps, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. |
| 48 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 49 | Supply and fix 5 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 Sqm in each pane complete all as specified and directed. |
| 50 | Supply and fix stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 51 | Material and labour for non-skid ceramic coloured tiles (premium quality) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exc. 0.38sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed. |
| 52 | Material and labour for glazed ceramic coloured tiles of size 600x1200x8-9 mm (premium quality) in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick cement plaster in cement mortar (1:3) complete all as specified and directed. |
| 53 | Material and labour for 25mm thick PCC (1:2:4) type B-0 (using 12.50mm graded stone aggregate) as in leveling course for laying floor/ roof finishes etc complete all as specified and directed. |
| 54 | Material and labour for 20mm thick jade black granite for top shelves (of any type) work (table rubbed and polished) in cupboard shelves, steps, jambs, window cills, cooking platforms and like in cement mortar (1:4) including pointing, grooving to wall etc with white cement using marble dust with admixture of pigment to match with shade of granite including moulding/nosing fixed independently complete all as specified and directed. |
| 55 | Material and labour for machine cut cudappah stone slab 20-25mm thick as in shelf including rubbing and polishing complete including taking down existing shelf complete all as specified and directed. |
| 56 | Material and labour for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 57 | Taking up or down 15 mm bore steel tubing and connections including removal from site complete all as specified and directed. |
| 58 | Taking up or down 20 mm bore steel tubing and connections including removal from site complete all as specified and directed. |
| 59 | Supply and fix 15 mm bore steel tubes medium grade, galvanised, with all fitting and fixed to walls, ceilings, roofs or laid in floors complete all as specified and directed. |
| 60 | Supply and fix 20 mm bore steel tubes medium grade, galvanised, with all fitting and fixed to walls, ceilings, roofs or laid in floors complete all as specified and directed. |
| 61 | Material and labour for cutting chases, pinning in brick wall making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing and making good, cutting not exc 10 cm girth complete all as specified and directed. |
| 62 | Supply and fix in repair 15mm bore stop valves, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 63 | Supply and fix in repair 15mm bore fancy type, chromium plated, two way, bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed. |
| 64 | Supply and fix in repair 15mm bore fancy type, chromium plated, bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed. |
| 65 | Supply and fix in repair 15mm bore angle cock fancy type, chromium plated, cast copper for iron pipe complete all as specified and directed. |
| 66 | Supply and fix in repair PVC connection pipe 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed. |
| 67 | Supply and fix in repair brass chromium plated shower rose 125mm size with or without swivel joint complete all as specified and directed. |
| 68 | Supply and fix in repair 15mm bore fancy type pillar tap cast copper alloy, chromium plated, swan neck type screwed down high pressure with long screwed shanks, screwed for iron pipe complete all as specified and directed. |
| 69 | Supply and fix in repair 125mm PTMT grating doom (minimum weight 40gms) complete all as specified and directed. |
| 70 | Supply and fix in repair vitreous china urinals, bowl type, white flat back of size 465x355x265 (back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, including 32mm dia CP waste coupling and urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (minimum weight 60gms) complete all as specified and directed. |
| 71 | Supply and fix in repair vitreous china wash down water closet pan (pedestal Pattern) white (excluding fixing bolts flusing cistern and flush pipe) including connection to drain (or out going pipe) and to flush pipe anti syphonage pipe including P or S trap fixed on floor complete all as specified and directed. |
| 72 | Supply and fix in repair plastic water closet seat black closed pattern with flat bottom and cover mild steel chromium plated or aluminium hinging device complete all as specified and directed. |
| 73 | Supply and fix in repair 10 litre capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and directed. |
| 74 | Supply and fix in repair vitreous china wash basin oval type counter top of size 550 x 400mm flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 75 | Supply and fix in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and direted. |
| 76 | Supply and fix in repair toilet paper holder, brass, chromium plated, fixed with stainless screw complete all as specified and directed |
| 77 | Supply and fix in repair 40mm bore high density polyethylene pipes (HDPE) with all fittings of pressure rating 6 kgf/sqcm fixed to walls, ceilings or in floors etc. complete all as specified and directed. |
| 78 | Supply and fix in repair looking mirror of size 600mm x 500mm x 5mm thick bevelled edge of selected quality glass, decorative type mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 79 | Supply and fix factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45X85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 80 | Supply and fix factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed.Note:- Stainless steel butt hinges with S.S screws shall be measured and paid seperately under respective items. |
| 81 | Supply and fix solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain coloured PVC sheet reinforced with mild steel square tube as per specification and drawing given on MES schedule Part–II (2020) complete all as specified and directed. |
| 82 | Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement as per specification and drawing given in SSR Part-II 2020 complete all as specified and directed. |
| 83 | Material and labour for cutting holes into or through brick wall built in cement mortar of superficial area not exc 150 sqcm and making good in CM (1:3) or cement concrete (1:2:4) type B-1 as required complete all as specified and directed. |
| 84 | Material and labour for welding in repairs n. exc 2.5cm in length, thickness of metal to be welded exc 6mm but n. exc 9mm complete all as specified and directed. |
| 85 | Dismantling of 100/75mm dia PVC pipe with all fittings in any position complete all as specified and directed. |
| 86 | Supply and fix 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls including stack clamp of suitable size complete all as specified and directed. |
| 87 | Supply and fix 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 88 | Supply and fix 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls including stack clamp of suitable size complete all as specified and directed. |
| 89 | Supply and fix 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 90 | Supply and fix 110mm bore PVC (SWR) juction single (single T) equal or unequal with access door complete all as speified and directed |
| 91 | Supply and fix 110 mm bore PVC (SWR) bends with access door any radius complete all as speified and directed. |
| 92 | Supply and fix 75mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 93 | Supply and fix 75mm bore PVC (SWR) juction single (single T) equal or unequal complete all as speified and directed. |
| 94 | Supply and fix in repair 75 mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed. |
| 95 | Supply and fix PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 96 | Supply and fix 32 mm bore brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified and directed. |
| 97 | Supply and fix in repair 32 mm bore PVC corrugated waste pipe 800mm long complete all as specified and directed. |
| 98 | Supply and fix in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 99 | Supply and fix in repair towel ring of CP fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 90gms) complete all as specified and directed. |
| 100 | Supply and fix in repair soap dish, brass chromium plated, fancy type, fixed to plugs with chromium plated fixed with brass screws complete all as specified and directed. |
| 101 | Supply and fix 6 door personal locker made of 0.50mm CRCA sheet with powder coated having inbuilt cam lock of overall size 0.45 (W) x 0.45 (D) x 1.95 (H) complete all as specified and directed.Make- PLU MAIN 6DR CAM LOCK model of Godrej or equivalent model of Methodex Sys Ltd/ Durian. |
| 102 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials from site and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed. Please Enable Macros to View BoQ information |
| 103 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials from site and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed. Please Enable Macros to View BoQ information |
