|
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.50 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.50 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 2 | Group C |
| 3 | Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. |
| 4 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. Approved make :- Havells, Crabtree (Athena), Anchor (Penta), Goldmedal (Gifa), Legrand (Arteor) & L&T (Entice). |
| 5 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.Approved make Havells, Crabtree (Athena), Anchor (Penta), Goldmedal (Gifa), Legrand (Arteor) & L&T (Entice). |
| 6 | Supplying and fixing electrical switch board, having 3 No. of 5 amp. switches and socket on suitable size of metal box of mm deep 6 modules(205mmx78mmx50mm on surface or in recess with suitable size phenolic laminated sheet cover in the front i/c providing and fixing 3 No. 5 pin 5/6 amp socket outlet and 5/6 amp modular type switch, connection, painting etc.as req.(For light plugs) |
| 7 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4sq mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.Make:--Havells, Finolex, RR Kabel, KEI, Polycab and Plaza. |
| 8 | Wiring for light/ power plug with 4X4sq. mm FRLS PVC insulated copper conductorsingle core cable in surface/ recessed steel conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 9 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. |
| 10 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 11 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 12 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 13 | 2 X 10 sq. mm + 1 X 6 sq. mm earth wire |
| 14 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 15 | 3x1.5 Sq. mm |
| 16 | Supplying and fixing PVC batten/ angle holder including connections etc. as required. |
| 17 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 18 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 19 | Supplying and fixing G.I. tape 20mm X 3mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) |
| 20 | Supplying and fixing G.I. tape 20mm X 3mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run) |
| 21 | Providing and fixing of lightning conductor finial, made of 25mm dia 300mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. |
| 22 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Approved make Havells,L&T , ABB, legrand ,Schneider & C&S. |
| 23 | Single pole |
| 24 | Supplying and fixing following rating, followings poles 10ka 240/415v 'C' curves miniature circuit braker suitable for inductive load of following poles in the exsisting MCB DB complete with connections, testing and commissioning etc. as required.Approved make Havells,L&T , ABB, legrand ,Schneider. |
| 25 | 63 A DP |
| 26 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator).Approved make Havells,L&T , ABB, legrand ,Schneider. |
| 27 | 12 way , Double door |
| 28 | 8 way , Double door |
| 29 | Providing and installation exhaust fan of following sizes in the existing opening, Double ball bearing type metal frame including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required: of Approved Make Domestic type.Approved Make Orient, Havells, Goldmedal,Bajaj & atomberg. |
| 30 | Exhaust Fan, Light duty, (Domestic) 225/230 mm sweep |
| 31 | Exhaust Fan, Light duty, (Domestic) 300 mm sweep |
| 32 | Supply, Installation, Testing and Commissioning of following sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.85, Air delivery minimum 215 CMM, 300 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote/ BLDC electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. Approved Make Atomberg (Efficio), Havells (EfficiaNeo), Orient (Hector 500) & Goldmedal (Marut), Bajaj (efficia). |
| 33 | Ceiling Fan 1200 mm sweep |
| 34 | Ceiling Fan 1400 mm sweep |
| 35 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 36 | S/E of LED Batten with aluminium extrusion housing The fitting should be installed on existing surface The job includes carriage, erection, making connections testing and commissioning of the fittings. Approved make: Bajaj, Havells, Panasonic, Philips, Wipro, LT, Changi. |
| 37 | Specification of LED fittings: |
| 38 | Wattage of LED fittings |
| 39 | Total lumens of the fittings. |
| 40 | Diffuser |
| 41 | Operating voltage |
| 42 | Input frequency |
| 43 | Power factor |
| 44 | Luminaire efficacy |
| 45 | Color rendering index |
| 46 | Working/ operating temperature |
| 47 | Color temperature |
| 48 | Electronic Driver |
| 49 | Drive current (LED) |
| 50 | Operating voltage |
| 51 | Type of driver |
| 52 | Surge Protection |
| 53 | Efficiency Driver |
| 54 | Protection |
| 55 | Guarantee of LED fittings including LED driver |
| 56 | Fixture |
| 57 | LED Type/ Make/ Model |
| 58 | Life of LED |
| 59 | Description |
| 60 | Lumen output of the fitting |
| 61 | LED Batten Light (2200 lumens) |
| 62 | S/E of LED Downlighter surface square with CRCA/PDC body and diffuser The fitting should be installed on existing surface The job includes carriage, erection, making connections testing and commissioning of the fittings.Approved make: Bajaj, Havells, Panasonic, Philips, Wipro, LT, Changi |
| 63 | Specification of LED fittings: |
| 64 | Wattage of LED fittings |
| 65 | Lumen output of the fitting |
| 66 | Diffuser |
| 67 | Operating voltage |
| 68 | Input frequency |
| 69 | Power factor |
| 70 | Luminaire efficacy |
| 71 | Color rendering index |
| 72 | Working/ operating temperature |
| 73 | Color temperature |
| 74 | Electronic Driver |
| 75 | Drive current (LED) |
| 76 | Operating voltage |
| 77 | Type of driver |
| 78 | Surge Protection |
| 79 | Efficiency Driver |
| 80 | Protection |
| 81 | Guarantee of LED fittings including LED driver |
| 82 | Fixture |
| 83 | LED Type/ Make/ Model |
| 84 | Life of LED |
| 85 | Lumen output of the fitting |
| 86 | Square LED Down Light Surface(1500 lumens) |
| 87 | Square LED Down Light Surface(2000 lumens) |
| 88 | Providing and installation of following type of LED retrofit lamp B-22 holder base with polycarbonate body and aluminium heat sink; suitable for input voltage: AC 220-240 V, 50/60Hz, including mounting in existing fixture, testing etc. as required complete in all respects. Make: Philips, Syska, GE, Bajaj, C&S, Panasonic or any other approved by Engineer-in-Charge. |
| 89 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. |
| 90 | Supplying and erection of light sub - panel (confirming to (IEC code-61439 part 1&2) of dimensions 700mm(H)*500mm(W)*200mm(D) with plus 5cm variation,made from CRCA MS sheet enclosure. Panel will be fabricated with 16-SWG CRCA sheet steel for load bearing surfaces and 16-SWG for non load bearing surfaces fully dust & vermin proof,complete with locking arrangements to hose MCCB 63 amp (4 pole) 25 KA with TMA Protection release (Ics=100% Icu) as incommer and 63 Amp Copper busbar(300 mm copper strips lenth) TPN of Electronic Grade E91 & 1 set RYB light indicator set and cable alley as required complete in all respects including the cost of switchgear . The cubical pedestal shall have cable entry box at one side,with epoxy powder coated approved paint and bonding to the existing earth etc. (i) 63 A Sub Panel |
| 91 | Supplying and erection of heating sub - panel (confirming to (IEC code-61439 part 1&2) of dimensions 800mm(H) X 600mm (W) X 200mm(D) with plus 5cm variation,made from CRCA MS sheet enclosure. Panel will be fabricated with 16-SWG CRCA sheet steel for load bearing surfaces and 16-SWG for non load bearing surfaces fully dust & vermin proof, complete with locking arrangements to hose MCCB 200amp (4 pole) 25KA with TMA Protection release (Ics=100% Icu) as incommer and 200Amp Copper busbar TPN of Electronic Grade E91 & 1 set RYB light indicator set and cable alley as required complete in all respects including the cost of switchgear. The cubical pedestal shall have cable entry box at one side,with epoxy powder coated approved paint and bonding to the existing earth etc. (i) 200 A Sub Panel. |
| 92 | P/F openable sheet metal shutter suitable for exhaust fan size 300mm as required complete in all respect. |
| 93 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. confirming to IS 14930 Part-II complete with fitting and cutting, jointing etc. in the existing trench,complete as required. Make:- Astral Pipes, Precision Pipe or any other approved by the Engineer in Charge. |
| 94 | 120MM Dia (OD-120MM & ID-103 MM Nominal) |
| 95 | Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes on wall surface as required.Approved Make: Universal Cables, Havells, Grandlay, Kei & Polycab. |
| 96 | Armoured cable 35 sq. mm (3.5 core) |
| 97 | Armoured cable 120 sq. mm (3.5 core) |
| 98 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 99 | 5/6 amps switch |
| 100 | 3 pin 5/6 A socket outlet |
| 101 | Supply, Fabrication and erection of GI pipe (medium class) bracket with suitable size of nipple for mounting the existing street light fitting with the following specifications. |
| 102 | The bracket shall be made by Medium Class GI pipe of 2” dia with an angle of inclination of as 105 degree to vertical |
| 103 | The 2” dia G.I. pipe shall be connected to a 4” dia G.I. pipe (45 cms) as required & canopy with top end closed with 14 G MS sheet to avoid entry of rain water in the pole. |
| 104 | The 2” dia pipe shall be welded at a distance of 2” from the close end with 4” dia GI pipe |
| 105 | The bracket shall be slipped over the top section of octagonal pole & fixed with 2 Nos. ½” dia GI nuts & bolts. |
| 106 | A triangular 14 G MS sheet pieces of 2” shall be welded between two pipes. |
| 107 | Single arm bracket made out of 2” dia. G.I. pipe 3’ overhang. |
| 108 | S/E of LED Street Light IP 66 rated with aluminium body/PDC housing.The job includes carriage, erection, making connections testing and commissioning of the fittings.The Specification of the Fittings is as under :- |
| 109 | Wattage of LED fittings :-As per following parameter. |
| 110 | Total lumens of the LED fittings |
| 111 | Body of fitting :-Pressure dia cast aluminium body with Extruded Aluminium heat sink |
| 112 | Input frequency :-50 Hz + 1 Hz |
| 113 | Operating voltage- 140 V to 270 V, AC supply or better. |
| 114 | Power factor :-Minimum 0.90 |
| 115 | Luminaire efficacy :->110 lm/w |
| 116 | Color rendering index:-CRI shall be greater than 70 |
| 117 | Working/ operating temperature :-00 to + 450c or better |
| 118 | Color temperature :-6000ºK to 65000K |
| 119 | Electronic Driver :- |
| 120 | Drive current (LED) :-As per OEM. |
| 121 | Operating voltage :-140 V to 270 V AC supply or better |
| 122 | Type of driver :-Constant current output driver |
| 123 | THD :-Less than 10% |
| 124 | Surge Protection :-(10 KV minimum External) ( 4 KV Internal) |
| 125 | Efficiency Driver:->85% |
| 126 | Protection:-Shall have under voltage and over voltage protection. |
| 127 | Guarantee of LED fittings including LED driver :-5 years against manufacturing defect. |
| 128 | Fixture :-Should comply with LM 79 test from UL/NABL lab. |
| 129 | LED Type/ Make/ Model:-Havells/Bajaj/Panasonic with life more than 50,000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer. |
| 130 | Life of LED:-50000 burning hours at 70% lumen maintenance |
| 131 | LED Street Light 45/50 Watt. |
| 132 | Approved Makes. |
| 133 | Steel Conduit :-BEC,AKG,RKG, Precision Pipes |
| 134 | PVC Conduit:-Anchor, AKG,RKG, Precision Pipes, Diplast. |
| 135 | FRLS Wires:-Havells, Finolex, RR Kabel, KEI, Plaza, Polycab. |
| 136 | Switches/ sockets (Premium):- Havells, (Athena), Goldmedal (AIR) (GIFA). Anchor (Penta) Legrand (Arteor), L&T (Entice) |
| 137 | MCB’s and Distribution board:- Havells, ABB, Legrand, L&T, Schneider. ( Distribution board and MCB has to be of same company). |
| 138 | MCCB’s and switchgear:- Havells, ABB, Legrand, L&T, Schneider. |
| 139 | Bus bars Copper:- Havells, Anchor |
| 140 | Geyser:- Havells, racold, bajaj,Goldmedal, jaguar ( 5 star rated). |
| 141 | Cat 6:- Havells, Legrand, R&M, Systimax, Panduit, Molex |
| 142 | Ceiling fan, BLDC:- Atomberg (Efficio), Havells (Efficia Neo), Orient (hector 500), Gold Medal (Marut), Bajaj (efficial) (5star rated) |
| 143 | Ventilating fans BLDC Plastic body:- Atomberg, Havells, Orient, Gold Medal, Bajaj. |
| 144 | Exhaust fans:- Atomberg, Havells, Orient, Gold Medal, Bajaj. |
| 145 | LED lights polycarbonate body:- Bajaj, havells, Goldmedal,Panasonic, Philips, Wipro, Changi ( If quantity of LED fittings exceeds 50 in number then testing of fittings is mandatory ), L&T. |
| 146 | LED lights PDC/CRCA body:- Bajaj, Havells, Panasonic, Philips, Wipro, L&T, Changi. ( If quantity of LED fittings exceeds 50 in number then testing of fittings is mandatory ) |
| 147 | LED Lights UGR<19:- Bajaj, Havells, Philips, Wipro, L &T, Changi. |
| 148 | Armoured Cables/ Unarmoured Cables:- Univesal, KEI, Havells, Grandley, Polycab. Please Enable Macros to View BoQ information |
