|
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required:- |
| 2 | Group C. |
| 3 | Wiring for twin control light point with 1.5sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, 2way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required:- |
| 4 | Group C. |
| 5 | Wiring for light/ power plug with 2 X 4 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 6 | Wiring for light/ power plug with 4 X 4sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 2No. 4sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 7 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. Make:--Havells, Finolex, RR Kabel, KEI, Polycab and Plaza. |
| 8 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 9 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 10 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 11 | 2 X 10 sq. mm + 1 X 6 sq. mm earth wire |
| 12 | 2 X 16 sq. mm + 1 X 6 sq. mm earth wire |
| 13 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 14 | 3 x 1.5 sq. mm |
| 15 | 3 x 2.5 sq. mm |
| 16 | Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes on wall surface as required. Make:--Havells, Finolex, RR Kabel, KEI, Polycab and Plaza. |
| 17 | Armoured cable 6 sq. mm (2 core) |
| 18 | Armoured cable 35 mm (3.5 core) |
| 19 | Armoured cable 50 mm (3.5 core) |
| 20 | Armoured cable 95 sq. mm (3.5 core) |
| 21 | Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. |
| 22 | Armoured cable 6 sq. mm (2 core) |
| 23 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 24 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 25 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 26 | 5/ 6 amps switch. |
| 27 | 3 pin 5/6 A socket outlet |
| 28 | Telephone socket outlet |
| 29 | Supplying and fixing electrical switch board, having 3 No. of 5 amp. switches and socket on suitable size of metal box of 75mm deep 12 module (200mmX150mm) on surface or in recess with suitable modular sheet cover in the front i/c providing and fixing 3 No. 5 pin 5/6 amp socket outlet and 5/6 amp modular type switch, connection, painting etc.as req. (For light plugs).Make:- havells, Anchor or any other approved by the Engineer in Charge . |
| 30 | Supplying and fixing PVC batten/ angle holder including connections etc. as required. |
| 31 | Supplying and fixing of fancy wall bracket suitable for input voltage: AC 220- 240 V, 50/60Hz, complete with all accessories, lamp holder, but excluding lamp including making connections, testing etc. as required: of Approved .Make:-Havells, Phillips or any other approved by the Engineer in Charge:- Decorative Wall light fixture, made up of polycarbonate suitable for 9 W retrofit LED lamp B22 base. |
| 32 | Providing and installation of following type of LED retrofit lamp B-22 holder base with polycarbonate body and aluminium heat sink; suitable for input voltage: AC 220-240 V, 50/60Hz, including mounting in existing fixture, testing etc. as required complete in all respects. Make: Havells, Wipro or any other approved by Engineer-in-Charge. |
| 33 | LED Lamp .5 Watt ( Green) |
| 34 | LED Lamp .5 Watt ( Red) |
| 35 | LED lamp 9 Watt |
| 36 | S/E of LED Batten with polycarboante body and diffuser The fitting should be installed on existing surfaceThe job includes carriage, erection, making connections testing and commissioning of the fittings. |
| 37 | Specification of LED fittings:- |
| 38 | Wattage of LED fittings :-As per following parameter. |
| 39 | Total lumens of the fittings. :-as below |
| 40 | Diffuser :-Polycarbonate diffuser/PMMA |
| 41 | Operating voltage :-140 V to 270 V, AC supply or better. |
| 42 | Input frequency :-50 Hz + 1 Hz |
| 43 | Power factor :-Minimum 0.90 |
| 44 | Luminaire efficacy :->100 lm/w |
| 45 | Color rendering index:-CRI shall be greater than 80 |
| 46 | Working/ operating temperature :-0ºC to + 45º C or better |
| 47 | Color temperature :-6000ºK + 10% |
| 48 | Electronic Driver :- |
| 49 | Drive current (LED):-As per OEM. |
| 50 | Operating voltage :-140 V to 270 V AC supply or better |
| 51 | Type of driver :-Constant current output driver |
| 52 | THD :-Less than 10% |
| 53 | Surge Protection :-2.5 KV minimum |
| 54 | Efficiency Driver:->85% |
| 55 | Protection:-Shall have under voltage and over voltage protection. |
| 56 | warranty of LED fittings including LED driver :-5 years against manufacturing defect. |
| 57 | Fixture :-Should comply with LM 79 test from UL/NABL lab. |
| 58 | LED Type/ Make/ Model :-Power CREE/ OSRAM/ NICHIA/ Philips LUMILED with life more than 25,000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer. |
| 59 | Life of LED :-25000 burning hours at 70% lumen maintenance |
| 60 | LED Batten Light 1000 Lm |
| 61 | S/E of LED Batten with aluminium extrusion housing The fitting should be installed on existing surface The job includes carriage, erection, making connections testing and commissioning of the fittings. |
| 62 | Specification of LED fittings:- |
| 63 | Wattage of LED fittings :-As per following parameter. |
| 64 | Total lumens of the fittings. :-as below |
| 65 | Diffuser :-Polycarbonate diffuser/PMMA |
| 66 | Operating voltage :-140 V to 270 V, AC supply or better. |
| 67 | Input frequency :-50 Hz + 1 Hz |
| 68 | Power factor :-Minimum 0.90 |
| 69 | Luminaire efficacy :->110 lm/w |
| 70 | Color rendering index:-CRI shall be greater than 80 |
| 71 | Working/ operating temperature :-0ºC to + 45º C or better |
| 72 | Color temperature :-6000ºK + 10% |
| 73 | Electronic Driver :- |
| 74 | Drive current (LED):-As per OEM. |
| 75 | Operating voltage :-140 V to 270 V AC supply or better |
| 76 | Type of driver :-Constant current output driver |
| 77 | THD :-Less than 10% |
| 78 | Surge Protection :-2.5 KV minimum |
| 79 | Efficiency Driver:->85% |
| 80 | Protection:-Shall have under voltage and over voltage protection. |
| 81 | warranty of LED fittings including LED driver :-5 years against manufacturing defect. |
| 82 | Fixture :-Should comply with LM 79 test from UL/NABL lab. |
| 83 | LED Type/ Make/ Model:-Power CREE/ OSRAM/ NICHIA/ Philips LUMILED with life more than 50,000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer. |
| 84 | Life of LED:-50000 burning hours at 70% lumen maintenance |
| 85 | LED Batten Light 20W (2200 Lm) |
| 86 | S/E of LED Downlighter round type surface with CRCA/PDC body and diffuser The fitting should be installed on existing surface The job includes carriage, erection, making connections testing and commissioning of the fittings. |
| 87 | Specification of LED fittings:- |
| 88 | Wattage of LED fittings :-As per following parameter. |
| 89 | Lumen output of the fitting:-as below |
| 90 | Diffuser :-Polycarbonate diffuser/PMMA |
| 91 | Operating voltage :- 140 V to 270 V, AC supply or better. |
| 92 | Input frequency :-50 Hz + 1 Hz |
| 93 | Power factor :-Minimum 0.90 |
| 94 | Luminaire efficacy :->100 lm/w |
| 95 | Color rendering index:-CRI shall be greater than 80 |
| 96 | Working/ operating temperature :-0ºC to + 45º C or better |
| 97 | Color temperature :-6000ºK + 10% |
| 98 | Electronic Driver |
| 99 | Drive current (LED):-As per OEM. |
| 100 | Operating voltage :-140 V to 270 V AC supply or better |
| 101 | Type of driver :-Constant current output driver |
| 102 | THD :-Less than 10% |
| 103 | Surge Protection :-2.5 KV minimum |
| 104 | Efficiency Driver:->85% |
| 105 | Protection:-Shall have under voltage and over voltage protection. |
| 106 | warranty of LED fittings including LED driver :-5 years against manufacturing defect. |
| 107 | Fixture :-Should comply with LM 79 test from UL/NABL lab. |
| 108 | LED Type/ Make/ Model:-Power CREE/ OSRAM/ NICHIA/ Philips LUMILED with life more than 50,000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer. |
| 109 | Life of LED:-50000 burning hours at 70% lumen maintenance |
| 110 | Round LED Down Light W Surface ( 500 Lm) |
| 111 | Round LED Down Light Surface ( 1500 Lm) |
| 112 | S/E of LED Downlighter surface square with CRCA/PDC body and diffuser The fitting should be installed on existing surface The job includes carriage, erection, making connections testing and commissioning of the fittings. |
| 113 | Specification of LED fittings:- |
| 114 | Wattage of LED fittings :-As per following parameter. |
| 115 | Lumen output of the fitting :-as below |
| 116 | Diffuser :-Polycarbonate diffuser/pmma |
| 117 | Operating voltage :-140 V to 270 V, AC supply or better. |
| 118 | Input frequency :-50 Hz + 1 Hz |
| 119 | Power factor :-Minimum 0.90 |
| 120 | Luminaire efficacy :->100 lm/w |
| 121 | Color rendering index :-CRI shall be greater than 80 |
| 122 | Working/ operating temperature :-0ºC to + 45º C or better |
| 123 | Color temperature :-6000ºK + 10% |
| 124 | Electronic Driver :- |
| 125 | Drive current (LED) :-As per OEM. |
| 126 | Operating voltage :-140 V to 270 V AC supply or better |
| 127 | Type of driver :-Constant current output driver |
| 128 | THD :-Less than 10% |
| 129 | Surge Protection :-2.5 KV minimum |
| 130 | Efficiency Driver :->85% |
| 131 | Protection :-Shall have under voltage and over voltage protection. |
| 132 | warranty of LED fittings including LED driver :-5 years against manufacturing defect. |
| 133 | Fixture :-Should comply with LM 79 test from UL/NABL lab. |
| 134 | LED Type/ Make/ Model :-Power CREE/ OSRAM/ NICHIA/ Philips LUMILED with life more than 50,000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer. |
| 135 | Life of LED :-50000 burning hours at 70% lumen maintenance |
| 136 | Square LED Down Light 2400 lm |
| 137 | S/E of LED Panel with PDC body and prismatic diffuser to be mounted in Surface. The job includes carriage, erection, making connections testing and commissioning of the fittings. |
| 138 | Specification of LED fittings:- |
| 139 | Wattage of LED fittings :-As per following parameter. |
| 140 | Total lumens of the fittings. :-as below |
| 141 | Diffuser :-Prismatic multilayer diffuser |
| 142 | Operating voltage :-140 V to 270 V, AC supply or better. |
| 143 | Input frequency :-50 Hz + 1 Hz |
| 144 | Power factor :-Minimum 0.90 |
| 145 | Luminaire efficacy :->120 lm/w |
| 146 | Color rendering index :-CRI shall be greater than 80 |
| 147 | Working/ operating temperature :-0ºC to + 45º C or better |
| 148 | Color temperature :-6000ºK + 10% |
| 149 | Electronic Driver :- |
| 150 | Drive current (LED) :-As per OEM. |
| 151 | Operating voltage :-140 V to 270 V AC supply or better |
| 152 | Type of driver :-Constant current output driver |
| 153 | THD :-Less than 10% |
| 154 | Surge Protection :- 2.5 KV minimum |
| 155 | Efficiency Driver :->85% |
| 156 | Protection :-Shall have under voltage and over voltage protection. |
| 157 | warranty of LED fittings including LED driver :-5 years against manufacturing defect. |
| 158 | Fixture :-Should comply with LM 79 test from UL/NABL lab. |
| 159 | LED Type/ Make/ Model :-Bajaj/Havells/Crompton with life more than 50,000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer. |
| 160 | Life of LED :-50000 burning hours at 70% lumen maintenance |
| 161 | Square LED Panel Light Surface Mounted ( 2 feet x 2 feet ) 4320 Lm |
| 162 | S/E of LED bulk head IP 66 rated with aluminium body/PDC housing The fitting should be installed on existing surface The job includes carriage, erection, making connections testing and commissioning of the fittings. |
| 163 | Specification of LED fittings:- |
| 164 | Wattage of LED fittings :-As per following parameter. |
| 165 | Total lumens of the fittings. :-as below |
| 166 | Diffuser :-Polycarbonate diffuser/PMMA |
| 167 | Operating voltage :-140 V to 270 V, AC supply or better. |
| 168 | Input frequency :-50 Hz + 1 Hz |
| 169 | Power factor :-Minimum 0.90 |
| 170 | Luminaire efficacy :->80 lm/w |
| 171 | Color rendering index:-CRI shall be greater than 80 |
| 172 | Working/ operating temperature :-0ºC to + 45º C or better |
| 173 | Color temperature :-6000ºK + 10% |
| 174 | Electronic Driver :- |
| 175 | Drive current (LED):-As per OEM. |
| 176 | Operating voltage :-140 V to 270 V AC supply or better |
| 177 | Type of driver :-Constant current output driver |
| 178 | THD :-Less than 10% |
| 179 | Surge Protection :-2 KV minimum |
| 180 | Efficiency Driver:->85% |
| 181 | Protection:-Shall have under voltage and over voltage protection. |
| 182 | warranty of LED fittings including LED driver :-5years against manufacturing defect. |
| 183 | Fixture :-Should comply with LM 79 test from UL/NABL lab. |
| 184 | LED Type/ Make/ Model:-Power CREE/ OSRAM/ NICHIA/ Philips LUMILED with life more than 50,000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer. |
| 185 | Life of LED:-50000 burning hours at 70% lumen maintenance |
| 186 | LED Bulk Head 10 Watt ( 800 Lm) |
| 187 | Supply, Installation, Testing and Commissioning of following sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.85, Air delivery minimum 215 CMM, 300 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote/ BLDC electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required with five year warranty. |
| 188 | Ceiling Fan 1200 mm sweep |
| 189 | Ceiling Fan 1400 mm sweep |
| 190 | Supplying and fixing Metal fan box as required complete in all respect as per statifaction of Er-in- charge etc . |
| 191 | Providing and installation exhaust fan of following sizes in the existing opening, Double ball bearing type metal frame including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required: of Approved Make Domestic type. |
| 192 | Exhaust Fan, Light duty, (Domestic) 225/230 mm sweep |
| 193 | Providing and installation exhaust fan of following sizes in the existing opening, Double ball bearing type metal frame including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required: of Approved Make Heavy Duty type. |
| 194 | Exhaust Fan, Heavy duty, 300 mm sweep (900/1400rpm) |
| 195 | P/F openable sheet metal shutter suitable for exhaust fan size 300 Inch as required complete in all respect. |
| 196 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. |
| 197 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 198 | Single pole |
| 199 | Supplying and fixing following rating, followings poles 10ka 240/415v 'C' curves miniature circuit braker suitable for inductive load of following poles in the exsisting MCB DB complete with connections, testing and commissioning etc. as required. |
| 200 | 40 A DP |
| 201 | 63 A DP |
| 202 | 63 A FP |
| 203 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker with overcurrebt protection (RCBO), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.(i) RCBO 25A 30 MA |
| 204 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 205 | 6 way , Double door |
| 206 | 8 way , Double door |
| 207 | 12 way , Double door |
| 208 | Supplying, Installation, Testing & Commissioning of Low Voltage Panel suitable for 415 V, 3 Phase, 4 wire 50 Hz AC supply system as per standard IEC 61439 Part 1 & 2.The LT Panel Enclosure Cubicles shall be design verified assemblies completely as per IEC61439-1&2 having IP42 enclosure protection having form 4B construction duly tested with IK10, shall be of aesthetic design, dust, damp & vermin proof, shall be modular, extendable and shall have maintenance friendly construction, shall have fully compartmentalized bolted construction, shall be metal clad sheet steel enclosed cubicle, floor mounting type suitable for indoor installations, shall have structural steel framework as per IEC 61439 part 1 & 2, shall have integral base frame with bottom cable entry having removable gland plates. The panel shall be made out of GI Sheet Steel & CRCA Sheet Steel. The CRCA Steel parts shall be powder coated with RAL7035 powder colour after proper 7 Tank Chemical Treatment. Gasketing shall be done properly to prevent any ingress of dust & vermin . The LT panel should have provision of following switchgear and accessories as mentioned below: - |
| 209 | MCCB 250A 4Pole 36KA , With O/L S/C Protection -1 No. |
| 210 | 250/320A Copper Bus bar TPN of Electrolytic Grade E91 having Cross Section 1x30x10 MM per Phase ,1x30x10 MM for Neutral and Earthing Strip 1x20x10MM |
| 211 | Metering |
| 212 | Digital VAF Meter-1 Set |
| 213 | CT,s 800/5A-3 Nos. |
| 214 | Phase Indication Set with Control MCB SP -1 Set |
| 215 | OUTGOING SECTION |
| 216 | Space for Energy meter 3 Phase |
| 217 | Size Of Panel :-1050MM(W)X 13500MM(H)x250MM (D) |
| 218 | Meter Panel 250A |
| 219 | Supplying and erection of Main LT panel (confirming to (IEC code-61439 part 1&2) of dimensions 700mm(H)*700mm(W)*250mm(D) with plus 5cm variation,made from CRCA MS sheet enclosure. Panel will be fabricated with 16-SWG CRCA sheet steel fully dust & vermin proof,complete with locking arrangements to hose MCCB 100 amp (4 pole) 25 KA with TMA Protection release (Ics=100% Icu) as incommer and 100 Amp Copper busbar TPN of Electrolytic Grade E91 Having Cross Section 1x 25x6 MM for Phase and Neutral and 1x 25 x 3 MM for Earth Strip for outgoing Ckt. i/c RYB light indicator set and cable alley as required complete in all respects including the cost of switchgear . The cubical pedestal shall have cable entry box at one side,with epoxy powder coated approved paint and bonding to the existing earth etc. (i) LT panel 100A ( PTTA) |
| 220 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 221 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 222 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. |
| 223 | Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. |
| 224 | Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required. |
| 225 | Providing and fixing G.I. tape 20mm X 3mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) |
| 226 | Providing and fixing G.I. tape 20mm X 3mm thick on parapet or surface of wall for lightning conductor complete as required (For horizontal run) |
| 227 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. Make:-Astral Pipes, {recision pipes or any other approved by the Engineer in Charge. |
| 228 | 63 mm dia (OD-63 mm & ID-50 mm nominal) |
| 229 | 120 mm dia (OD-102 mm & ID-120 mm nominal) |
| 230 | S/E of 5 Mtr. long Hot dipped Galvanized pole of octagonal cross-section continuously tapered made out from high tensile steel of minimum thickness 3mm complete with the base plate of minimum size 200mm x200mm x12mm alongwith inbuilt lockable junction box which should be operated with single key with connectors of Elmax / Connectwell / Essen / Wago make for the cable termination as per site requirement and one no. 6 Amps. Single pole MCB for each luminaire. The diameter across from the dimensions of the base and top should be minimum 130 mm and 70mm A/F (Across Face). The size of the poles and foundation bolts shall be suitable to withstand the maximum wind speed/ pressure as per IS-875. There should be no any circumferential welding on the pole. The method and material shall comply with as BSEN-10025 grade S355 or equivalent poles should be hot dipped galvanized in single dip to 65 microns min. confirming to IS 2629-1966. The material and specifications of flange plate/base plate shall be as per IS 2062. The street light poles shall be as per IS 2062. The street light poles shall be erected in the existing RCC foundation with 4 nos. special foundation bolts ‘J’ type minimum 600mm long galvanized M.S. rod of duly threaded of minimum 20mm dia in existing RCC foundation of suitable size as per the approved drawing. The material of steel foundation belts shall be confirming to grade EN-8 exposed threaded portion of foundation bolts shall be hot dipped galvanized. The octagonal pole should be of Bajaj / Transrail / Utkarsh / Valmont/ Salasarmake only. (The cost of 5 Meter long S/L octagonal poles is including with 4 nos. x M16 x 600mm long ‘J’ type bolts with nuts, carriage of pole at site & installation complete as required. |
| 231 | GI Octagonal Light Pole-5m Long |
| 232 | Pole Foundation |
| 233 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 Sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soiwithin a lead of 50m.All kinds of soil |
| 234 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) |
| 235 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars |
| 236 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement:1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 237 | Centering and shuttering including strutting, propping etc. and removal of form for :Foundations, footings, bases of columns, etc. for mass concrete Size |
| 238 | Supply, Fabrication and erection of GI pipe (medium class) bracket with suitable size of nipple for mounting the existing street light fitting with the following specifications. |
| 239 | The bracket shall be made by Medium Class GI pipe of 2” dia with an angle of inclination of as 105 degree to vertical |
| 240 | The 2” dia G.I. pipe shall be connected to a 4” dia G.I. pipe (45 cms) as required & canopy with top end closed with 14 G MS sheet to avoid entry of rain water in the pole. |
| 241 | The 2” dia pipe shall be welded at a distance of 2” from the close end with 4” dia GI pipe |
| 242 | The bracket shall be slipped over the top section of octagonal pole & fixed with 2 Nos. ½” dia GI nuts & bolts. |
| 243 | A triangular 14 G MS sheet pieces of 2” shall be welded between two pipes. |
| 244 | Single arm bracket made out of 2” dia. G.I. pipe 3’ overhang. |
| 245 | Double arm bracket made out of 2” dia. G.I. pipe 3’ overhang. |
| 246 | S/E of LED Street Light IP 66 rated with aluminium body/PDC housing.The job includes carriage, erection, making connections testing and commissioning of the fittings.The Specification of the Fittings is as under :- |
| 247 | Wattage of LED fittings :-As per following parameter. |
| 248 | Total lumens of the LED fittings |
| 249 | Body of fitting :-Pressure dia cast aluminium body with Extruded Aluminium heat sink |
| 250 | Input frequency :-50 Hz + 1 Hz |
| 251 | Operating voltage- 140 V to 270 V, AC supply or better. |
| 252 | Power factor :-Minimum 0.90 |
| 253 | Luminaire efficacy :->110 lm/w |
| 254 | Color rendering index:-CRI shall be greater than 70 |
| 255 | Working/ operating temperature :-00 to + 450c or better |
| 256 | Color temperature :-6000ºK to 6500ºK |
| 257 | Electronic Driver :- |
| 258 | Drive current (LED) :-As per OEM. |
| 259 | Operating voltage :-140 V to 270 V AC supply or better |
| 260 | Type of driver :-Constant current output driver |
| 261 | THD :-Less than 10% |
| 262 | Surge Protection :-(10 KV minimum External) ( 4 KV Internal) |
| 263 | Efficiency Driver:->85% |
| 264 | Protection:-Shall have under voltage and over voltage protection. |
| 265 | warranty of LED fittings including LED driver :-5 years against manufacturing defect. |
| 266 | Fixture :-Should comply with LM 79 test from UL/NABL lab. |
| 267 | LED Type/ Make/ Model:-Havells/Bajaj/Panasonic with life more than 50,000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer. |
| 268 | Life of LED:-50000 burning hours at 70% lumen maintenance |
| 269 | LED Street Light 45 Watt |
| 270 | Supplying, Installation, testing & commissioning of LED post top luminary with High pressure die cast aluminum housing & with ingress protection of IP65. The luminaire should have high power LED modules with complete system consumption 20-25W for lighting 360°(Degree) around the pole , system efficiency not less than, 80 lm / watt. CCT 3000-5700K with electronic driver having PF > 0.9, THD < 20%, 2.5KA SPD . The fixture should have suitable dia. for existing pole entry complete with driver, and all electrical accessories complete as required with minimum five years Warrenty on Manufacturing defects. Make :- Bajaj, havells, Twinkle or any other Approved by the engineer in Charge .( LED Post TOP Luminaire 25 W) |
| 271 | Supplying and Fixing of Cable Junction Box IP66/67 weather proof for outdoor installation including making connections testing etc. asd required . Make :- Hensal , L&T or any other approved by the Engineer in Charge. |
| 272 | Supply Installation Testing & Commissioning of Cat6 UTP Information Outlet -Blue (Data). Should be PCB free and Tool less will be added advantage with halozn free. User Side. As per specification. Make : R&M/D-link/Molex. |
| 273 | SITC of UTP Face Plate (Single/dual) complete in all respect upto the entire satisfication of Engineer in charge. Make : R&M/D-link/ Molex. |
| 274 | Supply Installation Testing & Commissioning of Cat6 Patch Cords - 1Mtr -Blue ( Data Rack Side), As per specification. Make: R&M/D-link/Molex. |
| 275 | Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. |
| 276 | 1 run of cable |
| 277 | 2 run of cable |
| 278 | 3 run of cable |
| 279 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 280 | 25 mm Dia |
| 281 | Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 282 | 1 Pair Telephone Wire |
| 283 | 2 Pair Telephone Wire |
| 284 | Approved Makes. |
| 285 | Steel Conduit :-BEC,AKG,RKG, Precision Pipes |
| 286 | PVC Conduit:-Anchor, AKG,RKG, Precision Pipes, Diplast. |
| 287 | FRLS Wires:-Havells, Finolex, RR Kabel, KEI, Plaza, Polycab. |
| 288 | Switches/ sockets (Premium):- Havells, (Athena), Goldmedal (AIR) (GIFA). Anchor (Penta) Legrand (Arteor), L&T (Entice) |
| 289 | MCB’s and Distribution board:- Havells, ABB, Legrand, L&T, Schneider. ( Distribution board and MCB has to be of same company). |
| 290 | MCCB’s and switchgear:- Havells, ABB, Legrand, L&T, Schneider. |
| 291 | Bus bars Copper:- Havells, Anchor |
| 292 | Geyser:- Havells, racold, bajaj,Goldmedal, jaguar ( 5 star rated). |
| 293 | Cat 6:- Havells, Legrand, R&M, Systimax, Panduit, Molex |
| 294 | Ceiling fan, BLDC:- Atomberg (Efficio), Havells (Efficia Neo), Orient (hector 500), Gold Medal (Marut), Bajaj (efficial) (5star rated) |
| 295 | Ventilating fans BLDC Plastic body:- Atomberg, Havells, Orient, Gold Medal, Bajaj. |
| 296 | Exhaust fans:- Atomberg, Havells, Orient, Gold Medal, Bajaj. |
| 297 | LED lights polycarbonate body:- Bajaj, havells, Goldmedal,Panasonic, Philips, Wipro, Changi ( If quantity of LED fittings exceeds 50 in number then testing of fittings is mandatory ), L&T. |
| 298 | LED lights PDC/CRCA body:- Bajaj, Havells, Panasonic, Philips, Wipro, L&T, Changi. ( If quantity of LED fittings exceeds 50 in number then testing of fittings is mandatory ) |
| 299 | LED Lights UGR<19:- Bajaj, Havells, Philips, Wipro, L &T, Changi. |
| 300 | Armoured Cables/ Unarmoured Cables:- Univesal, KEI, Havells, Grandley, Polycab. Please Enable Macros to View BoQ information |
